Great Wera tools to start your collection. The Tool-Check and the ratcheting bit driver. 

Pozidrive is the most common screw head in Germany. It is now slowly replaced by Torx. Most of the wood screws are PZ-2. I have never seen a Robertson head.

Wera has actually moved their production to the Czech Republic in 1995 when they built their own factory there. The headquarters are still right around the corner from me in Wuppertal, Germany tho. Oh, and the Böker Plus line of knives is actually also made outside of Germany. They still make a fair amount of knives here in Solingen, but have also built a big line of imported knives, as German labor costs are just too prohibiting for many customers, often me including.

A huge amount of Wera and Festool is made in the Czech Republic. I have many products from both and cannot fault the quality. Great observation.

I've had a similar Wera bit set - just the bits and an extension - for about a decade. Likely longer. None of the bits are stripped and it's my go-to for this kind of thing. Yes, it is very handy having the Pozi bits. Assembled a Craftsman shop chair; couldn't believe that it needed a Pozi. I have other bit sets, too, like most folks: Milwaukee, DW, Makita, Bosch, Astro. I prefer the Wera. I also have two of the ratcheting drivers - the long and the shorter one like yours - and three of their bit handles in various sizes. Screwdrivers, too. Their diamond tips can often grip a stripped fastener. Great stuff.

Wera makes my favorite stuff. I like their innovation

@11:11 I *LOVE* the Rapidaptors. A friend of mine recommended them to me. He said "Life's too short to constantly have to reach down and grab the bit from the screw" LOL. Also, you can operate it one handed. It clicks open, but stays open so you can put in a new bit. Very easy to do one handed. So when you're up on a ladder, and you have to change bits, it's quite useful. It's the small things in hand tools that put a smile on my face. Finally, I have the same kit and the low profile ratchet comes in so handy when working with tracksaws. When you adjust the saw to a track, it's hard to get a screwdriver to work. But the Wera ratchet from the kit works perfectly. I constantly reach for it now.

I always like your style and vernacular, thank you for your wisdom and time.

I’ve had this kit for a couple years and it goes with me on every motorcycle trip I take. My trips range from 3 days to 10 days and we are often way back in the mountains, so having quality tools is essential. I’ve never had a problem with this kit

Wera are by far the best tools I’ve ever owned. I have some of the “Joker” wrenches now, as well as the ratcheting screwdriver handle with the rapid bit tech. I also recently ponied up for one of the high end bit sets and man, I had striped three previous bits, then switched to the Wera. The Wera bits made short work of it. I have a feeling I’ll be passing those wrenches down to my son one day, Maybe even the bits!

Fords fender liners are held in with 5.5mm bolts 🤷🏻‍♂️

1:38 the hand engraved number is an inventory number, in the eastern bloc and still today its fairly common for companies to register expensive stuff like measuring equipment in an inventory log, to keep track of what they have and don't have

Nice watch.

I’ve needed a 5.5 on chevy blower motors and resistors! I’ve heard about wera and it’s definitely interesting. Considering getting some myself

I have the 3/8 ratchet and sockets from Wera. Really nice! Hard to build a set though.

Your Look Skrewdriver seams to be a Wera as well!

I could have sworn I thanked you for the shout out certainly appreciated the kind words!!

Nice tool set and nice watch. I’m a tool guy and a watch guy!

Have the same- a must have😂

Nice watch! 👍

Where tools rival snap-on. They have a screwdriver with the bits hidden inside the handle. The shaft is fully hidden within the handle for stubby use but can be extended the length of the handle as a regular screwdriver. Also the entire shift can be removed for use as a bit holder in a drill or impact tool or as a longer extension for that tool set you were demonstrating. Look up their JOKER combination wrenches.

You had me worried for a moment, thought you was going to say Made in China. Will get one ordered up soon. Nice review.

You should try the wera kraftform 27 ra. Its got both the pop out bits and the ratcheting.

Suggest you add the 1/4" to 4mm bit driver for the larger handle,really makes using 4mm bits easier to use

You can see by looking at the shape of the red screwdriver that it comes from WERA, too, probably from the 80/90ies

Pozidriv is the most common drive type seen in carpentry and construction in the UK, though Phillips tends to predominate on machinery. And I've never seen a Robertson screw in my life, though I have plenty of bits for them in various sets!

