No video :(

GSXR Wheel Bearing Removal and Replacement | Suzuki GSXR 1000 | Partzilla.com

Подписаться 179 тыс.

Просмотров 69 тыс.

50% 1

Parts for GSXR front wheel bearing replacement: bit.ly/GSXR-front-wheel-bearin...
See the GSXR front wheel bearing parts diagram: www.partzilla.com/catalog/suz...
Learn how to replace the front wheel bearings on a Suzuki GSXR 1000 motorcycle. We’ll start by removing the front calipers and then dropping the front wheel out of the fork. Then, John will show you how to remove the old dust seals and bearings. Next, John will show you how to use a bearing driver set to install the new wheel bearings and dust seals, and then we’ll wrap things up by getting the front wheel back on the motorcycle.
Read how to do this job step-by-step: www.partzilla.com/blog/suzuki...
VIDEO HIGHLIGHTS:
Removing the front wheel - 2:00
Removing old bearings - 2:47
Installing new bearings - 5:56
Replacing the front wheel - 9:48
Buy Suzuki motorcycle parts here: www.partzilla.com/parts/search...
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2007 Suzuki GSX-R1000, but you may have similar steps for your Suzuki motorcycle. If you’re not sure whether these steps apply to your machine, leave a comment and we’ll get back to you.
RELATED CONTENT:
Suzuki GSXR front brake pad replacement includes caliper removal:
• How to Change Front Br...
Suzuki GSXR 1000 Won’t Start Troubleshooting
• GSXR 1000 Won’t Start ...

Опубликовано:

9 фев 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 65

@byronthomas4733 4 года назад

I appreciate you taking time out of your schedule and sharing your knowledge with us.Thankyou

@kawilifezx10r23 5 лет назад

Little heat to hub put bearing in freezer for a bit put cold bearing into the heated hub slides right in. Well takes less effort. The tool kit is cool but for a rider who will o ly do this if ever every few years just use old bearing to drive new bearing in. Nice vid gonna check the website now.

@tommoso55 6 лет назад

Brilliant vids ol lad.. Really is the go to vids for repairs and servicing.. Cheers Tony from the UK

@ac0ncernedcitizen 6 лет назад

Love these vids. Wish I had the space and tools to work on stuff like this.

@abegaz9582 9 месяцев назад

great video, especially the part where you added the extra grease to the bearing. that's a useful tip. as someone who rides off road, all the river crossing I do really eats my bearings alive. I think this tip would really help in protecting my bearings. cant' wait to try.

@a.j.stafford5857 6 лет назад

Freakin love this guy and partzilla

@user-cs7yk7mi4h 3 года назад

Thank you very much for this video from Belarus)

@Aryan-cp4ey 6 лет назад

I have’nt bike but i’m enjoying your videos 👍🏻👍🏻

@TwoWheelRocco 4 года назад

Thank you, Great job..

@bristol8920 5 лет назад

Thanks you made it look easy......... I was a bit concerned about the origins of the bike with a dust seal missing and the tyre tread pointing in the wrong direction...... thanks for posting........

@ofueru2219 6 лет назад

And I'll show you how you gonna get it done lol I love you

@upsidedowndog1256 6 лет назад

Another great video. Having a twin is a bit like cheating though!

@deandee8082 Год назад

if you notice the seal is like 1/4" deep so you can lay the wheel right on wood to get that first 1/4" which is the roughest, then space it between wood whatever.. I like sealed bearings over non, spray a little creep in the race first then drive out. helps.. also place your bearings and seals in the freezer, yup

@khyalgul9562 6 лет назад

Great from Pakistan

@oliverbreit9334 3 года назад

How about an Engine Rebuild Video with the legendary Engine of Suzuki GSX-R 1000 K5/K6?

@Tunasub1993 2 месяца назад

Is there is stops in the wheel that keep the bearing from moving further into the hub, what's the reason for the spacer in the middle?

@w.r.806 4 года назад

Little off topic..but dies anyone know or have a link on that tank pad, protector decal? Thanks

@nuclearchris832 4 года назад

I did not know you have a twin brother in the shop😀

@bensonwest6821 2 года назад

My spacer was too long when i installed the second bearing and it seized them up. Why did this happen? Do I have to trim it down? I ordered a new spacer from you guys.

@markfreese3396 Год назад

What is the spacetr used for?

@daveyt4802 3 года назад

Trying not to dent the discs is another thing you don't want to do. $$$$ I use the interlocking floor square pads. Bearings in the freezer for 1 hours helps before install. Old bearing works for a driver.

@ShahidKhan-pt7ko 6 лет назад

My vfr 800 abs is not working plz helf say same thing in coments

@chasemitchell6983 Год назад

I have a 2014 gsxr 750 and I’ve replaced the front wheel bearings, cylinder, calipers and spacers and my front wheel is still wiggling around a little, is that normal ?

@dkj4183 4 года назад

Great instructional video. Thanks much! Question: How many miles are on those front bearings on that Suzuki GSXR 1000? Thanks Again Dean Jackson Seattle

@HECLUV2476 6 лет назад

Just wondering when will you be doing the rear bearings? ... would really like to see it and it would be very helpful to me

@PartzillaParts 6 лет назад

It's in the making. You'll see it soon!

@HECLUV2476 6 лет назад

Cant wait thx

@artursarol 5 лет назад

Hi John. Great video. Just wanted to let you know that the tyre is wrong way round or the wheel put back on wrong way.

@PartzillaParts 5 лет назад

ha! Good catch, it is wrong. I just put it back on the way it came in, didn't check the direction of the tread.

@emilesp01 6 лет назад

What torque wrench is that? I've been using a Tekton but would like to get a digital one just like the one John always uses on all of the videos.

