Godox X1T Control Guide with Custom Functions (Flashpoint R2 Flash Transmitter) (Pixapro ST III)

Подписаться 95 тыс.

Просмотров 321 тыс.

50% 1

My entire kit of gear : kit.co/robhallphoto
Where I get Music and Effects: share.epidemicsound.com/tw3LG
Follow me on Instagram: bit.ly/2sj7Lsq
X1T Trigger : bit.ly/GodoxX1T
If this looks familiar thats because it was a portion of the Godox and Fuji video. I wanted a dedicated upload for people looking for this instruction!
The Flashpoint x1-N is the ultimate radio transmitter for Nikon DSLRs that speaks to Flashpoint AD360ii, GodoxLi-on and Godox and Nikon Radio Remote without missing a beat and connects to all strobes with sync ports. The incredible range of these compact and lightweight units as well as their integrated functions and features make them the first choice of professional photographers. The proprietary TTL and HSS enabled 2.4GHz x1 Radio Remote System radio triggers transmits atop a Nikon body with the essential TTL pass-through and laser AF assist and works with the complete family of Flashpoint Speedlights, Monolights and Strobe lights with x1 TTL radio transceiver built right in.
All the x1 enabled family communicate seamlessly: the lithium powered Godox Li-on Nikon, Canon and Sony TTL speedlights, the Godox M alkaline energized speedlight, the fantastic AD360ii 360 Nikon and Canon TTL powerhouse, and the masterful 600ws AD600 monolights. Older Flashpoint flashes can be fired and controlled off camera while being attached to the x1 Radio Remote Receiver FPRRx1RN to grace remote link to earlier models.
The x1-N provides a full proprietary GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off and most importantly, TTL and Manual Groups can be conveniently mixed together as needed.The battery powered units provide TTL, HSS (High Speed Sync) and even a HSS pre-sync timing adjustment for precision synchronization. PC cord sync input andoutput ports are provided for external device remote sync without automation. x1-N receivers are compatible with Nikon CLS system speedlights like the Nikon SB-910, SB-900, or SB700. Controlling the remote strobes is straightforward, with a large clear LCD panel interface aside 3 separate buttons relating to channel, groups and modes, while a thumb wheel provides fast scroll adjustment for the selected function. A simple switch located on the side of the transmitter allows the laser pattern Focus Assist Light to be switched on and off when needed.
x1T CUSTOM FUNCTIONS
The x1 Experience/Advantage
The x1 TTL Wireless Flash System is the advanced 2.4GHz radio remote that adds camera TTL dedicated custom functions to your multi flash experience. Easy to use buttons command a full range of functions like reliable channel triggering, group mode selectivity, HSS, all with powerful signal strength and exceptional stability to your selected camera flash language. LED panels clearly display the status of all remotely linked x1 compliant strobes so you always have control of group lighting mastery. x1 wireless communication gives speed of light response to on camera or off camera x1Family devices for a spectacular advantage on the shoot in any environment.
The proprietary TTL and HSS enabled 2.4GHz x1 Radio Remote System transmits atop a modern DSLR body with reliable TTL and pass-through to speedlights, plus laser AF assist.x1 transmitters work with the complete family of Flashpoint Godox Speedlights, AD600 Monolights and AD360ii Strobes with x1 TTL radio transceivers built right in. Add a x1 receiver to any legacy flash with a sync port and it too becomes part of the x1 Family! The incredible range of these compact and lightweight units as well as their integrated functions and features make them the first choice of professional photographers.
All the x1 Family enabled gear communicates seamlessly: the Lithium powered Godox Li-on Canon, Nikon and Sony TTL speedlights, the Godox AA alkaline powered speedlight, the fantastic AD360ii 360 Canon and Nikon TTL powerhouses, and the portable 600ws AD600 series monolights. Other strobes can be fired and controlled off camera while being attached to the x1 Radio Remote Receiver to remote link to earlier models.
All the x1 enabled units communicate seamlessly: the lithium powered Godox Li-on and AA powered Godox speedlights, the AD360ii 360 barebulb strobes, and the portable 600ws AD600 monolights - now all available in Nikon, Canon and Sony TTL as well as Manual models, with more proprietary camera versions on the way. Other strobes can be fired simultaneously by being attached to the x1 Radio Remote Receiver, and older R1 AD360ii and Godox Li-on units can be controlled and triggered using the bridge Receivers for Non-x1 AD360iis/Godox Li-ons.
One Remote to Rule Them All.
One Radio Remote System to Unify the Flash.
One Remote to Streak, Godox V860ii and AD600.
x1 Flash Imaging Freedom
Radio Active. TTL Auto. HSS Master..

