Giant Bluetooth Plasma Speaker from Honda Ignition Coils (60,000 volts)⚡

Подписаться 816 тыс.

Просмотров 491 тыс.

50% 1

Ignition coils are exciting, and so is saving money. Go to Truebill.com/PlasmaChannel and get started managing your finances today. #truebill #personalfinance
Now, a 60,000 volt dual ignition coil powersource, which plays bluetooth music, is even better. I built a bluetooth linked ignition coil driver that was more capable than I planned it to be, and documented my journey. Links for circuit components below.
Thank you to Franzoli Electronics for his flyback footage! Channel here: / @franzolielectronics
SOME PARTS OF THE CIRCUIT:
555 timer: amzn.to/3q9amkk
IRFP260N mosfet: amzn.to/3Gb7IQI
10K potentiometers: amzn.to/3f9qA6J
150nF snubber cap: amzn.to/3GcelCx
47nf timing cap for 555: amzn.to/31HI7Qz
1k Ohm resistors: amzn.to/3zF2Hxw
5 volt regulator: amzn.to/3HNtgmW
Bluetooth: amzn.to/3qb9f3V
Support / Follow Plasma Channel on:
Patreon: / plasmachannel
Facebook: / plasmachanne. .
Instagram: Plasma_Channel_Official
=======================
*****MUSIC CREDITS*****
=======================
Title screen music:
Song: Sappheiros - Awake
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link: • Sappheiros - Awake (Vl...
All other music purchased through Epidemic Sounds licensing
I am also a television actor! Follow me on IMDB
My IMDB: www.imdb.com/name/nm6578948/?r...

Наука

Опубликовано:

6 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 834

@PlasmaChannel 2 года назад

Imagine being an electron along on THIS ride. I've included links to most of the major components for this build, in the video description. Also - this location was RF shielded. After manual testing, when all doors were closed, no radio escaped or entered. It made using my cell phone with closed doors, nearly impossible. Do not attempt to create a spark gap radio yourself, as it can cause radio interference.

@dire_prism 2 года назад

Electron be like - where AM I ?

@danielzinner6584 2 года назад

The most crucial part is not listed. Where does one get an honda ignition coil from

@g4m3z24 2 года назад

when are you gonna do earthbending for the element series u did years ago, it's still not finished :

@rafalkowerski 2 года назад

Will you try out thise? You now that water is suprising.. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IGpXA6qhH_Q.html

@azarahwagner2749 2 года назад

Ok this is more of a request than a response but here goes I had some ideas for a generator but found rpm’s are limited by the bearings ( like a bendini circuit with magnets and coils ) I was experimenting with neodymium magnets and thought 💭 why not eliminate the friction of bearings and use magnetic fields to levitate the ends of a shaft that had discs with magnets to fire coils . Would you consider trying it out ? I got as far as a disc at each end with magnets evenly spaced out . My first attempts were too rough of a ride because not enough matching magnets on the outer repelling magnet group causing vibration of the shaft . I did discover if I tilted the magnet on an angle it’s magnetic footprint was elliptical and ran smoother with less bumping . Now of course super conductors came to mind but I was trying it out more on principle. Thank you in advance if you choose to experiment on this idea . Kind of a “ better mousetrap “ but no need for bearings would change a lot . IRL it would extend the life of wind farm generators from catastrophic failure due to bearing failure that is all too common

@integza 2 года назад

I need a BEAMDIC to ignite rockets while playing AC/DC

@iamkian 2 года назад

Hello Mr Tomato 🙂 Happy 2022 to you too ... Maybe this year I make a change of winning a 3D printer from you

@DVSS77 2 года назад

and burn some tomatoes

@aaronthedude8787 2 года назад

Not trying to call you out but you would have to make a rocket for that so maybe make one....... or you cant do that

@basdewank3555 2 года назад

what is your next idea to kill the tomato? did you think to begin with the source?

@zagnut48219 2 года назад

While electrocuting evil tomatoes! Based Integza.

