I successfully booted off a USB onto the Windows Install screen. Oddly, when I hit F12, its not under USB-HDD, but rather under "HardDrives". When I expand the menu option under HardDrives I have 3, under that Hard Drive Menu is USB-HDD0, I boot from that device, and it works fine.
+Poolarity I was told to boot from the USB I need to disable secure boot? How do I do this? I can't find the option? Also when I go to HardDrives my USB doesn't show up. Please help
+Spencer Abril The other alternative is to create a USB UEFI disk which is the more modern and preferred way if you can't find the BIOS settings to recognize legacy boot disk - look here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7IxUprqB2PM.html
+Poolarity i notice that you have configured your sata port as native ide, that's the reason why shows so many ide channels on standar cmos features, Change it to ahci mode on integrated peripherals for better performance.
I personally built many machines for people over the years using this board, or its previous iterations 76lm-s2h/68m etc, for earlier AMD chips. I've a few people who are still running these machines to this day. As such for a retro build I'm currently looking to pick one of these boards up on ebay :D
I respect your want to keep stability in your system. I guess another way to look at its overclocking popularity is the fact that people have found good stability even when pushed past stock, and as such someone running a stock system can feel even more comfort knowing that it's capable of much more stress. Great content will be watching more :D
It simulates IDE mode for SATA HDD thats why it shows master and slaves. And memory isn't mislabeled. As CPU has 2 channel memory controller it just showing you put it in DIMM slot related to second controller.
Oooohhh my gosh, I disabled my integrated graphics controller to try get my gpu to work. It didn’t and my screen was black, because of your video I was able to navigate through the bios, change and save it. Thanks
can you tell me wich rev. is this? and if the rev.6 have the unlock core feature? seems that the rev. 4.1 have the option to unlock cores, but the last rev.6 does not have, or i dont know, i was looking into the manual on gigabyte website here rev.4.1 download.gigabyte.us/FileList/Manual/mb_manual_ga-78lmt-usb3_v.4.1_e.pdf and here rev. 6.0 download.gigabyte.eu/FileList/Manual/mb_manual_ga-78lmt-usb3_v.6.0_e.pdf can you look in the bios if you find „Advaced Core Calibration”?
@@PoolarityChannel From the boot menu, can you pick your newly installed SSD (with Windows 10 OS cloned into it) and boot with Windows from there? I would imagine you'd need to access the BIOS Menu to permanently ensure that it boots from the SSD in the future rather than back to the 1TB Hard Drive
Dear Sir Please help me! I can't enter BIOS even after pressing DEL/F2/F8/F12/END KEY only it shows 'Prepare to Enter' after that "_" this Symbol keeps blinking on the Left Top Side. And I can't enter Windows also. I did every possible trick but nothing works. I did the RAM Changed, Processor Changed, PSU Changed, CMOS Battery Changed and also Reset the CMOS But nothing works, the CURSOR Still Blinks. So, what I will do! Please help me if anyone has the solution. Thank you
My sons computer says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I went through your video and under CASE OPEN yours says yes and mine says no. Mine also doesn’t show me under HARD DISK BOOT CH1, CH2 and CH3 are not there. It only says BOOTABLE ADDIN CARDS option. Also it says NONE under all the MASTER AND SLAVES.
When I push the power button of the motherboard it starts but doesn't show any signal In the monitor. I have been using the 4 slots of ram with 1333MHz. Any idea? Thanks.
thanks a lot man! but can u help me please... i enter the BIOS and go CMOS setup utility, it shows me only 4 IDE Channels; all of them [None], why it cant detect my HDD? and also i am thinking about to install a SSD, and i wanna clone my HDD to that SSD, and i heard i have to change the boot priority, so how does it works? would appreciate if u answer me :-)
How to avoid the first 20 seconds video which u have shown.. which display when I start my pc. is there any thing to update r to change settings in BIOS/CMOS. gigabyte 78lmt usb3, phenomll 560 CPU. 8gb corsair ram 120 ssd Kingston 2gb graphic card asus...
