Guide to Fixing Transmission Issues with Expert Precision G37 Q50 3.7L and M37 ( Code P0720)

Подписаться 3,6 тыс.

Просмотров 54 тыс.

50% 1

Guide to Fixing Engine Issues with Expert Precision G37 Q50 (3.7L Engine) and M37 ( Code P0720)
HELLO EVERYONE! WELCOME TO MY CHANNEL. IN THIS VIDEO I WILL SHOW YOU HOW TO FIX ANY G37,Q50 WITH THE 3.7 ENGINE AND M37 WITH TRANMISSION CODE P0720
🔧 Delve into the art of automotive mastery with our in-depth guide, meticulously crafted for enthusiasts and DIY aficionados! This step-by-step walkthrough is your go-to resource for addressing engine issues with unparalleled precision in the G37, Q50 (3.7L Engine), and M37 (Code P0720). From comprehensive diagnostics to hands-on solutions, this guide empowers you to navigate the intricacies of your vehicle's engine health with confidence.
Embark on a journey of knowledge as we unravel the mysteries behind engine troubles, providing detailed insights and expert advice to revitalize your ride's performance. Don't let those engine issues linger - seize control and equip yourself with the skills needed to diagnose and fix them effectively. Join us in transforming your automotive ownership experience, one step at a time. 🚗💡
=================================================================================
Relatedsearch:
Guide to Fixing Engine Issues with Expert Precision G37 Q50 (3.7L Engine) and M37 ( Code P0720)
Fixing Engine Issues with Expert Precision G37 Q50 (3.7L Engine) and M37 ( Code P0720),car repair,toyota,fixing engine issues with expert precision g37 q50,Engine Issues with Expert Precision G37 Q50 (3.7L Engine) and M37 ( Code P0720),( Code P0720),engine issues with expert precision g37 q50,Guide to Fixing Engine Issues with Expert Precision G37 Q50 (3.7L Engine) and M37 ( Code P0720),g37,guide to fixing engine issues with expert precision g37 q50,infiniti,( code p0720)
=================================================================================
Tags:
#EngineFixGuide #G37 #Q50 #M37 #AutomotiveExpertise #CarRepairTips #DIYAutoCare #EngineTroubleshooting #VehicleMaintenance #AutoEnthusiast
#EngineFixGuide #G37 #Q50 #M37 #AutomotiveExpertise #CarRepairTips #DIYAutoCare #EngineTroubleshooting #VehicleMaintenance #AutoEnthusiast #StepByStepGuide #CarPerformance #DIYCarRepair #AutomotiveMastery #RevitalizeYourRide #EngineHealth #DIYAutoExpert #CarKnowledge #EmpowerYourRide #PrecisionFix #CodeP0720 #ExpertCarCare

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 283

@Lamban83 3 месяца назад

just had that code with p0500 on my 2015 Q70, went to mechanic shop and was told to change the transmission. I'm looking for someone knowledgeable like this guy in NYC area , any suggestions?

@rc28ify Год назад

Thx mike tyson

@vsh510 2 месяца назад

Where is your shop located ? And do you have a link on where to purchase valve body

@whymeagain6965 5 дней назад

This is actually a easy change out process, I work on my own vehicles and have done harder jobs than this. All this would take is a lift. Couple bolts unscrew and pop out and pop in 😂

@RuthlessGee День назад

from what im looking at that speed sensor looks like it could be soldered off? if its just 4 connections would it be worth just resoldering a new 1 on?

@annasbayyoud4676 5 дней назад

I got a q40 with the same problem are valve body’s interchangeable?

@borjamena3904 Год назад

Hey bro! After install the new valve body it’s the same process when change the atf? How much fluid ? Thanks for your help!!

@Legends601 Год назад

Where can I get a valve body for a 3.7?

@dvidstx 7 месяцев назад

dealership. Buying used issue could happen again

@josephololade 20 дней назад

Mine is stuck in first gear

@josenavarro2363 7 месяцев назад

I went to a mechanics and make me change the transmission, and I still have the same problem, I won’t pass third, ( only goes to 60). And I spend like 2500 to change the transmission and he wanted another 2500 to “fix it “.

@realyadbowii Год назад

How much does a job like this cost to get done ?

