Why your Pressure Washer won't start...and how to fix it! 

Yesterday my new neighbor asked to borrow my pressure washer because his wouldn't start, then mine didn't start... I watched your video, both had clogged up carbs. Now both are working. So this is a two for one! Thank you. Subbed. 👍

Thank you so much. I’ve always been to nervous to try and work on engines because I dont know what I’m doing, but with your help you saved another small engine. Cleaned the carb on my pressure washer and it running like new again and my wife thinks I’m a stud again. Thanks again👍

Buck - Thanks a million for your video!!! I followed your steps to clean the carburator and it started on the first pull. Appreciate you taking the time to show everyone how to fix the problem. You saved me a bunch of time and money bringing my power washer to a small engine repair shop!

Thank you! This video walked me through the same problem. I’ve never taken apart a carb and your video helped me. Now it runs. Great video!

Hey Buck. I offer sincere thanks and appreciation. You indeed saved yet another small engine today. I watched your video. I then proceeded to take off and clean the carburetor on my pressure washer, which I hadn't used in two years. I cleaned it out, reassembled it, and it started like a champ. It was the first time I've worked on a carburetor. So kudos to you, sir. You're making a difference in the world. Thank you.

Great video! My arm and I nearly gave up on my Craftsman Power Washer, I followed your steps and now it starts every time!!!! It was a great idea to take photos as it helped greatly with the reassembly. Thanks!!!!!!!

I just wanted to say thank you as well! This video saved me a lot of headache and hassle when trying to start my troy built pressure washer after it had been sitting for a while. I followed every suggestion, and it worked liked a charm! Thanks again!! 😊

Video was a big help to getting my Craftsman pressure washer up and running after several months of storage-almost exact same build to carburetor. Did not have carb cleaner but was completely successful just using small pipe cleaning brushes. Thanks for the detailed directions and help!

Your video was a life saver! You were great on explaining the step by step of what to do. I knew I had to clean it but all thanks to you I now know how to take it apart and my power washer is good as new! Thank you

Hi. Thanks for the great video. My washer was a bit different, actually had a metal carb! But your demo was very helpful even though my carb was a little different. Got it up and running in about an hour. Thanks again!!

This was massively helpful! Thank you for showing the details on the carborator. I have a different model but it was still greatly helpful to understand some of the inner workings.

I have a Craftsman power washer that has the same plastic carburetor. I've taken it apart, watched your video 3 times, getting ready to put it back together to see if it will start. Already took the top off and cleaned the flywheel and magneto and verified there was spark. The last thing I checked should have been the first. Thanks for the informative video!

I did this same thing to my lawn mower, thanks for helping ppl out.... Love that saying "Only you can put the DO IN DO IT YOURSELF"

I am thankful for giving me hope and encouragement to tackle similar problem on my Homelite unit.

Thanks so much. You saved us from spending unnecessary money. Excellent video!

I first looked online for a new pressure washer. I saw the prices. WOW. So I went and found this video. I followed your instructions. It fired right up. Thank you.

Thank you my first time working on a plastic carburetor, your video walked me right through it and I got it running I cheated and leaned the washer back and got the bowl off without taking the carburetor off again thank you.

Thanks for the video! Managed to fix my jet wash today thanks to your video! Appreciate it! - Birmingham, UK.

Got grease on my hands and couldn’t skip ads hahaha I see your game. Amazing video, I’ve never worked on anything like a carburetor but your introductions are so clear I was able to work on a totally different brand. Thanks a ton!

Thanks , I’ll try this as I was 15 minutes away from buying a new one .

Always appreciative of getting the help from someone who knows. Thanks.

Thank you so much! I was about to give up and buy a new power washer until I saw your video. After about 10 minutes of work cleaning the carburator it started right up.

I feel like I can’t add too much more than what other people have commented except to say ‘thank you!!!’ I’m soooo not a handy man but your instructions were so helpful I was able to get my power washer up n running again!!

Very helpful! I can’t wait to get started taking mine apart to fix. Thanks again!

Thank you buddy. I will try to clean up my pressure washer carburetor as you showed me in the video

Great video. You are very detail about the repair. Congratulations.

Another "Thank You!" for the video and the very clear instructions. Briggs and Stratton power washer wouldn't start, went through electrical, changed spark plug, cleaned ignition system...no start. Went through fuel system, cleaned (almost everything)....no start. Argggg. Found your video, went back out to the shop and took carb apart again, cleaned the middle plastic jet assembly like you did and Voila!! Started first pull. Thanks!!

