Gift Gone Wrong: Resin vs. Aluminum

Подписаться 772 тыс.

Просмотров 5 млн

50% 1

I reached out to Carl Jacobson to see if he wanted to do another collaboration with me. Since he sent me something rare and beautiful (paint chips) I decided to return that favor by sending him something awful...
I've wanted to show the whole casting process for a while. It is a LONG process but I try and show you ALL the steps, including my math problems. I then sent this bowl blank up to Carl to have him turn it into something BEAUTIFUL!
Bowl Turning video:
Aluminum and Polyester Resin Bowl: • Aluminum and Resin Bo...
Carl's Channel:
/ haydenhd
~~~
Full write up coming soon: shop-time.net
Want To Make this Project?
Mold Making:
Plexiglass Sheet: amzn.to/2qbhPOM
Hot Glue Gun: amzn.to/2qbwbyO
Mold Release: amzn.to/2qjU9Ht
Modeling Clay: amzn.to/2oB3NJj
8lbs of Silicone (whoa!): amzn.to/2qjOGQK
Food Scale: amzn.to/2oQB8fp
5qt Mixing Container: amzn.to/2qjO1yY
Casting:
1qt Mixing Containers: amzn.to/2pmIuIz
Clear Polyester Resin: amzn.to/2lxyQ66
Smaller mixing Cups & Stir Sticks: amzn.to/24lvstM
Black Pigment: amzn.to/2qjUmKC
Silicone Rubber Mat: goo.gl/8hsDFx
Rubber Gloves: amzn.to/1T0wIyZ
Please like and share!
Facebook: / kludge1977
Twitter: / kludge1977
Pinterest: / kludge77
music by Jason Shaw@ audionautix.com

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6 тыс.

@MiNombreEsElCamaron 6 лет назад

Ounces are a measure of weight, not volume.

@peterbrownwastaken 6 лет назад

fluid oz. It's a volume measurment...

@nickciggs3968 6 лет назад

Just use the metric system already, where volume and weight have easily distinguishable and separate units of measurement. Also, the metric system uses the base ten number system. You almost can't fuck up.

@AtlasMays 6 лет назад

Nick Burns That could work, but that would be way too convenient. You can't help people who don't want to be helped.

@cleogrove7729 6 лет назад

I'm sure he's measured accurately with oz before... no one said he wouldn't be helped but I don't think he needs it

@peterbrownwastaken 6 лет назад

And If I had grown up in a country that used it, I'd feel the same way. I get it. You like the metric system... :)

@Fab4Sunrises 5 лет назад

Honestly the best part of this is watching you go through the Five Stages of Grief pouring this thing

@MnJiman 5 лет назад

O gawd your right lol

@vc2702 5 лет назад

Lol

@kkmcknight5463 5 лет назад

😆😆😆

@Nails_By_Kimberlee 4 года назад

According to Google, the five stages of grief are denial, anger, bargaining, depression and acceptance. I'd say you nailed this one lol

@CoolAsFreya 4 года назад

From 11:00 you can see him go through all five in a very short timespan

@tailscrafted4968 4 года назад

7:45 "Add the pigment powder" Good sir That is a tub of pure *_VOID_*

@snuckytoes8427 3 года назад

That’s how you get a true black. You conjure the void, that is why it’s called Black Magic.

@this_commenter_had_a_stroke 3 года назад

bruh of course he needed more resin for this than he measured, the void kept consuming his resin

@moistenvelopes 2 года назад

Vantablack

@trstmeimadctr 7 лет назад

Watching you lose your sanity over the magic mold is the best thing ever.

@fluteplayerify 7 лет назад

Was the silicon mold stretching?

@teron281 7 лет назад

Roddy Lawrence The aluminum shavings are very thin so maybe they dont have a small volume....

@dutchdrifter8740 7 лет назад

teron281 exactly what I thought. The shavings have a lot of surface area but hardly any volume.

@awkwarddinosaur9518 7 лет назад

But still, the wood plug...?

@trstmeimadctr 7 лет назад

I did some rough estimates, assuming the bowl and plug are perfect hemispheres, the wooden plug should only take up like 11% of the volume.

@chaosopher23 5 лет назад

You seem to have stumbled upon some really difficult to obtain British science fiction technology, where it's bigger on the inside than on the outside. It's not an easy thing to use, but you'll get the hang of it.

@ace_of_cups4096 5 лет назад

Love this

@morganmorgan3917 5 лет назад

ayyyyyyyyy

@lilylou3848 5 лет назад

It’s the T a r d i s

@random02735 5 лет назад

*first video I watched of him* "Since I made the gummy bear axe" I think im going to like this channel

@Richard-Freeman 4 года назад

Hahahahahahaha... Thanks for the laugh!

@kingofallfrogs 4 года назад

Welcome to the cult

@yuvalsela4482 4 года назад

homestuck pfp, huh

@jjpg3923 3 года назад

*Kurloz profile pic*

@ahejoey2245 3 года назад

Bro thats exactly what happened to me 😂

@hellodumzo 7 лет назад

I love how black the dye powder was. It was devoid of all light. So cool.

@checksum00 7 лет назад

Check vanta-black, it is awesome but pretty much impossible to get a hold of.

@parkerbenz 7 лет назад

DeadBeatFlyingJackass reaallly wish I had some of that stuff painted on an irregular shaped wall, with jagged edges and such. Dont really know why, but i want it!