@jweezy8645 Год назад

Hey fam. Just bought a Q60 and the thing drives me nuts with the erratic shift points and other weird quirks lol. Was reading on an Infiniti forum about this issue and seen a lot of people saying that they had their bodies rebuilt by a company named Level 10 and they it completely fixed all the BS with these transmissions. Have you guys ever installed their work or heard of them?

@abodprince1141 Год назад

Thank you very much for the simple explanation 👍

@katoisthebomb14 11 дней назад

ITS THIS FUCKING EASY ????

@Johhndoe815 3 месяца назад

My valve body went out at 127k miles and I never changed the transmission fluid ever and I’m always stepping on the gas😂

@donchito6281 7 месяцев назад

My 2011 M37 Just Bogged Out I Got Gas Got Food As Soon As I Got Home It Cutoff I Turned It On And Put It In Drive It Cuts Off The Moment Its In Drive So I Had Put It In Reverse And Does The Same Thing Its Just Cuts Off But Turning It On In Neutral Or In Park Nothing Happens Engine Runs All That Its Just When In Drive Or Reverse Smh Im Not Sure To Let This Car Go Or Fix It Smh

@joemcmillian9838 Год назад

How would I find the part number for my 2014 Q50 value body? Is it RE7R01A?

@OOpSjm Год назад

Nissan parts website

@edmonmayfield2446 3 месяца назад

Does the valve body have to be programmed

@Kick954 Год назад

Bro your a life saver almost got Rob by a mechanic telling me I have to change my whole transmission🤦🏽‍♂️

@GaryBrown-ii1xe Год назад

I got a 2015 Infiniti Q50 and just had a refurbished valve body installed but the check engine light still giving code 0720. Do the valve body have to be reprogrammed???

@mrblack7303 10 месяцев назад

@@GaryBrown-ii1xe yes they had to on mines

@dvidstx 9 месяцев назад

@@GaryBrown-ii1xe refurbished yes, new from Infiniti dealership no

@Kikoh_lee 8 месяцев назад

@@mrblack7303who reprogrammed it, dealer?

@tsukasawada4490 7 месяцев назад

@@GaryBrown-ii1xehow’s the car so far with the refurbished valve body and how’s u program it ?

@miguellozano2839 Год назад

I replaced my valve body today and my car only drives in reverse . Once in drive i have no movement . Any tips on what could be wrong ?

@squint1011 Год назад

It needs to be reprogrammed.

@202newera 3 месяца назад

I have code P0735 on my g35. It shifts fine until i shift into 5th. Is it the valve body?

@GaryBrown-ii1xe Год назад

I got a 2015 Infiniti Q50 and just had a refurbished valve body installed but the check engine light still giving code 0720. Do the valve body have to be reprogrammed???

@sherricejones332 Год назад

That means the refurbish value body was no good

@sherricejones332 Год назад

Also Infiniti cars are funny so just get a new valve body oem not aftermarket

@sherricejones332 Год назад

Yes you have to reprogram the value body to the car

@DiegoRamirez-pf6iq 6 месяцев назад

Did you end up having to reprogram it? Or was it a faulty refurbished valve body?

@casdisciple 9 месяцев назад

I replaced the body valve and my car is stuck in park?

@michaelgudger8076 9 месяцев назад

I just watched another video where they replaced the output speed sensor n it was not connected to the valve body

@ttinnovations3310 8 месяцев назад

that valve body cost $3000 new =(...

@oldspice-lario 23 дня назад

Yes u guys are right BUT Everybody will get the TCM fault code U1000 The new TCM must be programmed and calibrated. Otherwise the tow mode and self learning shift will not work. Clutch compensation and adaptive shifting also not going to work. U have to use Consult 3 to update the firmware

@Br1cc 18 дней назад

so if i swap a tcm to a different valve body i will need it reprogrammed to work?

@katoisthebomb14 11 дней назад

@@Br1ccnot true my mechanic replaced mine with a new trans and it didn’t need programmed but if it did Nissan or Infiniti will do it for 160$

@doublej1511 Год назад

I have a 3.0 t q60 and im getting that code as well

@bossautomotive7786 Год назад

Speed sensor needs to be replaced

@teaminfiniti4105 Год назад

My car has been in the shop for almost a month waiting on the valve body to get there off back order. It's been a 4 days and i still dont have my car back

@aslays23 7 месяцев назад

Only thing you forgot is while filling up the trans to shift through all the gears and then check the overfill so all the chambers fill up. If not it will be low.

