Gigabyte RX580 Thermal pad replacement.

Подписаться 4,9 тыс.

Просмотров 25 тыс.

50% 1

Results after testing - temperature went about 25 degree down, when testing with HeavenBenchmark.
Link for the thermal pads. I use 0.5mm for the memory chips and 1mm for vrms.
www.amazon.com/Grizzly-moins-...
Discord - invite.itjungle.eu
If you have any questions, regarding Laptop repair and etc. you can join and ask for help.
Like and subscribe if you like the video.
More videos: / @laptopdisassembly
Tools i use the most:
1. Blade - www.aliexpress.com/item/40010...
2. Screwdrivers - www.aliexpress.com/item/Free-...
3. Thermal paste - Arctic MX-2

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@LaptopDisassembly Год назад

Discord - invite.itjungle.eu If you have any questions, regarding Laptop repair and etc. you can join and ask for help.

@HoTuanDat Год назад

Mình cần bao nhiêu loại 0.5mm và bảo nhiêu loại 1.0 mm vậy bạn

@diegoarmandoortizdiaz5763 Год назад

one doubt, with a thermal pad of 80x40 will be enough to cover both parts of the VRM?

@LaptopDisassembly Год назад

Should be fine, just mark where you will cut it and check will it be enough.

@pavlovskyyp8799 2 года назад

Im using this card for gaming for over 3 years, but the temps on card and cpu still stay low. That means i dont have to change anything right?

@LaptopDisassembly 2 года назад

Yes, but is always better to refresh the thermal paste.

@MRshrir1985 2 года назад

What thickness are the thermal pads on the vram ?

@Jeanpaisa89 2 месяца назад

Bro 1mm

@IonutRaiciu 8 месяцев назад

Hello, for the rx 580 8gb xfx, which thermal pads should I use? What dimensions? Thanks

@LaptopDisassembly 8 месяцев назад

According to google, 1mm and around VRMs 1.5mm pbs-prod.linustechtips.com/monthly_2021_09/image.png.3a6209288ffd1df078b29b45e1075654.png

@arisu4902 Год назад

If I were to use 1mm thick pads for both the vrms and memory chips, would it still work?

@LaptopDisassembly Год назад

I doubt. The gap on the thinner ones will become bigger so it is not a good idea.

@konspirasiglobal6164 2 года назад

wait wait., this gpu using more than one thermal pad with different sizes?

@karol_pl526 2 года назад

My plastic shroud has been broke. Do you know how to fix that or which shroud from another card will be good for this aorus?

@LaptopDisassembly 2 года назад

Can't understand what you are asking. Which part is broken. Also plastic can be glued.

@karol_pl526 2 года назад

@@LaptopDisassembly that plastic shell for fans. The place where fan is mounted to that plastic shelter in my case is flake off in big part. I would use 2 pc fans on a zip tie but I would avoid this. The part from 00:02 from Your video, that place for fan holding.

@user-zk9jj1pq6x 2 года назад

I have the same problem , I put everywhere 1mm ,everythings works and gpu but on test stress pc shot down, i heard on VRM is 1.5mm and VRAM 0.5mm .. I have rx570 4gb gigabyte..Im scared bro dunno what to do cant find right answer

@LaptopDisassembly 2 года назад

If you put 1.5 on vrm you will lift the whole cooler up. Use a 0.5 on all and test, but use a good ones.

@SquidNgzz 2 года назад

Is the rev2.0 thermal pads the same height?

@LaptopDisassembly 2 года назад

Really don't know... I suppose the cooling is the same.

@Sarcoma1 2 года назад

is it 1.5 mm or 2.0 mm thickens of taht thermal , look like 2 mm but you said 1.5 i wnat to change it so i wanted to order them i want to be sure....

@LaptopDisassembly 2 года назад

1.5mm are the new ones.

@Sarcoma1 2 года назад

@@LaptopDisassembly i mean old one is 2 right?

@LaptopDisassembly 2 года назад

On that one they were wrong replaced. Originally they should be 1.5mm

@DordeKaurinovic 2 года назад

Thanks. All pads are 0,5mm? I'm using this cards for mining eth for about 2 years. Do I need to change this pads?

@LaptopDisassembly 2 года назад

i usually don't replace them, only thermal paste. But this one, someone has replace them with thicker ones and t become worst... so i just replace them with proper ones and is working fine now.

@DordeKaurinovic 2 года назад

@@LaptopDisassembly Thanks

@timaghiar 2 года назад

For mining the pads warp and lose their elastic. This can mean worse connection to the heatsink, I would recommend to replace them if mining. 12mk or better thermal pads.

@DordeKaurinovic 2 года назад

@@timaghiar thanks tim

@diegoarmandoortizdiaz4054 Год назад

my VRAMs use 0.5 pads, but my VRMs use 1.0 and it would be quite expensive to buy both, will there be problems if I use 0.5 in both?

@LaptopDisassembly Год назад

They are different because the high of the VDM and memory is different. If you use same size for both, one of them will not have a proper cooling because the gap will be bigger.

@saucysuishi341 Год назад

Double the pads. A kit should come enought. Use two strips

@SrPivete13 Год назад

i have RX570 Gigabyte Gaming Rev 1.1 with Gigabyte and Fan Stop RGB Lights,but i bought yesterday 1.5mm Thermal pads for VRM,it's worng or not?

@LaptopDisassembly Год назад

Every card uses different thickness of the pads.If you use 1.5mm for the vrms, than you should use 1mm for the memory, otherwise there will be a gap, and the cooling will get worse.

