Harley Maintenance That NEVER Made It In The Manual (It should have)

Подписаться 68 тыс.

Просмотров 72 тыс.

50% 1

Harley maintenance is pretty typical just like on any other motorcycle, but there are some items that should be treated as maintenance items to avoid serious issues. The whole point of maintenance is to avoid a problem before it occurs so it makes you wonder if parts that wear out were overlooked or intentionally left out of the Harley maintenance schedule. Chain tensioners wear out, but there's no service interval and these can cause serious engine damage if left unchecked. Evo Engines eat lifters around 40K miles, this has become known knowledge but it was never listed as a service interval. Carbon build up on the pistons isn't a concern until it causes a problem, once again not listed anywhere to prevent the issue of pinging and power loss. Some items are simple and some not so much, but performing the unwritten maintenance can prevent some serious repair bills later down the road.
SUBSCRIBE FOR MORE ru-vid.com?sub_...
Random and Funny Videos!!
WEEKND OPs Playlist www.youtube.com/watch?v=5HHmv...
Bikes on the channel:
Motorcycle: 2016 Harley-Davidson Sportster XL1200CP (Sportster 1200 Custom)
• Harley-Davidson Sports...
Custom Parts Installed:
LED Headlight amzn.to/2LY4NA4
LED Bulbs Front Signals amzn.to/32PjpIT
LED Bulbs Rear Signals amzn.to/2OaqP5j
Smoked Out Turn Signal Lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Heavy Breather air cleaner
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Reach Seat
Harley-Davidson Chrome and Rubber Collection grips
Drag Specialties Offset Clevis Footpeg Conversion Kit
Aftermarket Chrome Foot Pegs amzn.to/30C68SA
After Market Chrome Shifter Peg amzn.to/2LBTTAZ
Aftermarket Chrome Crash Bar amzn.to/308QFhg
Aftermarket Detachable Back Rest
Aftermarket Docking Hardware For Back Rest amzn.to/32RhZ0j
Harley-Davidson Air Flow timing cover
Harley-Davidson Air Flow clutch cover
Screamin' Eagle spark plug wires
Screamin' Eagle spark plugs
Black Front Axle Covers amzn.to/32TrSe1
Flipped Down Stock Mirrors
Motorcycle: 2017 Harley-Davidson Sportster XL1200X (Sportster Forty-Eight)
• 2017 Harley Sportster ...
Custom Parts installed:
Harley-Davidson Factory Security System
LED Headlight amzn.to/2OcFih2
LED Bulbs Front Signals amzn.to/3086pQV
LED Bulbs Rear Signals amzn.to/34VFfw9
Smoked out turn signal lenses amzn.to/2Oaz41m
Vance & Hines Twin Slash 3 slip on exhaust amzn.to/2O9mqQ8
Screamin' Eagle Exteme Billed Air Cleaner (Black)
Vance & Hines FuelPak FP3 amzn.to/2M0tV9r
Harley-Davidson Burst Collection Foot Pegs
Harley-Davidson Burst Collection Grips
Harley-Davidson Burst Collection Shifter Peg
Aftermarket Black Crash Bar amzn.to/32MsUZq
Screamin' Eagle spark plug wires
CNC Front Axle Covers amzn.to/31GGE7W

Авто/Мото

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 346

@GixxerFoo 2 года назад

Do you have any maintenance items that were never listed in the service schedule?

@jberschi 2 года назад

Automatic primary chain tensioner. Replace it with manual tensionaer.

@fredrickhaemker8434 2 года назад

Will a manual tensioner reduce wear over the automatic tensioner?

@jberschi 2 года назад

@@fredrickhaemker8434 Either manual or hydraulic. Harley moved away from the automatic spring tensioners. They always tighten and can't loosen up so you end up with a chain way two tight and most people believe this is directly related to all their crank problems as well as problems with that chain and the tranny.

@jeremybettis8446 2 года назад

Any thoughts on the 124 S&S kit for the 06 night train fxstbi with the 88c.i. motor. Found your channel pretty recently and enjoy your thoughts and commentary.

@conspiracyrider9164 2 года назад

I have a 2000 xlh1200. when I got the bike I replaced voes , fluids, clutch, filters, Carb Gaskets and Orings, fuel line, oil Drain line, voes hose, petcock and filter. I got really good deals on most of that so it didn't cost arm and leg. once that was done if bike was acting funny it would be easier to narrow down since so much was new. if I didn't get great deals on new parts then I wouldn't have done it. but I'm so glad I did.

@longrider188 2 года назад

If you get S&S gear driven cams like I did about 100,000 miles ago, you never have to worry about those cam chain tensioners.

@GixxerFoo 2 года назад

The gear drives are awesome! If you've got a solid crank in the bike they are one of the best things you can do on Twin Cam!

@umpatas5468 2 года назад

@@GixxerFoo I agree.

@patrickhollis5332 2 года назад

Yea they r better especially if u have done the crank but car manufacturers has been using the tensioners for years I believe the crank is probably more with the tensioners going bad especially if it is pretty bad all the wobbling the crank is doing can’t be good for anything especially tensioners

@VeritasEtAequitas Год назад

Yeah, just your crank out of true and tapers wearing out lol

@jordantserghanos2604 Год назад

Hey, Another great video. Thanks for the great content. One thing that is always on my mind are the automatic primary chain tensioners like the one on my 2010 twin cam. Especially with my gear drive cams. I have tossed around the idea of going to a manual tensioner or something like the Baker or the Hayden (automatic). I would also consider the SE unit but have heard many stories about the noise they produce. What are your thoughts on this and do you have any experience or preferences on a tensioner for the twin cam?

@DeathProofProductions 2 года назад

It’s great to see others discussing routine checks on early twin cam tensioners. 👍

@GixxerFoo 2 года назад

The new spring tensioners aren't as bad as the original ones now, they have a better pad material on there too. Still a lot of debate on if it was spring tension or a bad run of timing chains though.

