Graphic Card Step By Step Fault Finding Guide. How to Diagnose a Faulty GPU Using Basic Equipment

Подписаться 151 тыс.

Просмотров 19 тыс.

50% 1

This short video series will help you diagnose just about any fault on a graphics card. This is not exactly a repair guide, it is a methodical sequence of tests that, if you follow them, will show you what part of the circuit is faulty. You can make almost all of these tests using just a multimeter. You can then decide if the fault is something you can repair yourself, but you will know what is wrong with the graphics card. I've split this video up into several parts. In this part we learn what to look for while making visual checks, and then take some resistance readings which will quickly tell us if the graphics card has a very common fault.
I work in collaboration with:
The Electronics Channel (with Carlos and Detlef)
/ @theelectronicschannel
Gran Canaria Uncovered
/ @grancanariauncovered (with Detlef and Julie. Not electronics related)
Det Builds Stuff - / @detbuildsstuff8128 (Detlef)
Retro Upgrade - / @retroupgrade (Carlos)
For All Your PCB needs: free $5 discount coupon
www.pcbway.com/setinvite.aspx...
These are affiliate links, you pay the normal price and I make a small commission.
TEST METERS
Aneng AN8009
s.click.aliexpress.com/e/_DdW...
amzn.to/469ZgOS
www.banggood.com/custlink/mD3...
KM601
s.click.aliexpress.com/e/_DBw...
www.banggood.com/custlink/KD3...
VC480C+
s.click.aliexpress.com/e/_DEY...
amzn.to/3Q3LEz7
amzn.to/46tmNdo
MESR-100 ESR METER
amzn.to/3tiy8hK
amzn.to/3RwvejK
s.click.aliexpress.com/e/_Dmi...
XC6013L CAPACITOR METER
s.click.aliexpress.com/e/_DmX...
amzn.to/3t71Nul
amzn.to/3LDdcbO
TM-902C TEMPERATURE METER
s.click.aliexpress.com/e/_Dm9...
amzn.to/3LFzERv
amzn.to/3PTwuvW
LCR-T4 LOW COST COMPONENT ANALYZER
s.click.aliexpress.com/e/_Dmq...
www.banggood.com/custlink/KKK...
amzn.to/46uzV1R
amzn.to/3RHsmAN
FNB58 USB ANALYZER
s.click.aliexpress.com/e/_Dmd...
amzn.to/3tb1QW8
amzn.to/46oMn30
www.banggood.com/custlink/mKm...
PCI POST ANALYZER
s.click.aliexpress.com/e/_DBs...
amzn.to/46m9Gep
TL460S Plus PCI_E ANALYZER
s.click.aliexpress.com/e/_DnB...
amzn.to/3ZERvOs
TOOLTOP ET829 SCOPE METER
s.click.aliexpress.com/e/_DBw...
www.banggood.com/custlink/KGv...
MULTIMETER PROBE KIT KET05
s.click.aliexpress.com/e/_DE7...
OSCILLOSCOPES
FNIRSI 1014D
s.click.aliexpress.com/e/_DEz...
amzn.to/3RxMFk1
www.banggood.com/custlink/KKG...
FNIRSI DPOX180H
s.click.aliexpress.com/e/_DBX...
amzn.to/468oooT
www.banggood.com/custlink/GGG...
BENCH PSU
NPS3010W
s.click.aliexpress.com/e/_DDP...
amzn.to/3rxsuIf
www.banggood.com/custlink/3DD...
SOLDERING
T12 Station with M8 9501 Handle
s.click.aliexpress.com/e/_DFV...
amzn.to/3FdG8Ul
M8 9501 HANDLE
s.click.aliexpress.com/e/_De0...
T12-BC3 Tip
s.click.aliexpress.com/e/_DeN...
amzn.to/3EUFpqQ
amzn.to/3PB8axw
SUGON T26D
s.click.aliexpress.com/e/_DFx...
QUICK 861DW
s.click.aliexpress.com/e/_DDo...
amzn.to/3PBOKZH
amzn.to/3RCSqNh
PROS'KIT SS-331H
s.click.aliexpress.com/e/_DDo...
THERMAL CAMERA
Infiray P2 Pro
s.click.aliexpress.com/e/_Dmu...
amzn.to/457PgEb
www.banggood.com/custlink/DDG...
MICROSCOPES
Amscope Optical Microscope (copy)
s.click.aliexpress.com/e/_Dlh...
uk.banggood.com/custlink/mKGy...
amzn.to/4675Qp0
amzn.to/459uvrY
ANDONSTAR AD407
s.click.aliexpress.com/e/_Dl4...
amzn.to/3PSQKxJ
amzn.to/48sxej4
EEPROM Programming
TL866 II+
s.click.aliexpress.com/e/_Dls...
amzn.to/3RTCRB9
amzn.to/3LDu3Lu
CH341A
s.click.aliexpress.com/e/_Dk0...
amzn.to/48IZiir
1.8V ADAPTER
s.click.aliexpress.com/e/_Dci...
CONSUMABLES
NC-559-ASM FLUX
s.click.aliexpress.com/e/_Dda...
DESOLDER BRAID (I use size 8045)
s.click.aliexpress.com/e/_Dl5...
s.click.aliexpress.com/e/_DFJ...
MECHANIC HX-T100 Solder 63:37 (I use 0.6mm)
s.click.aliexpress.com/e/_DeZ...
ESD-11 TWEEZERS
s.click.aliexpress.com/e/_DCZ...
amzn.to/3PVfO7e
Learn Electronics Repair is now on Discord! Come and join the fun, it's free.
/ discord
If you would like to support this channel
You can send donations
www.paypal.com/paypalme/youtu...
You can subscribe to Patreon
/ learnelectronicsrepair
Or you can click Join to become a channel member
Thank you
Richard

