Harley Davidson Iron 883 battery change DIY

Подписаться 217

Просмотров 34 тыс.

50% 1

What do you do when you leave you accidently leave your bike on overnight? You make a video on how to replace the battery on your Harley Davidson Iron 883! Join me on my first attempt at changing the battery on a Harley. Many of the tips and lessons learned here would also apply to other sportsters as well as many other motorcycles.
Battery Tender: amzn.to/2BMD1p4

Авто/Мото

Опубликовано:

20 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@chrisanderson1-66 Год назад

It takes me an hour for my 2012 Superlow. The negative cable is super short

@Henry-uh8kj Год назад

Ever hear of a light?

@jaimegarcia9505 7 месяцев назад

Awesome. Thanks 4 the tip.

@tristanlandahl9710 2 года назад

The cover is that easy to pop off? This whole time I’ve been using a flat head screw driver to take it off

@monicatrimble2890 3 года назад

What size wrench did you use? And the terminal cords are loose wires but all go to the closest terminal to the outside correct?

@digitalmotorhead5323 3 года назад

It's been a few months since I did this but I'll see if I can check again.

@Supremebean303 Год назад

13mm

@philipwoodacre1644 9 месяцев назад

@@Supremebean303 it's a 10 M/M WRENCH THAT YOU NEED

@ziggyustar3137 3 года назад

Nice how battery cover snaps off my 2000 has a chrome cover that if I ever get it off I will drive over it with my truck

@kernowdel 3 года назад

Have you got an alarm on your bike. If so how did you deactivate it. ??

@digitalmotorhead5323 3 года назад

I do have an alarm on my bike but I have not had to disarm it yet. My guess would be that you need to have the key fob with you and then cycle the on/off but the bike manual should have that info on it too

@kernowdel 3 года назад

Thank you. Great informative video by the way.

@digitalmotorhead5323 3 года назад

Glad it was helpful, thanks for the positive feedback!

@Smokeyboi97 2 года назад

So weird? Your battery is backwards, mine goes in the other way. It’s a 2014 883.

@juanvillavicencio1187 3 года назад

Literally fast forward through all the part that would be more helpful.

@cartoxa 2 года назад

OMG... There is hex screw 3/16 under the battery... Why didn't you use it... I understand that it was 2 years ago, but still...

@moriaheducationsupport2338 2 года назад

Because you don't have to. AS shown

@carlostecuapetla7708 2 года назад

Does it matter what terminal you do

@Phurzt 2 года назад

Negative first, but if its totally dead it doesn't matter. For safety always do negative first.

@davidmacgregor5193 2 года назад

@@Phurzt If you pull the main fuse before removing the terminal screws, the system is dead and it doesn't matter which you disconnect first. I normally disconnect the + then the -. My Iron has the factory alarm and immobiliser so to prevent the alarm sounding I turn the ignition on before pulling the main fuse.

@moonshooter6216 2 года назад

Did you just reach a metal stick over both battery terminals! Lmao 🤣

@ALLrobotsAreSad 3 месяца назад

Would’ve been nice if you explained the actual process of removing and installing the battery. 🤦‍♂️

@jd83241 8 месяцев назад

Jeezy, so many guys giving this guy a hard time over motorcycle knowledge! I bet 90% of yall never worked on an engine or done real repairs before you bought the bike! 🤣 I know because a lot of guy's buy without even knowing how to change the spark plugs! Hehe! i only looked this up because my brother the non mechanic asked me to! not rocket science!