@paulf9459 2 года назад

Your right, my 95 Softail Custom at 38,000 experienced a lifter failure. I was lucky I caught it before it caused more damage. The bike for the last 5 years was only driven by my friends, it was a spare bike after getting a new 2013 CVO Road King and a 2015 St Glide. I'm the original owner and I have to admit I did install at 13,000 miles an EV 27 cam and Edelbrock street heads. One lifter roller bearing failed and wiped out the cam. I replaced the cam with another EV 27 cam and Fueling lifters. Again, I replaced the inner roller bearing with a Timken and the outer bushing, I also install Ultima's roller rockers and Rocker Lockers. Keep up the good work we appreciate it.

@robbyclark6915 2 года назад

The external breather is the first thing I did to my new ‘21 FXLRS. I did it myself with 1/4” fuel line and a brass tee courtesy of Lowe’s and Ace hardware. You do have to drill holes in the backside of the stock Harley ventilator but it’s super easy, you can barely notice it and it does the engine a world of good. If you don’t have a true stage 1 ventilator like the low rider S, or you don’t feel comfortable drilling holes in it, you can order a top notch high flow breather with an EBS from DK customs. All their breathers come with an EBS of your choice and they are some of the absolute best for performance. IMO. Non paid endorsement, I just really appreciate their products and the support they give. DK, all the way!

@GixxerFoo 2 года назад

The ventilator air cleaner makes it pretty easy, nice and clean too! The heavy breather is pretty difficult and really hard to hide.

@robertlumsden942 2 года назад

i also check the rubber lines on my sportster going into the oil tank. overetime they get brittle. great video.

@GixxerFoo 2 года назад

Great point! That's a good one!

@Pork-Chopper Год назад

On Shovels as well as Evos, they had a little screen strainer called the Witche's Hat. It was the big flat slotted screw on the engine block above the nose cone (cam cover) and to the rear or left side. That large slotted screw would hold the Witch's Hat, that had a spring looking thing that fit over it. It also required periodic inspection. If they get clogged up with debris, (the old shovelheads used horse hair filters). Oil passes through this "strainer" first, before it feeds the lifters n top end via the push rods on Evos. If this strainer gets clogged up, you are starving your lifters, pushrods n topend rocker boxes. This was the main cause of failure in valve trains. The Witche's Hat was always a neglected item. You can change the oil a hundred times, if the strainer was clogged or partially clogged the valve train will eventually fail. Also cams with aggressive cam lobes can also wreak havoc with your lifters... Ride Hard Live Free

@hugieflhr03 2 года назад

A video on how to check the rubber swing arm bushings on touring bikes. I had a late 90s roadking and the miles were low but it was wagging the tail at highway speeds. It didn’t go away until the swingarm bushings were changed but there was no good way to check them. They looked ok but I had no way to check for flex. Like a ball joint on a car we just stick a crowbar up in there and see what moves

@GixxerFoo 2 года назад

That's a great idea and they are often overlooked!

@57torg 2 года назад

Great call, thanks for the tips.

@poordumbbastardnation2311 2 года назад

I have 50K on my 07 TC, just picked up new cam chain pads because I was getting that eery feeling that I needed to change them, Lol. Thanks for the info on the seafoam, never thought about doing that to my bike even though I do that to my vehicles.

@Big88Country Год назад

Thanks my man! I'm a new Harley owner. I learned about the cam tensioners from guys like you putting this info out. I have an 05 Electra Glide, so I pulled my cam cover and found my tensioners on the verge of disintegrating! The bike only had 30K on it. I upgraded the cam plate to the screaming eagle with a new oil pump and hyd tensioners. Had I gone another 5K miles on it, it would have been disastrous! Appreciate the content, keep it coming!

@erisgh0sted961 Год назад

Nothing like catching a problem right before it's catastrophic.

@williamyoung3340 2 года назад

Upgrading the cam bearing on evos while you're doing the lifters is a good idea

@frankmarkovcijr5459 2 года назад

I would imagine considering that the Eeveelution motor has not been produced by Harley for almost 20 plus years that all of the previous owners of an Evolution motor powered anyting would have replaced the Ina bearing long before now. My Evolution powered 1999 Sportster is like the Energizer Bunny it just keeps going and going and going and going.

@frankmarkovcijr5459 2 года назад

The best thing you can do with a twin-cam if it is possible to go and replace the Shane Drive crap with a proper Gear Drive and not have to worry about it ever again never have service ever again never have to worry about catastrophic engine failure. What the Harley Factory should have done at the factory level they are forcing their customers to do at ridiculously high prices. How they can have such an expensive motorcycle with such cheap part in the engine in critical areas I can not imagine the sense behind this stupidity. Frankly for what Harley charges you could go to S & S Motors and get whatever kind of Harley motor you want and put it in a frame bought the primary drive to that Bolt the transmission true that and then just assemble all the cycle part and you don't have to pay for any thing you don't want on your bike.

@skeetersaurus6249 2 года назад

I've heard about the 'Harley Wobble' for years...but now owning an Indian (and before that, a Victory and a BMW, in the 'big twins' class), I've never encountered it on an Indian...but as I've told several friends, I DID, ONE TIME (many years ago) encounter it on a Honda 200 twin! Scared the hell out of me, never figured out 'what caused it', couldn't reproduce it...it was a tight turn in the mountains, I had let off the throttle taking a hard right, and where I normally would have let off before entering the turn, thought I was ok...then got into the turn and found I was going too fast...and let off more...I've thought it through hundreds of times in the past 40-years...always figured it HAD TO BE relative to the 'engine braking', the bike's weight, that right turn...something all put together...but I'm here to tell you, that was an INLINE 2-cylinder, and it did it too...where my Indian HAS NEVER done it...so I don't think it's the rubber mount or the V-twin, as the issue.

@canadiansa1nt309 2 года назад

I would add having a look at the primary chain tensioner shoe on big twin evo's after 30,000 miles. I've seen those crack or break (including on my own '95 Fatboy).

@GixxerFoo 2 года назад

That's a good one! No one ever thinks of the shoe on the primary, those new automatic adjusters can give you some real problems!