Опубликовано:

18 окт 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@chol5808 Месяц назад

I have not fully watched all of them, but made it so far to number 4. I would like to thank you for these. Though I had already found the fault in the gpu I was repairing, it helped me rule out any other issues on the gpu. Saved one from the landfill. This guy is awesome.

@LearnElectronicsRepair Месяц назад

Thank you 🙂

@LearnElectronicsRepair 8 месяцев назад

*Parts 2 & 3 are already recorded. Publishing Part 2 : 21st October and Part 3 : 23rd October. Each are 30 mins, give or take and follow the same step by step approach* *Here is the long video I made on graphics card repair, actually a couple of years ago. The GPU Repair Guide* ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SmVdl8kew_4.html This series will add more fault finding techniques

@nigelfewster 8 месяцев назад

An excellent introduction to graphics cards, even though I doubt I will ever try and repair one I have always wondered about their layout. Your practical step through is most absorbing. I look forward to the subsequent videos.😊

@Dutch_off_grid_homesteading 8 месяцев назад

Heya, love these kind of video's there is so much to learn from you love it can't wat for part 2

@sempiternal_futility 8 месяцев назад

4:30 thanks so much for this! never understood this, until now :)

@zeneyep6590 6 месяцев назад

@LearnElectronicsRepair Thank you so much for this channel! I'm just beginning my journey of learning my away around a graphics card and these videos have been so enlightening. Thanks again!

@Lightrunner. 8 месяцев назад

All what to do is to show Richards super explain Videos.. 👍👍👍👍👍🖖👍👍👍👍👍

@teslasapple 8 месяцев назад

Looking forward to the next instalment 👍

@christy6430 8 месяцев назад

I have one with open circuit on 12v rail. As a beginner looking forward for part two.Thanks.

@robokaland-official 8 месяцев назад

Thank you! ❤

@A6Legit 6 месяцев назад

Commenting for the algo. I'm sure this info is gonna help me a ton trying to figure out why my repair didn't fix. 😆 Just hope I don't need any extra fancy tools

@inkybinkybonky3901 8 месяцев назад

Awesome!

@JuozasU 8 месяцев назад

Great video as always Richard, thanks for creating a comprehensive guide for GPU repair. I was watching your videos for some time now, you inspired me to try some repair myself. Just now I was checking not working GPU (GTX 980 TI) I bought on eBay, it has some blown fuses on 3.3V and 12V. While checking data lanes, 9-th lane from both side reads a bit different, front ones reads about 0.77 but one side of the 9-th - only 0.64, from the back all reads about 0.64 but also one side of the 9-th - only 0.59. Is this enough indication of shorted core? I'm not finding shorts on any coil.

@LearnElectronicsRepair 8 месяцев назад

I would say the 9th lane reading 0.77/0.64 is enough difference to be suspicious, if the graphics card powers up but does not detect it could well be a damaged GPU core that is causing the problem. Have you tried the card on a single lane mining adapter? I would give it a go and see what happens. Of course if the GPU silicon has internal problems, it may still not detect. Keep watching as I will go much more into step by step detail iin the next episodes

@amtpdb1 8 месяцев назад

Please be sure to tell us if you are using diode or ohms mode each time you change a check or operation. "Again we are still in diode mode with black on the ground" or " We are still in diode mode or Change to ohms mode and we will check". This is only as I was not sure if you were still in diode mode when you turned the board over. Just trying to learn! Thanks for the video.

@jannestrom6657 6 месяцев назад

Hello and thank you for your informative videos. I have a :INNO3D Geforce RTX 2060 2060182-6G PG161 63-1ADT06H1 K A9 45 A3 the 12v is shorted to ground and there is only one 12v supply connector on the board. Im looking for mosfet replacements but cant seem to find any. Where do you get yours? the mosfets markings are: AL00 9Y 1F Some other mosfets are on the board but i think the AL00 's are the VRM circuit. Other mosfets on the board: QA311 926 09R GS9219 0NVM

@randomness2615 8 месяцев назад

You are excellent teacher of electronics. Please do more video about graphics card. Do you have any telegram channel or WhatsApp?