I brought this motherboard online should come today or tomorrow. So anyone who has used this atleast one year, can you tell me where there any issues? Also did you update the bios from gigabyte site for this motherboard or using it as it is from the box? My processor is fx-6300
This motherboard doesn't support, nor have, a TPM socket for the module, or any BIOS settings relating to that. There also isn't anything is relation to Secure Boot. I believe it's Legacy BIOS only.
@@harleysmith9201 Thank you for teh information on this and oh, thats a bommer ehh, thats what i was thinking as i had a look at my mothereboard and it seemed i didnt have the TPM slot, seems like windows 11 aint my way lol
My front fan stopped working and I cant figure out why. I got a new fan but still doesn't work. The connections for the front fan and 2 top fans don't work either.
my Amd Phenon 2 on Gigabyte 78LMTUSB3 R2 is powering on but no Display , even after new GPU initialy worked after a reboot after add hdd , it is not , any advice would be great . (Jumper resetting tried , battery removed and booted )
How can I get full screen? I connected the monitor through Hdmi cable even after setting the recommended resolution(1920 × 1080) there is 1inch black space on all the 4 sides. Is there any solution?
Hi, So I have this board and Im trying to install Win10 from usb but I always get the following error top code system pte misuse. I need to disable PTT but i cant find it, please help me!
i have the same mobo, and 2x4 g.skill ripjaw rams @ 1866mhz , but with the oc mode the ram only reach 1600mhz if i put 1866mhz on the bios it says an error and restore it to 1600mhz, i only modify the multiplier but not the voltage, did i need to up the voltage to get the 1866mhz? im scarry to screw my rams, but i want the ram faster because it might help the fx6300 and make less bottleneck in games (i dint have oc on the cpu, but because i dont have a custom cooler, when ive got one i will oc too), any recomendations for reaching 1866mhz?
Hey my computer won't detect my onboard graphics, and in the bio settings I can't see if it's on. In the igx config settings internal graphics mode is on UMA and everything else is in auto. But in my device manager it will only show my GTX card and not my integrated graphics. do you know why this is?
I have the same mobo and whenever i boot up my computer it locks up about 8-9 seconds after i boot the system. and when i say lock i mean it boots to the bios screen (im trying to install and OS) and i can only move my cursor down a few clicks before the pc freezes on the screen im at and wont allow me to move anymore. Please help?
I have 8gb installed but only 4gb is usable. BIOS recognize only 4gb. Which setting for RAM in BIOS i need to change for all 8 gb to be usable? Thanks.
I recently bought this mother board v 6.0 when i install all the components the fans and leds work but i get no video and no signal on the screen. Proccesor Amd fx 8320 3.5 ghz Evga geforce 960 sc 4g ddr5 video card Thermaltake tr2 600 w PS I read in a forum that probably is a Bios problem the compatible bios is the F1 but how can i install a bios with no screen? HELP ME PLEASE!!!
I'm actually having the same issue with this mother board. I had it plugged into the graphics card so that isn't the issue. Guillermo Fernández did you ever solve this problem?
Anyone know why my case fan speed is at 100% constantly (2250 rpm) sounds like a jet engine, but my cpu and gpu don't exceed 50 degrees Celsius at max load? smart fan is enabled but it is still 100% and I cant adjust it from the bios? also the case fan is connected to the MB 3 pin connector.
I have amd fx6100(6core)but 3 cores are using & 3 cores are still in sleep..I want to update bios to the latest version..will the problem will be solved?current bios version is F2
hey man i need ur help... when you install the processor on the motherboard did you have to update the bios to the latest version(because idk how to do that) in order for it to support the am3+ processor or its just plug and play and no bios update needed. P.S im asking because i noticed we have the same rev 6 board and same processor
I have gigabyte ga 78 lmt usb3 mobo. Can i install windows 10 via usb drive (flashed by selecting TARGET SYSTEM as GPT disk) and boot it in uefi mode? Does it support uefi boot feature? Or does it support the same after updating the bios? NEED SOME INFO ON THIS. APPRECIATE SM HELP!
Can this motherboard run two monitors with its Integrated ATI Radeon HD 3000? For example one monitor through HDMI and the other through the D-sub port. Both screens in extended mode, not clone.