@celgara419 2 года назад

Lol Love the name B.E.A.M.D.I.C. ! I never realized Bluetooth was that easy to integrate into a build. Great Build looks like ima need to build one now :p

@PlasmaChannel 2 года назад

My man! Yeah, BEAMDIC felt like the perfect acronym. The bluetooth addition was way easier than I thought it would be! I'm absolutely doing the same thing for other high voltage builds coming up!

@rogerhargreaves2272 2 года назад

😱 I really appreciate your patience with both the Acrylic & the scrapyard search & locate. Bringing that project into fruition was a huge task to undertake. You did it and even got an A.M. radio broadcast. Ha I thought you were going to Rick roll us. Brilliant project Jay. Absolutely amazing watching that arc. 👍😀 from Wales U.K. 🏴󠁧󠁢󠁷󠁬󠁳󠁿

@PlasmaChannel 2 года назад

Hey Rog, thanks a ton. Yeah, patience was definitely needed on the acrylic. Normally I dont have issues. I've been working with it for years. But...sometimes...those gremlins fight you till the very end. Yes, the arc is beautiful. Really, truly one of the most beautiful things i've ever seen. a solid 2 + inches of purple plasma.

@Electronic4081 2 года назад

This video is incredible! I love the different editing style/comedy! You really knocked this one out of the park! Aaaand now I want to build a B.E.A.M.D.I.C. of my own… Thanks for the incredible content as always, Jay, it was well worth the wait!

@PlasmaChannel 2 года назад

Ah, thanks man. That really means a lot. Feel free to share the video - and spread the sparks! "B.E.A.M.D..I.C™, now at a store near you!"

@LabCoatz_Science 2 года назад

Great video Jay, always love the ignition coil projects! You know...if you crank up the 555 timers into the ultrasonic frequencies to eliminate background noise and feed the circuit 12V, this would actually work wonderfully for a certain music-compatible Tesla coil! Just saying ;)

@metal_modifier 2 года назад

Still can't wait for Jay to do that video on your SSTC. Super pumped!

@PlasmaChannel 2 года назад

Thanks Zach. Yeha, that's why I mentioned flybacks at the end of the video. Ignition coils cannot be ran at that high of frequency. You bet your bottom butthole that i will be stitching a bluetooth board into the upcoming SSTC build

@Sniperboy5551 Год назад

@Plasma Channel But what about the top one?

@Speeder84XL 2 года назад

Nice build! The reason you need quite high frequencies for audio modulation to work is probably not just the switching frequency in it self being audiable, but also the modulation of the arc. The switching frequency must be significantly higher than the audio frequencies, to be able to modulate it into sound (otherwise the frequencies will just interfere with each other and end up mostly as nothing or just unwanted as noise). When using 7-10 kHz switching frequency, only lower midrange and bass frequencies would be possible to play back as audio. But low audio frequencies are very hard to play back with an open arc anyway (unless the arc is really huge) - because the volume of surrounding air that get displaced (in this case by expansion and contraction of the air/plasma inside the arc) get too small compared to the wave length of the audio. The same reason a high frequency speaker can be made very small and still loud, but a subwoofer need to be quite big to even work at all. Still fun project and those ignition coils probably has a lot of other fun uses and applications, that doesn't need very high frequencies to work.

@PlasmaChannel 2 года назад

Thanks so much! Yeah, my favorite build hands down. Love this little circuit. You gave great input on this. Have you built plasma tweeters in the past?

@Speeder84XL 2 года назад

@@PlasmaChannel I havn't built plasma speakers, but is experimenting right now with building a small PWM modulated (class D) amplifier (which I got working - maybe I put up a video later). I guess this works in a similar way - because you also have "sharp" pulses coming from the transformer output, which then get averaged out into smooth waves acoustically by the arc. But, if the modulated frequency is to close to the switching frequency, there is not many pulses that can get averaged out and the 2 frequencies will mostly interfere with each other instead. A good rule of thumb for class D (and probably this as well) seem to be that the switching frequency should be at least 10 times (and the more the better) the highest modulated frequency (200 kHz if you want to play audio up to 20 kHz).