@SrPivete13 Год назад

@@LaptopDisassembly ok man,but i only find indo about 0.5mm Vram and 1.5mm vrm in many websites and fóruns.,.

@dkid1574 2 года назад

how did the temperature go after this?

@LaptopDisassembly 2 года назад

the temps went down with about 20 degree but the card was with the wrong pads before.

@vernehetzel5411 2 года назад

Hi. I have sapphire nitro + rx 580 4gb, and can you tell me what size, thickness of thermopads do i need? Thanks.

@LaptopDisassembly 2 года назад

Well usually the different manufacturers put different size pads, according to the board revision. Most of them are 1mm, but you need to check by your particular model.

@vernehetzel5411 2 года назад

@@LaptopDisassembly Thank you. But i can't find information about my gpu. I just watched many youtube chanels and on google too. Everybody say different things, so i don't even know wich one to choose. From 1 mm to 3 mm. I think maybe 1.5 will be fine.

@LaptopDisassembly 2 года назад

@@vernehetzel5411 3mm is way more. Don't go above 1.2mm.

@vernehetzel5411 2 года назад

@@LaptopDisassembly ok. Thanks.

@razmanrhoads2078 Год назад

I'll use 0.5mm on both vram and vrms chips.. by grizzly pad 8..

@Finnyboyyyyy 11 месяцев назад

I have the Same card and mine is constantly overheating What should i do?

@LaptopDisassembly 11 месяцев назад

Did you replace the thermal paste. Also replace the thermal pads with good ones.. thermal grizzly or similar

@Saywhatohno 2 года назад

Amazing video!!! Have you tried copper shims instead of thermal pads for mining? Apparently it works amazing but i am wondering if you have tried it or if you know anyone who has tried it

@LaptopDisassembly 2 года назад

I use them often on laptop GPU. Just apply small amount of paste on both sides ot the pads and put the cooler. You need to have paste between every layer.

@Saywhatohno 2 года назад

@@LaptopDisassembly you mean on the copper shins right? Or you haven’t used copper shins?

@LaptopDisassembly 2 года назад

Yes I have use them... They increase cooling performance. But you have to be careful with the thickness. The normal pads can be flatten a bit by the cooler, while the copper ones no, so just be careful with the thickness.

@Saywhatohno 2 года назад

@@LaptopDisassembly would you prefer 0.5 mm on sapphire rx580?

@LaptopDisassembly 2 года назад

Well you have to try, 0.5 or 0.7-0.8. you have to check the gap and do the cooler laying ok on the vrms...

@kravenaaa1986 Год назад

May I ask hm thermal pads did you use for this gpu?

@LaptopDisassembly Год назад

Link for the thermal pads. I use 0.5mm for the memory chips and 1mm for vrms. On the GPU i put paste

@kravenaaa1986 Год назад

But is it okay if I use 0.5 mm on both memory chips and vrms?

@LaptopDisassembly Год назад

Not a good idea

@kravenaaa1986 Год назад

@@LaptopDisassembly Why tho? What would be the problem?

@LaptopDisassembly Год назад

If you use 0.5 instead of 1mm the cooler will not lay on the vrms ant there will be a small gap.

@elbolad1245 2 года назад

excellent video, excuse me, what size in mm are the thermal pads?, I have an rx580 gigabyte

@LaptopDisassembly 2 года назад

I did use 1mm

@carlosacosta8835 2 года назад

0.5 mm

@bngh12ful 2 года назад

Heed help, Xfx rx 580, no boot, has 3 beeps 1 long 2 short, resistance ok 0.6 omh gpu 22omh memory, when used with 2nd card shows error 43 and recognized as rx 590, its dual bios, gpu starts getting hot, with these days prices i need it to work, anyone knows software which can show specific vram chip fault?

@LaptopDisassembly 2 года назад

Error 43 usually means faulty bios. Try to flash with ati flash tool and download the proper bios.

@bngh12ful 2 года назад

Card is not detected, cant save old bios, gpuz says 0 where bios frame is, it has got all the voltages and gpu starts?

@LaptopDisassembly 2 года назад

tell me the exact model, written on the back of the card.

@bngh12ful 2 года назад

@@LaptopDisassembly rx-580p45d, rx - 580p45ddt v 8.0 Gts xxx ed rx 580 4gb oc+ 1386m d5 bp

@bngh12ful 2 года назад

@@LaptopDisassembly voltage on gpu selenoid is the same as vram 0.9v, but rsistance is 20omh, gpu 0.6 omh, voltage on memory controller is 1.5v, thanks for your replies

@LuiFernando-fi3om 11 месяцев назад

its 1.0mm or 0.5mm????? for vram

@LaptopDisassembly 11 месяцев назад

It is written in the description... 1mm for vrm and 0.5 for memory

@anything-inferno4541 2 года назад

I have rx570 8gb what thermal pad thickness is best?

@LaptopDisassembly 2 года назад

All depend, because the different cooling use different thickness. But usually 1mm is fine.

@juniordeolinda Год назад

To clean the graphics chip, you could have used a soft toothbrush instead of using a cotton swab, when it opens there is a plate where the graphics chip is, you have to open it, not removing the screws at once, unscrew them in X and at the end you will hear a popping sound, this popping and there is pressure from the PCB being released correctly, this prevents you from cracking the DAI of the graphics chip, in the assembly and there is the same thing, put the screws and then tighten it making an X, that and for any video card !!

@LaptopDisassembly Год назад

If I use a toothbrush it makes a bigger mess. About the screws I tide them on X but not at max... Usually 50% and after I put all I repeat and tide max. For about 15 years I haven't god a cracked dai. Bit thanks for the tips