Тёмный

Washing Machine Wont Spin/Agitate DIY Fix: Fills With Water 

jeffostroff
Подписаться 493 тыс.
Просмотров 230 тыс.
50% 1

In this DIY repair video, we cover the Washing Machine DIY Repair, and how to fix your washing machine when it fills up with water but wont spin or agitate. We cover the repair for 2 common root causes to your washer not spinning, and one is the washer lid pressure switch. Same ideas apply if you have a front loading washer with a door, so the door switch would be inspected here to see if it needs to be replaced. We also cover the common washing machine not spinning failure of the motor coupling failing, and how to repair this washer motor issue.
🛒 Whirlpool 8318084 Lid Switch for Washer: amzn.to/3fZZVIy
🛒 DeWalt ToughSystem 2.0 Full 3 Piece Tower : homedepot.sjv.io/OjOBr
🛒 DWST08450 ToughSystem 2.0 Large Mobile Toolbox: homedepot.sjv.io/z74qr
🛒 DWST08300 Toughsystem 2.0 Medium Toolbox: homedepot.sjv.io/q7yNY
🛒 DWST08165 Toughsystem 2.0 Small Toolbox: homedepot.sjv.io/B6P1y
🛒 DEWALT DG5582 Electrical and Maintenance Tool Carrier: amzn.to/2Gm8IoO
🛒 DeWalt ToughSystem Workshop Racking Storage System homedepot.sjv.io/M92n2
🛒 Milwaukee 2457-20 M12 Cordless 3/8" Lithium-Ion Ratchet (Bare Tool) amzn.to/3ejUfY5
🛒 Ryobi P344 Cordless 3/8 in. 4-Position Ratchet Home Depot Only: homedepot.sjv.io/g2G55
🛒 Milwaukee 2131-20 M18 ROCKET Dual Power Tower Light (Tool Only): Amazon: amzn.to/2YXdeU7
🛒 Milwaukee 2131-20 M18 ROCKET Dual Power Tower Light (Tool Only) Home Depot: homedepot.sjv.io/m7G1D
These videos mentioned in this tool review:
📺 WATCH:Dewalt Toughsystem 2.0 Tool Review, Drop Testing, Likes/Dislikes: • Dewalt Toughsystem 2.0...
📺 WATCH: Tonneau Cover Game Changer: Review Pickup Truck Bed Covers Ford F150: • Tonneau Cover Game Cha... From our CarBuyingtips.com RU-vid Channel
📺 WATCH: DeWalt Deep Pro Organizer Vs. Milwaukee: Which Is Best? • DeWalt Deep Pro Organi...
📺 WATCH: DeWalt, Craftsman Drill Bit Sets | Clever Hack 99% Don't Know: • DeWalt, Craftsman Dril...
📺 Keter Folding Work Table Tool Review, DROP Tests Work Bench: / 2rcuwnzwoa
📺 WATCH: • Ryobi EZ Clean Cordles... Ryobi EZ Clean Cordless Power Cleaner Tool Review/Testing RY120350
📺 WATCH: • Ryobi Hack Converts EZ... Ryobi Hack Converts EZ Clean Pressure Cleaner to Quick Connect
From Our CarBuyingTips.com Channel:
📺 WATCH: • Best Wheel Cleaner? Me... Best Wheel Cleaner? Meguiar's Vs Sonax Vs Griot's Garage
Washing machine won't agitate
Usually, when you encounter washing machine won't agitate problems, symptoms for your washer are the washer fills but won't agitate or spin . After the washing machine fills up with water, it won't start spinning. You find the washer machine agitator in your washer is not agitating. The easiest DIY repair for your washing machine not spinning is check the door switch on your washer. That's the switch that makes a clicking sound when you open and close your washer lid for top loader washing machines, and you open and close the door on front loader washers. If you don't hear the washer machine lid switch clicking, then you need to replace that washer door switch, normally costs about $30-$40 for the part.
With your washing machine door switch failure mode, the reason for your washer not agitating or spinning is the switch has malfunctioned, your washing machine thinks the door is open, even when it is closed. So your washer won't spin, because of safety features in your washing machine. It will still fill with water, but you can have the door open while it fills, you can still add laundry, but the washer door must be closed by the end of the water filling cycle, or your washer won't agitate. If you have a washing machine not agitating or spinning, test your door switch first, that is the fastest repair.