@faghihimohammad 2 года назад

Even your first videos were awesome, now they are getting better every time, that is called real progress ! Good job!

@PlasmaChannel 2 года назад

Dude, thanks so much. That means the world to me!

@mrcrunchies8688 2 года назад

I just arrived here from electro boom talking about your ionic wind video and was surprised to see your channel still producing beautiful videos at this rate and still taking to fans! Keep up the good work dude

@PlasmaChannel 2 года назад

Haha yeah I love my viewers. You guys make it all worthwhile. I’m in the middle of producing an epic video too!

@ryan_layne 2 года назад

Congrats on going full time. I live on the other side of the pond and the sun sure is shining this winter in the PNW! 😜 Keep those videos high quality and consistent! Don’t burn yourself out trying to release too frequently. For me, at least, I get more excited to watch videos from creators who release once every 1-2 weeks compared to those who spam every day. Quality or quantity.

@PlasmaChannel 2 года назад

Thanks! I will try my best to keep the video quality up, and not burn myself out. Gets really hard doing videos at this quality though, when doing a full time job. That's why i'm going full time. Thanks for being here!

@dylan-5287 2 года назад

Always excited to see a new video come out. I love plasma physics!

@PlasmaChannel 2 года назад

I love hearing that you love it, sir.

@NerdlabsSci 2 года назад

Hi Jay! Awesome job! I am actually working on a musical SSTC now and this video was helpful.

@Nono-hk3is 2 года назад

Thank you for such a detailed build video. I love them!

@PlasmaChannel 2 года назад

You're welcome, thanks for watching!

@nisu006 2 года назад

First time i have seen something not shining and most perfect thing on this channel which was that radio. Really perfect he is.

@PlasmaChannel 2 года назад

Hahah, that radio is legit from 1958. It still works. Amazing huh?

@vernonvouga5869 2 года назад

The entire reason why I became an automotive mechanic in the first place was because of the interesting ways Automotive Parts can be used with electrical fun. Honestly, As soon as I heard that you could rebuild an alternator to power a house I was hooked... I stopped being an apprentice Carpenter, and joined the Airforce to become a mechanic

@PlasmaChannel 2 года назад

Thank you for your service Vernon. An Alternator powering a house makes sense, it can produce, what 60 amps at 14 volts?

@vernonvouga5869 2 года назад

@@PlasmaChannel its been a long time since i had to test the amperage on one of those, that sounds about right. 9 times out of 10 I'm only looking at the voltage. You always want that guy running between 13 and 14

@vernonvouga5869 2 года назад

@@PlasmaChannel ive bee through alot. I just know its possible. Has something to do with the diodes

@patrickday4206 Год назад

Without a rectifier it produces ac power then adjust the speed to get 120v or 240v! I used to have a welder that was gas powered using a special wound alternator then it was rectified I think it was a Scott welder I think the manufacturer used to work for nasa ! It gave me great welds not as good as my thousands of dollar military welder compressor with generator!!

@anthonyvolkman2338 2 года назад

Excellent video as usual! I would recommend moving your drain connection of your Fet directly to the primary instead of going through the diode, that diode is having to handle all that current which also (at higher frequencies) could cause issues. Leave the diode where it is but connect your drain directly the primary, that way your snubber is still operational. I would love to know if that helps, maybe make a short follow up video??

@nigel-matthews 2 года назад

Nice, clean build! The Japanese do build some quality car parts for sure. Congrats on being able to quit your day job.

@PlasmaChannel 2 года назад

Nigel! Thanks my friend. That's not a lie. As pro-Ford as I am (I drive a stang), I still have to bow to the performance of Japanese parts.