@Zeccr_ Год назад

Hello just a warning and hopefully this helps but if you go from 370z to q50 3.7 tcm or g37 to q50 3.7 Etc. then you need to reprogram it the only way you don't have to do it is from the same year and model because every Tcm/ Valve body and it is unique to the vin of the car

@bossautomotive7786 Год назад

No program need

@ewwitsdavid97 Год назад

Who told u that?

@sigmafit4009 Год назад

@@bossautomotive7786hay where are you located

@joshuanelson2511 3 месяца назад

How about the code p2857 whats the possible cause ?

@jesuspena5366 4 месяца назад

What do you recommend if I got a low coast brake solenoid code and my reverse doesent go into gear at times , I have a 3.7 automatic transmission

@JuiceManSpexs Год назад

Is this the same process for a 370z, like how much time / labor would it take a transmission shop? Also this is the valve body that popped up on eBay when I searched for the 370z. RE7R01A JR710E JR711 It’s very similar to the infinity will this work on my Z?

@bossautomotive7786 Год назад

Same transmission

@heidenvilleda6541 21 день назад

Hey I put anew valve body but now my car won’t turn on parking only on nutral

@coolghoul9 9 дней назад

Everything else works fine?

@CashhCustoms 9 месяцев назад

So you can never just replace the output speed sensor ?

@adeyemiadeleke6895 9 месяцев назад

please this is going on with my car right now what should i do

@rcsatina85 Год назад

How much does the TCM replacement cost?

@phil_8367 9 месяцев назад

I paid $3k here in Tampa earlier this year 😅

@1436Maco Год назад

I'm getting this code but my car just stopped otw to get it fixed and won't start again .. after I get it fixed will it crank or think its something else?

@Agg1802 5 месяцев назад

Did this require to program the TCM? I heard that if it isn’t programmed the car won’t switch gears correctly. Not sure who to believe lol

@joeduran7697 3 месяца назад

Still doing my own research but I believe that if it's the same model then you don't

@johnnyj339 11 месяцев назад

Can i drive after i install new valve body without new fuild ? was planning on driving it to the dealership to get it changed

@Stock.Foreign Год назад

Hey I plan on changing my speed signal sensor have any tips I know you. Didn’t talk about it but I seen the sensor

@michaelgudger8076 9 месяцев назад

When u dropped the trans oil pan down that red white n blue wire is the output speed sensor n it goes from that side up n over to the tail side n its plug n play into the valve body so why did u replace the whole thing u pretty much did more work than u had to

@Jaydieseltv 4 месяца назад

A transmission shop told me the transmission has to get reprogrammed after changing the speed sensor, no matter how many times it gets replaced

@sneakercloset9039 Год назад

Hey man I’ve got p0720 and p0500 this will mean the same right gotta replace the valve body if so where could I purchase one

@bossautomotive7786 Год назад

Ebay

@sneakercloset9039 Год назад

@@bossautomotive7786 so it’s definitely the valve body ?

@TheDjshaun28 Год назад

Did you find the issue ?

@funky3683 5 месяцев назад

@@sneakercloset9039 how’d you get it fixed I got the same codes

@barryjames991 4 месяца назад

Where you at bro what's the location

@thecraftsmanclassicsllc7864 2 месяца назад

Does this require the tcm to be reprogrammed?

@MannyXiao 10 месяцев назад

How common is this issue this is kinda scaring me from purchasing a q50 ive been looking at?

@phil_8367 9 месяцев назад

My 2016 was bulletproof until the sensor died on me earlier this year.

@mosessanchez2817 11 месяцев назад

Installing a 2010 g37 valve body in a 2014 q50 transmission, will go in fine with no programming ? TIA

@Lynwood2888 5 месяцев назад

So if I get 2010 g37 valve body is a newer q50 it well works fine no program needed thanks

@caseylavoie3986 3 месяца назад

about how much fluid did you use to refill?

