Getting this $1000 Foxbody to Run & Do a Burnout After Sitting for 10 Years! 

You did more in 2 hours, than 98% of these other Foxbody “influencers” have in their lifetimes. Good job. Video had me hooked till the end.

Poor Fox.😢 That's probably the most love that car has seen in 20+ years. Sounds good to.

I say this a lot…”There’s nothing like the sound of a Foxbody.”

She definitely chops

Well done Chris you got more then your money worth awesome

HELL YEAH!!! OFF THE TRAILER BURNOUT 💪💪💪💪💪😎🤘 FUNNY THING IS I WAS HOPING YOU WHERE GONNA 😅🤣🤣✊️

This is nostalgic for me for 2 reasons. 1 i have a fox 5.0 drive train in my 93 ranger and i love that thing. Never got to own a fox yet though. And 2 today i just drove my 74 charger around the block for the first time in 6 years! Been working on that for the last 2 weeks. I hadn't started since before my dad died 3 years ago

I'm gonna say a B cam. They've always sounded really good to me! Awesome video, as usual!

Healthy 😂 , nothing beats 302 with flowmaster , amazing job bro hats off 🎉

I like this early access content! After seeing it run, I almost want to see the car restored in some fashion now. Its not ready to give up the fight yet. Though there are some good parts that could use a new home...

It was like a 2 for 1 special tonight with the videos lol Well done getting her going and you didn't disappoint with the burnout! I was waiting for it lol

Looks like that's not your First Rodeo Chris. I figured with that Great Wheel Collection you have, you just have a Buddy who comes over & Does all your wrenchin'. LOL In All Seriousness & having to Play around with all that Camera Work-- One OF The Best How To Videos I've Seen in a While. Great work as Always showing Us What Can Be found & repaired with a little Persistence. THANK YOU

I’m gonna guess B cam. This looks like it’s gonna be a neat little project

Please take that Cobra emblem off ASAP! I'm hoping you'll pop it off during this video. 😂

Hard to kill a 302, awesome job and great video.

SUCCESS!! There was never a doubt that you could get it running! Sounds good! My guess is E Cam.

nice I'll be fixing up mine as well. Mine runs and drives but I'm working on the floorboards now.

I thought if a fuel injected car sat for more than 2 weeks they were a write off 🤣 These cars never cease to amaze me. Carb life 🤘

Amazing how you got that car running! 🦊

Damn that thing sounds good

It's most likely the almighty b cam with all the Ford motorsports stuff on it

Choppy Chop Chop !! Cobra intake check. 5 lug spindles check. Handful of other goodies check.

Hell yeah bro Totally awesome. 🥳

One way To open the hatch or trunk, you go to the button in glove box un plug wires then get a battery put a wire on hot and ground on door hinge you can take the power wire to the plug for wire going back to switch touch to hot wire and pop its open . That's if your wires in engine have all been unhooked or cut .

After you checked the lights I just kept saying shut the damn lights off your killing the battery LOL. Recently discovered your videos been watching every chance I get.

A double feature, nice job getting it to run and drive, cam sounds awesome, nice finish with the burnout, motor seems to run good, the deal just got really good.

I don't know Chris..A ratrod fox build would be pretty sweet!

Throw on one of your nice sets of wheels and take it to at least one show before you part it. One last hurrah for the old girl 🤟🏽

Something about a mustang and how it sounds just gets my blood pumping. I love that body style.

I was waiting for this! Awesome.

Brother great job You're such a beast when it comes to these foxes I've got one I wish i could get you to fix for me I've been setting for 10 years too i just haven't had the time

Nicely done Chris!

Damn I’m impressed. Great job.

I'm gonna say the cam is a fomoco e303, sounds a little too choppy to be a b303, but that could also be a lazy iac

Sounds just like the e303 cam my dad has in his foxbody.

I was so attached to my phone watching this 🤣🔥

11:20 dude, it’s time to retire the gloves 😂

Dang!!!😊 that was a great find !! Awesome sounding cam. Great video. I was surprised that it idled

very cool! Be careful with those EOM Bullitts... :-)

hey Chris...I only saw one beer...what you went thru is definitely more than a one beer job !

Awesome find, great deal,

Dude, I have no excuse why I can’t get my car running and driving myself. Thanks for sharing this 🤘🏼

Excellent score for sure!!

That thing sounds badass.

Thats a sweet find!

Incredible resurrection! Sounds healthy

Awesome job what u think bcam ?