@Seabass20329 Год назад

6:44 - 6:55 was a seriously impressive mix of musical and editing skills. You "played" the coils in key with the background music, even where you hesitated inbetween knob turns you landed on frequencies that were in the same key, and once you came to rest on the higher octave you blipped the plasma in rhythm. There's no way all of that was accidental, that was great

@petercoutu4726 2 года назад

I would recommend looking for information on how FM transmitters encode the audio signal on the carrier frequency. If you're able to adjust your circuit to operate the arc on a frequency just outside of the human audible range, it might help with the screeching noise.

@GrandadIsAnOldMan 2 года назад

Lovely video, Jay. Excellent production. Great project too. Happy New Year 😊👍

@PlasmaChannel 2 года назад

Grandad! Thank you, and happy new year. I wasnt' kidding, this build was my favorite. I've played with it for hours at this point.

@jackbenner1013 2 года назад

I thought this was a very cool circuit, I may try using a circuit similar to this in my musical SSTC. Keep up the great work!

@NorbertFuto 2 года назад

Yay, great news full time video production finally I can start to binge watch your channel

@iwantmypot Год назад

Reminds me of the plasma speaker on timetec's channel 14 years ago. He raised the spark frequency above audible range so you could only hear the modulated frequency. I think he was using a transformer rather than an ignition coil.

@larrymanning5925 Год назад

Coolest plasma video I've watched yet. That was awesome.

@freekingawwsome 2 года назад

@Plasma Channel you did it ,nice work my friend

@iamkian 2 года назад

Happy 2022 Jay. Lets hope you will keep posting amazing stuff like this. I'm now going to rip the Honda Ignition Coil from my grandma's old Honda :-) Stay classy!

@PlasmaChannel 2 года назад

Hey Kian! Happy new year! Thanks, yeah this build was legit so dope. I loved making it.

@giacomofibonacci1022 Год назад

Great thanks. I worked in electronics for 30 years..and this is fantastic !

@PhilipBlank Год назад

What a great project! Watched all the way through haha

@fleckione-workinprogress4249 2 года назад

What a cool build!

@user-ko3fh5rv4u 2 года назад

THANKYOU I was looking for something like this to use one the plasma candle!

@PlasmaChannel 2 года назад

Definitely a possible thing!

@Yaman-D-Chhaya Год назад

Jay I have 2 words for you and this video, " Simply Awesome " loved the build, great idea love and warm regards from India

@coolnegative 2 года назад

Great seeing a new video Jay! This is freakin' cool. I'm subscribed to several channels that use tesla coils to play music. Totally metal bro! This is awesome.....no never cease to amaze me with the ideas you come up with! Blessings for a healthy and prosperous 2022!

@PlasmaChannel 2 года назад

Thank you a ton for that. Glad you enjoyed it! Most people who watched it seemed to like the idea, but then again, I dont think the video was a huge hit overall.

@grn1 2 года назад

Would you mind listing some of those channels. I only know of ArcAttack and could always use more Tesla Coil music in my life.

@coolnegative 2 года назад

@@grn1 I haven't received notifications in awhile. ArcAttack is one of my favs! I'll run through my subs, because I don't remember the names. May take me a bit........im subbed to something like 600 channels!🤣 I seriously need to do some "prunning" 👍

@grn1 2 года назад

@@coolnegative I know that feeling, some of the channels I'm subbed to have a whole years worth of videos (usually a video a week so 54ish videos per channel) that I haven't watched.

@XWorgosX 2 года назад

i really appreciate the effort and the quality of your videos, hope you dont get burnt out by the youtube algorithm. gl man 💕

@PlasmaChannel 2 года назад

That means a lot man. Thank you so much. Yeah, it is a delicate balance of making the best video possible, and not getting burned out. One video takes me about three consistent weeks of work.

@attadarshimeshram7136 2 года назад

I was expecting an arc speaker since I started watching your channel.Also appreciate the effort for this video!

@PlasmaChannel 2 года назад

It was about time I made an arc speaker, right?! Glad you enjoyed it, feel free to share the video.