@christianschuler1733 10 месяцев назад

Is this also compatible with the 3.0?

@IsaiasGarcia-ek7gk Год назад

My car has this right now. Mechanics are telling me only valve body I can get is the genuine infinity one. But I was seeing ones on eBay and other websites that look the same. Would it work or no stick to genuine ?

@bossautomotive7786 Год назад

They will work, but I have had some problems with some being defective

@legalmentejesus3094 Год назад

Why u guys do not change speed sensor only??

@bossautomotive7786 Год назад

Build in to the motherboard. It’s just easier to replace the valve body.

@slickmastajay Год назад

Lol the video showed that it is intergrated into the valve body requiring soldering etc.

@the876ceo 10 месяцев назад

Goodday, does this work for hybrids as well?

@johum187 6 месяцев назад

Where did you bought the replacement

@YTNinoo 3 месяца назад

You have on Amazon and eBay

@johum187 3 месяца назад

Yeah but none have a good review something always fails buyers claim.

@joeyram9557 2 месяца назад

Do you need to change both the TCM and the Valve Body or just the Valve Body?

@katoisthebomb14 11 дней назад

TCM is inside the valvebody on these

@ward7337 7 месяцев назад

Any repogram needed?

@Brideacar 2 месяца назад

I got the same queastion

@barryjames991 4 месяца назад

Where are you located

@Megstarrs84 Год назад

I see your located in GA would you be able to change that part out on my car?

@bossautomotive7786 Год назад

Yes, just google legacy1 automatic that’s my shop name

@ST_TrendTrader Год назад

The speed sensor is integrated to the motherboard- but is the motherboard integrated to the valve body? Meaning can I just swap out the TCM on the valve body, or is it an all in one unit. TY

@bossautomotive7786 Год назад

All in one

@ST_TrendTrader Год назад

@@bossautomotive7786 I removed the valve body today- the TCM is just bolted to it. (4 or 5 hex headed bolts and i 10mm bolt. I don't feel the need to replace the large hunk of 'ported' aluminum I just ordered a rebuilt TCM for installation- (about 1/8 th the price of the new body). The car has 92k on it so- if I get a year out of the part I'll be satisfied...

@TheDjshaun28 Год назад

@@ST_TrendTraderwhere did you buy the part

@ST_TrendTrader Год назад

@@TheDjshaun28 Amazon, I searched "ETC94-110N RE7R01A" The TCM is not all in one with the valve body it just bolts on. I just test drove the car and it's shifting normally and the dreaded P0720 is now cleared. I'm not sure if I need to get it programmed, there's no one around here that does that mobile, so it would take a trip to the dealer. Good Luck!

@gabrielmendoza1371 Год назад

@@ST_TrendTraderone question my friend, did you only change the TCM to solve the problem?

@benjaminpearsey 9 месяцев назад

Hey Boss, we changed the valve body and it will not engage to drive in reverse. Just watch as the rpm goes up but car doesn't move. Any advice ? Hoping to not have to reprogram...

@FTFQUINN 8 месяцев назад

Mine is doing the same, did you figure out the problem ?

@benjaminpearsey 8 месяцев назад

@@FTFQUINN yeah we had to take it to the shop and the transmission was bad. Luckily the warranty covered it but unfortunately the valve body wasn’t enough to fix the issue

@benjaminpearsey 8 месяцев назад

@@FTFQUINN we did get it to go in reverse though but shifting was not smooth and could usually not get into third gear

@FTFQUINN 8 месяцев назад

I actually meant My shifter is stuck in park for some reason.

@jessearellano5664 6 месяцев назад

How much is a refurbished valve body

@tonymagana-y4q 6 месяцев назад

LIKE 3-400

@johnem17 Год назад

Did all of this still getting code. Do I need to clear the check engine?

@KGJR 5 месяцев назад

Did you get this fixed? Was it the TCM?

@joseph1w314 Год назад

Main harness is it supposed to really snap in there and be hard to take out when you put the new valve body in ?

@bossautomotive7786 Год назад

Yea,

@Alexhernandez-xj7mp Год назад

Quick question is the vr and vq valve body the same?

@bossautomotive7786 Год назад

Yea should be

@anthonyfields3856 Год назад

No it’s not

@jakubzak2917 Год назад

Hi, do you have a script regarding which screw fits where? or their length?