@lnglng6961 8 месяцев назад

❤❤

@williamchikomwe9364 8 месяцев назад

Hie Richard ,I like your videos because of the use of pen and paper .The pcie lanes capacitors ,why are they connected in series with the power line ,not across power and ground. If series what is the use of them ,since this is a DC circuit,Thank you're

@LearnElectronicsRepair 8 месяцев назад

The PCIe lane capacitors are not in series with the power line, they are in the LVDS (low voltage differential signal) data lines. As the data is transmitted at very high frequencies it easily passes through the capacitors, but they block any DC voltage differential between the motherboard and the graphics card which would easily damage the input circuitry that receives the LVDS signals.

@Joseluis-tf4in 18 дней назад

👌

@Aston3003 3 дня назад

would it be possible for a gpu with some corrosion near one of the memory module to work until you clean it with alcohol. I cleaned the back of a gt 710 and noticed the green corrosion very close to one of the memory. After cleaning its artifacting

@yeetisthefetus7214 3 месяца назад

Hi i used to work for a computer repair shop and i asked my boss at the time if i could take this broken gtx 970 home to see if it is repairable and he said sure. So i brought it home and put it in my rig to test. It booted into bios fine and stayed on while it was there. And it did boot into windows but it would only stay stable for like maybe a anywhere from a few minutes to secs. I have torn the card down a few times to make sure it is clean and i even tried the oven method and i also did probe it with a multimeter and everything seemed from for resistance wise (because i dont have the proper tools to test it while it is on for voltage). I had it work long enough to try and install the drivers for it, but it ultimately crashed and restarted the computer. I dont think it is repairable, but if it could be, what should i try to do?

@UmarAbid 23 дня назад

Were in the uk are you based? Also were can i get tester to test gpu?

@LarixusSnydes 8 месяцев назад

4:33, That top-right mounting screw looks quite crusty, especially at the top right next to the diagonally to top-right pads for the unpopulated capacitor C2761. At 23:23, I might have misheard you but while measuring the voltage you say Watt instead instead of Volt, twice.

@78vinyl97 8 месяцев назад

He said point seven five one that's why you misheard him.

@damianomartucci9814 Месяц назад

Hi! My desktop pc graphics card, MSI GeForce GTX 1060 3GB has an issue: it cannot detect vram, so can't work as expected. I measured resistance at the PCIe 6 pin connector as you did, and while two grounds are ok, the center ground measures 92.4 kilo ohm. Could this be the issue? What is solution? I can't trace the path, i lose it. Can i short the three grounds together for testing purpose? Is it safe?

@Irilia_neko 8 месяцев назад

Personally I don't call that a graphic card, I call that a door stop 😹

@MaGestic1 13 дней назад

What do you want ? You want the man to illustrate it on your Rtx 4090 ? You can always send it👍

@MaGestic1 13 дней назад

What do you want ? You want the man to illustrate for us on your RTX 4090 ? You can always send it in 👍

@danieloctrinov7681 8 месяцев назад

Please answer, when laptop detected show error 43, but after disable enable working properly but still not show on task manager, one inductor, mosfet, mosfet driver on vrm was remove because shorted high side

@alanrichardson1672 8 месяцев назад

I'm not really that familiar with graphics cards - can you please explain what a mining adapter is all about?

@ser_olmy 8 месяцев назад

The so-called "mining adapters" are risers/extenders commonly used in cryptomining setups, where multiple GPUs are connected to one system in order to solve cryptographic hashes as fast as possible. As you usually cannot plug more than at most two GPUs into the PCI-e slots on a motherboard, these adapters are used to mount the GPUs somewhere else, even externally to the case. As PCI-e bandwith isn't a big issue when doing cryptomining, these adapters usually have a full (16-lane) PCI-e slot at one end, but just a single-lane PCI-e plug-in adapter at the other. This works because all PCI-e compliant devices are required to function (albeit slower) with only one lane connected. It also means these "mining adapters" are ideal for doing repair work, as you can easily connect any GPU to any PCI-e slot without having to plug it directly into the motherboard. You can even have the GPU running while lying disassembled on the bench, as long as you take reasonable measures to prevent overheating.

@ronakbhanushali8753 Месяц назад

Hi sir need help, all voltages getting generated the vcore and vram are up but still no.display no blank display so its not vram could you please guide what should I check to find fault ? Its Rx 580 and rx 560

@nassergamer9664 4 месяца назад

I have been searching for the video about how the GPU works and couldn't find it! Can you put the link to it in the comments

@davet3804 8 месяцев назад

C2029 at 4mins22 looks darker

@pedpez9769 8 месяцев назад

Hi thanks for the effort but there are faster ways to diagnose.

@rogueninja1685 8 месяцев назад

The lesson is called step by step GPU guide. Todays lesson is what do the shiny gold strips mean. Now I know. Sounds like you already knew. Maybe wait for a later lesson to get to the part you don't know yet