@knusern 7 лет назад

Nunya Bizniss I know! 🖤

@maximim220 7 лет назад

DeadBeatFlyingJackass yeah because anish kapoor has artistic licence for it and its also bad to breathe in

@coalforged9339 5 лет назад

"Carl, I made you a murder bowl" "Oh hey, thanks Paul, the last one fell in the orphan stomper."

@I_am_a_human_not_a_commodity 5 лет назад

Next to the blood canal. And the meat dragon.

@DAPTXDC4869 5 лет назад

But Paul is dead!

@ShyDigi 5 лет назад

Sarah Bergmann the sound of forgiveness was Carl screaming and falling into the lake into silence 😭😭

@gyzardo3648 5 лет назад

Sarah Bergmann fuckin despacito

@SuperCityscan 5 лет назад

Caaaaaaaaaaaarl! CAAAAAAAAAAAAAAAAARL! You must finish your work, Carl!

@M4T1J4P0 4 года назад

I've been trolling for close to two decades, but I haven't managed to troll anyone nearly as much as that bowl pour trolled you.

@william84120 5 лет назад

1 the mold is not filled with water to the top 2 some water splashes out of the measuring cup 3 shavings are really thin so take almost no volume (you can make a lot of shavings with a small piece of metal)

@evelgreytarot8401 5 лет назад

Not to mention he Pushes the shavings out from the center instead of removing them causing the height of the shavings to increase therefore needing more resin to cover it. He did quite a lot to throw off his calculations.

@florianh5067 5 лет назад

Do you want to speak the Manager?

@gamefreak2016 5 лет назад

Let’s say that the water was lower and it actually holds 80oz of water. The block of wood (which would absorb SOME resin but not much) would lower the amount of resin needed. The shavings wouldn’t take up a lot, which is right but 76oz of resin should have been near the top if not enough

@James-hr3yh 5 лет назад

@@gamefreak2016 76 WAS close to the top

@murpup 5 лет назад

4. the resin is much more dense than water. For the same weight in oz, it will consume less volume than water

@gabriel-dx9hw 7 лет назад

This is so funny every time you put another 20 ounces in I lost it

@Pho3nixFlam3 6 лет назад

gabriel same

@sasori144 6 лет назад

gabriel my kind of comedy

@charlesgreaves3293 5 лет назад

Not sure if this has been said already, so forgive me if it has. Aluminum curls take up almost no real space. The curls are very thin and curl in on themselves, despite the volume they consume in a bag, the resin will fill the void and the aluminum will hardly displace a thing.

@chartle1 5 лет назад

I bet all that Al was maybe only a few volumetric ounces.

@davidbilec3009 5 лет назад

Aluminum Shavings are curled very flat pieces of metal, they are actually an extremely poor filling that are deceptive, they occupy a larger space than the volume they displace. If you melted those shavings down you would probably only displace a fluid ounce of water which is why you needed so much resin. also you didnt fill the whole mold there was a large top area not filled with its circumference filling it uses more as its diameter increases.

@Oscar-gx2yf 4 года назад

Also, he was just rubbing his hands and fingers all inside them! Big no no.

@PrismZet 4 года назад

Was gonna say I just saw this but if he had weighed that material, and compared it to a piece of aluminum the same weight I bet it's like 5cm square tops. So only like maybe a cup of infill, not very much at all. Plus I bet that silicone mold flexes a bit, with the weight inside it and he didn't completely fill it when measuring it, probably 10% more than he wrote.

@josephpeters7014 4 года назад

David Bilec thank you

@lisadhall01 7 лет назад

thank god for your wife, the black was the best option by far, the finished product looks extraordinary

@bryaunakerr6186 7 лет назад

" it's not a mold, it's a black hole"" That it me

@sepiritsgood4712 7 лет назад

Judging by the cost of materials!

@2DMax00 6 лет назад

I'm convinced that he's accidentally created a evil magic item, and it just requires that much resin as a sacrifice for it to work.

@standbyme6395 6 лет назад

That's what the net says

@kevinfroggatt6252 5 лет назад

SEPIRITS G

@mattburns7182 5 лет назад

No my ex she has a black hole in fact 3 black holes, she never met a weiner that was too big for her.....sorry too many hours straight on RU-vid 😉🤣🤣🤣🤣🤣

@shaymayca1 7 лет назад

Hey Peter! You should try making your own bowling ball! Put some wacky stuff in it. Go play a few games and see how it works. Who else wants to see a bowling ball? Like it up! :D

@shaymayca1 7 лет назад

I should clarify-- you should make your own bowling ball out of resin.

@seventhward3187 7 лет назад

shaymayca1 he should make it transparent and fill it with a bunch of cool things like screws and gears and stuff

@faye.932 7 лет назад

Carson Long yas

@CarrotSlat 7 лет назад

The alley might not let him use it if it's translucent and they can see screws and stuff in there.

@CosplayCassy 7 лет назад

James Hardy I worked at a bowling alley, translucent balls are very popular on the lanes. I think as long as it follows the weight classes it should be allowed.

@andre-michelgoulet6933 5 лет назад

Next time, when making a round mold in a square box, block off the corners and save yourself a significant amount of silicone (stuff ain't cheap).

@papaversomniferum5247 5 лет назад

André-Michel Goulet maybe he’s rich and is rubbing it in your face? Jk jk

@lilanesp3554 5 лет назад

no..it needs to be square for support on all sides or it will not settle in a perfect shape..silicon is soft.