@taipanmeserablegoat2416 6 месяцев назад

Take Pictures before removing

@danieljones1763 7 месяцев назад

Is there no gasket?

@vlxnetrap 3 месяца назад

So I have a 2009 g37. I just bought a valve body off of a 2010 g37. Will it need to be reprogrammed ?

@vlxnetrap 3 месяца назад

Plz lemme know 😭🙏🏼

@jayr8534 3 месяца назад

Did it need to be programmed?

@vlxnetrap 3 месяца назад

@@jayr8534 I still dk 🤦🏻‍♂️ have the part but haven’t been able to get a response or any information from anybody

@Turbo.s4 2 месяца назад

You’ll definitely need to get it reprogrammed. Save your old tcm so they can get the information they need off that one to transfer to the used one

@FcFred Год назад

Great info homie. Great work💪

@OscarGonzalez-ix7dj 3 месяца назад

great video my trans stopped working couple weeks ago it moves but wont shift gears it goes 5mph i never do anything with the transmission fluid cause i hear u dont have to do anything to it my q50 has 146k miles i got it wit 80k n it was 2 years old i have a 2015

@AngelLopez-i5j Месяц назад

mines doing the same thing what was the problem ?

@mini2good359 Месяц назад

Yeah mines is too let me know if you found the problem

@OscarGonzalez-ix7dj Месяц назад

yea it was the valve body and speed sensor i had to change i paid $4,450 with labor and taxes now i know change my fluid every 30k miles lol

@OscarGonzalez-ix7dj Месяц назад

i posted the problem

@irv7605 Месяц назад

How much is the labor cost?

@benderbendingrodriguez6697 5 дней назад

Got quoted 700 by Nissan for labor/ programming, fluid and filter included. Gonna buy my valve body online cuz the dealership always marks up major parts.

@damionbennett3593 Год назад

Any problems with the car since replacing valve body ?,did it need programming and can I use same fluid if clean

@bossautomotive7786 Год назад

No problem at all

@damionbennett3593 Год назад

ok thanks for replying boss,I have the same problem sometimes I won’t pass 40 or 50 mph I’m getting code p1734 something about the 7th gear same solution?

@jmatt2703 Год назад

i changed valve body but it’s still not working, not going past 3rd gear and manual not working

@isaacmartinez7634 Год назад

Valve body used or new ?

@jmont124 Год назад

Same here

@bossautomotive7786 Год назад

Bad or defective valve body. I have had the same problem with rebuilt valve bodies

@borjamena3904 Год назад

Hi! Do you recommend change the fluid or can refill with the same fluid? Thanks for you video!!

@bossautomotive7786 Год назад

New fluid always

@borjamena3904 Год назад

Thank you!!

@Motionpressure Год назад

Ty my car is the same

@iberrodriguez6486 Год назад

Do you need to program valve body when in ?

@bossautomotive7786 Год назад

No program require. Just install and go

@gplay1349 Год назад

Maybe with q50 is updated g37 you have to reprogram tcm

@iberrodriguez6486 Год назад

Ok where can I purchase the valve body from

@gplay1349 Год назад

@Iber Rodriguez i bought it and intalled o boy now changes gears but not smooth and new code came in that why i said that it needs reprogram

@iberrodriguez6486 Год назад

@@gplay1349what code you got now

@Flackoxmargiela Год назад

Which plug was the park neutral position switch ?

@bossautomotive7786 Год назад

It’s the two wire plug on the valve body

@Flackoxmargiela Год назад

@@bossautomotive7786 the one with the green tip @2:20?

@aliwooz913 Год назад

nice video bro!!

@denitawilson2244 Год назад

Hey how can I get in contact with you

@bossautomotive7786 Год назад

4703324594

@kingrob9993 Год назад

Appreciate the video man just put in the new valve body and the car works perfectly now but the check engine light is still on. Is there any way to get it to go off?

@bossautomotive7786 Год назад

Did you clear the code?

@JuiceManSpexs Год назад

Same issue I cleared the code, and the car shifts past Third, but my service engine soon light came back on with the same error code p0720. The shop cleared the code, then I did it by un plugging my negative batter terminal.