@kennethwise7108 2 года назад

One of the BIGGEST things overlooked is the "fall away procedure". Everyone refers to it as the "Death Wobble" but in reality it's a lack of maintenance. If the proper maintenance is done you'll NEVER experience a death wobble. There are people out there who have made gizmos that are "bolt on's" but are only masking the main problem (steering head). I've been doing this for 30 years and have this done even after purchasing a brand new POS HD. If upon completion of the service by the Stealership if its STILL not right TAKE IT BACK AND SAY ITS STILL NOT RIGHT!!!!!

@GixxerFoo 2 года назад

That's a excellent point! The steering head fall away is a pain to do and a lot might feel that it's not necessary but it is critical to get that right!

@kennethwise7108 2 года назад

@@GixxerFoo That's 99.99% of the problem, should've mentioned it

@SwiftyMcVeigh851 2 года назад

Totally agree with you on this. Just picked up an 01 fxd and the forks were shit..so when I pulled them out, I addressed the stem bearings...its my honest opinion, that the grease..or lack of, had been there since it came off the production line.

@kennethwise7108 2 года назад

@@SwiftyMcVeigh851 yep, that's why I said I've been doing this long enough to know. I honestly think nobody does the fallaway procedure nor changes the fork oil. I changed a dudes fork oil that was so nasty that I almost vomited. He had 60k miles on it and NEVER changed it!!! I use the Jim's fork oil tool kit and a mighty vac and it's super easy that way. These new POS bikes don't even have drain plugs on them and require complete disassemblely of the forks to facilitate changing your fork oil. I wouldn't own anything new even if it was 1/2 price. Garbage...

@manbunmyname5866 2 года назад

The leading cause of the weave is rider posture. If you lay down on the tank it will miraculously stop weaving. Tire manufacturers have known it and explained it since the 60's. Everyone ignores that because if the bike is set up perfectly it won't weave, much, at legal speeds.

@phillipmckeownakalucifer.6689 2 года назад

Your the best of all...... seriously.... easy to understand.....

@rogermcwilliams6302 4 месяца назад

I have an 04 RK,been using MotorKote for last 12 years,good stuff!

@vancedyer755 5 месяцев назад

The Gas filter should be replaced every 50K miles not 100K. My filter looked like it was clogged with yellow pollen or some weird alien crap. I did install an external breather vent to the bike. It's very gratifying to check the Air Filter to find it clean and free of oil contamination, and all that crap is not getting sucked into the throttle body

@timdavis8154 2 года назад

Very informative Thanks

@GixxerFoo 2 года назад

Glad it was helpful!

@FrancescoGaeta77 2 года назад

Very informative material. A kind of recap of what you've discussed so far, after 125 videos. Yes, I took the trouble of counting all of them on because I'm a massive fan of your content! So, nice one and keep it going!

@GixxerFoo 2 года назад

Thanks for sharing! I appreciate the support! I like to recap sometimes when I get a lot of questions in the comments, a lot of those videos get lost and buried over time.

@FrancescoGaeta77 2 года назад

@@GixxerFoo, many thanks for your kind reply. Would you please consider making a couple of videos about upgrading Shovel engines? Something like you did with EVO and TCs. Big bore or stroker kits, cams swaps, dyno charts and stuff like that. Cheers!

@anchorsaweigh9893 2 года назад

Great Video and Valuable Information!

@GixxerFoo 2 года назад

Glad you enjoyed it!

@RideAmerica 2 года назад

Great tip on the oil cooler. Never thought of that.

@GixxerFoo 2 года назад

Glad you liked it!

@richardrussell500 Год назад

Install remote oil filter to reduce engine heat around 15*... also check engine mount bolt torque. They have known to come loose.

@gelfyd1 2 года назад

Great review as always!!

@GixxerFoo 2 года назад

Thank you! Cheers!

@jimanness4586 2 года назад

Awesome.., always looking for advice such as this…👍👍

@GixxerFoo 2 года назад

Glad to hear that! Thank you for supporting the channel!

@dirtydingus5465 Год назад

Love the “HOG 40,000 Miles” patch! I did that one and half seasons…club life!

@theslowride66 2 года назад

As a Extreme Detailer & a Wrench I see stuff the Grease Monkey's never I typically spend 30 or more hours with a bike .I see Nails in Tires, loose sprockets & misc. nuts & bolts. leaking forks, wrong axels , Bad brakes, Leaks (A Never ending list....) Even had one come in that all 3 holes where the Drain plugs were So loose I could See the O rings.(Finger licking loose) Probably the one thing NO ONE ever checks is the Jiffy Stand!! Make sure that thing is TIGHT!! Harley has the Best design with the locking tab (minus FXR , DYNA & Sportster) When Detailing I remove the entire assembly & Clean all around it .Check the Spring & the Resting Rubbers then Grease & RED Loctite the sucker in there. If that bolt comes loose & the Square in the Locking Dog wares or breaks "boom boom" (out goes the lights) your bike falls down. Maybe you under it. I keep Springs & Rubbers in stock. GIX!! I need my Book back !! that my whole life in there .LMFAO! . . . . PEACE!!!

@gregkistner1955 2 года назад

Good advice on the oil cooler!

@GixxerFoo 2 года назад

Thanks 👍

@hollywoodboggie 2 года назад

Thanks Gixxer!

@GixxerFoo 2 года назад

Any time!

@johnbrooks241 2 года назад

Great insights Foo!

@GixxerFoo 2 года назад

I appreciate it! Thank you for your support on the channel!

@frankmarkovcijr5459 2 года назад

With my Sportster I use a pump to pump out the oil in the tank and then I spin off the old filter, and fill the oil tank and filter full of fresh oil. Miniscule amount of oil left in the lines I don't care about oh, it doesn't amount to much. My motor has lasted 370,000 miles so far so I must be doing something right.

@GixxerFoo 2 года назад

That's a really good idea to pump out the oil tank! 37K is not even broke in on a Sportster engine.

@frankmarkovcijr5459 2 года назад

@@GixxerFoo I have 370,000 Mi on my Sportster not 37,000 of course at 37,000 miles it looked a whole lot prettier than it does at 370,000 Mi.