@horus2779 7 месяцев назад

That Cover image is great , the blue arcs and the purple Mobius strip looking plasma 😮🤯

@plasmaglowmusic1655 2 года назад

I love this channel so much

@boahneelassmal Год назад

Fun fact: in German radio transmitting is called _funken_ / _Funk_ which comes from the earliest process of wirelessly transmitting information by having the transmitter create the radiowaves through sparks (Funken).

@projjwaldhar 2 года назад

Awesome work Jay! Been watching you regularly for over 3 years now & really delighted to see you come so far! Love your amazing sense of humour too “BEAMDIC” roflmao 🤣

@PlasmaChannel 2 года назад

Thanks a ton!!

@-A-Hybrid-Skunk-Productions- 2 года назад

Congrats on achieving your goal. May you achieve more goals. Have an awesome day. Also a very Kool video. Byes for now. Best of luck on your RU-vid career.

@hackercoolio Год назад

Dude just ran in to your channel! love your energy! Fun watch for sure..

@elijahcase6767 Год назад

hearing a creator is from Seattle is so amazing, ive lived there my whole life and seeing someone this smart doing such cool projects makes me proud to be from there

@timm.2010 2 года назад

Love it! and totally love anything Frequency modulated. Especially if doing something less usual. Ever thought about how to use AM to make the worlds best light dimmer?

@PlasmaChannel 2 года назад

Hey Tim! Glad you enjoyed it. No, not thought about that.

@donnyz2200 11 месяцев назад

I love your videos. Your a genius!!!

@Blubb5000 Год назад

There is one company that builts plasma tweeters, for their high end speaker systems. The company is Acapella. I have a pair of Acapella Campanilla. Those tweeters sound absolutely stunning.

@amaltechie9548 2 года назад

Hi Plasma Channel, big fan of you..Its nice to see you again.

@PlasmaChannel 2 года назад

Thanks Amal!

@supermaster2012 2 года назад

The fact that the FCC hasn't sued this guy 100 times over is the most impressive thing of all. Imagine living close to this guy and trying to use wireless peripherals, good lord.

@PlasmaChannel 2 года назад

Haha, they dont sue me because my transmitted signals are extremely weak, and blocked by the RF shielding i've put up years ago around my room. I installed faraday shielding which covers all my walls, ceiling, and and windows, and my floor is several feet thick of reinforced concrete. I have virtually zero cell phone reception at my place at all times, due to this. In order to play the radio, at the end of this video, I needed to remove the shielding from my windows. Otherwise I can't receive stable radio stations through my walls. You'll notice reception was terrible on the radio, as most the room was still mostly covered.

@rickhobson3211 2 года назад

When I was a kid my dad got me a "Ford Buzz Coil" to mess around with. I am sure the older Plasma Fans on your channel would love to see one of these wonderful wooden boxes featured on your channel! I am sure you can pick them up on Ebay or elsewhere for not TOO much money! As always, this was an interesting and entertaining video!

@PlasmaChannel 2 года назад

That's a great video idea, actually. Thanks for the idea, and glad you enjoyed my video. Feel free to share it!

@rickhobson3211 2 года назад

@@PlasmaChannel I've always wondered if the current produced by them was AC or DC. They're fed DC when run from batteries, but go through that vibration/contacts system to power the internal transformer... so who knows?

@jaydeedub 2 года назад

Great viddy, awesome project. Congratulations! You've earned a new sub and a like.

@PlasmaChannel 2 года назад

Hi Jason, welcome to the family! I appreciate you.

@johnnycash4034 2 года назад

I've always said it. This channel has CLASS.

@PlasmaChannel 2 года назад

My man!

@ChrisBGramz4u Год назад

Ahhh, 555. Good times, good times. The things one can build with you 555, Oh the memories.

@the_ALchannel 2 года назад

Great video as always :)

@PlasmaChannel 2 года назад

Thanks! I have played with the circuit so much and it refuses to break. I love it.

@theplasmaprince8651 2 года назад

7:18 Mad respect. Please rickroll us with your new device sometime soon!

@izzieb 2 года назад

Little plasma based heart - what a delightful play on words.

