Harley Davidson Flush Mount Fuel Gauge - 2014 Street Bob

Подписаться 459

Просмотров 72 тыс.

50% 1

Installation of the Harley Davidson Flush Mount Fuel Gauge (Part Number 75327-09C) on my Dynamics's Street Bob. *I am not a professional!* My name is Chris. I ride Harleys. I'm not a moto vlogger but enjoy recording my rides and any maintenance I do on my bikes. I use a GoPro session 5, GoPro Hero4 Silver and a Canon SX720HS to do my recordings. I also sometimes use a TASCOM DR-05 to record voice. I don't always have time to upload as work gets in the way but I hope you enjoy what you see. PLEASE SUBSCRIBE so you can be alerted when I upload new videos!

Авто/Мото

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@andrewmedeiros1021 3 года назад

Anyone watching, use smaller pieces of tape so the beauty ring itself is centered around the fuel cap. Also…. Look up how those pins retain into connectors. Just jamming a paper clip in and out may result in luck, but it’s very simple if you just RU-vid how to remove connector pins. If you ever want to revert back to stock you’ll have to re-solder new pins back on to the wires. Great video bro

@Vince-do3yu 5 лет назад

Thank you for posting the part number. I wasn't finding anything to fit my dyna until I came across your video!

@dcdell2008 6 лет назад

Very nice install guide on the flush mount furl kit...I'm getting ready to install on my 2018 Road King Special...thanks for sharing

@vitoraimondi2626 5 лет назад

Way to go Chris. Great install video!

@warfire24 6 лет назад

Thanks for this video. Just what I needed to figure out for my Fat Bob.

@twilliamsusmc 3 года назад

Like your tape line up method better then others I’ve seen. Taking pictures is always good.

@numberxx7 6 лет назад

HI Chris, I am about to install these parts (flush fuel fill/digital gage to my '17 FXDLS, I assume, it's very like what you have shown.. Thank you

@JuanderBoyMusic 4 года назад

Great video! To the point and very detailed. Thanks for sharing

@MotoNorseman 4 года назад

JuanderBoyMusic Thank you!

@tigermuff3683 7 лет назад

Good video. Thank you very much. Greetings from Germany.

@MotoNorseman 7 лет назад

Thank you!

@jasonmerrill152 4 года назад

Anyone know why this will not fit a 2008 Harley-Davidson fxdl ?

@Manamejeff625 3 года назад

Thanks for the video. This helped me a lot. Well put together video , great youtuber ! :)

@MotoNorseman 3 года назад

Thank you!

@SamJonsson-uk9zz 10 месяцев назад

Hey do anyone know if you just the buy the ”cover-glass” for this item ?

@scott_0492 5 лет назад

great video!!!! just bought my wide glide few weeks ago and found this video very helpul, how has the gas cap and fuel gauge been holding up?

@MotoNorseman 5 лет назад

Scott Ortega Thanks for watching! The gas cap and fuel gauge both still look and operate like they’re new.

@johnnocella 5 лет назад

Can you tell what brand and model bars you have on your bike? I am guessing you were able to use stock wires and cables? Looks great.

@MotoNorseman 5 лет назад

Johnny No The bars are JP Cycle branded bars. 14”. Same wires, new cables.

@pvampman 6 лет назад

I'm trying to find out if one will work with a 2003 fatboy carburetor

@ryandunbar1314 6 лет назад

Andrew Castaneda works on my 2001 softail

@jasonp3896 4 года назад

Hey good video. How has the gas cap "ring" with adhesive back lasted? Has it tried peeling up since you installed this?

@MotoNorseman 4 года назад

Jason P It’s still stuck on there really good. That said, I don’t ride it a lot and it’s parked in the garage most of the time. I’m not a huge fan of the plastic but there isn’t really an alternative if you want flush mount. Thanks for watching!

@greg3211 2 года назад

Mine didn't stick down properly after install so not ideal

@numberxx7 6 лет назад

Thanks, I am thinking about doing this to '17 FXDLS, but why disconnect the battery? if you keep ignition off, you should have no "juice" going through any Fuel gage circuitry.. cheers

@CunoWiederhold Год назад

Great video! I have a 2014 Fat Bob and will do the same thing. On another note, how do you install footboards onto a Street Bob? I'm certain that the frames are the same and already have the mounting gussets welded to the frame. Thanks!

@MotoNorseman Год назад

I used HD floorboards part number 50500247. They are for the Dyna switchback but should work with any Dyna. The only limitation would be if your exhaust covers the mid -control mounting points. You put 2004 model year Fat Bob but I think you mean 2014.

@CunoWiederhold Год назад

@@MotoNorseman Thanks! Yeah, I did mean 2014, thanks for catching it! I've been wanting to do this for a long time. New bikes are way too expensive, so it's better to accessorize your bike.

@jeffreyparker130 3 года назад

Thanks for the post! I’ve got a 2015 Dyna Streetbob. Is there a difference between the part #75327-09D and 75327-09C?

@MotoNorseman 3 года назад

It looks like the C part number might be a part number used by Intermountain Harley in Utah? I think they’re the same item. But not 100% certain.

