Graco Charleston Crib Full Build and Assembly 

This video wasn’t particularly helpful for me. But, I was able to screen shot the part where he was flipping through the directions and that helped. 1. Start with putting the right and left pieces on the back. The medium size screws thread through the back and the nut things are what’s holding it in place. So you have to stick the nut in the holes so the screws screw into it. They will either be on the side or the bottom side of the rail. Make sure you have the back facing the right way with the three holes on the legs facing the front. 2. Then do the support piece. This is the long skinny piece that helps hold the side pieces in place. They use the nuts and the medium size screws. 3. Put in the metal piece that holds the mattress up. It has three levels for how high you want it. I did the highest setting for a newborn. Face it so the attached envelope faces up and turn the four metal pieces so they are facing up. This was the hardest part. Having someone to help hold this in place would help a lot. You need to use the smallest screws to attach this to all four legs at the desired height. 4. Put on the front the same way you put on the back, but use the longest screws with the nuts. Hopefully this helps someone and makes sense!

Thank you, we lost our instructions in our recent move for crib assembly and you saved us!

What were the screws called that you used to attach the metal spring part in the video? I lost all 4 of those.

Thank god for your help 👍

Extremelyyyyyyy helpful to me…… the screws was different sizes n so my eyes were blind to that, cause it was a gift n put in a zip lock n so I had to make readjustments 😖🫣😂 thank u.

I found out about the instructions at the same point he did while installing the spring box 😭😂😂

Thanks so much for your help. Bought the crib used and most of the hardware is missing. Trusted the seller, my mistake. Any idea where I may find the bolts and barrel nuts? Thanks.

I don’t understand where the bolts go?

What is the height from floor to the highest setting for mattress?

Thanks buddy

Do you have the instructions or the hardware list for this crib still? I am currently trying to reuse my son's crib now for my daughter and I cannot find the exact instructions or hardware list ANYWHERE.

We were given this crib by friends but they didn’t have the instructions or hardware. Could you email me the manual/instructions?

Didn't really show the steps. Just glossed over what was done and put it in a video.

I didn't get instructions either I thought that was quite ridiculous

The screws won’t stay in

Did you have a boy or girl?

Where tf does rhe bottom pieces go that's on the screw things. This doesn't help

You can’t really see wood screw goes to where 👎

This video was helpful to watch but not helpful at the same time....

I better download instructions. This did not help.

Was not helpful. What so. Ever.

Not helpful.

This video wasn’t very good this guy didn’t show how to install the screw which way n which side. It’s very disappointing. This guy was going just here n there without complete information. Not clear. Worst video. Not at all helpful.