@PlasmaChannel 2 года назад

My heart may be little. But it's at least made of plasma.

@MrRcordial 2 года назад

I love the DBZ cameo. I love this build.

@PlasmaChannel 2 года назад

Haha glad you got the reference! Thanks for dropping a comment. Also, thanks for supporting my channel Robin.

@MrRcordial 2 года назад

@@PlasmaChannel absolutely, i love your channel. It's incredibly inspiring and i love witching it. My son (7 years old) also likes it a lot. It gets him thinking abd now he askes all kinds of questions about plasmas and science in general because of your channel. So thank ypu so much for all the awsome stuff you bring to the community.

@AdamosDad Год назад

My fav in the video is the Zenith radio, my dad had one in the 60's

@danielramirezcruz.2209 2 года назад

Good work l love it thanks for posting...

@EnricoMarangonJunior 2 года назад

Thanks for the answer in my last comment. So I could see this video. Plasma Channel you're good nerd!!

@constantprayerwarrior 2 года назад

I don't know how but I missed this video, I'm glad I found it

@PlasmaChannel 2 года назад

I'm glad you found it too :P

@andymuzzo8568 2 года назад

Awesome. This is a great video.

@PlasmaChannel 2 года назад

Thanks Andy. Much appreciated.

@JackStarkLabs 2 года назад

I browse lots of electrical and mechanical engineering channels but i subbed because I'm also from Seattle and I've been to that exact junkyard. Also I've always wondered how radio towers worked and this has provided some very interesting insight. See ya around man and keep up the amazing work!

@PlasmaChannel 2 года назад

Hey! You’ve been to the junkyard in snohomish? They totally overcharge, but very kind people.

@JackStarkLabs 2 года назад

@@PlasmaChannel I've been to so many of them but my favorites are the ones in Snohomish, black diamond, and another one near burien.

@Edmorbus 2 года назад

Nice build

@JimCliffe Год назад

The transmitter idea is an interesting step back in time. The first radio transmitters, circa 1900, were spark gap sets. Before electronic (vacuum tube) oscillators and amplifiers were available, high speed mechanical alternators generated AC power, which was on/off modulated (i.e. switched) to a spark gap to generate RF energy. As you can imagine, this was down in the kilocycle range. Lee de Forest's vacuum tubes allowed RF frequencies up in the (gasp!) megacycle range. That was high frequency, or HF. Now, HF is close to the lowest RF range used, which make it's name an amusing paradox.

@bkillamkillam8677 2 года назад

Love the plasma thing, however, couldn't help myself from mentioning that cool video you show in this clip.: Rick Ashley's :: Never gonna let you go...🎶🎶🎶... Good work, plasma guy...💪👍

@vedangsinghal3038 2 года назад

Awesome video

@AllLoudNation365 9 месяцев назад

I love B.E.A.M.D.I.C's They are my favourite drivers for ignition coils.

@deadpxn3517 Год назад

I've forgotten most of what I learned by now, but I remember the 555 timer being the first chip I learned about in my electronics class at school so hey I know something lol!

@karrarmohammed4067 2 года назад

its a great project dude

@scienceorfiction136 2 года назад

the best video i've ever seen on youtube 🥰

@PlasmaChannel 2 года назад

Wow, thanks! Feel free to share it, and spread the word then!

@MichaelMomany Год назад

in 1978 I created a portable Star Wars Force wand from a neon tube and a very similar circuit using an automotive coil. It shocked everybody when I went outside at night and swung it around and altered the pulse ratio.

@Slowly_Going_Mad 2 года назад

Excellent video as always. I do actually remember the Subaru plasma and one of it's followups the plasma vortex. The memes were a nice touch and good lord have mercy I can't believe you mini Rick rolled us. 🤣

@PlasmaChannel 2 года назад

thanks Mad S! Yeah that Subaru video seriously exploded lol. I was shocked, and grabbed a huge beer when it did. "never gonna give you up...never gonna make you cry..."