No it can't. It only does vga & HDMI. As per the manual. Not sure if you can pull it off by placing a DVI to HDMI adapter. This way you're technically going HDMI & HDMI.
Hey dude just a question, I recently installed an SSD on my system and when I try to set the SATA mode to ACHCI the official software will still say that it wants me to turn ahci mode on? any ideas?
Are you using a PS/2 keyboard to get into the BIOS? I can't access my BIOS with this motherboard because I don't have a PS/2 keyboard and I can't get into BIOS to enable USB legacy support :P
my doubt about this MOBO is if two indentical memories installed on slots 1 and 3 (or 2 and 4) it runs automatically in dual channel or is it something i must set on bios? if someone could help me with this issue i d be very thankfull
In case anyone else sees this, I dont think you can disable secure boot. Not that I've been able to see. I had the same issue and fir me it ended up being that by usb was plugged into a USB3 port. The issue was resolved when I plugged it into a USB2 port
Hey great video! I have a question. You were saying how the sata drive numbers on the motherboard don't match the CMOS labeling. I'm a first time pc builder so I don't know much. Does it mater which sata port I plug my ssd into and my CD drive into? Is there a recommended port to plug them into or will they all work the same way regardless of where I plug them in? Thanks!
The screen you had in the very beginning is like almost a flash for me. whenever I try to press delete it doesn't work. everything is plugged in right. how do I access bios?
The screen in the beginning is always a flash, before you boot, you have to keep tapping DEL until you get into the BIOS. If you are using another motherboard it may be F12, F2, F8, but nearly all the time its DEL
Are you using the same motherboard? Does your computer have a particular Keyboard Port it must use, such as a PS1 keyboard or the 2 USB inputs that are outside of the other groupings. I've seen that also. If you press Pause does it stop booting, if not its likely your Keyboard is not registering on Boot.
Question: so when i go to over clock my amd fx 8300 8 core processor, i go to the volatges, like the last two voltages, i cant mess with them becuase they dont go highlighted is there a way to fix that or is that how it's supposed to be?
wow. how did you pause it at beginning? I can get to that screen but I cannot get into BIOS no matter what I do. f12, del, end f8 nothing works. I have gone on to try every key and nothing. I can get to this screen if I hit delete fast several times but then nothing. other times I can hit tab fast and it will pause it for a second or 2 but then gone. Thanks
Hi! I have this mobo and tried setting it up with a SC EVGA Geforce 1060 but the mobo doesn't recognize it. It doesn't show up in the device manager or anything. Do you have any Idea of what might be going on?
Hi, I bought this board with the fx 6300 and the cpu fan idles between 2500 and 3000 rpm (yours is too at 7:15). Is that normal because its quite loud??
+M. Kassis Yes its very loud, I need to fork over some money to get a better Fan, but I will have to put up with the noise for now. The Stock Fan's are always pieces of junk that are just too loud, my FX8350 is worst, like a Wind Tunnel, I wish I was exaggerating.
Hi, How do you enable dual channel ? When i put 8Go of memory (kit of 2x4Go) the system only recognizes 4Go. I have tried every positions on the memory spot (1-2 / 4-3 / 1-3 /4-2) and no one works.. Any solution ? :/
Brother i m not able to Enable the virtualization in advanced bios settings plz help me/ Processor AMD FX(tm)-4100 Quad-Core Processor, 3600 Mhz, 2 Core(s), 4 Logical Processor(s)
Hey man please help me I'm not able to enter my boot menu I have mechanical keyboard i just keep pressing the DEL button but it's not entering the boot menu
i have this motherboard and cannot get into the bios, when i hit f12 the only thing it lets me choose is the initial startup disk. i just got a ssd and am trying to boot from it but am having enormous difficulty. when i boot with ssd it tries to boot with pxe lan booting. i desperately need to get into my bios and cannot figure it out
Well you hit DEL key for bios..not f12 soo...also you can't boot from an empty new SSD..what is on it to boot? So it hits the SSD and since there is nothing on it, it goes to LAN boot. You have to boot from your windows cd or a special windows usb stick you've made.
dpla9752 I had an FX for a while w/this exact Mb. The build quality was good and board is heatsinked so an fx 8 core is fine in it, just make sure you have good air in your case. 8370e worked fine up to 4.2ghz and 4ghz stock volt, with 1900mhz DDR3 and Arctic Freezer 13 CO with NB HT at 2400-2500. but be careful to not bend fan header on cpu as all fans stopped working when I did that.