@jeffreyparker130 3 года назад

Moto Norseman thank you!

@goosenek8919 3 года назад

Its just the newest version

@TheHighestGodisGood 4 года назад

Great job on the install footage and details. Subbed :)

@mariod5673 Год назад

11/22 I just installed this and it was very easy Unfortunately the led indicator shows I am low and my low range indicator is on. I have wired and retired with same results Any idea what I may have done wrong

@MotoNorseman Год назад

I assume it was reading correctly before? Depending on the age of the bike, the fuel tank sender could be stuck. Make sure the tank is full and then ride around. Also, pull the main fuse and put it back in.

@TheNostorian 2 года назад

Whould you say this gauge is more, the same or less accurate as the original analoge gauge?

@MotoNorseman 2 года назад

The analog has the needle that gives a more accurate reading as the fuel gets below that 1/4 mark. Otherwise I think it reads full, 3/4, 1/2, and 1/4 pretty accurately.

@jeffanastos 2 года назад

Do you know what part nunber for a 2007 in black please i cant find it anywhhere

@MotoNorseman 2 года назад

I think they only have the chrome version for the older Dynas. I’m not sure what the difference is between the older and newer versions.

@robertbass6039 3 года назад

Good Video . Can I assume that your bike had a fuel gauge before and you just wanted a flush mount gauge?

@MotoNorseman 3 года назад

That’s correct. Just wanted the flush mount.

@NothingToSeeHere12345 6 лет назад

My analog fuel gauge consistently shows lower fuel than is actually in the bike. Did you have that problem before the switch, and if so, is the new one any more accurate?

@MotoNorseman 6 лет назад

I never really noticed but I think that may be on purpose so you fill up before you run out of fuel.

@douglasrf 2 года назад

I need one of these for my fat boy 2011 low. Could you send the link where u got these?

@MotoNorseman 2 года назад

75027-08D is the part number according to the Harley website. You can find it at www.surdyke.com/PartsMain.aspx?PartNumber=75027-08D&SubCatID=&CatID=&Name=&CatName=

@irakli9604 5 лет назад

They look good on it's on but silver blends better with denim in my opinion.

@MotoNorseman 5 лет назад

I wish they would have has a matte black.

@chabib23 5 лет назад

Why wont these work on a 2006 street bob? The tanks are the same?

@MotoNorseman 5 лет назад

I'm not exactly sure but Harley part 62910-06C fits the 06 but it's chrome.

@chabib23 5 лет назад

@@MotoNorseman thanks!

@alexcormack3843 4 года назад

Dude sounds exactly like Tom Green

@SweatyWalrus 4 дня назад

YES!

@joeykohout8710 7 лет назад

how much is that kit?

@MotoNorseman 6 лет назад

$170 from www.surdyke.com ($210 from the Harley website)

@fearlessr6s 3 года назад

Very nice but for me is hard to justify spending $180 on them. Sucks there doesn't seem like there's much else out there.

@crewgadjy 5 лет назад

Is there a chrome version of this, would be far easier to read than the analogue one that comes on the bike.

@MotoNorseman 5 лет назад

There is a chrome version on the Harley Website. There are a couple different ones based on the year/model of your harley.

@chadgaudiosi 6 лет назад

Where'd you get that horn cover?

@MotoNorseman 6 лет назад

I got the horn cover from some vendor at some bike fest.

@travelinben1966 Год назад

Never liked those flush mount caps.Hard to turn the center cap a turn to get it to pop up so you can unscrew it when your hands are sweaty.Nothing to grab.

@MotoNorseman Год назад

I agree. And it feels like cheap plastic.

@msi4226 3 года назад

Dont this fuel gauge have sender?

@MotoNorseman 3 года назад

The sender is inside the tank.

@msi4226 3 года назад

@@MotoNorseman Thank you kind Sir.

@kombijr 2 года назад

Lmao you gave up Real quick and just cut the wires 🤣

@flatroc1 2 года назад

There Must be a more advanced tool than a paper clip for removing wire connectors. in all my years of motorcycle and auto work, i've never been able to remove them. Alway end up cutting and splicing the wires. 😡

@murphfee617 5 лет назад

5:55 boy I can easily tell, your not a real man "A Wrench" that'd be called a nut driver Sir, NOT A WRENCH Jesus Cripes

@MotoNorseman 5 лет назад

You made it to 5:55! Thanks for watching!

@knockoutartist101 5 лет назад

@@MotoNorseman annnnnnnnnnnnnnd that's why he only has 3 subscribers... smh

@UncleJDCarp 4 года назад

Boy I can easily tell YOU'RE not a real man. Real men don't knock others down, they lift them up. Insulting people doesn't define THEM, it only defines YOU. Where's all your tip-top perfect instructional videos showing people how a real man does it? Sad, limited vision of an emotionally small & insecure man.

@msi4226 3 года назад

If you want to educate or impart knowledge onto others just be humble and nice don't have to use caps or calling Jesus, its actually easy if you are a real man.