@Teslaundmehr 2 года назад

As always, amazing job Jay! Your video quality is unbeatable!

@PlasmaChannel 2 года назад

Thanks Leon! My man, your recent hovering drone video was pretty cool.

@zykodos1285 Год назад

5:43 - Ahh yes. The "I'm doing this search through a junkyard for this very specific part for the viewers!" Excuse. You know, I know, I'm pretty sure all subscribers to this channel know--that part was to satisfy your deep nerdy love towards these projects. Lemme just say.. What a classic! I used to say stuff like that to my parents when I spent all of my allowance money attempt to build a handheld high powered laser from the diodes in pc dvd-writable roms lmao

@jc301-OTECH 2 года назад

Liked subbed.. never heard of this but I'm already addicted n you are proper funny..

@Manawyrm 2 года назад

Have you played with the TL494 chip yet? Highly recommended, pretty ideal for this kind of application, should work much better than the NE555.

@PlasmaChannel 2 года назад

I have not heard of that chip. I'm not incredibly familiar with individual IC's

@justinbanks2380 2 года назад

Jay, this video/project is epic! I love seeing how much your project and video quality has improved over time. Also, your on screen personality has really grown too! Dude, this is why I continue to follow and support you! Can't wait to see what you do next! All the best on your journey of going full time on this!

@PlasmaChannel 2 года назад

Justin, you seriously rock bro. Thank you so much for supporting my channel!!!! I have some HUGE things planned for this year. I'm talking huge.....like filming the largest tesla coil on the planet :P

@justinbanks2380 2 года назад

@@PlasmaChannel can't wait! (Well, you know take whatever time you need, don't rush or burn yourself out... You know what I mean... 😂)

@1st-Rogue Год назад

BEAMDIC, physics baby, subbed

@sanderalex4981 2 года назад

Nice build! 👍I've watched your previous videos that play music with the arc of a Tesla coil before ,so I wonder if you using DRSSTC/SSTC's interrupter directly drive the ignition coils instead of just using a single 555 driver circuit would be way better than this?🤔

@PlasmaChannel 2 года назад

Hm. That would take some work to test out. Good idea though

@rondraw6460 2 года назад

@@PlasmaChannel I've tried this circuit before and it worked perfectly😀 !The SSTC‘s interrupter as a driver and it can only use square wave music input, but because of this, the music arc is almost no noise! It's really worth to test out！⚡

@canned3880 2 года назад

Ok the Bluetooth to radio part is epic

@keithking1985 2 года назад

BEAMDIC. : ) & the little trade mark was a nice touch..

@PlasmaChannel 2 года назад

BEAMDIC, NOW AT A STORE NEAR YOU.

@secretagent5658 2 года назад

This is pretty cool. I love this idea! What else can you apply this to? It kinda makes me curious if you can make it transmit to an Infinite amount of speakers. Each speaker has its own independent power source and receiver. Or would the power draw from the emitter be too much. Just like you can only load a Tesla coil so much before its power level is to low. Also I loved the exaggerated nuclear bomb explosions hahaha!!! Hahaha! I loved the acrylic gods joke it was pretty funny 😄. This is a pretty nice video and build. Yes, I spark all of the time bro. Stay Classy

@PlasmaChannel 2 года назад

Yeah, it can be applied to any circuit that relies on PWM or pusles in general. Glad you enjoyed!

@tobiaslinn7964 2 года назад

Hi Jay, sweet build as always!!! Let me know if you ever need acrylic laser cut for any upcoming projects. I’m in the Seattle area as well and happy to help! Also: best of luck going full time! More plasma content, whoo hoo!!!

@PlasmaChannel 2 года назад

Hey Tobias! I appreciate that, and will save your email for said purposes. Can you email me? Look in the "about" tab under my channel page.

@mhovmark Год назад

Sounds great.

