Grizzly 700 1 way bearing Issue Don't Go Cheap!!! 

Yeah that's a oof if I've ever seen one. Glad to see it's back together and working good though. 🤙

Awesome video

what is that bearing behind the one way? im trynna replace it and i cant figure out how to get it out.

Could i ask some advice from you. I did the same thing ( chinese bearing) but i started it up for a test sound and forgot to put the outside cage on that covers and steadies everything and immediately sounded f'd up. So here i go doing it over with a yammy bearing and replacing the other bearing in there as well. Is a guy supposed to dip the bearing in oil first to coat it or just fire it up dry, is my question. Thx Wes

Hey man my 21 grizzly making loud knocking noise like yours and catching fwd and hard to put on neutral and i turn it off pull the left hand brake to electric start it and would try go fwd every stroke maybe its the one way but not too sure also the bearing went out on the cage that sits over the main clutch

Thanks

Whats up my friend! Man so mine has the same marks on the slot the bearing rides on its not terrible but u can see it and the one way bearing and my wet clutch shoes are gone if i get the new shoes the springs and gasket along with my OME one way bearing will.i be ok with its being a litter chatterd ? Or i need to get all of it new

Having issues with the wet clutch on my 03 660 grizzly any tips or tricks when putting it back together. I’m about to spend $800 on new parts from partzilla and don’t want to mess it up.

About to replace mine on my 2016 Grizzly 700. I have about 2000 miles on mine along with a EPI clutch kit. What happend to my machine is I have lost most of if not all engine braking. Let off the gas on a downhill and it's like im in neutral until I blip the throttle. Getting the OEM Yamaha one.

I've got a similar problem and I was wondering if that could cause it to run for a few seconds and cut off

Hey do you have change all that for one way bearing? Where did you get your parts? PARTZILLA? I’m in Ohio and Yamaha is a fortune to just look at it. 2019 Yamaha grizzly 700 just started making that noise.

I just found this video and ..yup.. I will never ever, to the power of 10, but all-balls bearings again after a pilot bearing failed inside my rear diff less than 100km's after it's rebuild and took out the diff casing. If i can avoid it... no Chinese parts go in my tractor, ATV or vehicles. Id purchase a OEM re-man before selecting china knock-offs if given the choice. That grunting noise you made i know i've heard myself make before.

I have a 98 grizzly 600yfm 4x4 it runs good but ween you go done hill it is like it kicks out of gear and makes a grinding noise it will not hold it self back you got to hold the brakes wood you no if this is my problem on it

No shit Sherlock but until the oil gets to the bearing it's dry until the oil goes thru the small channel to get there. I just meant dip it in oil and install that way it's not dry for how ever long the oil takes to get there.

Greazly Who? Comment and subscribe? By rough you mean seemingly gentle miles? At least you have Brad Paisley playing in the background! It makes the video somewhat bearable. 😎

The Chinese parts ar JUNK!!!! I bought the “high quality forged rollers” one way bearing and the wet clutch kit and i have that one way bearing CLUNK righ from the get go when you let off the throttle. Everything about these Chinese parts is a Disaster I mean I don’t even know how they can take the time to build something but yet build it so crappy it’s designed to fail! Factory Yamaha parts is the only way to go. It sucks that they are so expensive but when you bolt on Chinese parts, and they fail right out of the box, there’s only one solution and that’s to buy the Yamaha parts. This goes with all other brands as well.