Опубликовано:

9 сен 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 317

@finebrian2247 6 лет назад

Can you control the X1T-C in camera like with the yongnuo transmitters?

@robhallphoto 6 лет назад

I'm unsure, i'm pinning your comment in the hopes that a Canon user that can answer it for you.

@finebrian2247 6 лет назад

thanks

6 лет назад

Yes you can, just go into the camera flash menu and make the settings.

@jagannathan7787 3 года назад

@@robhallphoto hi how could we set an id in XIT transmeter from canon 600ex-rt speedlight .

@1EagleDave 6 месяцев назад

@@robhallphoto yes forsure

@srizwan747 6 лет назад

THANK YOU SOOOO!!!! MUCH I cannot thank you enough for covering modeling light turn on/off that I have been wondering to figure out for so long.

@robbinsdrones Год назад

5 years later - still a very helpful video, thank you! 📸

@jamesmills9651 6 лет назад

Thank you for making this video I've been waiting for somebody to do this for a long time

@mrscillalatte 6 лет назад

This video is LIFE I needed this. Thanks for making it happen!

@fototyz 3 года назад

This is the best review of the X1T I have watched.......... now I understand how to use it!! Brilliant! :)

@hibhaven 6 лет назад

Thank you. Exactly the type of explanation I was looking for about the Godox X1TC

@crismonroe24 6 лет назад

this is a very helpful guide Robert, thanks for spending time to make this video tutorial. Keep it up bro

@ryanlucas861 4 года назад

Thanks a bunch for this video. Really simple, and still helping people!

@thomasmosley9162 5 лет назад

Thank god for Robert Hall 🙏🏾LoL. I was having the hardest time with this trigger.

@thepixelpoet 3 года назад

100% pure knowledge, No bullshit. Thank You.

@careylee5951 5 лет назад

Thank you! This is exactly what I was looking for!

@PhotoKenji 6 лет назад

Amazing!! Thanks for this detailed instructions!!

@AerialLensVideo 5 лет назад

VERY helpful - THANKS! I was completely confused (and pretty frustrated) until watching your video. Successfully got a TT685 and a TT600 to finally work as desired. Yay! The little manual with the trigger was not so clear (being nice about that). I am not real clear about getting HSS to work properly with those two triggered flashes, but this is a great start.

@ImaginetMedia 4 года назад

Excellent information. Exactly what I was searching for.

@GoneDogging 3 года назад

Thank you so much for this video. I spent hours trung to understand why the unit would not allow change of mode, would you believe. Your 'factory defaults' instruction restored both normality and sanity.

@vasudevdesai1412 4 года назад

Very helpful tutorial. I was searching for the second curtain sync function 👍👍👍

@duncanfox8475 6 лет назад

Hi Robert, there is one power-on mode that you didn't cover. If you hold the test button down while you turn the trigger on, the status LED blinks twice and will allow you to control and trigger units very close to the transmitter. It puts it in a low-power mode that may reduce the maximum range of transmission, but removes the minimum range limitation.

@reinervenegas875 5 лет назад

Thank you so much! I have a few Contax and Yashica film cameras and lenses and been wanting to use flash for my film shots. The Fn 01 single pin mode was the answer, will be doing manual metering and this is such a great thing to know, I won't have to tether with a Sync Cord!

@hholbe 6 лет назад

Great video!!! This helped out so much!

@stelioskritikakis 3 года назад

man you're a life saver... i had a strange behavior, when i turned on the x1t, my godox ad200 turned on the pilot-leds. after reseting the x1t, everything went back to normal

@ottoferdinands 9 дней назад

Thank you. Very clear video from one point to another.

@sherkhan-up2vc 4 года назад

That is the content i wanted to watch. And to reach there i have watched like 20 more delusional videos. Thanks Budd

@vincentmediatv 4 года назад

A bit late to get an ad200 but this is by far the most helpful video...thanks a lot Robert.

@billzidis2656 6 лет назад

I loved the video ! Very useful!

@AerialLensVideo 6 лет назад

This is a Godsend - THANK YOU! I am amazed and that Godox does not include any sort of printed instructions for something so non-intuitive and complex. How on Earth did you figure all this out??? Thank you so much!