@FXSTrider 2 года назад

I was Facebookless for a long time and when I finally got it I didn’t know about groups. I had a ticking noise in my 88 Twin. I took it to one dealer and they said they couldn’t hear anything. I rode it home and the next day riding into work it jerked twice really hard. I called another dealer and took it to them. Cam bearing completely failed destroying one of the cams, shattered the oil pump and tore up the crank and case. If the dealer had said a long time ago “Hey this is a known issue with these” it could’ve been prevented. I still have that bike and I also bought a 19 RG. Now back to my comment about Facebook. I joined several Facebook groups and discovered transmission fluid transfer was a huge issue with the early M8 touring bikes. Never heard a word about it from the dealer. Facebook groups are your friend...the dealer not so much

@donwaltman4276 2 года назад

Great video Gixx, what's your thoughts on lifter to bore clearance? I've heard it's critical and bad stuff happens if there is too much.

@_hitmn_ 2 года назад

Top job again bro🔥👍

@GixxerFoo 2 года назад

Thanks again!

@guspineda7167 2 года назад

Forgot to mention that you are probably the best tech guy and honest one of them all ,on RU-vid these other monkeys ,hint,hint are only about them self's and what they're doing do own stuff, but your the real deal ,keep it up brother and God bless

@SaddleTrampTV 2 года назад

I would venture to say about the evo lifters; between 30k to 40k. My heritage needed them at 37k, and my electraglide at 34k.

@dictumfactum9468 2 года назад

Hey Tramp !

@SaddleTrampTV 2 года назад

@@dictumfactum9468 Hey man!

@GixxerFoo 2 года назад

I remember your videos of you changing those out! The lifter blocks being bolted on with the Evo makes the job a lot easier!

@bruceprigge7420 2 года назад

Thank you! 🙂

@GixxerFoo 2 года назад

Any time!

@crspcritter 2 года назад

Right on ; big bore kit done ; tear down and bring up was 8 days . Fire up today .Yes carbon on head and piston . I’ll consider external breather . ✊🏻👍👌🙏 Good tips again

@GixxerFoo 2 года назад

Thank you! That's awesome to hear you're back up and running! Let me know what you think of it when you get that all broke in!

@crspcritter 2 года назад

@@GixxerFoo did 50 mi ride to break in rings below 3000 rpm . All good ; she bangs harder on grades . Less throttle twisting . Anxious to take back out for over 3000 rpm’s . Then oil change - Mild build but only imagine what heads and more $$$ would do !!!- Grateful for what I got - I’ll track mpg later and disclose . ✊🏻👍👌👋

@tomconner5067 Год назад

Loose components between the rider and the road, a seat mount, risers, triple tree, wheel, swing arm, bearings bushings end-spacing, fork oil imbalance, cartridge imbalance left and right shock imbalance, too much weight on one side of the bike, rear wheel out of alignment, one or both wheels offset to one side or opposite sides to counter roll center (of mass) offset (wide tire kits w spacers and not setting the engine plate 1/2 the thickness of the primary spacer in the opposite direction of the drive side keeping the mass centered, this is easy to check put plasti dip on about 45⁰ of the circumference covering the full width of the tire contact surface, drive in a straight line for as long as needed to wear the dip off, see if one side is worn off more than the other, compare and note any differences in lwft and right sides and discrepancy between the front and rear tires) also, cracked handlebars, front fender loose, rear fender bolts loose (2up) loose seat.

@brandonmacon3317 2 года назад

As always thanks Foo 🤘

@GixxerFoo 2 года назад

We appreciate your support on the channel!

@GixxerFoo 2 года назад

Do you have any unwritten maintenance items that should of made it on the Harley maintenance schedule?

@maurogallegos8694 2 года назад

Thank you for another good video...

@GixxerFoo 2 года назад

Thank you! I appreciate your support of the channel!

@daleleslie1049 Год назад

When Twin Cam motors came out. Harley had a Recall for Cam Plate/Oil Pump Problems. Every motor for several years, was upgraded. It may not be in Service Manual. Factory Recall

@jimmyp6443 2 года назад

Purchased a 7,300 mile 1999 heritage last April ,replaced inner cam bearing ,with S and S quickie pushrods .which sets me up for a easy lifter change . and yes panheads forever ,excellent post thank you

@GixxerFoo 2 года назад

The good old Pans, I've got to dive into those cause there's still a few things left have carried over into today's motor.

@jimmyp6443 2 года назад

@@GixxerFoo I will help you ,1964 74 inch duo glide , I have owned many panheads ,this one however will ride in front of my hearse for my final ride .

@kaantuncer7884 2 года назад

96 ci twincams have primary chain tensioner problems also, which should be changed in order to avoid crank damages due to overtightening of primary.

@Timeline916 2 года назад

Thanks you have finally convinced me, I’m selling my Harley and buying a Honda .

@davidbrayshaw3529 2 года назад

You meet the nicest people on a Honda.

@GixxerFoo 2 года назад

Lol when Honda did that back in the day that was very well played at the time.

@davidbrayshaw3529 2 года назад

@No Tan Commando My mind says Goldwing. My bank statement agrees with you, however.

@djangor4969 11 дней назад

I hear the Honda ST1300 had major problems with speed wobbles . All big makes have their problems.

@josephd5715 2 года назад

I like this channel, the information is helpful and well presented. Harley-Davidsons' suffer from dreadful engineering, and before you start leaving me nasty comments, please know that I've logged north of 250,000 miles on them in the last forty years, and near as many miles on other brands. Harleys are overpriced under engineered US manufactured motorcycles assembled from parts largely imported from off shore countries. I sold all but one of mine a number of years ago, and made the switch to other brands manufactured with imported off shore parts from othe countries.. So why did I hang on to my 2013 FLHR? It feels good, plain & simple. Rolling down the road at 75 mph with no where to go, and all day to get there - reminds me of a time long ago when the world was a simpler place and it hadn't yet occurred to me that I should check out the competition. My Harley handles like a dream just as long as I never have to turn, or stop. Ignorance truly is bliss? Must be, look at all the people out there fighting a loosing battle with age & gravity riding Harley-Davidson motorcycles.They're easy to spot, most of them are posers with no bugs on their jackets, wind screens, or their motorcycles for that matter. That happens when your big ride of the week is eleven miles for breakfast, or from bar to bar thinking your a badass. So what does this have to do with GixerFoo's maintenance presentation you ask? If you can't service your own motorcycle, or you don't have access to a reputable independent shop, you get to deal with the weakest link in the whole Harley ownership experience, that being the dealership. A recent interaction with my local dealer served to remind me of why I sold all but one of my Harley Davidsons. Rant over, thanks for your channel, GixerFoo, and the opportunity to comment. Keep up the good work, and stay free!