@lilanesp3554 5 лет назад

no... it needs to be square for on all sides..or it will not settle in a perfect shape..silicon is soft.

@hakazesan 5 лет назад

Or he could have used the bowl as a mold to be cheaper. But it's not the point i guess. 😂

@wingedfish1175 4 года назад

@@lilanesp3554 use an octogon

@CarlJacobson 7 лет назад

It was so cool to see how it was made, thank you so much I love it!

@peterbrownwastaken 7 лет назад

Thanks for taking one for the team. I hope your knuckles heal up soon!

@ianthomas3653 7 лет назад

Awesome! Need more black?

@peterbrownwastaken 7 лет назад

Those pigments are still my favorite. Much better results than I ever get with the liquids.

@Highstranger951 7 лет назад

Peter Brown the inside of the carbon black bottle is the darkest place on earth

@redjack2629 7 лет назад

Peter Brown - A little on the expensive side, but you should try some of the stuff from SolarColorDust.com. I use a bunch of their stuff and pearl-ex's colorshift pigments (much cheaper. SCD products range from $5 for 10grams to $25 for 1gram whereas pearl-ex is reliably $7-$8 for 20 grams) in my casting and painting. some people feel it's a bit gimmicky, but to be honest... I really like me some color-shift nebula pendants, or stuff that changes color in low-level UV (like sunlight)

@RighteousFondue 7 лет назад

In the past you said that resin-casting resin shavings/turnings is pointless since the shavings just turn invisible in the resin, but what about casting colored shavings in a clear resin? Then you'd have a bunch of cool shapeless colored streaks and stuff in the resin which I think could look amazing.

@jth_printed_designs 7 лет назад

Righteous Fondue I thought the same thing. If he would've used a 1/10th of the aluminum shavings and used a translucent resin, it'd look pretty sweet.

@hisbodywasweak249 7 лет назад

Well hell. I came up with this after his epoxy in epoxy episode and I guess someone beat me to the comment! I really hope he does it though, that would be really cool!

@mickjmcgregor4384 5 лет назад

I was a composite engineer for 7 years and worked with experimental resin and fibres from experimental fibres to experimental resins and DCPD and open molding was mainly used as apposed to injection molding. We used laminated chipboard to make molds sealing joints with mold wax and used release wax or spray. in this case i would have made a suspended center mass,and also used vibrating table to remove air pockets. The smell from the rein is Styrene gas and causes lathargy and also be aware that if unused catalized resin can burn and the smoke given of is toxic and highly carcinogenic, always poor water on top of unused resin.

@erkkaheinonen3343 5 лет назад

Pour not poor

@gregmauchline9146 4 года назад

And we found " that guy".

@benfletcher8100 3 года назад

I love how Peter’s mindset for picking colours is “When in doubt, ask the missus”

@lens6522 6 лет назад

So, I think I know the series of mishaps that occurred for the 75oz to be misleading. 1.) The mold is not entirely full with water when you measured the volume. 2.) The aluminum shavings take up almost no space because they are so thin. 3.) The silicone mold deforms even with the tape on it. 4.) Black magic. That is all.

@mathk135 6 лет назад

MrTinyToes that^^ and the fact that he cast the outside of the bowl vs the inside of it which would hold 75oz

@davidfletcher8197 6 лет назад

I think it's basically just that the resin is denser than the water he used to test the capacity. A cup of resin will weigh more than a cup of water, so a bowl that holds 75oz of water will hold more than 75oz of resin. This is why you use volume like litres or something instead of weight.

@hjaltethostrup8442 6 лет назад

Wait is OZ a unit of weight or unit of space?

@NWolfsson 6 лет назад

I went to check on wiki and HAHAHAHA both -.-'' Actually both in Imperial system, in the US system it appears to be a solely volume unit soooo nope, 75 ounces of resin and 75 ounces of water /would/ take the same space if he measured both as volumes. But clearly there was room for mistakes, with the soft silicone mold and the measurment of the bowl's inner volume not taking into account the thickness of the bowl.

@jerrythomas7902 6 лет назад

MrTinyToes g

@reisekeller6859 5 лет назад

I LOVE how he's convincing himself that the mold isn't bottomless! HAHAHA!

@PanduPoluan 5 лет назад

"I'm quite sure I won't to pour in 20 oz. Already 56 oz in there, and there's that giant plug..." Moments later... "HOLY SHIT I'VE POURED 76 OZ WHERE HAVE THEY GONE" 😂😂😂

@johnscalise9888 5 лет назад

@man2452 5 лет назад

John Scalise what does this mean

@dextermorgan6352 7 лет назад

I wish you would do something like this but with a whole bunch of glitter! Maybe some good holographic glitter and clear or really dark blue or purple resin

@bauerbach1 7 лет назад

would be interesting. but might need to be careful that the glitter doesnt try to float or sink. keeping them evenly dispersed during the curing period could be tricky. Maybe it would be fine.

@caitlingwin5844 6 лет назад

That would be fun

@TactownGirl 6 лет назад

tori beat me too it >.>

@LetsBuild_withBabyByrd 5 лет назад

"Caaarl, I got you a murder bowl!" 😂💙 love llamas with hats

@nevernightx8065 4 года назад

Mary Newell omg i miss that series! It was the best

@wearethechange128 4 года назад

I legit got ptsd when I was 9 from that

@David-ne2cc 7 лет назад

If you wanted to make a bowl, why don't you just put a smaller bowl to make the shape of the inside first and then pour the resin?