@steelawesome716 6 лет назад

www.godox.com/EN/Download.html

@AerialLensVideo 6 лет назад

Thank you. That link does not seem to work on Chrome, Firefox , or Safari. So, I will try again later.

@andrewpolitano 5 лет назад

I mean, instructions DO come in the box when you purchase one as well..

@steves8860 4 года назад

@@andrewpolitano not mine. i got a used one!

@DeletedDelusion 6 лет назад

Thank you, that is some great guide how to use that trigger.

@LoboOutdoor 6 лет назад

THANKS! By default I couldn't use the scroll wheel to change groups. Now i can.

@cielitolindo8303 6 лет назад

you're the best!

@carlthegnarl 6 лет назад

Oh the little things! Didn't know about the "long press Gr button to modify all active groups at once" feature. Thanks man!

@godsinbox 4 года назад

Ive watched this 5 times and missed that feature, thanks for the tip!

@69_MK 6 лет назад

Mate, I needed this video. This transmitter got me confused AF.

@stephansmokov4952 2 года назад

Thanks a lçt! You helped me with custom fn 5 for using Godox QT600III at min power 1/256

@lordbilal2012 4 года назад

thanks a life saver huge respect man

@kirtg1 4 года назад

Thanks. Very helpful video

@puseletsomasemola282 5 лет назад

Awesome video. How do you set the "auto mode" so that the tt600 flash adjusts the zoom automatically

@CartubeCoIl 6 лет назад

Excellent, thanks.

@timnguyen4494 5 лет назад

Thanls for the tutorial. My Flashpoint r2 receiver goes idle every time I leave it for awhile without shooting and it wouldnt flash flashlight so I have to run to it amd turn off and on all night. How do I stop this from idling?

@steveshepard9430 2 месяца назад

Very informative. Thx!

@ryanphotostudio 5 лет назад

Thank you! very useful

@ternielstvalle 3 года назад

excellent tutorial

@EquestrianSport 5 лет назад

Hey great review. I have been trying to figure out if it's possible to trigger the shutter with the x1T-O (I have a Panasonic with the x pro on top in the shoe) I saw a vid where they said it was possible using the x1t as a remote wireless trigger for the shutter. any thoughts on that?

@rohanshinde189 5 лет назад

This helped thanks!

@AnkitSharma-pc5gp Год назад

This was very helpful. Thanku

@manoharmgr8235 3 года назад

வீடியோ மிகவும் பயனுள்ளதாக இருந்தது மிக்க நன்றி இரா.மனோகர் சென்னை . Very useful This video sir, , big thank you sir R.MANOHAR ,Chennai.India

@davidromischen4438 3 года назад

Many thanks for the tour, congratulations on the clarity of the guide ... I would like to ask a question, and recently that I own X1 transmitter trigger for Nikon with its receiver! It works well I'm happy but I don't understand why if I attach a flash on the transmitter shoe X1, the flash attached to the transmitter does not work, the transmitter X1 triggers the flash attached to the receiver, but does not trigger the flash attached to the transmitter that is attached at Nikon, I don't understand where I'm wrong and ask for help to use the second flash attached to the X1 ... Thanks and sorry my bad English

@saleshobsenz6225 3 года назад

Very helpful thank you sir

@lanujang 5 лет назад

thank YOU bro!

@nairbyad7188 4 года назад

just received my transmitter and two receivers which work perfectly with my SB-900's. thanks for the lesson as Godox's instructions should've been proofed by someone who has English as their first language!

@derekmack 6 лет назад

Custom function 04 is for stroboscopic mode. The T is for time and H is for hertz. You might want 10 flashes (H) at 2 (T) per second. You might have a moving subject but also want a longer exposure, so 10 flashes in 2 seconds on a 2 second exposure. It's more for creativity than practical uses. You need a really low power output as well, full power would never recycle fast enough

@thisblackgenius 4 года назад

Thank you sooooo much!

@sancho316 6 лет назад

Wow thanks so much

@darkdevil922 6 лет назад

Thanks a lot bro

@frnckjssld 4 года назад

Hi Robert ! thanks for the tips, very useful. I'm just crazy about to put off the "standby mode". Is it possible ? It's turning off (or standby) if I don't touch it for few moment, very unconfortable.