Another failure mode for washing machine won't spin problems
If you find the Kitchenaid washing machine door switch working, you can try the other washing machine won't spin root cause, often the motor couplers, or washer motor drive belt. Older Kitchenaid washers typically had a direct drive washer motor connected to a gear case instead of a belt drive. But newer washing machine motors are made cheap by manufacturers with a belt drive. Another common cause for the washer fills but won't agitate or spin error is a worn or broken washer motor belt if your washer is built with one.
Washer won't spin or drain
You might be led to think that your washer won't spin or drain, but they do drain. If they don't drain but you still hear the motor noise, then your water pump which attaches the washing machine motor has likely stripped at the connection point and needs to be replaced. This video is of a KitchenAid washer machine model# KAWS750LQ2, but these DIY repair fixes presented here apply to many washers appliance models, from Whirlpool, kitchenaid washers, and others. Whirpool builds KitchenAid washer machines and other appliances for numerous companies.
#washerwontspin #jeffostroff #diy

Хобби

Опубликовано:

 

22 июл 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 166   
@storeman08033
@storeman08033 3 года назад
Saved me $750. Words cannot express my family’s gratitude. Thanks a lot
@jeffostroff
@jeffostroff 3 года назад
Glad it helped! that's awesome savings!
@stephenfallis9374
@stephenfallis9374 Год назад
Hey Jeff. Just wanted to tell you that all your hard work and great information you did for us on the tragic event of Champaign towers is awesome stuff.. thanks its kinda cool to see you over here in the crazy washing machine fixes.
@smichalpi
@smichalpi 11 месяцев назад
thank you for making this video. It gave me the courage to replace the lid switch myself on my old Inglis washing machine. It worked! I ordered a replacement switch on amazon!!! Thank you!! Saved me a lot of money!
@VideoBoat
@VideoBoat 2 года назад
Excellent video... I just tested my older Worldpool washer and found that my lid switch sounded absolutely fine. So i was hoping that it would be obvious that is was bad, but it looked AND sounded fine. Since I had the back cover already oped, I decided to make a small alligator clip jumper to mimic a brand new switch. Since the plastic is old and brittle, it damn near destroyed itself , just trying to get the switch harness out of the washing machine. So I need to order a replacement anyway. I was shocked when I set the dial to spin and empty, and plugged it back in the wall. It actually started spinning. I'm about to order a replacement lid switch. Thanks for the great tip. It put me in the right direction..
@jeffostroff
@jeffostroff 2 года назад
Glad to help, thanks for watching
@Sugar_And_Salt_Look_Alike
@Sugar_And_Salt_Look_Alike Год назад
I'm a single mom of two. You just safe my life by following your guidance here. The machine died on me few days ago while washing the kids' school uniform. I smell a little burnt smell.. Worrying I migth have to spend 600-700$ for a new one that it could take weeks to replace.. So I look up lots of vid here.. until I found your clip which have exactly opening like mine to get into lid switch. I order the part online. Get it the next day and change the lid switch myself. less than 30 mins, my washer is back to live. Thank you very much for your sharing. Blessed be 🙏
@jeffostroff
@jeffostroff Год назад
Awesome Penny, glad to help!
@bennyhill3642
@bennyhill3642 Год назад
That was AWESOME!!!
@buckflather2475
@buckflather2475 2 года назад
Jeff, thank you for the great, easy to follow and understand video! It helped me save a ton of time and money!!
@jeffostroff
@jeffostroff 2 года назад
Great to hear Buck!
@tessk9rescue
@tessk9rescue 2 года назад
Very bell done. Easy to understand. Thank you.
@lepageism
@lepageism 3 года назад
Very well explained and filmed. You make it so easy to do this. Thanks!
@marilynjones4158
@marilynjones4158 2 года назад
¹¹
@COWBOYZNATION
@COWBOYZNATION 3 месяца назад
Agreed. 👍
@alsautner1732
@alsautner1732 3 года назад
Great Video....You are very good with fixing stuff...!
@jeffostroff
@jeffostroff 3 года назад
Thanks 👍 glad you liked it Albert!
@kerryrus
@kerryrus 2 года назад
Thank you. It was... exactly what you said it might be, thank you for saving me time and money. It was the coupler.
@jeffostroff
@jeffostroff 2 года назад
Awesome, glad to help!