@peterbrownwastaken 7 лет назад

That is an excellent question! When you're turning on the lathe you want as much freedom of the end shape as possible. I added the wood plug to take up some room, but I wanted Carl to be able to make the end form whatever he wanted. Short and squatty or tapered up. More bulk in the blank means more freedom of design.

@gollumthedog 7 лет назад

Peter Brown I just wanted to say I bought resin, dye, a scale, mold release and measuring cups just because of you. It's fun trying projects. Thank you.

@Yonatan24 7 лет назад

And measuring the weight of the alumimiumiumium / by weight per I don't know how much should give you the volume, so you know how much resin to add...

@kit2799 7 лет назад

David Dyer well that wouldn't be too fun then

@justicecurry3658 7 лет назад

David Dyer video would be too short.

@nomoreheros3775 7 лет назад

I'm subscribed to many people but you're the only person that I watch all your videos that appear in my subscription box 😊

@peterbrownwastaken 7 лет назад

Thank you!

@nomoreheros3775 7 лет назад

also the end result was worth all of it! xx

@imnotimportant 7 лет назад

Make resin screwdriver handles with the corresponding screws inside!

@KainYusanagi 7 лет назад

Holy shit this is a great idea. Or mill the knob ends to represent the screw heads that it's to be used with.

@Penelope222 7 лет назад

Shiddy I love this idea!

@darkeyce02 7 лет назад

Shiddy how about no.

@TheMarc59320 7 лет назад

Shiddy awesome idea

@diordematron11 5 лет назад

Love the "left over" hobby box..its so organized...mine looks terrible..lol Hmm..just realized this is an old video..lol

@MissCin101 7 лет назад

Uses same glass bowl from previous video. That's some A1 continuity, binch. I hope to see more of this bowl in future endeavors.

@el_barjak8550 5 лет назад

I’ve already watched this video multiple times, but I just thought of an idea. Peter should do a white version of this bowl blank, it’ll be like the yin and yang of death bowls.

@AaaaNinja 5 лет назад

If he did a white bowl version he would find out that he mixed way too much resin on the first pour. Actually, he might actually just make back the amount of resin he used up making the black bowl.

@azuritet3 5 лет назад

If they make another one then it should be a matching plate. A white plate.

@MaryAnnNytowl 5 лет назад

@@AaaaNinja, how do you get to that hypothesis? Too much resin poured on the first pour, when it took 3 more pours to actually fill it up? That makes zero sense.

@grumpus27 5 лет назад

@@azuritet3 With copper shavings

@azuritet3 5 лет назад

Or black plastic shavings in silver resin.

@MikeWarren 7 лет назад

I approve of your diabolical gift of those aluminium shavings, Peter. I knew you'd find a good use for them :)

@peterbrownwastaken 7 лет назад

Thanks for the aluminum Mike! Maybe I can bring a bag the next time I'm in the neighborhood? :)

@seemenow8204 7 лет назад

Peter Brown what is a murder bowl?

@IAmTheSkinThief 7 лет назад

SeeMeNow What he just made.

@MissMary821 7 лет назад

SeeMeNow It's a reference to Llamas With Hats. Search it on RU-vid and you'll understand. It's funny stuff.

@aiko1697 5 лет назад

For my next trick, I present to you: The vanishing resin bowl. XD

@dragonoidman 7 лет назад

you should definitely try a resin flower bowl :D either by using petals loads!! or petals or the full flower head itself again loads!! or put both in a bowl :D

@Paige0230 7 лет назад

You should create an amazon wishlist for things you want/need for future projects.

@peterbrownwastaken 7 лет назад

I have no idea what I'm going to make next. :)

@Hellproduction21 7 лет назад

Paige Kindred Rick and Morty props

@mattthomas4026 7 лет назад

+Peter Brown Rick and morty!!!!!!

@Hellproduction21 7 лет назад

Matt Thomas thats my idea :(

@mattthomas4026 7 лет назад

Hellproduction21 I'm cheering the idea on

@howardrichburg2398 6 лет назад

Saw the results on Carl's channel. Just awesome. I think copper shaving and turquoise blue or cobalt blue would be great.

@sugandspice9397 6 лет назад

That's a great idea. It would look amazing with light going through it

@treed5953 5 лет назад

I was also thinking brass and copper would be pretty cool looking. But I wonder how much more"grabby" it would be when turning it?

@terricampbell3179 5 лет назад

"Set timer, one hour." "Ok it's set, and the suspense is killing me." Hahaha

@animalmother556x45 7 лет назад

..........okay, I haven't seen anyone else mention this, so here it goes.... Those aluminum chips take up hardly any room because it is an illusion that they "look so big". The amount of aluminum you put in the mold hardly weighed anything, right? If you took that same weight, but it was just a solid block of aluminum...it would be a rather small block.

@majorphysics3669 7 лет назад

animalmother556x45 sorry, tons mentioned it

@animalmother556x45 7 лет назад

Teren Essex well now I just look like a copycat great

@hunters9430 6 лет назад

No they take up a lot of room not volume. ( in whiny 12 year old voice) THERE IS A DIFFERENCE!!!!!!!!

@RylanStorm 6 лет назад

Doesn't account for the fact that the mokd measured 75fl.oz and he added over 76fl.oz resin.

@animalmother556x45 6 лет назад

Rylan Storm No. He measured wrong. Watch the video when the mold is "full" of water....it is nowhere near full. That extra 3/4 of an inch in a mold that wide would equate to MANY ounces.

