GE washing machine wont' spin or agitate fix 

Hi everyone I noticed some people asking about the fuse, here is another link I found on ebay shorturl.at/horG0

This guy's video saved me a ton of time and money! Thank you!

thanks for this! tested my fuse and was bad. i watched several vids before this and no one mentioned this. bob

Dude thank you so much for this video, this is exactly what I was looking for - I replaced the lid switch which but it still didn't run, and I had a feeling it wasn't the motor, then I stumbled upon this video and I knew it was EXACTLY the problem. I ordered the part off Amazon and tried it, and it worked perfectly. Thanks for posting this video!

This is exactly what my problem was. Replaced the thermal fuse link and it works perfectly now. Thx. Yippee.

Thanks for the info. Have the same problem.

Thank you very much, . . I crawled all over that washer looking for the fuse, . I knew it wasn't the motor. I almost bought a board thinking it was bad, even though no error codes came up. . Mine was hidden behind that same black tape. . Thank you very much. Saved me $$$

Perfect - thanks for posting this.

I cut out the blown fuse and bypassed it with some wire and it did turn on the motor and agitated and spun but I am getting the four blinking LED codes error, check mode shifter coil, i’ll just buy a new washer because the part is like $250

Thank you

Your awesome

Hi, thanks for the video. I have the same problem, I removed the wire tape and located the red/white wire but still can see the fuse. any lead please

Cool bro help me big time

in your video today can you show how to please pull down the outer driver drum and your GE washer inside the front panel please? In your video today can you show how to please pull down the outer driver drum and your GE washer inside the front panel please? ?

Hi there great video...just a little confused. I'm I looking for the same type of connection that you ordered on Amazon (thermal fuse)? Or I'm I just splicing the red and white wire and attaching the " thermal fuse wire"? Thanks

This GE is hydrowave washing machine Model wjre5500g1ww if that helps anyone and the link to the part in the description.

Can use that same fuse on my whdsr316g5ww ge washer.

Thanks alot!! What the name of the wire?

I found the wire but cant find the fuse where exactly was it located. I cut off all the black tape but no fuse😊

I think this might be my problem. I have the exact same washer. My washer will not start. It just makes a noise like it wants to start.

My neighbors washing machine will wash and spin the clothes. It starts to act up during the rinse cycle. The water does not fill up during the rinse cycle, then it spins but does not drain. Then the machine simply shuts down. You have to unplug the machine to reset it. Which in some cases could take a few hours. Do you think this could be the thermal switch? I tried the control board with no success.

So the problem wasnt from the motor? I thought it was the motor but ill try to change the fuse first thank you buddy

Good morning I am having the same issue as you had but tried getting that thermal fuse you purchased and cant find it anywhere tried everything even bypassed the door switch and now have it direct but cant find the part number or correct name for the the thermal fuse (red and white cable for my washer. Please help 🙏

Can you help me with the lid switch part number thanks in advance

What the blinking light on the motor show. Mine is blinking normally. Off and on. Which I should assume means it’s working. Please help sir.

Do you have to use ge's specific fusible link or can I just create my own fuse link and get it to work?

I have a question, the clips that you pop off to get the front off. Was hard to take the front off after you pop the clips? I can't seem to get pass that! Could someone help me?

What if there is no fuse wire .? I did find the color coded wire but it runs all the way to the board from motor

I don;t understand, I mean I see the wire, I have the exact same washer, How do you know that is the wire that it's bad and where do you cut it or what section? Sorry, just trying to fix this same problem. The motor does have a blinking green light.

The thermal fuse part is part number WH49X1005

Interested to know how he determined that was the problem.

Hello,engineer, I have the same type of washing machine that is filled with water, but it does not work and the program works, but after filling it with water, the clothes do not spin

Anyone tried bypassing this fuse?

Thank you