Thanks Buck, your video helped me tremendously!

Great video and got my power washer up and running!!

Long time RU-vid user, first time commenter. Thanks for the help here! I’m an electrical engineer and I was able to take this apart and put it back together, started right up after I let it sit a while. Didn’t even need a multi-meter or oscope. Feeling like a proper engineer.

Thank you. I did it without removing the carb just the bowl and the jet. I tried it clean it before with no luck because I didn't realize it came apart. Started up like a dream right after. Again, thank you! Earned a sub.

Worked like a charm! Thanks for posting.

Your advice was perfect! It worked great for me! Thank you, sir!

Awesome video. My pressure washer has the exact same engine/carburetor and I was able to get it running after watching your video. Thanks!

Much appreciated. Exact fittings for my Craftsman 3000 psi started right up once I put everything together.

Thank you so much for this video it looks very helpful. At least now I know that I am not the only one struggling with this problem on the same engine that is fairly new.

Wow, thanks so much! I was all set up to do my projects, then, nope, won't start (2 years old, last used 6 months ago with old gas) after the winter. I was so depressed. But after I drained the carb,, added fresh gas, and poof ... it started! I really did not want to attempt the carb clean, so... great. Thanks so much!

Thank you! your video was very informative and well done. I was able to fix the carb issue with my power washer.

Good job. I’m having the same issue. I’m going to follow your steps.

Thanks for your help! I was getting ready to take my PW to the repair shop. Grateful I came across your video first as this was exactly my problem.

Another power washer fixed! Thank you buck!

Thank u for helping me get my pressure washer started!

Dude… I watched this and then fixed my friend’s Powerwashing machine which was the same type. Thanks!!!

Worked like a charm! Thanks for the info!

Thank you for posting my good man! Cheers

I need those plastic carbs are years and I never knew that jets come apart after you pull the middle! Thanks!

No plastic on mine. I have a ryobi with a honda engine. It was an actual metal carb lol. It did not have much to unscrew then i noticed an area to unscrew the bottom jet which was behind the bowl drain screw. Once I took that out a brass tube fell out with the holes that needed cleaning. Pay attention to the direction that goes back in first. Did not have that fancy wire that you had, but used some very small stripped speaker wire and tunneled through the holes. Sprayed with the carb cleaner, put and all back and bam... I was ready to bring to a small engine mechanic, but this saved me time and money. Thanks Buckwsr.

Woohoo, you helped me get mine started, only had to spray some carb cleaner under the filter after I checked to make sure gas was flowing and voile! it started right up. Many thanks!

Man, thank you! judging by the comments, to half of the folks you are the dad that many never had or the other half that never paid attention to what their dad tried teaching. Either way. Very helpful

For a belated Father’s Day, I was helping my dad with yard work. We hit an obstacle when the pressure washer wouldn’t get going. Not only did this video help us fix that problem, it also gave me a memorable and awesome moment with my dad. Thank you.

I never worked on a carburetor before and your video really helped. thanks!

Thanks so much! Might start unhooking Gass line and draining carburetor over winter.

Great video, Thank you. I had to do the same with my lawnmower last week, tomorrow it will be my pressure washer.

wowwwwww thank God for finding this video since I have a pressure machine and I haven't been able to turn it on for 3 years and you just made my day since I followed your instructions

I bought this exact pressure washer from fb marketplace. Cleaned the carb because of the surging. Bought a new carb because cleaning it didn’t stop the surging. Didn’t realize it’s made to surge like that. What a waste of time lol. Thanks for the video.

Buck, you ARE actually saving the earth. All of these people would have thrown their machines out, and bought new ones. You kept them out of the landfill. Good job everyone!

gonna give youre tips a shot tomorrow on a used one i bought, almost got it started

Today is Saturday the 22nd of July, thank you very much for show me the little fuel nozzle in the carburetor you saved me about $200 getting it fixed. Thanks a bunch Dave in Baltimore

Awesome video ,worked great, the blister between my fingers, is laughing it's butt off though

Thanks Buck . RU-vid saved me again. I think I'm going to add a gas shut off to mine. It had only been 4 months and it did this even with fuel additive. Really cheap carbs.

Thanks Brother. My washer is a craftsman, but most eveverything was the same(Briggs and straton engine) would not start this spring. Followed your video and it cranked first pull after i got it back together. Ive recently become a big fan of sta-bil fuel treatment to prevent this problem. THank you!!

OK. I have exactly zero engine experience, but this video was good enough so I fixed my own issue with my pressure washer with no problems. Thank you! Guess I don't have to use that extended warranty after all! ;)

I just fixed mine watching your videos. You are a hero!

