Gyeon CanCoat For The BMW E92 M3 

quick video...16 minutes hahaha love the obsessiveness. so glad i stumbled on this channel, thanks for all the content, awaiting my OG MOSMATIC! so excited.

I wouldn’t have been spraying Eraser around the panels with Can Coat on them already. I’m sure it floated in the air onto those coated panels.

Cracks me up when you get an F 11 RU-vid advertisement right before obsessed garage plays 🤨

Menzerna Powerlock for me followed by GTechniq C2. Boom 💥 Slick to the touch and the beauty is you can layer C2. 👍🏼

Definitely 12+ months when properly maintained. I have a couple customers that I used it on and that I maintain and it has help up great

Whats the difference with that and the 1000 other si02 coatings/toppers ? For a few months you could of done Hydro2 or Hydro Blue no?

I've been using it on client's cars for a month now. It is amazing so far with two layers!

It looks better after the cure, car craft has a video comparing it to CQ Lite and it makes the paint darker.

I just applied Cancoat a few weeks back. Application was super easy. Used the towel for the first coat, let cure for one hour. I then used a microfiber applicator for the second coat and I liked that better. It felt like I was getting better coverage using a back and forth application like applying a traditional coating. I really like the product but your right, it didn’t wow me for a much different look. I let the 2 coats be until the first wash. After the first wash I’m using Bead Maker as a topper. The water beading action is unbelievable, that first wash was crazy. Now with the Bead maker topper it’s not much different. I’m enjoying the combo. It’s on my daily driver and I like to try different things or touch up with a light polish maybe every 6 months, so this fit the bill. Please follow up with your thoughts during a wash and talk.

I have had great results with gyeon mohs and gyeon pure, I would say those products have a very similar finish and feel to CSL paired with Exo ( have used all 3 coatings I am mentioning here). I dont think I would spend the time to apply something like cancoat when it lacks many of the properties I would be looking for if I took the time to polish and prep for a coating.

What's that large area of raised orange peel being highlighted just below the mirror on the drivers side? Just a weird reflection of the mirror?

I've used CanCoat several times, first time with towel, use 3 sprays, no more than 2 afterwards. Also, change out to new area of towel after a panel or 2. Think you used way too much product. Is the lift clean? ugh...I cringed every time you threw the towel down on it and re-used it. I apply 2nd coat after 4 hours.

Do a second coat is very smart. Give 48hrs to cure. I also used Gyeon cute or reload and applied 4 hrs after the second coat.

Not sure if you mentioned this or not in the video. Did you end up using their primer coat prior apply this? Thx

The can coat does look better after it has properly cured. Without a shadow of a doubt. But add about 25% onto Gyeon's claimed full cure time. At least in the UK anyway. If you want to top it aswell, I'd highly recommend a coat of Tac Systems Shinee Wax! Man it REALLY shines! The only other thing I've seen give so much depth and clarity was Swissvax Concorso personally.

I tried to remove CQuartz UK with Meguiars Wash Plus because I could not find my compound - Wash Plus removed it with ease!

Like this product, really easy on off last a long time.

I buffed and polished my whole car 2 weeks ago concentrating mostly on the hood and roof because they had really bad water spots and it came out amazing! cleaned the car really good and applied a ceramic coat. just noticed yesterday that the water spots came back and i'm so frustrated! I'm going to try your technique of using a heat gun and polishing to hopefully get rid of them for good.

Good product for a quick protection ! 👍 👍

Check out Fictech One from France. Adds the slickness you prefer and same spray on application.

You will love this.

Interlagos Blue M's are sooo good, reminds me of the E36 Avus blue M3s

Love the M3 and the color. 🤞that the water spots don’t show back up.

4:35 You're a good detailer. That Beemer is similar to a mirror.

Is can coat the same as many other coatings in the fact it's best to keep clean and dry over night if possible?

Thanks for reviewing this product for us. I also have an Interlagos blue car.... I for one, am not Impressed with “water properties” so I will give this a pass. I want to see a difference in the paint after it’s applied. Not wait for a wash and get excited for water beads!!!! I want to say that this does nothing, and we paying a price for it, and glorifying it... but I won’t...

but does it do anything except helping with waterspots?

May I ask why the move from Powerlock and Collinite? Just in an attempt to see "whats out there"?

While watching the video, I could see I difference in gloss after you applied it

CanCoat has crazy hydrophobic properties as well.

What would you use for multi year protection?

Do you or anybody use C2v3 as a maintenance product on CSL +exo?

Man I love this stuff. The perfect blend of ease of application and durability. Been using it for the last 3 years with WetCoat as a maintenance coat every month. The results are really really impressive. FYI: Applying with a suede applicator instead does indeed affect durability and clarity positively. Also I found that applying it one panel at a time generally worked for me, with the only panel I split in two being the hood.