@kingrob9993 Год назад

@Boss Automotive Yes engine light ended up going off on its own after about 2 - 3 days.( I think it goes off after a certain amount of miles are driven, can't be sure tho.) But everything seems to be working perfect now so Def. Was the valve body. Had the same exact code as in this video as well. "P0720 Output speed sensor".

@kingrob9993 Год назад

@Boss Automotive but thx for the video man saved me a lot of time and money for sure 👍

@gabrielmendoza1371 Год назад

@@kingrob9993still working?

@roberteleam5487 Год назад

How long can u drive like that with the code on

@bossautomotive7786 Год назад

Not long,

@g37holly34 Год назад

Does the valve body have to be reprogrammed ?

@bossautomotive7786 Год назад

@ajrichredemption Год назад

Does the valve body for the q50 have to be programmed once a new one has been installed

@bossautomotive7786 Год назад

No, plug and play

@swav100 11 месяцев назад

Bs ya you have to program

@dxvetg Год назад

I changed the valve body on the car but now it won’t come out of park. Is that because of the gear shift being out of place as you said ?

@bossautomotive7786 Год назад

Check the neutral safety switch connector

@_JosephEbanks Год назад

I'm having the same problem. Did you get it fixed?

@dxvetg Год назад

@@_JosephEbanks I ended up taking it to the dealer and they charged me for the shifter assembly. I’m not sure the what the problem was because the mechanic I took it to tried pulling it back and ended up breaking it.

@_JosephEbanks Год назад

I think I did the same thing. It'll only start in neutral now smh. Thanks for the reply man@@dxvetg

@israelchavez1815 Год назад

The perfect video I needed

@noesantos2732 Год назад

Was the valve body that you installed new from the dealership?

@bossautomotive7786 Год назад

No, I had another transmission, but you can buy it new I have installed new ones

@noesantos2732 Год назад

But I’m guessing with a new one I would have to get it reprogrammed and with a used or refurbished one I wouldn’t have to?

@dvidstx 9 месяцев назад

just got valve body replace on my 15 Q50, got same code. Good video tho ! Infiniti put out a bulletin about this !

@jayy7712 8 месяцев назад

How much?

@dvidstx 7 месяцев назад

@@jayy7712 $2400

@mastermechanicfelipe4641 2 месяца назад

So replacing the valve body entirely did NOT fix the issue? Any updates? Please let us know how you fixed it! Thanks.

@jsallday2573 Месяц назад

Where did you get your valve body from?

@miguelguerreroayala1313 6 месяцев назад

So I just bought a 2017 Q50s Red sport, should I expect this valve body failure?

@qwazardinero2699 5 месяцев назад

No keep up with fluid and battery.

@AS-wd5et 5 месяцев назад

I kept up with fluid and battery. I now have to replace the valve body.

@qwazardinero2699 5 месяцев назад

@@AS-wd5et I did as well on my qx70 shit still went out so Yeah your right could be manufactured poorly as well they go at around 80k miles apparently we're not the only ones they were on backorder last year and highly inflated on pricing happened to me.

@hc7786 Год назад

Not entirely true. The valve body only goes bad if an Infiniti owner does not change their transmission fluid every 30-40k miles. Or never changed it at all. It will be a long time before it wears out only if you change your transmission fluid correctly. there’s some people who have had 130 k plus miles and change their fluid every 30k miles and no issues But typically this code is for the vehicle speed sensor which is a tad bit complicated to get to and most people change the body and not the sensor. Some cases you change both. The valve body has and input and output intergraded into the body. It’s just so expensive for the oem smh. But once changed it will last a long time before it ever goes. Just change your fluid people. Correctly.

@Yhappp Год назад

Agree, I think these go out because of the heat from the burnt up fluid theres a reason most of these go out at 60k, infiniti recommends changing your fluid every 30k on these vqs. To be fair infiniti does also claim lifetime fluid which people actually believe in.

@bossautomotive7786 Год назад

Valve don’t go bad, just the speed sensor, which is integrated

@bossautomotive7786 Год назад

Valve body**

@Yhappp Год назад

@@bossautomotive7786 such an easy solder

@MondezDwiz Год назад

So if I am already getting the code. Getting the fluid changed wouldn’t do anything?