How did you get to this point? I have same mobo with amd3+6300, 8 GB of ram and an ssd I don't have a Windows install disk. Will I not be able to get to bios without a windows disk? And is there a way I can get a demo of Windows and put it on a thumb drive?
Hi I my fx6300 overclocked to 4.3ghz and it runs perfectly stable. But when I do a cold reboot i get a boot failure due to overclocking message. Any ideas what might be causing this?
David McClure Hi, I know that it's been 2 months, but have you fixed that issue? I'm getting the same message and in order to remove it, I have to set everything to auto. I've been looking for solutions but none of them seem to work.
hey man, i've tried 3 diferent keyboards and none of the work the delete, end, f12 keys when i try entering bios. also tried all usb ports on the board
According to the Manual I have posted in the Description area, the DELETE key enters the BIOS. When you boot up, keep on tapping it at a high rate of speed like 8 times per second to make sure you catch it on Boot Up.
depends what operating system you have win10 and i think win 8 dont have safe modes press start type msconfig and change it also remember to change it back when you get it sorted
Hey, I'm having a problem installing an OS from usb (Win 8) on the same system as this. I've tried booting from every f12 option, yet keep getting "Disk boot failure" message. Any ideas on how to resolve this?
i have the same motherboard, can you please tell me, why is it when i plug in hdmi, my tv says no signal, only my graphics card hdmi works which is where i have my monitor plugged in, but i want dual monitors, so i plug my tv into motherboards hdmi and no signal... help please.
Start with just one monitor to get your computer going, and plug into the HDMI on your graphics card on on your motherboard, since you motherboard doesn't have anything on it other than these POST and BIOS options.
Start with just one monitor to get your computer going, and plug into the HDMI on your graphics card on on your motherboard, since you motherboard doesn't have anything on it other than these POST and BIOS options.
+Ghost I some instances, when you put in another Video Card, the onboard is disabled. Did you check the BIOS to see if you can have one as primary and one as secondary for the Video. 3:15 see if the BIOS has changed since you put the video card in, if there are different options.
already did it, it was bios settings, thank you for responding either way, the resolution is a bit shitty on tv and quality even tho its 1920 and 1080p, i guess tv is just too big (47inch)
Whenever I boot I get the error {DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER} I assume this is a problem with the Hard drive. I have fiddled with the Hard drive, messing with its SATA cables on the mobo and Channels in the bios and I have had no luck. Anyone know how to fix this issue?
No I have figured out that the problem is my PC won't read the USB that I am trying to install windows 10 from. So atm I am reformatting it and seeing what works.
I figured out the problem a while ago, long and short of it is that the Mac I was downloading the windows OS from had its bootcamp thing corrupted. I borrowed someone else's windows PC downloaded the OS and booted it on my computer. Thanks for your help tho
Hey guys I got this motherboard and the AMD FX 3600 but can get a signal on the monitor. I've tried what feels like everything but to no avail. Has anyone else bumped into this or does anyone have suggestions on what might work to get to the BIOS screen? Thanks!
Sooo what F key do I use to get into my bios? I have this very same board. I want to update the ram speed on the mobo to match the speed of my new ram from 1333 to 1600.
how to install 64bit win 7 with this mobo?? I'm using AMD FX 6300, corsair vs 550, kingston hyper fury x*3 4gb 1600 mhz, gtx 960 and cooler master hyper 103.. by the way I'm using a pirated copy of windows... plz help.. I can only install 32 bit os.
Biswajit Roy you probably fixed this already, but just get a USB and download Windows 10 on it, because there's a option to input a key whenever the hell you want to. Whenever you download pirated software it's usually set to 32bit for all the 32 bit users so that's why you may get that problem so try the USB instead.