@bayramljujkovic8542 6 лет назад

I’m honestly disappointed by how many people actually think he is using the mass of the water to calculate how much resin the mold can contain. Use your heads, the man can obviously tell the difference between the density of resin and water. Not once did he use a scale to measure the weight of the water or resin, he used volume, not weight. Also I do agree that the metric system is superior and blah blah blah... but he was obviously raised using the imperial system so stop giving him so much crap for it.

@ChannelNotInUseNow 6 лет назад

PREACH

@copyrighted4382 6 лет назад

But when you're working with volume mass is important because volume=mass/density

@rokoplayzandmore7812 5 лет назад

He filled the mould with water and put it in a measuring jug that measures fluid ounces. I'm british and followed it without getting a headache.

@PartTime_Chef 5 лет назад

Finally someone got it lol thank you!

@michaelagalligan7077 5 лет назад

Bayram Ljujkovic omg a whole paragraph

@HoneySoakedSeagull 7 лет назад

Grant Thompson has a video about a thing he called proto putty. It's just caulking silicon and corn starch, might be an idea to see about using that to create some moulds, gives you a bit more freedom and it's a hell of a lot cheaper.

@MaryAnnNytowl 5 лет назад

I have also seen people use the caulking silicone blended with soapy water, too. I will test both different ways, I think, to see which is easier to work with. I am here because I've been watching mold-making and resin-pouring videos, in fact. But I have a project I will need to know how to do this stuff to complete, so... here I am. ~waves~

@barkbark479 5 лет назад

You getting pressed over the ounces is hilarious

@burly636 7 лет назад

The aluminum is very thin, looks volumous but not really. My husband used resin with wood turning around the rims of wooden bowls and we intended watch parts, clay faces, etc. It is very fun to do. Now he does basket illusion pieces. You would not know they are solid wood. They look like Indian baskets. Time consuming, but people love them. I will have to show him this.

@Rowynn71 7 лет назад

burly636 I wish this answer was higher up, because it's correct. Those shavings are less than 1/100th of an inch thick in most cases so they might look large but they don't take up much volume, just a lot of space.

@fleimlehner 7 лет назад

The answer is probably to do with the resin shrinking in volume as it sets. He put in 75+ ounces into a 75 ounce mould with a wooden block in it. The only explanation has to be the resin shrinks when setting.

@widdley24 7 лет назад

burly636 yup if he melted the metal he'd probably only have about 50ml volume

@JubioHDX 6 лет назад

Dirk Leimlehner Must be that considering from what he said it sounds like he poured ~86 oz into a 75 oz bowl 😂

@MaryAnnNytowl 5 лет назад

@@JubioHDX, no, that's NOT it. Watch it again. When he got the supposed 75 oz. measurement, he got it by *(almost)* filling the *mold* with water, after the bowl was removed! His biggest mistake was not filling the *mold* all the way up to the *edge* of the bowl's lip shape (in the mold) with water.

@DansEuropeVlog 7 лет назад

i honestly really like that you show how you get frustrated with your projects

@NotCallum 7 лет назад

the benefits of the metric system

@seigeengine 7 лет назад

I can confirm that the metric system does not allow you to violate the laws of physics.

@peterbrownwastaken 7 лет назад

I will say, that I'll be using grams to measure the silicone next time. That 1/10 of 5lb 9oz math sucked.

@joecos5370 7 лет назад

Peter Brown more confirmation that the metric system is slowly taking over.. Inch by inch 😂

@seigeengine 7 лет назад

This is why computers are awesome. Google chrome happily answers "1/10*5lb 9oz to oz" right in the search bar :P

@jesteris25 7 лет назад

give the metric system an inch it will take 25.4mm

@twothreebravo 5 лет назад

7:30 in and I have no idea what I'm watching but you've earned yourself a new subscriber

@crisptoastx 5 лет назад

Youre watching a man play with resin and aluminum

@TaylorL1010 7 лет назад

Try and make a sand/hour glass out of resin!

@Maggie365 7 лет назад

TaylorL1010 that would be so cool!!

@aToast3r 7 лет назад

hourglass frozen in time...

@clappedjavi1422 7 лет назад

TaylorL1010 YESYESYESYES

@biffrude828 7 лет назад

TaylorL1010

@evilmaafaa5223 7 лет назад

Anastasia Majick "out of resin" not glass

@danthemakerman 7 лет назад

Note to self: Do not accept friend request from Peter Brown.

@sansthepungeonmaster5864 7 лет назад

Note to you: aluminum shavings are very fine, and have remarkably low volume, if you reduced it to a powder, you would likely only get approximately .89 lb/cubic inch, very near the density of a homogenised cube. Assuming the bag was one pound, you'd get just over a cubic inch of aluminum. Edit: you might do better with powder later on.

@johnpossum556 7 лет назад

He should have weighed the shavings before adding.

@bigtank2185 7 лет назад

Dan The Maker Man still doesn't explain the positive discrepancy of the resin itself...

@sansthepungeonmaster5864 7 лет назад

umm.... it shrank as it set? I really don't know much about polyester resin.

@druggedunicorn9323 7 лет назад

Dan The Maker Man 300th like is meh

@Greaseoverwatch 7 лет назад

Led strip and epoxy lightsaber!

@mugglesmonster 7 лет назад

Stolen And Altered yes

@aaronsimpson5074 7 лет назад

Stolen And Altered yeah thats awesome idea

@melody3741 7 лет назад

Stolen And Altered i feel like that would be incredibly heavy and easy to break

@ashravenpb 7 лет назад

if it was reinforced with something I think that would be a bad*ss looking and effective weapon

@Adamant_Consternation 7 лет назад

Epoxy blade and a wooden hilt!