@empmachine 2 года назад

If you hate the 555, just use an Arduino (yea you gotta learn some interrupt stuff, but if you just copy and paste-modify one of their examples, it is very easy).. You could even use a driver board addon thingy (just to isolate the arudino).. Now it might be a bit more expensive by a few coffees, but at the same time you'll spend very little time fighting the waveform (cuz you could solve that issue in software vs iffy-pots|caps|resistors).. IMHO you save overall since I consider time expensive.. Ur really missing out on the microcontroller based controlling, once you have some things working, it's super easy to lego that stuff up.

@Mis73rRand0m Год назад

I think you can protect your 555 ICs by using them to trigger a fast switching mosfet or possibly even a BIP373 Ignition driver - while they are limited to 14V input... well you should check the datasheet; they're built to make arcs inside of combustion chambers so they may be perfect.

@rellikpd Год назад

A lot of the concepts in this build are familiar to me as I've been doing Garage Science since I was a toddler... I've never really worked with acrylic like you are in this video though (I have used it before, but usually as just flat pieces to make shields or displays) so, I was curious; What exactly are doing doing with that little blue tool that you seem to be using when "gluing" the acrylic pieces together? I'm curious how you're gluing these together.

@maksimatic 2 года назад

I KNEW that Tap Plastics looked familiar😉 AND the junk yard too! Although I wouldn’t really consider the latter anywhere near Seattle, but hey I get it👍🏽and totally dig it👌🏽

@PlasmaChannel 2 года назад

I am only familiar with a Plasma Plastics.

@Cinematography796 2 года назад

That's really good to sound

@PlasmaChannel 2 года назад

lol thanks, painful huh?

2 года назад

each dayu better 🥺🥺❤❤

2 года назад

Thx for the heart! This made my day better ❤️

@em0_tion 2 года назад

Cool experiments. 👍 That Zenith radio deserves a thorough cleaning imho. 😁

@jeromtech963 2 года назад

After a long time , whenever Jay posted a video 😍

@PlasmaChannel 2 года назад

It took me too long for this video.

@viraj1304 2 года назад

After watching a few videos I am impressed I was already subbed to channels like Veritasium, Action Lab, Nilered and now I am subbed to you Good Job

@WikiLearn 2 года назад

Glad to see B.E.A.M.D.I.C. was a success. Physics! Btw, I know next to nothing about high voltage circuits, but just wondering if you can increase the frequency of the background pitch to above human hearing levels to eliminate it that way, will it work?

@PlasmaChannel 2 года назад

Glad you enjoyed BEAMDIC lol. So that’s why I talked about flybacks. You can’t drive ignition coils up at that range. It’s not a matter of circuit. It’s a matter of transformer. Circuit can go WAY HIGHER in frequency.

@WikiLearn 2 года назад

@@PlasmaChannel Ah! I see, thanks.

@nripeshkumarmishravinayak664 2 года назад

Amazing!👍

@PlasmaChannel 2 года назад

Thanks!

@nikscha 2 года назад

you should do a tutorial about working with acrylic, this is awesome stuff!

@PlasmaChannel 2 года назад

Haha, it would be full of me screaming and threatening to give up halfway through the project #reallife

@nikscha 2 года назад

@@PlasmaChannel lol. Well the results you archived are jealousy-inducing

@NinjaForHire Год назад

Ah pretty cool my dude. 😎

@mickymouse7717 2 года назад

just found your channel, real cool content your producing.. i just sub your channel keep up they great work bro

@davidhilton7780 2 года назад

Makes a neat radio

@dalenassar9152 8 месяцев назад

GREAT VIDEO!! I have built most of my "boxes / containers" with copper-clad PCB ans (solder) welding. I have many needs for plexi boxes like yours Sooo...can you tell me what glue that is you use on your plexiglass...will it work on other types (such as lexan) too?? I am about to do my plexi cases.

@Buzzhumma 2 года назад

Full time 😳. Is that even still possible with youtube algorithms? Good luck matey !

@paulameloot9380 Год назад

How about adding a couple of LEDs blinking at an adjustable frequency around the frequency of the arcs ? That way you may get a cool strobe effect where the arcs look like they’re in slowmo !