Thanks brother!!!! I have absolutely zero engine knowledge...like maybe less than zero. I watched this and did pretty much everything you said. The only difference for me is on my Craftsman, its easier to refit the back linkage, then the spring, and then the front linkage. Thanks a bunch for this video! It's purring like a kitten now.

Thanks Buck! Worked perfectly on my Husqvarna PW 3100. One port was badly gummed up. Started on the first pull after cleaning. I was concerned when removing and separating the jets. I used pliers and took my time. Listening to the squeaking in the video was helpful

This was perfect - exactly what i needed to fix our pressure washer - thanks!

Thanks for the great video, newbie here, learning.

Great video. Draining the carb got me going. Thanks

I just recently got a pressure washer from a friend of mine, and it's been sitting for a year or so. It wouldn't start at all, i kept pulling the cord and it snapped on me twice. After moments of thinking about giving up, I decided to see what else could cause this. Thanks to this video I may have found the issue. Thanks alot!

Best video ever. Thank you!

I was completely frustrated and really upset that I couldn't get my pressure washer to work for nothing I tried everything I tried spraying it with carburetor cleaner and I tried priming it as much as possible and I even tried putting new gasoline in it and that still didn't work my friends came over to try to help me and they didn't know what was wrong with it somebody even said it might be an electrical issue or the spark plug so I cleaned the spark plug and I looked at the electrical and everything looked good and then I found your video and I did exactly what you said to do in the exact same way and I even took pictures so I wouldn't mess nothing up like you suggested and after all that I put it all back together and it worked after four pulls just like you said it would thank you so much I'm so grateful for your video and I will always turn to you if I need some small engine advice thank you so much you have made my day and you have made some kids very happy too.

From one Buck to another, thank you.

Thank you !!! Just watch this video after trying to start my pressure washer for over an hour I drain some nasty stuff out of the carburetor and it started right up just from those drain bolts

i have a briggs and stratton 850 3200 psi paid $ 450.00 use it two times about and hr total have not use it in a year did not start did what you said it works great thank you guy joe barone here in milford pa .

Thank you, very nice demonstration

Worked like charm. Thanks!

Thanks sooo much I was able to fix my pressure washer as well I appreciate the great content I just saved my self 150 bucks ! 🤣

Did this today! Had no confidence in myself or a positive result. Fired right up after.

Hey it worked!!! Thanks

Thank you I will try this out. I have this problem.

Thanks Buck!

Thank you so much

Thank you Mr buck. For giving me back my manhood!👍

Thank you for the video this worked for me 🙌🏾

worked! thanks!

Thank you,., I am experiencing the same thing.., worked fine a summer or 2 ago,, it sat and now it wont start.. Just ordered some carb cleaner gonna tackle it this weekend...

Thanks for the video. I took my carburator apart and cleaned every little hole I found. The big issue I had was sand some how fell into the gas tank. I think the wind may have blown it in while I filled up the tank. Running beautiful now after draining the gas and cleaning the tank. Hey can you do a video on how the Carburator springs should be hooked up. I find that some times the vibration losen the springs and want to make sure they are going in the right place. Thanks again.

You can prevent the winter storage gum up. Run it dry and introduce ATF into the carb by whatever method works best. Next time, put gas in the tank. It may run rough until the ATF burns off, but it works.

Thank you for sharing. I got to use one but its smoked made loud sound when I was using today. Anybody know why? I will like to fix it but not sure where to start. Thank you!

I just saw your video. Because i have that problem. But my work fine after 2 years aifter last time use it. When i stop it. And start jt again. It will not turn on again. But thank i will try this and let you know. Have a nice day.

It helped a lot, but I'm not confident enough to try and take it apart, although I did clean out a carburetor on my lawn mower.

Great info and job thanks for doing that very helpful

Thanks for making a great video!

Brilliant! Thanks so much!

Thanks man this video helped!

Great detail - thanks!

Good job 👍👍👍

❤ thank you thank you very much 😊

It`s a great tutorial! Can you advise, please? Our model equipped with a low oil level switch for the engine protection. It was working perfect last time, but now it can`t start. I checked spark plug- no sparks. The plug itself is good. My guessing is a problem with this oil level switch. Is there any method to localize the real fault, please? Thank you

Thank you for posting this video. You nailed it for me. Luckily, I have the exact same carburetor on my machine so followed your video and it worked like a charm. I had never repaired an engine before so feeling pretty "handy" today. Thanks Again.