@benjaminyoung2709 5 лет назад

It helps for when you measure the initial volume with water that you fill it all the way up. At 4:58 you can see there is maybe a 1/4 inch where the water does not fill up the mold. Since this is the widest part it would hold more than a 1/4 inch further down.

@Corphish_ 7 лет назад

How has a resin company not sponsored this?

@peterbrownwastaken 7 лет назад

I would gladly sell out to a resin company if any of them came knocking.... Just saying, I can be bought.

@DSNugent91 7 лет назад

peter, RU-vid unsubbed me from your channel???? Not happy that I've missed a few videos... time to catch up 😀

@tokahontas9990 7 лет назад

Peter Brown lmao I feel you man

@kreigdernier9553 7 лет назад

Zach Altendorf i guess even resin companies can tell a waste of time

@MetaMarcy21 6 лет назад

Peter Brown it’s called cashing in :)

@nope_118 7 лет назад

"Will it work?" *nervous laugh* I can relate to that

@pickles3128 7 лет назад

I work at a small company making resin miniatures and our new mold release smells like weed.

@ImWillsZX 7 лет назад

Pickles never a bad thing

@HollywoodColt 7 лет назад

Pickles Smoke some and let us know what happens 😆

@TheJanitorIsIn 7 лет назад

Would you say it smells like a *bowl*?

@akfr0zen 7 лет назад

David Cook, clever😅

@nadiamcnally5521 7 лет назад

I was gonna make a mold, but then I got high.

@SuperKatieThe2nd 5 лет назад

Sometimes I watch this video when I’m sad so I can laugh at the confusion of where the damn resin is going

@VagabondTE 7 лет назад

Silly Peter, aluminum shavings don't collapse. They are thin and wispy but strong. They don't really break and due to their springy shape they probably take up more space than any other kind of shaving. Plus you didn't squish it much because thats dangerous. You basically didn't put anything in there at all.

@ChrisOnline_ 7 лет назад

Peter you should make a tray using playing cards and resin

@TheMannyG 7 лет назад

Clutch4theWin or a game table for playing cards

@thefataltortus9043 7 лет назад

Is that a lamas with hats reference "Carl I made a murder bowl"

@peterbrownwastaken 7 лет назад

That's how you kill people Carl!!

@ianbosss 7 лет назад

You, sir, are awesome

@LimabeanStudios 7 лет назад

Bringing back some middle school memories.

@Corieorieorie 7 лет назад

no its a Donald trump quote

@tek4 7 лет назад

I ain't the only one to pick up on it, owner where is the meat dragon?

@mrgw98 5 лет назад

Wait... mold release is a thing. I seriously wish I knew this A LONG time ago.

@GummyBearRacing 5 лет назад

This is why you learn before you do.

@jintie 3 года назад

Have you never even cooked anything? Buttered a container?? Why would mould release not be a thing?

@FatNebraskaMom 5 лет назад

I love this dude. He's freaking out about the mold. That's adorable.

@chaffystream9553 5 лет назад

Gay

@micecdnwo 5 лет назад

Mould release agent

@micecdnwo 5 лет назад

So they can get the bowl out after

@TheRealLifeNPC 5 лет назад

It's adorable you think it's adorable :)

@nedinnis6752 4 года назад

@@chaffystream9553 ?

@Jdawgmastafail 7 лет назад

Peter, perhaps because the aluminum and resin is more dense than the water you measured it with, it flexed the mold? Even if the expansion is not visible it may account for the 5-10 oz you were missing.

@peterbrownwastaken 7 лет назад

I guess that makes sense. I've got no baseline as I've NEVER poured this much resin before.

@seigeengine 7 лет назад

Don't think so. Silicone rubber is pretty tough stuff, and I'm sure you'd have seen the deformation easily if it was being pressed open that much. He probably just measured wrong.

@chrisc.2783 7 лет назад

Jdawgmasta that and i think he rounded down in the initial measurement, and spilled a bit. also the aluminum takes up way less space than you would expect.

@DanielRomero-qs5pm 7 лет назад

Actually i think that it isn't the point because he used the volume of the ingredients not the weight. so something was wrong in the measurement but i think it hasn't something to do with the density.

@Slemi 7 лет назад

Daniel Romero 75 oz is the amount of liquid you can put INSIDE bowl, but bowl itself has some volume too, it is made of quite thick glass. This together is the volume you need to fill.

@majorphysics3669 7 лет назад

All these people "yOu MeAsUrEd WiTh WeIgHt" lol. How could he have measured with weight without a scale. Obviously it was fluid ounces, he lives in the states or uses the imperial system because that's how he was taught.

@n7hevy32 6 лет назад

Teren Essex imperial system? The fuck are we, the empire to y'all?

@majorphysics3669 6 лет назад

Sam Owens that’s what it’s called... look it up. You don’t know what your own measurement system is called?

@corbeaudejugement 6 лет назад

Sam Owens it’s called the Imperial System though. That’s it’s name.

@Fr3akyBeelie 6 лет назад

Sam Owens How can you be this uneducated? Oh wait you are murican, that's how

@BananaGamerEveryday 6 лет назад

Fr3akyBeelie how people in (REPLYER'S COUNTRY HERE) be racist? O wait its only you.

