Get Noticed With Customizable Woodworking Designs!

Sothpaw Designs | Become A Better Woodworker

Подписаться 27 тыс.

Просмотров 3,7 тыс.

50% 1

Ready for another WOODWORKING PROJECT THAT SELLS? This is a perfect project for beginners, and requires no special tools! Today, you'll learn THREE techniques to make this Taco Tray from basic to advanced. All three versions can be made in less than an hour, but each one incorporates different woodworking tools and techniques depending on your skill level and tools available!
CNC Design Files - www.sothpawdesigns.com/store/...
See more CNC Projects here - • This Is My MOST PROFIT...
See more custom woodworking projects here - • Woodworking Projects T...
Tools and Equipment Used In My Workshop
DeWalt 13 Inch Thickness Planer (DW735) - amzn.to/42Pw651
DeWalt 8 1/4 Inch Table Saw - amzn.to/3RWFyS2
DeWalt Miter Saw - amzn.to/3XtETav
PWN CNC Spindle - pwncnc.com/?ref=pdzjMWczHYaL6G (Use the discount code SOTHPAW to save 5%)
Wen Oscillating and Spindle Sander - amzn.to/48XG8EY
xTool D1 Pro - www.xtool.com/products/portab...
Chapters
00:00 What Are We Making?
00:43 Basic Version
03:50 Intermediate Version
05:44 CNC Version
08:35 Cost and Pricing

Хобби

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@justinbanks2380 2 месяца назад

A trick/tip I saw on a Diresta video when cutting dowels on a band saw, spin the dowel while cutting and you don't get the blow out/fuzzies if you just push it through Dude is a master of the band saw. You alwaysearn something just watching how he does things, he rarely calls out the things he does

@paulsmessyworkshop 5 месяцев назад

Great projects. Here is a hint….don’t use a downcut bit for making holes…it forces all the chips down into the hole. Use an upcut bit.

@SothpawDesigns 4 месяца назад

You're 100% right. I didn't think about that till after I'd posted.

@justinbanks2380 2 месяца назад

6:21 they will snoke like that too if you try to use a quarter inch endmill to plunge cut a quarter inch hole. Ideally you want to make a circle with the bit the size you're wanting. Gives the chips some room to clear

@af2001 5 месяцев назад

Good afternoon

@jimrosson6702 4 месяца назад

What a great idea thanks for sharing

@SothpawDesigns 4 месяца назад

Thanks for watching

@scottbionicnerf8727 5 месяцев назад

Great Video Brother. Thanks for the great ideas.

@SothpawDesigns 5 месяцев назад

Thanks!!

@WindRidgeWoodCrafts 5 месяцев назад

Love these little multi-way projects, Damien. For that CNC bit, go with an upcut whenever you’re drilling, otherwise you’re compacting the chips into the hole. We’re finally warming up enough around here for me to get back out to the shop and stop living vicariously (aka shouting from the bleachers) through you.

@SothpawDesigns 5 месяцев назад

Thank you. The first time I noticed that happening was with another drilling project, so that makes perfect sense, I wish I would have thought about that. Appreciate that!

@WindRidgeWoodCrafts 5 месяцев назад

@@SothpawDesigns And if you get into a project like a cribbage board, drop by IDC Woodcraft and check out their CNC drill bits. I just did some cribbage boards with their 1/8” drill bit at about 1 second per hole for 1,000 holes, no pecking. It’ll put a grin on your face.

@CrossCutCreations 5 месяцев назад

This is an awesome project. Thanks for sharing, Damien!

@SothpawDesigns 4 месяца назад

My pleasure!

@ronnorris1504 4 месяца назад

Really nice projects. What type of food safe products do you prefer? Thanks!

@SothpawDesigns 4 месяца назад

I used maple, with shellac to seal

@storedaway 4 месяца назад

Did you add a finish to these? If so what type?

@SothpawDesigns 4 месяца назад

I recommend using shellac, which is food safe

@teroauranen4953 4 месяца назад

Can I ask, what is the CNC machine you're using?

@SothpawDesigns 4 месяца назад

I use a Onefinity Woodworker x50. Upgrading the the Elite, but it's not arrived yet. If have a couple of nonsponsored reviews on my channel if you're in the market. I'm not paid by Onefinity for anything.

@MysticSpank 4 месяца назад

i dont understand the use for the dowel rods.

@SothpawDesigns 4 месяца назад

Sit your taco shells into the dowels so they sit upright while you're building your taco.

@bclamore 5 месяцев назад

$5 for 1bf of Maple? Is that rough cut?

@SothpawDesigns 5 месяцев назад

Yes. It sells for $4 in my area.

@janesserearden7770 5 месяцев назад

Do you put anything on it to make it food safe? Love it. Thanks

@SothpawDesigns 4 месяца назад

@@janesserearden7770 Yes, I should have included that. I use Shellac for this type of project.

@bustdamatrix8189 4 месяца назад

I am being forced out of retirement from this shit economy. I have tons of manufacturing experience with industrial lasers none with this type of CNC's Would you mind sharing how you get your sales and a rough guess of sales figures?

@SothpawDesigns 4 месяца назад

I'm not a full timer. I'm a high school teacher who is building a business that I'll transition into full time when I retire from teaching in a few years, so my sales figures aren't representative of someone who's a full timer. Regarding sales, many are local word of mouth, Facebook, my website, and a few from sites like Etsy. I've built a name in my local area by just sharing my work out there. I try to make it unique and creative, so people want to show it off, which leads to quite a bit of word of mouth. In my experience, Etsy doesn't really bring in much, but you're only one of potentially millions of online stores on their network. But that said, I don't invest much time in Etsy.

@bustdamatrix8189 4 месяца назад

Well good luck just don't transition to early. @@SothpawDesigns