@jorgevilla3199 Год назад

Does it need to be in P or N when you remove the valve bdy

@coolghoul9 Год назад

dont think it matters but you have to make sure the linkage is in on the manual valve slot

@bossautomotive7786 Год назад

Exactly.

@akdov9149 Год назад

where do you get a valve body from ? if i get one from ebay do i have to reprogram it ?

@hammadahmed3633 11 месяцев назад

You might have to unless the part is out of q50, but if you get new one from factory around 1500 it’s plug and play, no need to reprogram

@montehabas9363 Год назад

Please bro, I need your help. I just changed the valve body on my Q 50 and it’s still doing the same do you think it’s a bad valve body or the transmission is bad

@iberrodriguez6486 Год назад

Did u figure it out

@montehabas9363 Год назад

No, I’m still trying to figure some out

@Yhappp Год назад

@@montehabas9363 did it give you the p07 code to begin with? Also program your valve body

@montehabas9363 Год назад

@@Yhappp yes, it did give me the code after install the new valve body and it’s also giving me a cold cold TCM

@bossautomotive7786 Год назад

Did you figure it out?

@Bernardahossey Год назад

Did have to program the car after you replace the valve body?

@bossautomotive7786 Год назад

No, you don’t have to plug and play

@sneakercloset9039 Год назад

Part just came would it need to be reprogrammed after I replace it ?

@bossautomotive7786 Год назад

You shouldn’t have to program it.

@hrheather1 Год назад

How much did u pay for ur valve body? Im just iffy on buying something off eBay and it not being the right part for my car. Almost $400-$580. And have u got it fixed yet?

@sneakercloset9039 Год назад

@@hrheather1 I can send you the link with the guy i delt with

@sneakercloset9039 Год назад

@@hrheather1 I just got off the phone with the shop it’s supposed to be done tomorrow

@ha6611 Год назад

The guy I took it to said he need to program it. Is that something that needs to be done? He's charging extra for programming.

@ajrichredemption Год назад

Where are you guys located

@bossautomotive7786 Год назад

Lake city GA Legacy1 automotive

@ajrichredemption Год назад

@@bossautomotive7786 I just took my 2018 Q50 to the dealership and they told me that my Electronic Valve Body needs to be changed…. How much do you charge to change one out…. The dealership was outrageous🤦🏾‍♂️

@isaiahtaylor2651 Год назад

@@ajrichredemption bro...wut price they quote you

@coryjenkins4051 Год назад

@@bossautomotive7786 what does it mean if the valve body is not being detected after being changed ? Does it need to be reprogrammed? I was told the problem most likely wasn’t the valve body… that I most likely should have had the output speed sensor replaced instead of valve body…. What do you think about it?

@maui3302 Год назад

Hi do you remember how many quarts it took to fill the transmission back up with ATF? Planning on doing this in a couple days

@bossautomotive7786 Год назад

Like 10

@damionbennett3593 Год назад

I’m getting code P1734 3:25 any info on that same solution?

@bossautomotive7786 Год назад

Pressure control solenoid B" Last time I had the p1734 code we replaced the valve body

@edoardorobles4650 Год назад

Where could I buy the valve body ?

@bossautomotive7786 Год назад

You can buy them on eBay

@justinpughTV Год назад

How long did it take you to do this start to finish?

@bossautomotive7786 Год назад

About an hour and the half

@ST_TrendTrader Год назад

Garage Mechanic- Car on blocks- Little clearance room to move- 6.5 hours! Ugh!

@reneflores1508 Год назад

I replaced the valve body but now the car don’t go forward, only reverse 😢😢

@bossautomotive7786 Год назад

Go back over your work and check to make sure you installed the valve body correctly, if not valve body is also bad

@gplay1349 Год назад

You fixed ? Any check engine light?

@iberrodriguez6486 Год назад

Did you fix the issue??

@gplay1349 Год назад

@Iber Rodriguez kinda but not completely looking for answer breaking my head on internet

@SavageDre Год назад

@@gplay1349Have you found the answer? Same happened to me. Very rough to switch from reverse to neutral and wont go into drive. I think the manual valve was aligned correctly with the valve body. Does anyone have an answer?