Great video Infamous

What you did is awesome

B cam? Are you gonna save this? Definitely worth your $1000 bucks. Your content is the best man

Ty IP!

Chris, thank you for posting this! Everything actually.. but this is so helpful! I have a pretty clean hatch that sat for 8 years outside in Ont. And then 10 years inside.. I got her home now and going to get her running again. Question Inwas hoping you could answer.. if the fuel pump still fires/primes when ignition is turned.. should I still drop the tank etc? I parked it almost empty. Thanks again for taking the time to post ! Also for the record.. I would 100% pay a Patron fee or Memeber fee, if it means We could ask questions once a week or something for couple hours.

As a tree trimming fox owner I can say with confidence that the saw wrench in the back of the hatch says a monkey beaver man 🐒+🦫+🧔‍♂️=🌲👷‍♂️was the prior owner of shitbox fox lmao!!!

My fuel pump is on all the time as well and I can't find where it's jumped/bypassed. Even with the relay unplugged it stays on.

Love this type of content. Sounds like maybe an f cam

What do you mean by curve vs not curve on the front end for the spindles?

Is it a real Cobra? Great Podcast btw. I'm already hooked.

Man that sh-tbox sounds good.

Just ran across this channel today. Got the Ford bug in high school which led to 6 fox bodies and a 70 fastback then eventually went back to my Chevy roots. Still have a couple of Ford trucks and a 79 Fairlane so it has the fox body chassis thankfully. Your mentioned a 7 quart oil pan, tell me you didn’t put 7 quarts of oil in it!!!! If you did go ahead and drain 2 quarts back out, the extra depth of the oil pan and the extended sump aren’t for more volume of oil. The added volume/depth is to get the oil away from the rotating assembly so as to reduce windage. At 5,000 and above with a regular pan you’ll only see about a quart or 3/4 of a quart in the pan. The rest of your factory spec volume of oil is draining back or getting whipped around by the crank and rods aerating oil and creating drag against the rotating assembly. HotRod magazine has a video on RU-vid in the engine masters series that goes fairly in depth on the subject. I’m sure you know the channel with David Freiburber and Steve Dulcich. Anyway, great work bringin another one back from its long nap. 👍

Good Times. Now, lets cut it up. LOL

I love this build! Is there a way to sort the videos chronologically?

Heck yea 🤙🏽

That's a e cam for sure with set of 1.6 rockers

Thanks Chris. Where or how do I join your Patron? I don’t see a link in your you tube home page/link page.

She really wants to live!

If thats what a 1k fox looks like man did i get an amazing deal on my 900 buck 86 vert

Not a shit box after all! That car is a great score,I Love that car bruh}:‑)

Well you sure do know your stuff about those fox bodies..

Old school build old school cam maybe b52?

Cool AF 😎

i agree with everyone else and think it has a B cam.

Why isn’t this channel bigger.. I’ve been here a month maybe awesome content always been a foxbody never owned one hopefully someday soon

Dope

Nice💯😎

Is the rear bumper from a Cobra?

Do the 8-cyl and 4-cyl 1993's have the same fuel tank?

I would love for you to come look at my foxbody, in clinton, oklahoma

Fix it up!

I love seeing that Lighting with the fox! SEXY!

I think I saw that car on a facebook foxbody forum

I've got a nice 09 Saab I would trade for a rare project car Fox bodys are my fav let me know if you can help

any racer would put a trick flow stage 2 in there !

Good'ol 5.0

Man I would love to have that shit box

Now that it's alive I'd throw some seafoam into the vacuum line off the brake booster and let her soak for a hour or two and then fire her up and blow her out...my Southern Belle sat in the back of a cemented and well finished pole barn kinda like your shop and I went through everything even though it ran and drove home...I'm very picky...even if someone said it was done I do it anyway for piece of mind and my 89 GT runs 100 times better than it did since I picked it up!

E- cam maybe

I paid 6k for my gt and when i see stuff like this I’m like dang that engine has more done to it then mine😭 and you paid so little for that

B303 CAM??

❤❤❤

And my project still dont idle 😅

I hate to bring it up, but the tailpipes are crooked...

Why not clockwise

E-cam

Sounds really good for as bad as it looks

E303

3200? Christ

$1K wow can barley find a decent roller for $1K all $2.5K+ lmao let alone a complete 5.0 motor. $1.5K+

Junk it

3200, lol.. even 1k was too much.

I guess Ford guys call that a race car. 😅😅😅😂😂😂