@e.m.5499
@e.m.5499 Год назад
Great video! You've a way of making this task look very easy.
@jeffostroff
@jeffostroff Год назад
Glad you think so!
@jorymills652
@jorymills652 3 года назад
Thanks for the video good sir!
@jeffostroff
@jeffostroff 3 года назад
You bet! thanks for watching tonight Jory!
@deankay4434
@deankay4434 3 года назад
This must be 20 years newer than my 35 year old GE that I by-passed the lid switch on abs later added heavier pull springs to motor because it’s belt drive. Don’t for get to live the sliders for smooth tight action. Mine is going into it’s 45 year of top load action. Had a capacitor fail to spin dry load as the motor is reversed. Capacitor is not attached to motor but my Fluke 87 type V has capacitance scale a cane now where close to rating on case. Well, $8.10 cent later, working like a champ. I did remove the centrifugal switch and cleaned the contacts with 400 grit sandpaper. This switch changes from high toque, low speed to high speed rates torque. Thanks for the video!
@COWBOYZNATION
@COWBOYZNATION 3 месяца назад
That's cool. I think you have gotten your moneys worth on that unit!!! 😁
@sdott313
@sdott313 Год назад
Fixed my issue thanks for the detailed video.
@jeffostroff
@jeffostroff Год назад
Thanks, I'm glad you liked it!
@wesleyfairbanks3801
@wesleyfairbanks3801 8 месяцев назад
Thanks Buddy.
@marrerodamion
@marrerodamion Год назад
great video jeff👍
@BobsWoodStuff
@BobsWoodStuff 3 года назад
Great video Jeff. Always good to see more info about appliance fixes.
@jeffostroff
@jeffostroff 3 года назад
Thanks 👍 Bob, Glad you could make it tonight!
@lewisgottschalk2178
@lewisgottschalk2178 3 года назад
Recommendation for some when disassembling projects like this is to take frequent pictures so you don't forget how things go back together.
@jeffostroff
@jeffostroff 3 года назад
Yes that is true. Or video as well.
@kevinwilliams848
@kevinwilliams848 3 года назад
Thank the very best I will thank the developers thank them and
@slingeroftruth
@slingeroftruth 2 года назад
And save them! I'm still looking for the videos and pics the last time I had fix mine, only a couple years ago. This must be one of the few videos out of hundreds that show this exact machine, without the easy front cover that also surprises those with the top front lock that I always thought was the lid switch, as well because you can't see the one in the back at all until you take that top cover off. Thank you so much for helping me remember what I had to deal with last time when both washer and dryer broke down the same day. Oh, the heavy loaders I live with will get a no heavy loaded washer mandate from me, this time. Kidding Aside from that, does that one reset that some do to lift the lid 6 times after powering off for over a minute and power back up, lift 6 times a couple inches in less than 15 seconds, within 30 second of plugging the power back in work on this machine, as well? My machine wouldn't spin or agitate, instead go through its start up while switch is set to spin and on it's last action spin light comes on but it instead starts to fill with water, no matter what I try, to get its brain to stop doing it. Thanks again for your videos if you happen to read this, it really helps me a lot in these and your found sales videos on tools.
@lansicus1160
@lansicus1160 Год назад
I thought I was too cool for that and now I’m here
@gillesgagnon6923
@gillesgagnon6923 Год назад
Merci beaucoup !!!
@stevenduke260
@stevenduke260 Год назад
Thank you
@msj6430
@msj6430 3 года назад
Jeff another great video
@jeffostroff
@jeffostroff 3 года назад
Thanks Noemy, glad you liked it
@mito0055
@mito0055 3 года назад
Good job Jeff and hello from ocala fl..
@jeffostroff
@jeffostroff 3 года назад
Thanks for watching tonight mito!
@Ohsnhapitsdenus
@Ohsnhapitsdenus 2 года назад
I like this guy.
@courty818
@courty818 Год назад
Hey Jeff, my washer was doing its job for about 5 minutes but then I had to pause it to add more clothes. It was pause for 4 minutes or so with the lid up. I put the lid down and now it won’t continue with the cycle. How to I get it to start going again? Do I follow these steps?
@jeffostroff
@jeffostroff Год назад
Maybe it got into a messed up state, try to unplug it and plug back in. IT could also be a coincidence that maybe the door switch broke when you opened it.