@Patricia-qd6fb 2 года назад

Hello Rob, Thank you for the instructional video. I have the channel, etc. all set, but for some reason, when I adjust the power from my strobe, it will not sync/communicate that adjustment with my Godox X1. It used to, but now no. I can only adjust from the Godox X1 and it communicates with my strobe. Can you help with this?

@abahdidan4024 3 года назад

Thank you very much

@avisasson9500 6 лет назад

thank you!

@JyotirmoyHajra 6 лет назад

Too good!

@allabouthim03 5 лет назад

How do you use function 3 with the Godox Sk300 II? More specifically I want to use a sync cable to try to avoid any misfires during a graduation ceremony. I've heard wifi signals can be an issue sometimes and I can't take that chance. I know I need to set function 3 to OU/out but when I do the wireless function on the transmitter and Sk300 still seems to be active. How do I know that it is operating via the sync cable?

@nikoguy 2 года назад

Excellent thank you

@paulobiscocho9042 3 года назад

Thank you!

@StefanosTsakiris 6 лет назад

Hello. Thank you for the video. A quick question, what is the purpose of the extra hot shoe, on top of the devise ? Is it active all the time, regardless of the mode and settings you use? Thank you.

@robhallphoto 6 лет назад

+Stefanos Tsakiris when you put a flash on top you get an extra group to work with. If you aren't fully adopted in the Godox system you can put another speedlite on top of your camera. That's pretty much it!

@StefanosTsakiris 6 лет назад

Thank you.

@harrygilliland5675 6 лет назад

Thanks I was trying to get the HSS symbol to appear on X1c transmitter.

@ayhancapan 5 лет назад

Instead of this trigger can i have a godox tt685s as a trigger? Will it work as efficient as this trigger. Thank you in advance...

@RahuldeCunha 6 лет назад

Thank you :)

@alexneo100 5 лет назад

Thanks!!!

@C4rt3Bl4nch3 5 лет назад

Can I use this transmitter for godox version flashes (r2 zoom mini) since its basically the same besides branding? I'm having trouble connecting thinking they would be compatible.

@edwardnixon1782 4 года назад

I'm using a gh5 with the x1t-o and/or the tt685-o. But I have 2 nikon compatible speedlights -- sb28, Metz -- and a Cactus first gen manual. I've given up on the idea of doing cross brand ttl from the 'o' devices but I hold out hope I might be able to do output controlled manual to either the sb or metz or cactus speedlights. So the question is: is there a receiver, presumably Godox, that will let me manage power level on these legacy flashes from my Godox devices. I'm happy to follow links or search down through comments if this is an old question. Your work on the Godox line in among the best, most articulate and professional I've found. Thanks for that.

@ganesanpazhaniyappan5323 5 лет назад

Hi... Thanks for the video... I am using Nikon d3400. I switched on af assist switch as well as turned the mode "on" in custom function settings. In camera, I selected af single servo and single point focus. But af assistance in x1t is not working? Any idea? Thanks in advance

@ch-oy9fj 4 года назад

Hi, I was wondering if the X1T would work with Elinchrom flashes? I just received some flashes and I'm looking for a good trigger. Just not sure they would work together. Thanks you for the great explanation in the video.

@robhallphoto 4 года назад

Godox X1-T only triggers Godox (and Godox rebrands) natively. Not anything else. You could connect an X1R receiver to the elinchroms sync port but you will not get remote control

@DistinctivePortraits 6 лет назад

Hello Robert, I'm looking to control off camera flashes, AD600 & TT600's while triggering an QFlash on camera bracket through PC synch, however I changed the custom function 3 to "PC Out" and it still wouldn't fire the QFlash with the off camera flashes, Any ideas?

@MegaRay68 5 лет назад

My X1 sleeps and I have to press GR button to wake it up. Appreciate if you let me know how to keep it on all the time. Its really a pain to see it sleeping and the flashes don't fire.

@mamin83 5 лет назад

Can I use my Godox X1T (mounted on my Nikon body) to trigger shanny SN910EX-RF (wirelessly), since both can operate at 2.4 GHz frequency.

@Cadudesiqueira1 5 лет назад

What is fn10 and fn11 on the version 3 update? Great video, by the way!! It helps a lot.

@billielynnross9771 3 года назад

FN11 is for setting user ID FN10 is for use with an APP. I can't find any information on how to connect and use it with the app.

@am75040 3 года назад

Thank you so much Rob, so to enable HHS you do it at the strobe itself?

