Тёмный

Grado Hemp detachable cable mod 

Custom Cans
Подписаться 12 тыс.
Просмотров 4,3 тыс.
50% 1

** I did get confused and put the pads back on the wrong way round ... I did not think they looked right ;) **
As we have not done the hemp Grados yet I thought it would be good to get someone to send in a pair for modification so we could see how thy were made and how hard they are to mod... Enjoy
If you'd like to check out our shop, use the link below:
customcans.co....

Хобби

Опубликовано:

 

8 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 26   
@Ty_7
@Ty_7 Год назад
Best advice ever, had a similar issue, finally went doc, used debrox on recommendation and globs of brown gummy's came out. Magic hearing returned.
@Bertuslacus
@Bertuslacus 3 года назад
Huge fan of your jobs! Thanks for the video. You reckon it's possible to use a heat gun / air dryer to open them instead? Cheers!
@CustomCans
@CustomCans 3 года назад
Yes - you would just have to be careful not to over heat the driver
@georgewilson1457
@georgewilson1457 Год назад
I though the point of detachable cables was to get rid of the horrible grado cable and replace it with nice cable why did you put a 2.5 on to the cable you just cut off, great video by the way and I am going to mod my new hemps to make them perfect.
@CustomCans
@CustomCans Год назад
We just do the mods we are asked to ;) I would definitely recommend putting a nicer cable on at the same time
@g.fortin3228
@g.fortin3228 Год назад
Looks SO good. Wondering if the mini xlr type connectors might be doable in those ?
@CustomCans
@CustomCans Год назад
I don't think we have done that on this model but you should be able to.
@Spydee2207
@Spydee2207 2 года назад
Watched a couple of your videos and well, still a little confused on the soldering of the socket part inside the headphones. Left and right is soldered to a ground connector pin and +ve and/or -ve pin?
@CustomCans
@CustomCans 2 года назад
Hi - we make the tip of the jack the + and the ring the -
@Spydee2207
@Spydee2207 2 года назад
@@CustomCans so inside the driver itself, it will be soldered to a positive and a negative? And there's no ground?
@CustomCans
@CustomCans 2 года назад
@@Spydee2207 On headphones there are only two connections on the driver which are normally marked positive and negative but you could call it positive and ground depending on what you are sticking on the other end. But... basically inside the driver there is an electromagnet which is just a coil of wire. You are connecting to either side of that coil. Audio is an AC signal so constantly swaps between positive and negative. When the current flows one way the voice coil is pushed one way and then when it the current goes the other way it is pushed back the other way which in turn moves the diaphragm to create the sound waves. If you are using it with a standard amplifier, as a normal jack only has 3 connections for the 4 wires they usually share the negative/ground and you have two separate positive wires. When you use a balanced headphone amp you will have 4 connections, two to each drive with + carrying the signal and - carrying an inverted version of the signal.
@VitorValeri
@VitorValeri 3 года назад
Congratulations on your work! Could make Grado RS2 detachable cable mod?
@ianmason313
@ianmason313 2 года назад
Great video, watched from start to finish and all with the attention span of a 2 year old, do you have a video on how to open the GS2000e by any chance please.
@CustomCans
@CustomCans 2 года назад
We normally warm them up a bit and pick the glue out around the driver until it is loose
@ianmason313
@ianmason313 2 года назад
@@CustomCans Thank you, it was quite easy in the end
@barbaroja.mp3
@barbaroja.mp3 3 года назад
I would like to have a pair of the new Grado SR80x and have them modded by you. It would be interesting so you can make a comparison on the previous e series vs the new series x. Let me know what you think
@CustomCans
@CustomCans 3 года назад
We may be able to sort something out - the best thing to do is to email custom cans and see if we can get you booked in
@barbaroja.mp3
@barbaroja.mp3 3 года назад
@@CustomCans already emailed you a few days ago. Looking forward to your reply
@CustomCans
@CustomCans 3 года назад
@@barbaroja.mp3 Ah - I was away for a few days and do have quite a few emails to catch up on but should get back to you soon
@neurotikk777
@neurotikk777 3 года назад
So you are telling me to buy the ps1000e and send it to you for a cable mod?
@CustomCans
@CustomCans 3 года назад
Noooooo. Just enjoy them as they are ;) I mainly do this for fun - the PS1000 are no fun to mod
@meabster
@meabster 3 года назад
You put the pads back on the wrong way. Cuts should be on the outside. :)
@CustomCans
@CustomCans 3 года назад
Lol - yes, I figured that out after re watching the video ;)
@DomeF.
@DomeF. 3 года назад
Do you make mod for shp9500?
@CustomCans
@CustomCans 3 года назад
No sorry we don't
@DomeF.
@DomeF. 3 года назад
@@CustomCans big F
Далее
DT770 Detachable cable mod the easy and safe way
15:24
Electromagnetic Aircraft Launcher
15:09
Просмотров 1 млн
(Blaze it!) Grado Hemp - Headphone Highlight
32:29
Просмотров 1,2 тыс.
Grado GS1000 detachable cable mod
22:19
Просмотров 4,8 тыс.
Were these made as a JOKE??? - Grado Hemp Headphones
9:57
Can my headphones take a balanced connection?
3:46
Просмотров 6 тыс.
Would you try it? 😱
0:15
Просмотров 22 млн