@bennyhill3642
@bennyhill3642 Год назад
Hello Jeff thank you for the Video. I ve got a frigidaire washer. Like 25 years old. My timer went out. Took it out cleaned contacts and still nothing, was thinking about using toggle switches and just stand there till each cycle was finished. Because really machine is to old can't get replacement part. And don't have really any money to do anything. 1st whT do you think about the toggle switch, and do you have any ideas.. I'm sure this would or could be a head scratcher lol I know it is for me, I've been looking at the wiring diagram. Thanks again
@ritasmith1033
@ritasmith1033 3 года назад
Thanks you very much👍👍
@jeffostroff
@jeffostroff 3 года назад
Welcome 👍
@Dooguy
@Dooguy 8 месяцев назад
i have a kenmore washer with lid lock. i did diag and have it narrowed down to the lid switch or the shifter/actuator. Any way to eliminate the lid lock switch to test to see if that is the issue vs buying both parts. Lost job..moneys tight. TY
@toolhead147
@toolhead147 3 года назад
I had trouble with mine shaking, it turns out it was the suport shocks, cost me just as much as a new used one to fix it. Didn't have a truck back then just decided to fix it.
@jeffostroff
@jeffostroff 3 года назад
We had an issue with our old washer 2 years ago that would have cost $600 to fix! Instead we went to Lowes, bought new Samsung washer and dryer, where it was $1100, marked down to $750 for a sale, then we used a 10% off Lowes coupon to save even more!
@johnnychour9918
@johnnychour9918 2 года назад
thank you so much s for your video
@jeffostroff
@jeffostroff 2 года назад
Thanks, I'm glad you liked it! Thanks, I'm glad you liked it!
@keithcronk7980
@keithcronk7980 3 года назад
GREAT JOB & EXPLAIN THE COMPLETE PROCESS
@jeffostroff
@jeffostroff 3 года назад
Thanks for the kind words Keith!
@keithcronk7980
@keithcronk7980 3 года назад
@@jeffostroff 🇺🇸🇺🇸🇺🇸🇮🇪🇮🇪
@quanoviahunter2327
@quanoviahunter2327 9 месяцев назад
Is there any recommendations on someone that can fix mine bc I don’t have the tools to take everything apart myself
@rafsewamg
@rafsewamg 2 года назад
Any recommendations for a washer not agitating but will spin out? Whirlpool imana ..agitator is one entire piece. If that helps🙂it’s not the lid switch lol
@rogeliosandoval6209
@rogeliosandoval6209 3 года назад
Thank u boss ..so much
@jeffostroff
@jeffostroff 3 года назад
Most welcome Rogelio
@elidaamparan1355
@elidaamparan1355 2 года назад
So helpfull
@jeffostroff
@jeffostroff 2 года назад
Glad you think so!
@buckmajor
@buckmajor 2 года назад
Thanks pretty good friend 🙂
@jeffostroff
@jeffostroff 2 года назад
No problem 😊
@wendykaubisch7046
@wendykaubisch7046 Год назад
My washer fills, agitates,, drains but Does Not spin. Is this a coupler?
@tensazero
@tensazero 3 года назад
This is WHY DeWalt needs to make an adapter plate for TSTAK to Tough System. Look how the ToughCase+ boxes just sit there in top of the TS boxes all loose and things. Instead of having to lift two cases, you could have just lifted one with everything snapped-in, clicked-in, and secured. They need to think literally outside the boxes.
@jeffostroff
@jeffostroff 3 года назад
That's a good idea for a 3rd party product.
@ccadama
@ccadama 3 года назад
@jeffostroff. Thanks for the video with great instructions. I'm also glad that you included the tip to clean up underneath the appliance. Just because no one can see underneath the appliance doesn't mean we can't take pride in a job done well. BTW: Is that Toughsystem 2.0 large tool box the one you dropped off your roof scaring your poor cat during the comparison tests? Hope you and your family stay safe and well.
@jeffostroff
@jeffostroff 3 года назад
Glad it was helpful! yes that is the 2.0 I dropped. I wanted to make sure I had it in this video for its impressive looks, and of course to add some affiliate links to the 2.0 in the video description!
@wlsonzor
@wlsonzor 3 года назад
Hey Jeff, seems like the switch replacement worked, but it what steps would you have taken if it was the coupling that was broken? Good source of parts for these older washers?