@jeffreystephens2658 5 лет назад

Siri: "Okay, it's set, and the suspense is killing me." LOL

@rbb5129 7 лет назад

dip it, a cereal bowl out of cheerios!

@avabowen3507 7 лет назад

RB B yesss

@austingx8295 7 лет назад

RB B lucky charms

@bobbofly 5 лет назад

The shavings were from aluminum components within the T.A.R.D.I.S. Simple, case closed.

@MaryAnnNytowl 5 лет назад

Thumbs up for you simply for bringing the TARDIS into the discussion. 😄😊😍

@deadinthename 5 лет назад

You're a genius.

@mattburns7182 5 лет назад

Cute 😉😁🤣🤣🤣🤣

@mspeir 7 лет назад

"Pass the bowl of chips." "No, you idiot! Not the aluminum chips! The potato chips!"

@ratchetfox8111 5 лет назад

No idea why RU-vid's algorithm recommended me this so long after it was originally posted, but I'm glad it did :D

@SpaceGhost1701 7 лет назад

Silicon looks so tasty...

@natalie964 7 лет назад

BaconOddity eat it

@faertehmonkey 7 лет назад

BaconOddity well it's silicone so you probably could eat it and it would most likely just pass straight through, I wouldn't recommend it though

@theaccountthatisntused2957 7 лет назад

These Tide Pods look delicious...

@MaryAnnNytowl 5 лет назад

And smells so nasty. 😄

@Shadow-gc6le 5 лет назад

"If I ever want to make another resin bowl, I'll be able to use this mold." Little does he know

@paularcher3237 5 лет назад

The aluminum shavings are EXTREMELY thin and they have a lot of air in between them.

@donkenkonken6685 5 лет назад

Im guessing because the shavings are so thin it doesnt take too much volume as if it were compressed down itll fill a very small portion of the mould

@christopherbedford9897 5 лет назад

Exactly and dead obvious. Not just "thin" but *curled up* therefore taking up lots of space. Oh, I'm told it's swarf, not shavings. That's for the pedants. When you watch Carl Jacobson's video of turning the resultant block of resin you'll see how the entire workshop ends up full of resin shavings from the same volume (contents of the bowl) and it's easy to see how the metal shavings can take up so much space and still have little to no actual volume of their own

@davidhawley1132 5 лет назад

If you know the density of aluminum (2.3g/cc) then you can figure out from its weight how much volume is really there.

@prescott231233 5 лет назад

Yeah if you melted that all down it would be tiny

@LemonRats 7 лет назад

"i made a murder bowl?!" I died

@Xenrelic 5 лет назад

You unwittingly made a Wilhelm Reich "orgone" accumulator. Most excellent.

@steadfasttherenowned2460 5 лет назад

That's great. I made my mom a clay ashtray in grade 1. I remember it vividly now that you reminded me about it. Haven't called up that memory in a couple decades.

@ace_of_cups4096 7 месяцев назад

6ys later, this is still the best resin video on YT 🤣

@jimmydiresta 7 лет назад

So cool!!

@peterbrownwastaken 7 лет назад

Thanks Jimmy!

@evangibeau4489 7 лет назад

The aluminum is paper think and in curls. This means that the resin would go into the "tubes" and hence the aluminum would in fact not take up very much space.

@enyor7780 7 лет назад

Okay, that was fantastic. I'm off to see Carl's results. Thanks for putting this together!

@yaboihenry1946 5 лет назад

1:33 Personally, that is the kind of commentary that really makes your videos fun to watch

@cga490 7 лет назад

I think the problem is that the water didn't reach the rim of the mold, and the resin did, not sure if it is enough of a difference but is a considerable one. Anyway thanks for your videos, I enjoy them a lot :)

@harvestkitty 7 лет назад

Carlos García Ávila I agree, he flexed the mold as well when he was measuring out the water.

@angrydragonslayer 7 лет назад

this

@easyeb70 7 лет назад

harvestkitty gg

@jakekimds 7 лет назад

To visualize why the volume of the aluminum was so small: go to the kitchen take out the aluminum foil. Note that there's like a 0.5 cm layer of foil on there. A very small amount. Then take the whole thing and loosely crumple it up. There should be enough to fill buckets.

@timmie1013 6 лет назад

Came to the comments to figure out why it held more than he thought. Found a bunch of people that don’t know what a fluid ounce is... was disappointed

@RylanStorm 6 лет назад

Timothy M in fairness the imperial system is a very bad system and very few countries still use it.

@Kyosumari 6 лет назад

As an American that wishes we used the metric system, I fucking agree. Imperial system makes no damn sense.

@tombskater3000 6 лет назад

GODDDAMN FUCKEN LIBTARDS

@chiefmawfackoogames 6 лет назад

I know right

@giuseppedragoni5543 6 лет назад

Timothy M 9

@artoo36 5 лет назад

So next time I need to fit more of something than is possible in a given space, I'll remember to add aluminum first. XD

@lulupops7347 7 лет назад

Glitter and resin!!!!!

@Mara-kw6uo 7 лет назад

The formula of density is mass divided by volume(p=m/v) so v=m/p. The density of water is 1 g/m and the density if resin is around 1,4 g/m. So as you can see to fill the same volume (v) în the equation v=m/p(water), v=m/p (resin) you need more mass(m) so you need more resin as a result.

@Mara-kw6uo 7 лет назад

I was too lazy to do the exact math as I'm used to the metric system.

