Grizzly G0860 Review - Dust Collection - Woodworking

Подписаться 1,9 тыс.

Просмотров 10 тыс.

50% 1

As a follow up to my recent video showing how the Grizzly Dust Collector was packaged and assembled, I wanted to provide a Grizzly g0860 review of the features of the product.
The Grizzly g0860 is a 1.5 hp dust collector.
Grizzly G0860 Cyclone Dust Collector - bit.ly/3xs4cOt
Rockler Dust Right® Quick Change Multi-Port Tool Set - bit.ly/3oZZ6F6
Rockler Dust Right® 4'' Quick Change Handle with Expandable Hose - bit.ly/316cQpy
For a all Grizzly Tools visit grizzly.com

Хобби

Опубликовано:

26 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@DIYwithDennis 2 года назад

Hi Folks, thanks for watching and let me know what you think of the video in the comments. below. If you liked what you saw, consider giving a 'thumbs up' and subscribing to the channel - Thanks! Dennis

@Not-a-GSD 2 месяца назад

I use 40 to 60 psi air to clean the filter. I really don’t like beating the pleats on the filter. FYI I have the upgraded HEPA filter cartridge.

@Stan_in_Shelton_WA 2 месяца назад

20 amp breakers tripping are most likely old breakers, they get lower with time. Second is other current draws on the circuit.

@btrswt35 Год назад

We used to have a grizzly warehouse in muncy Pennsylvania. It was a multi hour trip, but was worth it to avoid their delivery cost because at the time it was cheaper. They also used to have tent sales which were fun. Alas they decided to close the warehouse and consolidate. Unfortunately, haven't bought anything from them since.

@DIYwithDennis Год назад

Thanks for the comment David! Interesting, I heard they were in PA at one time. Wish they were still there. I have several of their machines (jointer, planer, bandsaw) and I've been pleased with all the purchases so far. Their customer service is really great! Thanks again!

@Wood_Slice Год назад

The breaker popping off might have to do with current load on the same line. If there are other equipment being plugged into it. I think a dedicated 20amp 110volt curcuit for JUST the collector might not have the issue

@DIYwithDennis Год назад

Thanks for the comment .... could be ..... personally, I've never had an issue since the recording, but I only operate one machine on that circuit at a time - thanks again!

@beardedgarage 2 года назад

good review, thank you. Have you tried hooking up both 4" ports? Just curious if it's enough suction

@DIYwithDennis 2 года назад

Thanks! yes, i now have both ports set up with 4" hoses. I use one that is dedicated to my jointer because of my garage setup and the second floats to wherever i need it, i.e., miter saw, band saw,, table saw, planer. I did purchase 2 blast gates from Rockler and I only keep one open depending on what tool I'm using. But to your question, I did run a quick unscientific test. I ran the additional hose to my miter saw and kept the other on the jointer where it stays. Opened only the blast gate to the miter saw for a few cuts. Then opened both gates for a few cuts and just tried to compare the amount of dust being pulled into the hose connected to the miter hose and didn't notice any appreciable difference. Hope this helps! Dennis

@malovivv607 2 года назад

You mentioned that you replaced the stock canister with a Hepa filter, is that a part you sourced from Grizzly or was it 3rd party?

@DIYwithDennis 2 года назад

Hi Malovi .... thanks for watching ... it was sourced from Grizzly and is compatible with the g0860 .... here is the link www.grizzly.com/products/grizzly-hepa-filter-upgrade-for-g0860-g0861/t30489

@Boxboys.Audio.Sound.Solutions 10 месяцев назад

Can you provide a link to Amazon where you got the adaptor for 30a to 20a circuit ?

@DIYwithDennis 10 месяцев назад

Hi actually it was 30a to 15a - here's the link for the cable I purchased www.amazon.com/gp/product/B076ZSYZTD/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

@tomowens2720 9 месяцев назад

If it's so vibration free why was the glass sliding around?

@jd1399 Год назад

I want to get the Hepa filter but the ones from Grizzly are twice as much as the Wynn canister filters, can you make an adaptor to replace the filter for a Wynn Hepa?

@DIYwithDennis Год назад

Hi JD, sorry, I have no idea - maybe call Wynn to determine if they have any experience with that - please post on what you find out - thanks!

@jd1399 Год назад

@@DIYwithDennis they did not, just referred me to the diy plenum videos but those are on a different set up, grizzly already has their own metal plenum box.. how does your filter attach? I haven't seen any pictures of how it looks under there.. im sure something can be made but trying to find the info before I buy..

@DIYwithDennis Год назад

@@jd1399 ok - take a look at the Grizzly manual on their site for the dust collector -there are some pictures that may help starting on page 21

@craigmeaney 2 года назад

Thanks for reviewing this unit, I have been considering it for several months. How’s the noise level? I’m working in a basement shop. Similar to you, I’d mainly be using it with a planer, jointer and bandsaw.

@DIYwithDennis 2 года назад

Hi Craig, thanks for watching! I'm working out of my garage so it may not totally match your situation but ..... If my sound meter is still accurate (it's old) the sound level at about 10 feet is ~85 db and if I stand on the other side of the door leading into the house it registers ~62db .... Hope that helps ... I also have a video on the assembly process as well ..... Thanks Dennis

@craigmeaney 2 года назад

@@DIYwithDennis Thank you that is helpful. How is the unit running 2 months later?

@DIYwithDennis 2 года назад

@@craigmeaney Hi Craig, no regrets, I'm in the middle of my first real rough lumber project (kitchen prep table) and it's doing fine although I have to say that 20 gal collector fills up pretty fast when doing a lot of dimensioning :)