@jeffostroff
@jeffostroff 3 года назад
Like I mentioned in the video, when you seethe couplings, they just pull straight off the motor spindle. It requires a little bit of streetlight, as they are wedged onto the spindle tight.
@dannylinc6247
@dannylinc6247 2 года назад
I did an older machine like this for the coupler . We changed the pump out water pump while we were there, that far in. We also re-made the drum spring attach connections to give it a new area on them to wear. I learned alot. The supply house wouldn't get us new springs. I had to use a trick from the GM truck garage to open a new spring loop for attaching them to their links. Supply house said we needed a new machine. Nope. The owner replaced them (washer and dryer) and gave the good old ones to the delivery man. Isn't that just great.
@brianharley1283
@brianharley1283 Год назад
What if the cuppler doesn't spin when off? Does it mean something else or the same problem?
@LBCAndrew
@LBCAndrew 10 месяцев назад
I would have thought the older machines would have been easier to do maintenance on. From my experience it's the newer stuff that is built where it's not easy to take apart and when you do, your only option is a $300 board or you gotta buy a new unit.
@jonathanroy7582
@jonathanroy7582 3 года назад
Thanks, coupler problem for me.
@jeffostroff
@jeffostroff 3 года назад
Glad to help
@noahdelatte7378
@noahdelatte7378 3 года назад
At approx 7:38 I notice you test the transmission by spinning it counter clockwise (to the left). Should it be able to spin both ways?
@jeffostroff
@jeffostroff 3 года назад
Yes, look at 7:56. The motor should be free to spin both directions, it is induced spinning when current passes through the windings.
@raymondwaterman6520
@raymondwaterman6520 7 месяцев назад
Also check pressure switch tube for debris, fit and wear.
@kellyknarr2935
@kellyknarr2935 2 года назад
I changed the dogs but I couldn't get the wide base of agertator off and won't spin out all the water
@dylano7242
@dylano7242 4 месяца назад
Uh you forgot a mjor part that breaks. there is a plastic gear in the tub that connects the agitator . That if strips out, it won't spin or agitate. It's easy figure out if broken, if the agitator spins in both directions it is stripped , it is only meant to spin in one direction.
@COWBOYZNATION
@COWBOYZNATION 3 месяца назад
🤔
@Whospeakestruth
@Whospeakestruth 3 года назад
I have a Whirlpool lsq 9500 doesn't agitate or spin. I noticed the selector dial makes clicking noises when it's supposed to be agitating or spinning any idea?
@jeffostroff
@jeffostroff 3 года назад
no but go to appliance parts pros, enter your model number, and look through their videos of solutions for different parts of the machine
@rickf5452
@rickf5452 3 года назад
he sounds likeCharlie Sheen at times lmao
@jeffostroff
@jeffostroff 3 года назад
I'm.....Winning!
@mjenn6154
@mjenn6154 2 года назад
So what did you actually fix? What was the privy?
@COWBOYZNATION
@COWBOYZNATION 3 месяца назад
Capacitor
@charlesharrell8798
@charlesharrell8798 3 месяца назад
Is it possible that the timer is bad? I have a belt drive Hotpoint top loader washer HSWP1000M4WW. The reason I ask is because my timer sometimes would not turn off with the timer knob. I taped the safety lid switch together so I could open it to see how well it was agitating. Then one day it just stopped washing or spinning even when I turned the timer manually. My timer is advancing through all the cycles, though. Any thoughts?
@jeffostroff
@jeffostroff 3 месяца назад
Yes likely an issue with the dial or the circuit on the main baord
@terencearmstrong3048
@terencearmstrong3048 3 года назад
Jef can you help me with my Bosch washer dryer . The problem was not agitating replaced with new carbon brush S. Switch on it worked went through th washing cycle ok drained the washer ok went into the spin cycle started to Rev up just before going into high speed cuts off and the spin cycle restarts
@jeffostroff
@jeffostroff 3 года назад
Don't know much about Bosch, but I have seen people before offer up that maybe it's not draining completely so can't spin at high speed. Try it with tiny load. search google for "Bosch washing machine won't spin at fast speed"
@williamoneal2763
@williamoneal2763 2 года назад
@@jeffostroff ,,
@nkgaming4508
@nkgaming4508 2 года назад
Hello, my whylpole don’t spin, don’t agitate and don’t drain water. I here something in the motor like is working but if don’t spin, agitate and don’t drain water it could be the coupler? Or the swtich?