Pozis used to be used on British and French cars (now almost all Torx) but all builders use Pozi in the UK.

that´s life, you never kno when you are going to need a neck knife....now this is an interesting review ;)

I’m looking forward to seeing more with this driver. Especially want to see it compared to the SnapOn versions. Do the short bits lock in place as well?

Where do you get that bit extension for 1/4 in socket?

Qual o modelo dessa caixa de ferramentas da Snap on? Você já fez um review dela?

Anyone know why my case is different? It doesn’t have that spring loaded button to release the bits

I have a few of vintage craftsman sockets in 5.5. I wish someone could give me some history on that.

The Whole Czech Republic just went "Uuuuuuuu...."

I get Wera tools, I think they’re good, but I mostly never personally like most of the stuff I have used from them. However, that little bit ratchet is a true gem. I’ve had it for 7-8 years and it has held up to a lot of abuse. I keep it in my “go” box. It’s always with me and it has saved me a lot of headaches. That “rapidaptor” is probably the best locking bit holder on the market (with the obvious caveat of it’s bulkiness). My mother has the pop-out bit storage model you mentioned. When all is said and done, it’s way too complicated and the extendable/removable bit holder results in too much wobble imho. The goods: screwdrivers, bits, bit organization, hex and torx keys. The meh: the ratchet and socket range. AVOID: their stupid wrenches.

Those are closer to jewelry than tools but they are beautiful.

What is the name of snap on mini ratchet with hole for finger on the end ?

Any update on the bit kit?

So wera vs snap on vs facom… which one is better ?

Are the bits Impact rated

Being new to E-Bikes would Wera's 1/4" Bicycle Set Torque 1, 16 Pieces be a good choice in your view?

My 816ra is very wobbly in the shaft. Anyone else have this issue?

You know that the red screwdriver you have there is also Wera. Older model that was rebranded.

On second thought, I think that’s a Deep Sea… Considerably more interesting than a Submariner.

@4:45 Doc, your old 'Look' pozi is in fact a Wera - I'm surprised the penny hasn't dropped, just compare that handle profile to your other Wera screwdrivers, I've a set in black.

Have you tried the new Icon ratcheting bit set yet? Which would you pick between the Icon and the Wera?

just found this video. the plastic on the wera boxes just slides off. it is also made for the part of the world where you do not carry a knife everywhere

I see some interest in 5.5 bolt head. Well, bit heads have 6 sides, are too small for nr.6 socket and don't fit in nr.5 socket, so I gues 5.5 socket is more like a second bit holder.

The Czechs make, and have made for a long time, high quality small arms

Nice watch also what kind is it ? Thanks !

Nearly every wood screw is pz1,2 or 3 in the uk

For your info Czech have long tradition of high quality metal industry and machining, between two world wars Skoda cars were among the best on world also Skoda produced heavy artillery guns and during Nazi occupation Germans didnt touch the fabrics and continue to supply armament to them

The red Posidrive screwdriver looks like an unbranded WERA product?

It's amaying for me that in America they don't une pozidrive that much, it's much better than philips in any aspect and invented by american company. Here in Europe we use it often, actually philips is used mostly in black drywall screws.

👍👍👍👍👍❤❤❤❤❤

You've been using Wera for years. That Look PZ screwdriver is by Wera.

Don't buy any pop out holder, same applies to bits inside handle. For Ratchet screwdriver, actually you should compare with Gedore 2675 SilentGear, unfortunately it is not available in US Amazon. All Wera bit adaptor whether for manual or impact driver, the bit holder part is too thick, you can not even deal with Ikea 😅. Thus if you like Wera exchangeable handle, go for Wera 810 or 812, same shape, only difference is the bit holder method, mechanical or magnetic. Also Wera 400 T handle & Stubby handle are good to have in case you need work inside confined space like inside drawer.

Wera has wicked Robertson and beater flat blades. I beat the crap out of mine, never buy another one

Why do all US &A reviews have to have knife’s or guns as part of review

Felo в руке лучше сидит, чем Wera. Сам опробовал, есть и то и другое.

So did WERA copy that LOOK handle?

Snap on more like snap off because I’ve broken more snap on tools than any other brand plus they are over priced

their slogan - "Be a tool rebel!" is fucking cringeworthy. That would've appealed to me when I was 12, now I'd be embarrassed by it.

Believe you mee that 90% people in Check Republic liwe better than 90% of people if SAD .

Czech republic is Soviet Union? LOL Americans and geography. xDDD

Taiwan 🇹🇼☝🏻