@GixxerFoo 2 года назад

I have to agree Harley's do leave a lot to be desired stock and the price of entry doesn't help either. There are some awesome dealers and others that are just plain rip off shops, I've seen both. I gotta admit though the feeling you get from a Harley is like nothing else out there!

@bobhoffman5581 2 года назад

Well stated, sir! 👍👍

@clownpocket Год назад

I think it’s good to inspect your brake pistons, and rebuild the calipers and clean or replace the pistons if they’re not moving evenly.

@hawkdsl 2 года назад

This was excellent!

@GixxerFoo 2 года назад

Thank you!

@michaelblandina7405 Год назад

Any recommendations for the "add on breather"?

@shannonstiles8751 2 года назад

Great video 🇺🇸

@GixxerFoo 2 года назад

Thanks 👍

@bradleyyounger8499 2 года назад

I always purge the oil on my evo just for some peace of mind.. love my baby and want her to last forever

@GixxerFoo 2 года назад

Evo's honestly tend to last forever if they are taken care of, those motors are almost bullet proof.

@noonespecial1217 2 года назад

Good info thx👍

@GixxerFoo 2 года назад

No problem 👍

@tattoomiked4612 2 года назад

Let's not forget about the twin cam compensator nut issue. Also the tc88 cam chain tensioners should probably be checked sooner than 40,000. Just my opinion. Some of those fell apart alot sooner.

@tommys2979 2 года назад

New lifters are a great excuse to change your cam out on the evos. Bought my bike used with 47k and i figure i was approaching 50k so i got new lifters, then a new intake, then a cam, then carb rebuild lol its a vicious cycle but upgrade fever is great and gets you to learn your machine by working on it yourself.

@GixxerFoo 2 года назад

You might as well throw a cam in there too, cams on Evo's are inexpensive and it's all right there. Doing your own work is very rewarding and makes you one with the machine!

@tommys2979 2 года назад

Did all my own work to my '96 fxds, andrews ev27, inner cam bearing, lifters etc. Never touched a harley prior to owning mine and have done everything myself. Its very rewarding plus you know where to check for issues since you get to know unfamiliar territory. Thanks for the reply buddy be safe out there!

@nobodysreview6137 2 года назад

I do all my own work, i've built a few Choppers as well. One step at a time and double check everything and work slow. I've had to take stuff all apart and re do things before but at least you learn. I'd convert to a Chain final, i hate the belt just because when it breaks your fucked. Locktite everything and take your time, cant wait to hear her start up.

@grantkokich6906 2 года назад

Good points. Checked my 2005 super glide cam chain tensioners recently and both look in good condition at 47000 miles. Mechanic thinks they are the original ones. Bit surprised they are in such good condition , but pleasant surprise.

@GixxerFoo 2 года назад

That's really impressive, some motors just don't trash the tensioners. Most of the time they are due for a replacement at 50K and that's the max.

@grantkokich6906 2 года назад

@@GixxerFoo looks like it's hit and miss. Some go as little as 20,000 miles and others 80, 000 miles. Maybe due to chain condition , type of riding , maintenance etc.

@dextersuarez9948 2 года назад

About to replace my oil pump/ cam plate this year with a high volume version on my M8, I’ve already gone ahead and done an external breather, upgraded the primary (completely redid it, billet clutch basket, performance clutch, comp delete, chain conversion, Hayden tensioner) considering doing a top end guardian kit to bulletproof the top end.

@GixxerFoo 2 года назад

That's some strong work right there! That bike will be ready to run for the long haul without any worry!

@dextersuarez9948 2 года назад

@@GixxerFoo that’s the plan, I need it to last forever 👹

@ronowen5747 2 года назад

I just bought a 01 Electra Glide with the 88ci and it had just got the chain tensioners and lifters replaced at 33k miles👌 thank God he just had it serviced before I bought it

@GixxerFoo 2 года назад

Whew I am surprised they made it to 33K, they were supposed to last for 30K but usually needed replaced around 15K at the most.

@ronowen5747 2 года назад

@@GixxerFoo may of been the reason it was in the shop for 8months after buying it🤷🏼‍♂️, I've had it a month and it runs great. Starts on the first crank, pretty sure I'm going to have to replace the inner primary cover gasket, it drips oil, about 2 drops a day

@michaelchance9405 2 года назад

Hello GixxerFoo, thanks for the great videos…is your video for converting an 88TC to 98” still on the InterWeb? I have an ‘01 FLHT Classic that I want to upgrade, nothing wild on the cams - basically an improved torqued. Thanks!👍🏻👍🏻👍🏻

@GixxerFoo 2 года назад

That's awesome! Yeah I'll drop you a link right here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9wOurNkiMyk.html, videos get lost and buried over time

@markbefort1194 2 года назад

I installed S&S gear drive cams and valve springs, upgraded cam bearings, Fueling oil pump and lifters, crankcase reed valve, programmable ignition, Jagg oil cooler with thermostat.Punched it out to 95" with 11/1 pistons. 42mm Mikuni flat slide carb on my 2003 FXDXT TC88 about 12 years ago. She makes 86 HP and 100 FT LB of torque.

@chopperchopster 2 года назад

nice. A 600 CC inline 4 easily makes 100 HP though. We spend a lot of money with little return when ya think about making HP. Next time your on the freeway just try to race any sport bike. I wish HD would do a modern inline 4 .

@GixxerFoo 2 года назад

What cam are you running? That motor should be putting down a lot more horsepower and torque.

@GixxerFoo 2 года назад

Harley is getting close with that Revolution Max. What Harley's benefit is that they don't have to rev to the moon to make the power.