@jeffostroff
@jeffostroff 2 года назад
I would examine your door switch first. With your particular model, google the model number and look for other people with similar issues
@thomasanderson3987
@thomasanderson3987 2 года назад
Hey Jeff my machine spins, but won't agitate could that still be the switch?
@jeffostroff
@jeffostroff 2 года назад
I don't know on this one but I would say that is probably not your problem because if the door switch was bad it would not spin at all. That is a safety mechanism to prevent anything from moving when the door is open. So I would have to start hunting down something else may be on the controller board.
@wranefis
@wranefis 2 года назад
Hey there . Here is my issue I hope you could take some of time to help me I would really appreciate it .:. I have a hot point that stop working … I watched several videos and I end up replacing the capacitor and check the pump for any stuck socks :: put everything back together and it still don’t work … the Door switch clicks and makes a sounds when I close the door so it’s working .. the washer gets the water 💧 necessary to start the cycle but it never starts .. not even a sound it doesnt do anything. So idk what could it be . The belt looks good I think , there’s a new capacitor and the pump work too and the door switch works too . So what could it be ?
@jeffostroff
@jeffostroff 2 года назад
Not sure on that one, if it is not the motor, it could be something else on the controller board.
@sandravossen7029
@sandravossen7029 2 года назад
Hi. Mine is doing the same exact thing you describe. Did you ever figure it out?
@joelharper9379
@joelharper9379 3 года назад
why was it not spinning , i must have missed that in the video, it said how to repair if not spinning ? Tear down was good.
@jeffostroff
@jeffostroff 3 года назад
bad door switch. since the machine thought the door was open, it would not turn on the spin cycle
@paulgrice6766
@paulgrice6766 3 года назад
Word of advice if you huy one of $800.00 new washers or dryers by the 3-year extended warranty i did the pump went out on my three-year-old Samsung
@jeffostroff
@jeffostroff 3 года назад
Yes, and check at Costco, because a lot of times they add a year or more onto the appliance. We just bought this week an LG OLED 55CX TV, and Costco already had their 1 extra year plus Costco Concierge service, then during the sale this week they threw in the Square Trade 3 extra years, a $99 value free, so now we have a 5 year warranty.
@Cpt-C4nuK
@Cpt-C4nuK Год назад
What if I see oil around the motor cuplink. I’ve taken the motor off completely but I see oil. I’m thinking at this point instead of having to remove the break it may be cheaper to buy a used one
@jeffostroff
@jeffostroff Год назад
Sometimes there is a bit of grease, they don't usually use oil. It could be from somewhere else
@k.hi.6927
@k.hi.6927 2 года назад
Our whirlpool is spinning without draining. But the spinning sounds different. The clothes seen In there with soapy water. What can I do?
@jeffostroff
@jeffostroff 2 года назад
First thing I would do is pull the washing machine away from the wall and test the drainage into the wall and make sure your pipes are not clogged I doubt that would be the case but this is a very unique failure that you have so anything could happen. If that's not the case then make sure the hose coming out of the washing machine going into the wall is not clogged. And if that is not the case then you probably have a problem with the solenoid inside the washing machine that tells it to pump the water out
@davidcross6340
@davidcross6340 3 года назад
Alot of those older washers you can just bypass the lid switch. Yes it can be dangerous
@jeffostroff
@jeffostroff 3 года назад
Yes, that's a lot safer on the top loader than the front loader, but still would be nervous some idiot sticks their hand in during agitation, or a kid sticks their head in and gets strangled.
@ambernelson2695
@ambernelson2695 3 года назад
How do you bypass the lid switch
@ambernelson2695
@ambernelson2695 3 года назад
My washer filled with water and just stopped and won't agitate. Don't know how to get water out and need time to order lid switch online. My clothes are starting to stink they've been sitting in water for 3 days now. So how can I bypass until order comes in
@brodriguez11000
@brodriguez11000 2 года назад
@@jeffostroff : I think they're saying as a test. Sometimes the failure isn't always as obvious as a burned contact (smell might have hinted at that as well). Some of the newer is a sealed switch activated by a magnet.