@robhallphoto 3 года назад

Nope. X1-T will automatically enter HSS when you have it enabled in camera, and go beyond your cameras max sync speed.

@Bgvolley 5 лет назад

Hello i have A6000 and a Godox flash that has a hotshoe that is specific for this camera and some more Sony... I want to use one more speedflash cheap one that will be not working on the camera, but can this transmitter fire other flashesh for other cameras ?

@rolandgomes88 4 года назад

Hi Robert, Hello sir, i had query regarding the godox x1N reciever with a Nikon sb910. I have a Nikon z6 and the X1Tn transmitter. I cannot seem to activate the HSS at 250ss. And also is it possible to control the power in manual mode via the transmitter?? Also it doesn't shift automatically to TTL mode when I change it on the transmitter. Any help would be much appreciated.

@00DjChris00 5 лет назад

That is what I needed thanks man for the video. Couldn’t use a flash with multi function and now I can awesome but still don’t know how T and H works when I set t-1 and h-10 I suppose to have 10 flashes in 1 second but I have not , only t set to 5 make 5 flashes and set to 10 gives 10 flashes?

@godsinbox 4 года назад

maybe flash doesnt recycle its power fast enough to achieve the settings?

@azikurmi 3 года назад

Thank you

@beerbaron3003 6 лет назад

Good synopsis. What brand of X1 were you using? The Canon version is a bit different on the custom functions. C.Fn 04 is rear curtain sync, C.Fn 06 is three or five groups, and C.Fn 07 is flash beep on/off. You can also hold down 'mode' for 2 secs, to go into group mode, which allows you to mix TTL and manual groups. And hold down the test button while powering it on, will enable the trigger to fire the flash at close proximity.

@robhallphoto 6 лет назад

+Andrew Parnell this was on a Fuji, although I'm fairly certain it's identical to Nikon.

@PeterFootePhotographycom 6 лет назад

Thanks Andrew. I've been looking everywhere for the TTL plus manual groups info. You sir are a legend!

@isidoracontreras486 6 лет назад

Andrew Parnell 408+ Khñjvkbfñ

@michaelscoots 5 лет назад

Can you also adjust compensation in TTL mode?

@caglarsapolyo 4 года назад

nice one

@LadyBellaBurnsville 6 лет назад

I have this transmitter and a evolve 200 and want to shoot HDR with flash. Will this allow me to set variable exposure settings in my Canon 5D IV. Help would be appreciated..thank you

@imranranaphotography 5 лет назад

Godox x1 c can be used with Shanny 600c? Can we change power of flash through transmitter? Can we use shanny 600c ttl with Godox x1 transmitter & receiver?

@drrobotnik80 6 лет назад

Hi Robert Thabk you for this video. Very helpful. I have a d850 and three nikin Sb910. I am planning on purchasing the godox wistro Ad600, x1T and three godox X1R to work with all 3 of my Nikon sb910. Some reviews suggest that the godox x1t and x1r do not allow you to change the power of the nikon flashes wirelessly...have you tried this trigger kit with Nikon body and flash? And did you experience any limitations for controlling flash power wirelessly? Lastly you touched upon the flash zoom in this video. Can the trigger and receiver automatically adjust the flash zoom automatically based on the current zoom on the camera?

@robhallphoto 6 лет назад

+Yasin Ch I haven’t touched a Nikon SB910 since Godox has had the X series, so I can’t personally vouch for it, but much like the Yongnuo 622 system, you should be able to simply put them in TTL and then the X1+x1R will allow for TTL and manual control. As for the zoom, I have no idea how an SB910 would behave.

@drrobotnik80 6 лет назад

Robert Hall Photography I have just bought myself a godox ad600 after yoir very in-depth review and I can happily say so far I'm very pleased with the light. Thank you for your efforts it does go along way! I also have purchased 3 x1r-n receivers with an xpro-n. I will keep you updated on my findings, hopefully it can help you for any future queries yoir viewers may have. Cheers once again!

@jeremyrundle5686 4 года назад

A+++++ Superb

@jaguarjj 5 лет назад

I have a hard time running the X1Tn and the YN622n together, although I did the custom function of a single pin mode, but every time I have to put the yn below, the x1t above it, then turn yn on first then turn camera on then turn the x1t on so all the flashes would work simultaneously for one shot only, then redo this whole process again, it's a pain in the butt, hope there's a way to make them work better than that

@Bobaf777 6 лет назад

Is there any way to keep the display lit up or set the time until it turns off? It seems to time out quickly on mine.