@markbefort1194 2 года назад

@@GixxerFoo 585 S&S. I'm happy with what it's doing.

@adminadmin9997 2 года назад

I bought a new 2020 m8 and I have 33k miles no problems yet. Do oil changes every 4k miles

@lpd1snipe 2 года назад

Good tips as always. After I change the oil in my Panhead, I start and run it with the return line going into a container. Then after it's running I let it run until I seen clean oil coming out then I shut it down and hook it up back up to the oil bag. Then I top it off and I'm good to go. Hard to do that with the newer bikes.

@GixxerFoo 2 года назад

Yeah it's not something you can really do with the newer bikes, that's a great way to get all the oil out though. I may be weird but I hate mixing fresh oil with old stuff even if it's just a little.

@lpd1snipe 2 года назад

@@GixxerFoo it's not weird at all. I'm the same way, and oil is cheaper than bearings.

@chopperchopster 2 года назад

oil is cheap insurance!

@bobhoffman5581 2 года назад

@@GixxerFoo When changing your car or truck's automatic transmission fluid, disconnect the injector wires, or pull the fuel pump fuse, and turn the engine over, for 20-45 seconds, to help empty your converter, to get more "old" fluid out. I learned that "trick" from a mechanic in the Engineering Garage, at the GM plant I retired from, Hydramatic... Be sure to put the pan back on the trans first, unless you like cleaning up transmission fluid! lol

@guspineda7167 2 года назад

Do you have a video showing how to change the lifters on a Evo

@umpatas5468 2 года назад

Do the evo sportster need to look at the lifters at 40k too? I'm about to put bigger jugs and cams on anyway. So good to know now.

@forgottenmotorcycles 2 года назад

I'm trying to locate a breather valve. Kranck Vent was the name of the valve. It was manufactured by a company that went by the name E.T. Performance. Was distributed by a company named M.C. Advantages. They also sold a line of starters called Spike. A company called Hayden and a company called Sifton also make a similar breather valve. Do you know anything about these breather valves? How they compare to the Kranck breather Valve. Have run a lot of the Kranck valves without any failure. Can't locate this brand anymore. Do you have any thoughts of the Sifton or Hayden breather valves? Thank you, Sir.

@bullast2046 2 года назад

Everything you mentioned, I’ve done.. I’m about to turn her in for the 10k mi service (2014 that I’ve polished more than I’ve ridden since I’m active mil).. I’m interested to see what my brake fluid and fork oil will look like…

@GixxerFoo 2 года назад

Brake fluid gets pretty brown after a few years, fork oil smells like a rotting body lol

@bullast2046 2 года назад

@@GixxerFoo that’s a serious claim.. not sure I want to know how you know what a rotting corpse smells like..

@frankensteinrules6511 Год назад

THANKS!!!!!!!!!!!!!!!!!!

@guspineda7167 2 года назад

Can I squirt some BP blast in the cylinders with out hurting my motor to clean off the top of the piston

@araneaetvelivolum1086 2 года назад

i recently added a catch can due to excessive blow by TC96 St II. do i have to do something to get ride of the carbon on the piston or is it burning off over time? Love your videos, really excellent advice. Ride safe 🤙

@GixxerFoo 2 года назад

Thank you, I appreciate it! You might run a compression check to be safe if you're getting excessive blow by, how many miles are on the motor?

@araneaetvelivolum1086 2 года назад

@@GixxerFoo 53k :) Compression check was done 5k ago and checked out ok. Technician said due to S&S cam shafts, cam plate and bigger oil pump, the blow by is generated.... sounds right?

@ACoustaDC 2 года назад

I find it odd that you do not do any maintenance videos. You have a crap ton of knowledge, I would just like to see some of this in real-world episodes. Especially things like bypassing the crank case vent etc...

@GixxerFoo 2 года назад

I tried to do some of those years ago but no one really watched them oddly enough. I'm due for a front tire and I'll be removing, changing, and balancing that myself so I'll film it along with some other scheduled maintenance I have to do.

@ACoustaDC 2 года назад

@@GixxerFoo I'm looking forward to seeing that..... thank you

@kenincairns9025 2 года назад

Fork oil every 10,000 miles, rear shock service every 20,000. Steering head bearing service every 20,000, replace on condition or every 3 inspection. New wheel bearings every third tyre. Replace brake fluid every 12 months.

@tex9280 2 года назад

💪🇦🇺💪 I had been talking with my Tech about changing my tensioners in the cam chest & primary case in my 2017 Twin Cam.... asked why is there a issue.... No just thought it might be worth doing.... Said would be an extremely good idea as I now have 65,000km.... Glad to know I was already on the right path👍💪 Living the FUCKING Dream ❗ Safe travels 🙏❣️ 💪Harley Davidson must do💪 💪Algorithm 💪

@GixxerFoo 2 года назад

That's awesome to hear you're getting those done, it will save you a lot of future headache!

@mrmatt7210 2 года назад

Twin Cam Tensioner " Some last 100K miles, some last 30K" ..... I would suggest a check of your came chain tensioners every 10K miles. Basically, your out the cost of a gasket if you know how to turn a wrench or a small labor fee. This is a small price to pay to be assured your bikes engine will last for many years to come. In addition, there are aftermarket tensioner pads which are said to wear better than OEM and can be purchased for less than $20.

@joracer1 Год назад

What about the breather gear on evo?

@eb1941 2 года назад

Harley lost a lot of good will over spring loaded cam chain tensioners, lost goodwill equals lost customers. I know as I am one of them. Even a bit of help would have gone a long way, but no help what so ever. Great video.

@GixxerFoo 2 года назад

Great point! They really did honestly, they screwed a lot of riders over that deal.

@johnmelton1777 2 года назад

That's one reason I bought an EVO

@kennethwise7108 2 года назад

@@johnmelton1777 me too!

@anitabonghit266 2 года назад

Your comment is completely comical. Why does Harley owe you good will?? No machine is built to last forever. Everything made has it’s issues with some part or assembly method. Sounds like you are quite the entitled person

@chopperchopster 2 года назад

@@anitabonghit266 Harley is well aware of the issues and did next to nothing about it thats why. The cam chain tensioner issue is huge. Has nothing to do with how long it should last. It was a FAILURE. HD knew it. They just kept building them until FINALLY upgrading to a hydraulic system.

