Yes sir!!! You are right, I have made the MISTAKE of taking trigger and or safety mechanisms apart & even if you know Exactly how to put them together it's impossible!!! Pins tiny springs & even tinier ball bearings, you sometimes have to be an Octopus with small STRONG fingers to reassemble those parts
Tienes muy bien estudiado el blitz,adquiri uno hace unos 4 meses ,va del todo bien ,y tus videos sirven de mucho para conocerle mas a fondo,antrs de aue se presente un problema aunque no entiendo mucho de ingles ,han servido de mucho,ojala por ahi salga el genio de la lampara y se pueda obtener mas potencia ,sin compromster si gran funcionamiento ,recibe un gran saludo muchas gracias por compartir conocimiento
I changed some parts from my friend blitz and now I have that problem that it shoot only auto, no matter where that selector is. When I just click the trigger it shoot about 3-6seconds full auto. Do u have anything in mind what could cause this.
Could be the selector switch is broke and stuck in that position or that piece i showed in the video is stuck or the part it presses on it stuck it's hard to just tell you'd have to look over everything
Im wondering if this is an issue just on my gun, Has anyone else tried turning up the power on the hatsan blitz past 4.3 turns out from all the way in on the hammer in .25 cal or .30 and ran full auto mine does not seem to work full auto it jams the bolt handle runs 1 round out of the 41 round mag an gets caught on the 2nd round the pellet gets caught right before it hits the barrel I push it thru an take the mag out an push a barrel rod to and I see the pellet had ran into the side before it can get centered into the barrel it had a dent where it ran into the side before it can enter the barrel happened with slugs and pellets when I was at 7 turns out I found out after testing it wont run full auto past 4.3 turns outward from fully turned in on hammer spring. I want to get more potential as I use to be able to expand the 46 grain h an n slugs 80% of the way in gel 1 foot away now they hardly expand so I defiantly lost some power, Has this been the case for anyone else with the blitz in .25/.30 cal or is it just my gun.
Turning the adjustment screw that much puts to much tension on the spring, mine was all bent out of shape i had to order a new one i also ordered a new hammer while at it and got lucky to get a thicker hammer that weighed more so now I'm getting 62fpe out of the first few shots then down to 58fpe
@@airpower7692 I also bent a spring I had a spare one one hand already I had ordered before, Im trying to straighten the other one out, But does yours run full auto with 62 fpe?
I bought a hatsan blitz .30 and an invader .25. Neither gun worked properly. They are novelty items to look at. Incredibly unreliable straight out of the box. Doesn't hatsan even test these before they send them out? Very very disappointing.