Get your Troy-Bilt Power Washer Running again! (Unusual problem....)

Подписаться 44 тыс.

Просмотров 41 тыс.

50% 1

Many pressure washers sit so long between uses...the old gas can clog the carburetor, and I fully expected that to be a problem here. (See part 2 for how to remove, clean, and re-install the carburetor). But today's problem was one I did NOT expect....Please see what I discovered, and let me know your thoughts on how it might have happened. Thanks. Buckwsr, putting the "Do" into "Do-It-Yourself."

Опубликовано:

17 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 29

@MikeWoot-ox9xf 3 месяца назад

Appreciate ya Buck. I’m gonna put some Dew in mine tomorrow and Dew’dat myself. Wish me Buck Luck! 🍀

@MikeWoot-ox9xf 3 месяца назад

_”I know what’s wrong wit’it”_ _”aint got No gas in’it”_ 😂

@MemphisMojo15s 2 года назад

My carb jets were clogged. After cleaning them it ran great for a little while. 1 week later I try using it again and now it won't stay idling. There are supposedly 2 springs and I don't understand where the other one goes. Mine would also die just as yours did once you pulled the wand for water.

@Bass.Player Год назад

I just bought this exact same machine that would not run. I had to replace the carb, it was in bad shape inside so now it runs like a new one. I put a shut off valve in the fuel line so I could run the fuel out of it before storage. I changed the oil also, NO DRAIN PLUG on these, I had to turn it on it's side and let it run out the dipstick...!

@Buckwsr Год назад

Great comment, thanks. I use a Harbor Freight hand pump to pump the old oil out of the dipstick tube. Apparently, Briggs doesn't expect these engines to last long enough to actually need an oil change....

@Phoun615 Год назад

What carb did u get I can't find one for this model

@dalee.mccombs8571 Год назад

The unloader valve on the pump?

@alfredomarin3793 Год назад

Has anyone had any issues with high idle ? First start this summer I noticed it runs at a fast idle all the time and never goes down. Worked only for first year and never idle down again ?

@coloradodayhiker 11 месяцев назад

Purchased one of these four years ago from Lowes and I have to say it was a total waste of money because of that idle down crap. Grrr, California and their emissions standards really suck!

@unxplainedlogic4597 2 года назад

Thx for showing me how to. I got dtufked looking at your long nails lol. Seriously thank you

@Buckwsr 2 года назад

Guitar player...long nails...hope you got your machine running!

@brian644 Год назад

next time spray the starting fluid on the air cleaner and put back on ... the power washer will fire up better

@marshallborder9089 3 года назад

I've run across this closed gap in a spark plug once and I fiqured maybe somebody else cleaned and dropped it , was the only thought I'd have on this .

@Buckwsr 3 года назад

What else could it be? Incorrect sparkplug, like too long, that collides with the top of the piston? Debris in the combustion chamber? I really have no idea....

@marshallborder9089 3 года назад

When things like this happens really makes one think of a lot of stupid different things 🤔

@jerrymulholland5752 Год назад

Link for part 2? Trouble finding it.

@Buckwsr Год назад

This video might help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-f16tSPPrvEU.html

@jerrymulholland5752 Год назад

@@Buckwsr thanks, trying to figure out linkage. starts fine, pumps fine, auto idle funtions , but is disconnected at carb. doesn't want to rev, maybe gov issue? i think springs are kinda butchered (not by me). my carb is a little older i think. thanks

@douga4953 3 месяца назад

Mine won’t come out of idle down. I pull trigger and it dies . Surges at idle Mouse chewed armature replaced that. Cleaned and gapped plug used Seafoam spray. Then pulled carb and sprayed out with throttle bottle cleaner I need to know the mechanism that actuates the full throttle when you pull the trigger