@PartzillaParts 6 лет назад

It's a Snap On torque wrench, they have a few versions

@Pinozcyclezandridez 5 лет назад

How did not tightening the left side pinch bolts help align forks?

@jarnom85 5 лет назад

If left side were tightened things would not move and seat and align properly. After compressing front few times allows it to seat and align properly and then tightening left side all would pretty much guarantee it to be seated and aligned.

@ronanreilly9487 6 лет назад

Hi John I have a Suzuki Ozark 250 atv and there is oil coming out from the valve cover on the top of the engine. What could be wrong could it be a gasket or a seal??. Sometimes the atv does stall what it is taking over what could be wrong can you please help???.

@PartzillaParts 6 лет назад

It's most likely a bad valve cover gasket...

@naveedaka 6 лет назад

sir...why you didnt apply grease on the outer race before hammering??

@PartzillaParts 6 лет назад

It's not necessary

@mydogsparky 6 лет назад

Hello from the UK, My front bearing just self destructed on my 2011 gsxr750 21000 miles on the clock and it has destroyed the inner wheel. Now one bearing is totaled but inspecting the other ,the grease in the bearing is toast , i mean it is totally shot and not doing its job, So it got me thinking, we all lube our chains and check fluid levels but forget about prob the most important stuff like wheel bearings. So is there any maintenance procedures we can do to help prolong the wheel bearing and prevent expensive garage costs. There doesn't seem to me to be a way of re greasing the bearing without popping them out (which means you have to replace them anyway) ?

@PartzillaParts 6 лет назад

Since they are sealed, they are difficult to maintain. Inspect them when you replace your tires and replace as necessary. They should need little to no attention. Riding in extreme weather conditions can cause the grease to flush out eventually. If you have any concerns, replace them with fresh bearings to be sure.

@aaaaaaaaaaaaaa4151 2 года назад

@@PartzillaParts -people using power washers are the cause of many problems......swing arm bearins are very prone to rusting when pressure washing bikes, dont do it!!!!

@paalmaar 5 лет назад

Im about to buy myself a second hand Suzuki GSXR 750 from 2009. Its having 19450 km's on it. Do you have any tips where i should be looking at really closely?

@Kayveelee 5 лет назад

Specially take a Look inside the fuel Tank. Some one These machines Had trouble with rust and your fuel pump can ne Stuck in rust.

@PartzillaParts 5 лет назад

Fork seals, fuel tank and general wear and tear. If something catches your concern...run or establish that you can fix it cheap.

@juandelacruz7277 5 лет назад

They only use one front axle? Its the same for a gsxr1000 2015? One front axle?

@PartzillaParts 5 лет назад

I'm confused, is there a reason to have more than one axle?

@mateuszbarya9098 4 года назад

@@PartzillaParts yamaha niken hahahah

@justinadams1213 4 года назад

After driving in the second bearing it felt like the spacer was too tight and that bearing was bound up a little. Is that possible? ‘11 cbr1000rr

@jstrndm945 4 года назад

Does your bike feel wiggling? I have those problems with my bike :(

@PartzillaParts 4 года назад

The bearing should run smooth but not free spin. Anything is possible.

@HalfdeadRider 4 года назад

Yes, you should not do it quite as rough as in the video, you want it to just touch on the spacer, he went to far in the video. It even looks like it has distorted the bearing slightly because of his ham fisted approach, even when drifting the old ones out he just smashed them out, hit one side once then the other, over and over until it drifts out evenly or you could damage the wheel itself, and they are not cheap.

@Elv151982 3 года назад

@MrGrey did you ever figure out if the bearing was ok? I'm having same issue

@theforgeproject917 3 года назад

@@Elv151982 it was fine took it to a shop and they said it’s ok

@mayurbedarkar5635 4 года назад

How many max km change wheel bearing

@HalfdeadRider 4 года назад

They can last many miles/years, just change them if there is play in the wheel or if the wheel seem not to spin as free as it once did, there will always be some friction from the bearings themselves and the brake pads on the disc surface.

@HighGrade_FireBlade 2 года назад

You realize that those bearings come with Mobil 28, a clay based grease, and yamalube race grease is lithium soap based? They are completely incompatible and will result in the base oils of the two greases separating. If you ever repack a sealed bearing you should clean as much of the factory grease out as possible. Plus there is a ton of science and math that goes into calculating how much grease to put in a wheel bearing. Too much can cause churning which increases friction, causes heat, and results in premature bearing failure. High speed bearings should have a 40% fill max. Putting in extra grease can most certainly hurt it.

@sharonsharon2604 6 лет назад

So...

@N269 3 года назад

Open bearings????? Not 2RS?? No wonder those bearings are nackered. That's so bad.

@jvergos251 6 лет назад

Tell that customer his tire is mounted backwards on the rim. Needs a new tire, If it was removed and mounted again the opposite direction he would have the old tire carcass separate. New tire!

@HalfdeadRider 4 года назад

Tyre is on correctly, I guess you're used to car tyres, the tread works differently on rear bike tyres, the fronts on bikes are usually mounted as you would expect looking at just the tread.

@gilomoto5148 5 лет назад

I wouldn’t let this guy loose on my push bike. If this is a dealer his tools for this simple task r a joke.

@PartzillaParts 5 лет назад

We don't work on push bikes anyway.

@HalfdeadRider 4 года назад

The tools used are fine, the tool using them needs to chill a bit and do it properly, he should have stuck with the slide hammer, drifting them out is fine if you do it correctly, he just smashed them out rather than drifting them evenly, definitely no need for any tool for the dust covers either lol.