You will be surprised at how well it holds up. I saw 15 months out of it. To add a second coat it’s a 1 hour wait time per Jeff from Gyeon when I asked him. Give it time to cure and set up. Just give it a shot and don’t worry about slickness and all that other stuff. In the end it’s a temporary solution.

Hi Matt! How do you find the Gyeon Can Coat?

What pressol bottle (eraser) is Matt using in this vid.... I dont remember ever seeing that color combo in the store... hmmm

2:14 The product doesn't include a respirator mask?

Matt please try out Mckees Hydro Blue you will not be disappointed.

So it's basically Geon's version of GTechniq C2v3 or CarPro Reload?

If you didn't use Bead Maker as a 'topper/drying aid' and you didn't use coatings, what 'topper/drying aid' would you use? Thanks.

That’s how Gyeon products work Matt - Same with Gyeon Cure Spray Sealant . You can’t visually see how much product you’re putting on - it isn’t visible - but LESS is more with Gyeon. 1-2 sprays into a microfibre towel will cover an entire large panel. No need to be splitting up door panels into 3’s.

I applied can coat to about 1/2 a dozen cars and I still have enough in the bottle to do one more. One car has been going for 6 months and show no signs of coating failure yet. Super easy to apply with one microfiber towel. Just wipe on, flip and wipe off. I did get a few high spots - they are hard to see initially. I think it would be better to do it as you are, with one applicator towel and a removal towel. I just hate wasting towels as they need to be thrown away after can coat usage.

Have you tried The Last Coat v2? It's cheaper and actually gives you depth and clarity while leaving the paint super slick, it applies the same too. You could get a year easy if maintained properly, especially if your car is garaged.

14:53 remnant of a waterspot?

Have you/would ever try Gyeon Syncro ?

I'm leaning towards buying Gyeon Can Coat because: 1. ease of application. 2. Relative low cost. 3. It seems to protect the paint very well. After watching some videos and reading comments it seems that over spray is an issue for some people. Bottom line: Keep that cloth close to the sprayer and point it away from the car.

6 months at the most I suppose like the last coat v2. But keep us informed on how long this will hold/last? haha almost removed the can coat with eraser there :P. I doubt you're going to like this product though. I used the Last coat v2, but I'm going to use a ceramic coating, I'm no fan of these SiO2 spray sealants, but it's better than nothing on the clear for sure. Also, keep in mind, these SiO2 products need to cure as well. But knowing you, you're not going to like this.

just put a layer of beadmaker on top of it and you will have the slickness and the depth with the benefit of cancoat !

I love Gyeon products but I can’t buy into the aerosol can method

I tried to explain to a few people that coatings and sealants all need to have a good tactile experience for me to like it...it's just a personal preference. I want to feel the slickness and be able to see at least a small change in gloss. The protection may be there but if it feels like nothing is there then it's something I won't like.

As great as coatings appear to be (I've personally never used one) I just can't get myself away from traditional waxes like the power lock/collinite combo. Looks great, feels great, and I enjoy doing it.

most coatings dont give instant slickness.btw im happy you are not that obsessed anymore since you use carpro eraser before gyeon can coat instead of Gyeon Cure,hehe

My car never stayed as clean as when I had Can Coat on it.

Can't decide between getting Can Coat or Moonlight. Which do you prefer or is better? Easier to apply/lasts longer? Thanks

I've been very disappointed with ceramic toppers in general, whether it be Reload, Cancoat, Overcoat from Kamikaze, etc... Its interesting, but Carpro Elixir has probably been the easiest to use by far (my opinion only)

I have similar rims to you but in gloss black. All those little V's are a NIGHTMARE to clean!

How does this compare to CarPro Lite?

If you’re looking for a slick sio2 sealant give Owners pride ceramic detailer a try.

Matt- I would use this as a first step of a three-step process. After polishing and correcting the paint- I would then use this as a paint sealant. Then lay down a nice wax for gloss and then lay down bead maker as your sacrificial layer.

Responding to your comment at 2:45 - you won’t be able to get this off without a lot of effort. But it’s great so you shouldn’t have to.

I'll stick to angelpolish master sealant

Prefer Megs Ultimate Fast Finish on a car without a ceramic coating

😍

Why would you want the paint to look different? 🤔 that's exactly what I want.

Génial🙏🎩🇵🇹🇺🇸

I think the M3 deserves CSU+EXO

Koch chemie fse loves to destroy waterspots, get some flower

First 👌

Second coat is 4 hours later.

You don't 'gain' anything from appyling a coating to a well polished car. Typically you lose gloss so in that respect if you are not noticing any difference from applying the cancoat, that's a good thing. Can I suggest you try being a little more enthusiastic as well, never seen someone moan so much during a detailing video.

Do you ever just get the feeling your just spending money on constant useless layers of protection for your car?

So sad seeing these "drivers cars" not getting driven to their full potential.

Nothing lasts 6 months on a daily driven car belonging to a common man except a real ceramic coating that actually forms a glass layer on top of the paint/clear coat.