@oli4731
@oli4731 Год назад
Hi, great video. I did step by step but it still does not turn it is stuck. What can I do. I thank you I advance
@jeffostroff
@jeffostroff Год назад
You'll have to keep searching for videos on your model to see if it's maybe the controller board, or a relay somewhere. Try Appliance parts pros, enter your model and see what video they have under the symptoms section that show how to fix it
@oli4731
@oli4731 Год назад
@@jeffostroff Thank you so much for your quick response
@Troymatti
@Troymatti Год назад
New motor ,coupler and capaster ,machine won't agitate I even took the motor out but kept the power connector and still the motor only kicks in on spin ,you think its the timer or clutch ?
@jeffostroff
@jeffostroff Год назад
It could also be the controller board not enabling the motor
@sharonkeef
@sharonkeef Год назад
Not spinning clicking noise
@karlkruer1179
@karlkruer1179 3 года назад
Good video but you should have checked the agitator dogs (small plastic teardrop shaped pieces) in the top of the agitator before you took the whole machine apart.
@jeffostroff
@jeffostroff 3 года назад
Did not need to check the dogs, we knew the motor was not running when it should have been, that is an electrical issue typically. If there was a problem with the dogs, at least you would hear the motor running.
@Sir_Gee
@Sir_Gee 2 года назад
Hey, I open my twintub, the spinner won't start on its own, it needs a boost and checked my capacitor that is in good condition.
@jeffostroff
@jeffostroff 2 года назад
Hopefully the motor is not going.
@Sir_Gee
@Sir_Gee 2 года назад
@@jeffostroff yeah, but what could be wrong? The spin motor just buzzes and it won't spin.
@mrsmith5114
@mrsmith5114 Год назад
Sadly still can't fix my issue :( Replaced capacitor, lid switch, the dial and the motor. Thing will still not turn on =/
@jeffostroff
@jeffostroff Год назад
This leans towards a bad controller board
@carriegrandy9387
@carriegrandy9387 3 года назад
where is the filter pump on a kenmore heavy duty top loader washing machine
@jeffostroff
@jeffostroff 3 года назад
Sorry don't know never opened one up, but go to appliancepartspros and enter your model number, they will have the drawings there for your unit
@larryrivers2752
@larryrivers2752 3 года назад
So it was the lid switch?
@jeffostroff
@jeffostroff 3 года назад
Yes, in this one, you could see all the scorch marks, and it wasn't clicking anymore.
@hooked_fish
@hooked_fish 2 года назад
Hi bro what is the number of the part thanks
@jeffostroff
@jeffostroff 2 года назад
🛒 Whirlpool 8318084 Lid Switch for Washer: amzn.to/3fZZVIy
@hooked_fish
@hooked_fish 2 года назад
@@jeffostroff thanks so much appreciate
@dmichellefriday6300
@dmichellefriday6300 3 года назад
Didn't ck the hose that goes to motor I've seen on other videos...sm.clothing clogging!?
@jeffostroff
@jeffostroff 3 года назад
Machine working fine after this
@dmichellefriday6300
@dmichellefriday6300 3 года назад
@@jeffostroff oh my bad...didn't think of that,Ive watched 20 videos! Mine won't spin clothes out...started with agitator the dogs (1 ref.to) is worn & piece that comes out before you get there washer is broke & everyone is saying it's the belt!? Hope not...😱😘
@ambernelson2695
@ambernelson2695 3 года назад
How do you get the water out
@jeffostroff
@jeffostroff 3 года назад
You can use a wet vac
@COWBOYZNATION
@COWBOYZNATION 3 месяца назад
Cup, a bucket, and lots of walking...
@ryanmacewen511
@ryanmacewen511 3 года назад
Inside, where the hot water, and hot air warm the room?
@jeffostroff
@jeffostroff 3 года назад
This is in the garage. Also hot water heaters don't warm the area around them, they are too well insulated. That's why they are room temperature when you touch the tank.
@ryanmacewen511
@ryanmacewen511 3 года назад
@@jeffostroff OK, lets point the FLIR at the tank, and then at the wall. Point it at the hot water pipes, and then the wall. Point it at the dryer, and it's vents, and then at the wall. I'm sure you will see that they do give off heat. Saving a few bucks on E, doesn't make for a bad builder, or bad choice.
@jeffostroff
@jeffostroff 3 года назад
@@ryanmacewen511 Well you don't live in Florida, so you don't know. I have 2 friends with drastically bad problems now because the idiot builder put their Ac units in the garage rather inside in a conditioned space of a closet like normal respected builders do. Now they have AC units that are sweating profusely in the high heat and humidity of the garage, and at one friend's house, because of the way they built the AC area, it all that excessive sweating leaked water through the wall into the house into their dining room and destroyed the wood floor. Twice.