@kalenthrasher 7 лет назад

how many ounces is the bowl? plus the 75 ozinside of the bowl

@roselover2525 7 лет назад

CAAARRLLL, there's a dead human in our house!

@vbgvbg1133 6 лет назад

OH! Hey how did he get here?

@matthewarvance3771 6 лет назад

My stomach got the grumblies.that only a pair of yummy hands would satisfy

@EtrnayDad 6 лет назад

I was upstairs, i was sitting in my room, i was reading a book and well this guy walked in so i went up to him and well i uhm stabbed him 37 times in the chest

@bluejayechaosenbybirb5865 6 лет назад

Et3rna11yD3ad CAAAARRRRRL that kills people!

@Bigfoot1955 5 лет назад

When he made his initial volume check with water he didn't fill the mold to the rim so his fluid ounce calculation was way off.

@ericzipf1332 5 лет назад

I saw that as well. That was the largest error.

@RedneckGaming162 5 лет назад

The mold was of the outside of the bowl thus needing more fluid

@PrismZet 4 года назад

@@RedneckGaming162 right, but that's what he measured, he didn't measure what the bowl held.

@booty_hunter4207 4 года назад

@@RedneckGaming162 yeah man we know, he didnt measure what the bowl held though so that's irrelevant

@graff5274 6 лет назад

Hes right.....Volume IS how much space is in the bowl. and that was hilarious. No matter how much you dump in you still cant see it. 20 gallons of reson later... lmao I woulda just reshot this one tho man, now you got a bunch of goofballs that think their smart tryin to give ya tips lol

@Tenchu003 5 лет назад

You mean "they're" are you smart ?

@MaryAnnNytowl 5 лет назад

@@Tenchu003 huh? Do YOU mean "you mean 'they're.' Are you smart?" Because that's not what you said, but it would be the only logical thing to say using the words you tried to use.

@Tenchu003 5 лет назад

@@MaryAnnNytowl I mean what I said. You're trying to make a point by using a quote and then leaving your point in the air.

@JD-pv1bp 7 лет назад

you should do some custom handles for your lathe tools. that would be awesome, each one could be made with different dip projects

@mackie_p 7 лет назад

Hahaha the math calculation cracked me up

@kaitlin5193 5 лет назад

"It's just a black hole" Had me rolling! Hahaha

@dreamblades 7 лет назад

Your little blue box is bigger on the inside

@ALegitimateYoutuber 7 лет назад

A neat simple project you could do is make a wooden war club. Because it would be just a neat thing to see made, also gives you a lot of options. Since you can just make a basic club or you can give it a cool look and add as many fine details as you'd like.

@kojiyoshiyama2608 7 лет назад

dip some origami creations

@Somnifex. 7 лет назад

Koji Yoshiyama yeah!

@surpriseraisin5892 7 лет назад

That could actually be quite interesting if it worked

@MaryAnnNytowl 5 лет назад

It would really depend on what the origami was made from. Perhaps some of the thin plastics could be heated enough to fold? Or a foil, be it aluminum or gold, would be safe and likely hold its shape better in the resin. Might be a great experiment!

@olive_loaf 4 года назад

I love when this pops up in my recommended every now and then and I just see the words murder bowl

@prahlad3953 7 лет назад

The suspense is killing me😁

@binarycortex 7 лет назад

The murder bowl is awesome, and the finished product is soooo gorgeous! Did you ever figure out the ACTUAL volume? Maybe using those pre-measured cups you use for resin, and pouring in known amounts of wate, it will be easier..

@isaiahconklin5942 7 лет назад

School made me make an ashtray once, but my mom doesn't smoke anymore so she uses it for spare change.

@ohmy6596 6 лет назад

Spooby wtf

@buttholesurfer2000 6 лет назад

Spooby fucking legend hahahahaha

@help_me_get_a_play_button 6 лет назад

Cool story, needs more dragons and shit

@ndrlfrd 5 лет назад

Lol the 75 ounces bit was so hilarious

@SirRasel 7 лет назад

I think the mold was expanding with the weight of the resin, I think you should build some wooden walls and clamp it to avoid that. Anyway was very satisfying to see how the resin disappears again, again and again

@edmundschwartzadder5360 7 лет назад

SirRasel this was my assessment as well.

@aushabock288 7 лет назад

You can see where the mold buldges around where the tape is that he put on to hold the plug in place

@MaryAnnNytowl 5 лет назад

No, no, no, and no - all of you are WRONG. LMAO, how can so many of you miss the obvious? Watch it again, and please pay a bit more attention. When he got the supposed 75 oz. measurement, he got it by *(almost)* filling the mold with water, after the bowl was removed! His biggest mistake was not filling the mold *all the way up* to the edge of the bowl's lip shape (in the mold).

@subbookkeeper 7 лет назад

I wonder what happens if you dip a strawberry or banana in rezin. Will it stay nice looking inside or turn into a rotten mush?

@piperbarlow1672 7 лет назад

subbookkeeper stay good. theres no oxygen or bacteria to break it down

@jstenoien 7 лет назад

Nope, enzymatic action would still cause it to break down. You could possibly blanch them to arrest that, but they'd probably still turn a nasty brown color from the UV exposure after a bit

@bimDe2024 6 лет назад

The stupidest thing I have ever seen in RU-vid. This was my previous comment before I watched the second part of the video. I can see this is one of the most amazing art piece I have ever seen. Thanks guys for sharing your talents