Really like your tutorials #1 and #2. You explain very well and move at a nice pace. I do have a question if you, or anyone out there, can help. I have taken an existing Eagle design and added some components and signals to the schematic. When I go to the PCB file, which is always opened with the schematic for back annotation, the parts have been placed, but there are now air wires shown from those parts. How can I fix this?
Hi, You have say (at 28:28 in video timeline) : press the keyboard to create via automatically (jump from top layer to bottom). Please which key on keyboard you have press ?
That´s all good and Great with Fusion, but I was interested in just modifying an existing board layout directly in EAGLE. I don´t have Fusion 360 installed or know how to use it.
I followed your video up until about halfway then it seem to deviate from my display: 1. my 3D model of the 2pin header was the wrong orinetation compared with yours. Mine was laying flat whilst your was vertical. 2. I found that I had to install Fusion 360 and discovered that it is a trial version. 3. What, exactly did you do at 45:27 to get the 3D version of the PCB assembly? You started Fusion 360 but you were too fast to see what you selected.
i am facing a problem , after the schematic i am going for switch to board option i am missing some components there , only few components are available for board preparation rest components are missing. can u help me in solving this problem, how can i get out of this situation. i installed the software 3 or 4 times are then reinstalling it, this time i am repeating the same thing.