@XenaTheQuadCamBikah 2 года назад

Idk if it’s still a potential issue on some years, or if it’s been mentioned in the comments already, but that stupid “grenade” plate in the Sportster clutch can explode. I own a 2004 I bought new and replaced the stock clutch with an energy one and while the riveted plate in mine looked like brand new at about 30k, some people have reported theirs exploded. Love your channel ✌️.

@GixxerFoo 2 года назад

Thank you! I've heard of that happening before where the rivets separate and grenades the clutch. I haven't seen it happen myself but I know it's been known to happen. I'll have to dig into it and see if the Sportster clutch was ever updated to better design.

@jonnymac8925 2 года назад

@@GixxerFoooddly enough it wasn't upgraded or changed, I replaced mine in my 2018 and it's still the same. It's not a matter of if it will happen, it's a matter of when. If you Google it there's so many pictures of it happening. Another thing is swapping the oil pump drive gear as most know, and replacing it with a Buell bronze oil pump drive gear if one likes to rev their motor that's definitely an upgrade that should be done.

@hugieflhr03 2 года назад

I would say the evo cam bearing should be replaced if you are ever in the case or at 40,000 with the lifters

@GixxerFoo 2 года назад

Absolutely, especially if you still have the INA bearing in there.

@timmcpeck7527 2 года назад

I added an external breather to my 2018 after watching one of your past videos. It only has 3,500 miles on it and I did not want the top of my pistons loaded with carbon. I’m hoping I caught it early enough. Thanks for the tips.

@GixxerFoo 2 года назад

Nice work! It will make a huge difference, even if you have carbon build up and then add an external breather the pistons will clear up over time. You for sure don't want that thick black coating of carbon on the pistons, raises your compression and not in a good way.

@tommys2979 2 года назад

Give er some full throttle here and there and burn those deposits up!

@robbyclark6915 2 года назад

First thing I did to my ‘21 low rider S , that I just picked up in February! It’s homemade from Lowe’s and Ace hardware! I’ve had it for over 1k miles and it’s working great! Was super easy to make but requires you to drill holes through the stock Harley ventilator on the Low Rider S which some guys are not comfortable with. 1/4” fuel line and a brass tee and a couple of holes. Best mod on my bike so far.

@jimfischione2743 2 года назад

What type did you buy?

@timmcpeck7527 2 года назад

@@jimfischione2743 DK Custom

@krogersucks45 Год назад

On my 95 I got 95kk on my lifters. I replaced them but my old ones were still good.

@paulvanbrug491 2 года назад

Those engine rubber mounts should be designed for longer intervals,🤸🇨🇦✌️

@GixxerFoo 2 года назад

They have redesigned them several times to make them last longer and more stable. There are polyurethane mounts out there that last a lifetime but you'll really feel some vibrations with those.

@johnmitchell9705 2 года назад

I can think of two on a Sportster, grenade clutch plate and steel oil pump gears.

@GixxerFoo 2 года назад

There were some clutch issues with the rivets on those, the steel drive gear is all well and good until you start making some power then you need the bronze gear. Lol Buell found that out the hard way but it never made it into the XL.

@Gary-yt8ee 2 года назад

Do you have a video on installing a remote oil filter and an oil cooler on Harley FXRs

@GixxerFoo 2 года назад

I don't have a specific video for it, they aren't too bad to put on though. Quite a lot of plumbing on there but it's all external.

@grfwarblehjhj1259 2 года назад

Great info as always. Comment for algorithm

@GixxerFoo 2 года назад

Thanks for that!

@h3r63rt 2 года назад

Good, I was running out of ideas to spend money on my bike. Thanks.

@Ed.Johnson 2 года назад

@h3r63rt 2 года назад

@@Ed.Johnson miss

@GixxerFoo 2 года назад

No worries! There's always something to spend money on with a Harley lol.

@jwrappuhn71 2 года назад

Good vid bro.

@GixxerFoo 2 года назад

Thank you! I appreciate the support!

@clintwoodruff1187 2 года назад

Man, what a great video! Great info, delivered in an encouraging manner, and Best of All... NO ARMS FLAILING ALL OVER THE PLACE!! I complained to you earlier on about the distracting 'arms flailing around' ! And since this video did not have the distraction, I thoroughly enjoyed watching it ! Great job!! Thank you!

@chevyon37s 2 года назад

Had a set of cams and lifters installed with 24k miles on my 103... cam chain tensioners were due for replacement. The biggest thing effecting their wear is how you ride. hot and high RPM use, shorten the life in an exponential manner. If you lope down the highway at 2500rpm yea 100k miles is realistic life with them. If you rip it in the twisties running up and down the gears at 4-5k RPM along with the higher engine temps from doing so, you’re gonna eat those tensioners up A LOT faster. At least that’s my theory after chatting with a 20 year HD master tech.

@aaronbrown5252 2 года назад

I think that's also called common sense.

@ev1001 Месяц назад

Chain roughness that’s all even slight minuscule burrs wear the tensioners more than other chains. Not rider being hard on the machine. Just saying mfg on a chain my .02. Ride safe all

@randymarks4011 2 года назад

Wow!! my shovelheads must be bulletproof hahahahaha.

@GixxerFoo 2 года назад

Lol Shovels are pretty solid if you go through them really well!

@corneilcorneil 2 года назад

Give them credit... just in business!

@pb68slab18 2 года назад

While yer doing lifters on an Evo, might as well change out the stock Ina cam bearing for a Torrington, if ya haven't already.

@GixxerFoo 2 года назад

That's an excellent point, get rid of that INA and put a Torrington in there.

@tommys2979 2 года назад

Koyo B138 is also a replacement bearing for the stock inner cam bearing. An inner cam bearing tool is an essential for any evo owner who does their own work. The tool makes life easy changing that bearing out.

@pb68slab18 2 года назад

@@tommys2979 Yeah, Koyo now owns Torrington.

