One coating for all surfaces? - The Detailing Guru 

Thank you for watching and giving us your feedback. Much appreciated and glad you like the products. Enjoy. Ciao, Y.

Thanks! Regards, Y.

Thank you for feedback. Glad you like it and great idea to put it on top of Q2 ONE. You will be surprised. Regards, Y.

Thanks. Glad you like them. Regards, Y.

It is and for me a must have on every shelf. Regards, Y.

I just ordered Wet Coat and I know it will be great. I used a well known competitor's product and had really good results with it too. Gyeon Wet Coat seems like it would be even better. I only ordered the small bottle (500 ML) to get me started. I realize that a micro fiber cloth can help get better coverage. Of course don't let it sit any longer than it takes to apply it. Let it sit too long and it may stain! I know that things like this are difficult to clean off when they stain too.

6 meses de duração MÍNIMA, tenho clientes que já apliquei a 9 meses e ainda tem bastante brilho, repelência e toque liso, porém sempre lavamos com produtos e técnicas corretas, este produto é um coringa e um excelente custo benefício

Start saving, more are on the way 😉. Regards, Y.

It’s a true ceramic coating that will bond and anchor in the pores of the clearcoat, what sometimes is called a glass layer. Regards, Y.

@@GYEON_official thank you so much for the prompt reply. That's all I needed to hear for applying this product. It's super easy to use and so cost effective if it does what it says it does. Just keep applying it every 6 months or when it starts fading.

It will harden although you can wash them immediately after application and use them for other purposes, for example, wheel arches.. Regards, Y.

Hi, a secondary towel is not the final wipe if you ask me. But as your last towel a big suede is what I always have been teaching. A secure final wipe. After a couple of weeks a carnauba wax doesn’t make much sense. Rather do it after 12h before the car goes out. Gyeon Wax is absolutely no issue at all and performs fantastic. Regards, Y.

@@GYEON_official hi Yves, great ! That is kind of what I meant : a final wipe with a big suede cloth . Just picked up a new supply of Gyeon at oudenaarde Wax-it 👍🏻

@@GYEON_official Hi Yves, just a quick question about the Q2 Wax: the 12 hour rule also applies with the other Evo coatings (One, Pure, etc)? The manual says after 14 days or the first wash, but I thought I would ask for a second opinion because I see a lot of detailer stories reposted on Gyeon's Instagram where they apply it over the coating before hading over the car to the customer. Thanks!

Hi, great to hear. Claying (friction) will diminish it depending how aggressive you clay. I would check the performance after claying and a wash with Q²M Restart shampoo. If you are still happy with the result, don’t coat yet but maybe a good Q²M Cure application will be beneficial. Regards, Y.

@@GYEON_official thanks! I will pick up a bottle of the Cure. I'm already washing with the Bathe+ each time. In comparing Bathe+ and Restart, is one recommended for regular cleanings more than the other? I really appreciate the dialogue you have with us on these videos!

Once every 3 washes a thorough Q²M Restart wash is what I recommend. Regards, Y.

Stay tuned for some more Gyeon news very soon. You might like it 😉. Regards, Y.

Yes you Can coat on top of most true Ceramic coatings. Of course in terms if performance starting from a clean “sheet” is always the ideal way to go but don’t be afraid to try. Regards, Y.

Yes you can. At least wait till the next day to apply Q²M Cure or Q²M CeramicDetailer. Regards, Y.

I bought can coat evo and will apply in a garage this weekend. Temp will be mid 70s and humidity in mid 70s, will these conditions be okay? Thank you!!

Yes, nothing to worry about. Regards, Y.

@@GYEON_official Coated my car with Can-coat yesterday and let it cure in a friends garage for 28 hours. Applied ceramic detailer and brought it home, looks fantastic!

All true ceramic coatings need a drying period and have a curing time. To prevent issues and have maximum performance it is advisable to keep the car dry the first 12h. That is a minimum, the longer, the better actually. But in warm climates with almost no rain it’s no problem to go out earlier. Regards, Y.

CeramicDetailer is a great choice. If you want something special, put Q2 Wax on top. ✌🏻 Regards, Y.

It will add depth but no worries. Just make sure you have an even coverage. Regards, Y.

Hi, for your satin wrap I would suggest to use or Q²Matte Evo coating. This will give your wrap a richer colour without making it glossy. It’s an easy wipe on, wipe off application. Have a look here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XMdOj-B3__0.html Regards, Y.

Not necessarily but a chemical decontamination is a must. It’s all about your expectations but technically it’s not a problem. Regards, Y.

We have Q2 MATTE which will work great. Maintain it with Q2M PPF Maintain and it will look amazing. Regards, Y.

You can apply apply Q²M Cure the day after if you want. Regards, Y.

Absolutely. You will be amazed by the end result. Take your time and use enough towels. Better be safe then sorry. Regards, Y.