@MegaRay68 5 лет назад

Me too, its such a pain when flashes dont fire

@snemnguni 3 года назад

Hi guys I'm still new in using triggers for Speedlights I want to know do I need a receiver for this kind of a trigger for a Sony A7 using a Godox TT685s Speedlight?

@rigoalcala3527 5 лет назад

Great tutorial, it's helped me with my DSLR Nikon's. I just purchased the Z 6 and can't get the auto focus illumination to work, I just shot an event in a very dark place and I could have used this option. any ideas or suggestions would be greatly appreciated. anybody else struggling with this? ( i own the flashpoint R2)

@NemouseJurado Год назад

Did you solve it? Im looking workarrounds

@wilkbor 5 лет назад

Thanks for the video. I bought one of these and have spent some time reading the directions, which are not completely clear. A few questions that the manual does not explain: pressing and holding hte mode button for two seconds brings up a GR symbol. What is that for?

@kmariamoro3014 5 лет назад

setting groups

@esskay4825 6 лет назад

thanks for the video Robert. I have purchased FlashPoint strobe without its transmitter (it went missing during the courier) FlashPoint things are not available in Asia but Godox ones are available. My two questions (1) Will this work in place of FlashPoint R2 X1T-N iTTL, which is what I had to receive as a pair? (2) Do i need to be careful about good transmitter available in TTL and iTTL models? If the detail helps, strobe model is 'FLASHPOINT XPLOR 600 HSS TTL' Thank you so much in advance

@robhallphoto 6 лет назад

Yeah, Godox X1T-N is the same thing as R2 X1T-N TTL. No there's only one type for ttl, you just need to make sure it's the correct brand (N for Nikon, C for Canon, etc.)

@jaystaton4526 6 лет назад

For "multi", how do I make it trigger multi flashes out of my AD200 for 1 trigger? I can change the number of flashes and the hz, but it doesn't flash more than once.

@Aaqib2nice 5 лет назад

I’m using trigger for canon it’s Flashpoint version when whenever I am putting 860iiC flash on top of trigger it’s turning on HS mode on Flash automatically it’s not letting me to turn off HS mode on Flash while it’s on trigger some time I do need Flash on camera with trigger while flash on trigger I can’t open Menu only thing I can do I can change speed change mode but I can’t turn off HS mode and not letting me open any menu can you tell me how to fix the problem ya my firmware is updated still facing same issue problem with HS is flash get heat up so quickly and I can’t use for long time and I don’t need HS all the time when flash is not on top of trigger I can turn on HS mode but when flash on trigger it’s turning on automatically I really need to your expert advice on this issue

@artmaltman 2 года назад

I love most of Flashpoint / Godox gear but I always struggle with this trigger because the commands are so cryptic. I like it because when camera is high on a tripod I can view the screen unlike the newer model where the screen is at an angle. But man those commands ....

@doubledark2 6 лет назад

Robert, using this Godox system to fire a speedlight which in turn was to fire off a Bowens studio flash; image was almost black, looked like only capturing available light. Dropping shutter speed to 1/40 made no difference. In the end, I used the pop-up camera flash to fire the studio lights and all worked fine. Any suggestions as to why the Godox system didn't work?

@robhallphoto 6 лет назад

I have never personally attempted optical transmission with Godox gear, but the first thing I’d look at is the S1/S2 option to change the behavior of how it works with preflash.

@forsak3none 6 лет назад

good video mate... its a first :D

@vpr5562 5 лет назад

Guys, is there a flickering screen when battery is low on the Godox X1Ts?

@lauraquackenboss4193 3 года назад

To trigger flash, do you need to transmitters? I am unable to get my flash communicating with one on the hot shoe of my camera. thanks!

@PhotoKenji 6 лет назад

I just received a news about the new Godox A1, it is a mini OCF for cellphones with 3 LED lights, which can be triggered by cellphone app, could you please do a review on this product?

@samueljames5167 Год назад

is there a way to control if high speed sync is on or off, or is that only available from the flash?

@jagatpavasia1061 4 года назад

I have godox sk400ii strobe light, it has power of increse or decrese at 1/10 stops, while my godox X1T-N control sk400ii by 1/3 stops. Have any idea to stops light by 1/10 stops ? Did godox X-pro works by 1/10 with my godox sk400ii ??