@kennethwise7108 2 года назад

Get rid of the 5/16" center bolt on the front motor mount and install a 1/2" one.

@kennethwise7108 2 года назад

I used to have a video on this on my channel but deleted it. For some dumb reason HD uses a 5/16" bolt and a 1/2" fits perfectly inside the mount. You have to drill the small fat washer but afterwards it'll work MUCH better than stock. Also helps to use a self locking nut on the bottom. Torture it to 15/ft lbs

@allancaspers6471 2 года назад

Good video, you didn't talk about the 1200 Sportster motor, so they don't have issues? A co-worker Harley is down for big repairs. He bought a 2008 Road Star for less than the Harley repairs. He's been thinking of just parting out Harley ride Road Star and save money to get a different Harley.Not to ruffle feathers what metric cruiser would you get if your Harley is down?

@GixxerFoo 2 года назад

The 1200 Sportster engine is, and a lot of big twin owners hate to admit is almost perfect. The rigid mounts rocker boxes tend to leak over time which was redesigned in 2004 to eliminate some gaskets. Really the only thing on the Sportster and it's only a problem if you put a lot of power in one is the steel oil pump drive gear. Swap that drive gear out to a bronze gear and you're good to go. If I wasn't on a Harley, I personally like the Kawasaki Vulcans, especially the old mean streak.

@martinkeet8373 2 года назад

Sportster oil cooler??

@allancaspers6471 2 года назад

@@GixxerFoo I only wish H-D would have made the Sportster 1200 into a 1325cc years ago. One more thing not all Harley shops are created equal in serving your bike. After bikes were in the shop for service seen friends air cleaner's fall off, new brake bolts loose, and other parts. My friend's belt broke after Harley shop said it's good for 20k miles. The bad apples make the good mechanics look bad. Find a good shop and treat them good. If I lived in California I would go to Laidlaw Harley, Matt Laidlaw nice down to earth person.

@tmar0075 2 года назад

Good points about service on particular types of bikes..i bought an 1989 ultra classic Evo..was that bike prone to the infamous wobble?..what is the fix? ..enjoy ur channel..ride safe😊

@GixxerFoo 2 года назад

Not so much on the Evo powered bikes but the Twin Cam bikes is when we really started to see that happen.

@tmar0075 2 года назад

@@GixxerFoo Thnk u sir😊

@peterrestaino7047 2 года назад

Inspect the frame on 81 to 98 FLH where swing arm and engine is supported. Its a hollow gusseted arrangement. it traps water when you wash the bike and if you dont drill your own drain holes it will rust through. Ask me how I know. And now I dont wash motorcycles any more.

@GixxerFoo 2 года назад

That's a good one! I have never heard of that before, but that does make sense!

@peterrestaino7047 2 года назад

@@GixxerFoo thanks for the reply

@scrumthebum2451 2 года назад

I use a scavenger oil system every other change on my twink. On the shovel I disconnect the return line & run it till oil turns clear

@GixxerFoo 2 года назад

That's a great idea on the Twin Cam, the more oil you can get out the better every oil change.

@scrumthebum2451 2 года назад

@@GixxerFoo There’s at least a 24 oz of dirty oil in the twin cam that doesn’t come out just by draining. Scavenger gets it all out

@Digger456437 2 года назад

I am picking up my new Heritage Softail 114 as soon as we get a break in our Wisconsin weather. I asked the service department about a the Vented Dipstick ventilator for The Milwaukee 8. They said not needed. To avoid blow by simply do not fill the crankcase all the way full. Just two notches below full on the dipstick. Made sense but am guessing better to install the Vented Dipstick?

@GixxerFoo 2 года назад

They are right about not filling the oil all the way too full, that's with any Harley or else you'll get oil out of the air cleaner. I personally would go ahead and still go with a vented dip stick or trans cover.

@binarym 2 года назад

Do so! The vented dipstick on an M8 is a must have I highly recommend them.

@anitabonghit266 2 года назад

Oil is to always be checked hot. It takes at least 30 minutes on a good warm day of straight riding to get oil temp up because the oil tank/bag is remote and the oil isn’t sitting in the heat of the engine very long to warm up quickly, like in a car. When oil heats up it expands. Four to five dots down is about where you want it actually. Remember anything in that zone is fine. You don’t have to always keep it full

@Digger456437 2 года назад

@@anitabonghit266 Thanks! I actually ran into a long time Harley mechanic I know. He said the exact same thing.

@anitabonghit266 2 года назад

@@Digger456437 well you did it again sir. I have been doing this professionally for 18 years

@MOTOPILOT6 2 года назад

Fuel consumption issue. My 2013 sat for just over 3 months while getting powder coating. The only engine work was removing and installing the exhaust. I’m hoping I didn’t get the sensors backwards. The issues are the engine appears to drop one cylinder at any constant speed. Then both kick when under any level of acceleration. What’s shocking is my fuel consumption has gone through the roof. Around 10 mpg! Something has gone wrong. Anyone experienced this?

@GixxerFoo 2 года назад

That is strange, my wife's bike did that dropping a cylinder and then picking it back up. I found the clip that hold the injector connector on was broke and it would work its way off. But you might double check your sensor and all your connections. If you have a tuner, you might try flashing to a different map and then back to your current map. My bike started coughing through the throttle body and missing once, I reflashed my map and that took care of it.

@MOTOPILOT6 2 года назад

@@GixxerFoo awesome. Thx for the reply. I’ll give it a shot

@bernardlesperance742 2 года назад

Where exactly is it that you spray in some SeaFoam or Power Foam to clean the top of the pistons?

@GixxerFoo 2 года назад

Pull your spark plugs, squirt a little bit in there and let it sit overnight.

@eljayess 2 года назад

Hey, could you do a video on rebuilding the Clutch master cylinder. I just bought a 2016 flhtp . It has all the symptoms of the recall , but the service has been done . So I get to do it myself.

@GixxerFoo 2 года назад

That's not a bad idea, I remember those having the issue. Kinda funny they went back to a cable clutch on those bikes now.

@eljayess 2 года назад

@@GixxerFoo it would be nice if there was a way to switch over to a cable