@@GYEON_official Are the towels used with can coat to be thrown away when finished?

You can reuse them but I would strongly suggest NOT to do it on paint but use them for the dirty jobs, wheelarches, exhausts, etc. Regards, Y.

Yes it is! Regards, Y.

Up to you but I wouldn’t put simething on my car that will boost gloss when there are still defects in the paint. It will accentuate them. A thorough decontamination is a must and I most cases claying is as well, so when you start claying then polishing is the next thing. Regards, Y.

The first 24h and even the first 2 to 3 weeks are crucial for a coating and it’s performance. Wait a minimum of 2-4 hours to apply Q²M Cure on top of Q²CanCoat EVO. Q²M CeramicDetailer is a perfect choice as topper or drying aid. Regards, Y.

After 2 to 4 hours can ceramic detailer be used INSTEAD of Cure? Thx!! (I already have ceramic detailer)

No. Regards, Y.

Damp nights are never good for a coating! In your case I would stick to Q2 Wax and reapply every 4 months. You really will love it. It’s fast, easy on and off and beads like crazy. Regards, Y.

@@GYEON_official the problem with damp nights is only until the coating has cured, right ?

Yes it is. But curing of a coating can take 3 weeks depending climate and type of coating. Regards, Y.

@@GYEON_official good point 👍 I have Opti-Coat Pro+ on one of my cars and I would like to use CanCoat as a durable sacrificial layer, but I have two questions: 1) I know the car has to be decontaminated prior to being coated and has to be kept indoor after coating. But what will actually happen if there is some contamination or prior protection (like bathe+\WetCoat) left on the paint or if an emergency comes up and you have to drive the car through heavy rain right after coating. Is it just the durability that will be affected or can it cause damage ? 2) Will any missed high spots or accidental overspray cause permanent damage or will it just wear off within 6-12 months with the rest of the CanCoat layer ? I will be careful, but shit happens and I just want to be ready for worst case scenarios 😅

No permanent damage can be made with our paint coatings. To early or to quick in contact will make the coating less performing and the effect of permanent waterspotting will be higher. Regards, Y.

Yes. Q²CanCoat EVO will harden up for sure which will make the towel not absorbing. It can be used for other tasks but I would never use is on paint anymore. Regards, Y.

@@GYEON_official Thank you for the info. I learn a lot from your videos for my DIY projects. Keep up with the great content.

This combo will look bonkers for sure on white but remember that the polishing and prep stage is where the key lies. Regards, Y.

@@GYEON_official thank you

What polish do you recommend, sir? Sonax Perfect Finish or 3D?

Non off the above. Gyeon compounds are my way to go when it comes polishing before a coating application. I would finish with Q²M Primer as your final stage. Cutting stage depends on the type of defects but Q²M Compound with a blue Gyeon polishing pad is a good start. Regards, Y.

@@GYEON_official thank you, sir

Q²Mohs EVO is spectacular but it’s all about options vs expectations and what you are willing to pay. Regards, Y.

It can. Regards, Y.

I can’t agree more! Regards, Y.

You can but we have a coating that is specially formulated for matte paint and wraps, maybe worth a look. Regards, Y.

I would suggest to use more then one. The large coating applicators will do the job faster and have an inside liner to prevent the product of soaking into the foam but 2 pieces for a normal car is a minimum. Regards, Y.

@@GYEON_official Thanks!

Can i reuse these 2 applicators for another car if i wash them after the first car?

No, I would not do that at all. Coating will harden up in the fibres and the last thing you want is a hard applicator which might scratch your freshly polished paint. Regards, Y.

Try not to wash it with strong chemicals in the first week. Depending your climate common sense is always good. After “sand rain”, rinse and if needed wash the car with out neutral shampoo Q2M Bathe and dry to avoid heavy waterspotting for example. Regards, Y.

@@GYEON_official ok, thanks for the reply. Can i apply a second layer of cancoat 1 week on after washing?

Yes you can but there is no need to do that. I’d rather put a layer of Q2Wax over it after 24h. Regards, Y.

@@GYEON_official cheers, thanks for your help 👍🏻

Because on the side glass you don’t have wipers that can smear it out. Regards, Y.

@@GYEON_official so if you were to install CanCoat on the windshield but let it fully cure before using the wipers, would there still be a principa potential issue with smearing?

Yes and not only smearing but also wear because it degrades differently when friction is applied on glass then Q²View or Q²QuickView. It’s chemically a totally different product. Regards, Y.

@@GYEON_official got it, ok thank you

Yes you can(coat) PPF. 😊 Regards, Y.

How about matte PPF?

Thank you for your concern. I do wear gloves most of the time but we are all human and my main concern while filming is the correct explanation and usage for our viewers, rather then my own safety but I will try to be more cautious in the future. Regards, Y.