@ryanmacewen511
@ryanmacewen511 3 года назад
jeffostroff I think the physics are the same everywhere. I wouldn’t put a central AC unit inside a garage. I thought you were referring to washing machines in a garage being a bad idea. Humid air from these machines is also another good reason to place them outside conditioned space. Depends on the scope and budget. On the low side it’s a good idea.
@schnurstein
@schnurstein 2 года назад
My machine fills but won't drain. Does not agitate, does not spin. Makes a loud noise when on the agitate cycle, "bang-bang-bang" like a machine gun. Coupler replaced, issue persists. What next?
@jeffostroff
@jeffostroff 2 года назад
If all those things are wrong I would look at the main controller
@schnurstein
@schnurstein 2 года назад
@@jeffostroff Main controller? You mean an electrical part? Or the motor? I"m in the process of replacing the trans.
@carlthornton3076
@carlthornton3076 Год назад
Very Good!... #131 ✝ {11-9-2022}
@harcasvictor8310
@harcasvictor8310 3 года назад
Bro my machine only agitating but not spin when washing
@jubankta1627
@jubankta1627 2 года назад
Bro you said,”So when I move it back with my thumb”,Then use your pointer finger/index finger whatever it’s called,HaHa!!Jk,But anyways Thanks for the video was very informative,Ill be fixing my mother’s washer today with this shared knowledge,If it’s the knuckle between the motor and transmission I’ll probably have buy a new one because this would be the second time in two yrs I’d have to replace it,So something else must be making this part fail andthe ynitvis older than dirt
@jeffostroff
@jeffostroff 2 года назад
Man I can't keep track of my fingers! Working in that 100 degree garage was killing me that night
@thetransitofvenus8927
@thetransitofvenus8927 3 года назад
#Spingate
@jeffostroff
@jeffostroff 3 года назад
There's a good hash tag
@DADoESofTX
@DADoESofTX 2 года назад
Do *not* detach the clip(s) at 2:10. The hooks at the base of control console detach from the machine top by pulling the console slightly foward. Then the entire console rotates upward and back (as shown) when the two screws are removed. The clips anchor the hinge pieces to the back panel that allow the console to rotate upwards and should not be "pushed in."
@konamanstudio2447
@konamanstudio2447 3 года назад
🍻🍺
@jeffostroff
@jeffostroff 3 года назад
Great to see you on the premiere tonight again Konaman!
@MrXavierruiz22
@MrXavierruiz22 2 года назад
Theres absolutely no need to take the "shell" off to replace the coupler
@jeffostroff
@jeffostroff 2 года назад
yes there is, how else would you get to it?
@MrXavierruiz22
@MrXavierruiz22 2 года назад
@@jeffostroff lean the unit back and work from underneath
@MrXavierruiz22
@MrXavierruiz22 2 года назад
Saves time and effort, you always want to move the unit the least amount as possible in a customers home( granted it’s your friends unit) you feel the coupler with your hand and tell if it’s engaging before taking off the motor and shell and if it need to be changed out 15 min repair without moving the unit and taking off the outer shell
@kevinbrown2684
@kevinbrown2684 5 месяцев назад
Am i crazy or did he just disassemble and reassemble but didn't "fix" anything???
@jeffostroff
@jeffostroff 5 месяцев назад
You are crazy. I disassembled, installed a new switch and reassembled
@Alcheer
@Alcheer Год назад
LOL, that's too much work for me. Computers are easier to fix.
@jeffostroff
@jeffostroff Год назад
This one was quite a bit of work, but saves $400 repair bill
@tamirugemechu5160
@tamirugemechu5160 2 года назад
@jeffostroff
@jeffostroff 2 года назад
Thanks, I'm glad you liked it!
Далее
Washing Machine Agitator Repair (All Models)
7:38
Просмотров 1,7 млн
GE Washer Will Not Spin Or Lock / Model GTW460ASJ6WW
12:29
Washer not spinning, only agitates FIX
3:40
Просмотров 214 тыс.
Washer Not Spinning - How to Reset Motor (Easy)
3:47
Pulling Hinges with A Halligan
0:26
Просмотров 24 млн
это самое вкусное блюдо
0:12
Просмотров 2,8 млн