HATSAN FLASHPUP/FLASH/VECTIS *** Magazine Loading How To *** 

Thanks for great info. I just bought a Hatsan Flashpup QE in 25 cal. also. I appreciate you taking the time to share all of your expertise.

Thank you for teaching how to do this properly. I've just received my new Hatsan Invader Auto PCP and can't wait to shoot it tomorrow for the very first time. These kind of instruction videos really help. I'm not too lazy to read the manual but sometimes those manuals are very hard to read and understand. So a big thanks to guys like you who explain stuff by showing it. ✌👍

Hey bro! Love your channel! I’ve just purchased a flashpup myself in .177. It’s great to have someone as knowledgeable as you to learn from as this is my first pcp. I too was cornfused by the owners manual regarding trigger adjustment screws. The manual is wrong. Thanks for the videos, your dedication, humility and no nonsense approach are greatly appreciated. Keep up the good work.

My last 4 Flash Pup mags did not seem to have any spring action. It was necessary to loosen the Philips screw a little before the spring wound function. I appreciated this video and I'm sure many new Hatsan owners will also.

Often, the simplest of functions can be made difficult.

Had no instructions in my box. I did have experience with a umarex synergis magazine but I found ur video. Had done it correctly but had to be sure. Props for the video. Thanks.

Thank you very much! After your video I understood the mechanics of the magazine and also realized that one of them was defective and was able to repair it.

Chad, that’s a complete & thorough demonstration, explanation on how to load the flash & vectis magazines, for owners of these kind of magazines, we should prepare loaded ones when hunting, instead of fumbling erroneously! after reading over & over I figure it out, the other day but again your video helps all of those hatsan airgun owners who have these types of magazines! ( yesterday I zeroed mine topped with discovery 4.5 - 18 x 50 ffp and it had a tight grouping slightly moving right of the bullseye.

Thanks man, just got my first PCP, the Hatsan Flash QE and had no clue what those instructions were talking about. You made it simple, so thank you.

Thank you so much for this video. After countless hours of frustration over the course of months I was about to send my Flashpup mags back for replacement. Thanks a million.

Thank you. I have a lot of firearms, but the Hatsan Sortie I received last night is my first PCP. These things aren't cheap, so I made sure I was following all of the directions and got my butt kicked in the process. I was up late cycling the action, reloading magazines, pumping away, and firing into a box with a folded drop cloth (awesome trap by the way - want to try it with .22 LR) in it hoping the neighbors wouldn't complain about the noise.

They know how to load them at Hatsan, but obviously they are airgun makers, not teachers. Thank You!

That's to funny but your right the instructions kinda of suck it took me a few to figure out how to use my clip's in my hatsan flash pup . Thanks for all the info on this gun it's help me Alot with my gun .

Very good information and video , it took me awhile to figure out the magazine the instructions booklet especially .

You are a life saver got my Hatsan Flash in wood today a .22 and I read and reread on how to load the magazine and after and hour of loading and unloading the mag it got dark on me ,so I came in and got on the net and thanks to your video I load the mag up right ,so thanks for helping me out.

Thanks for the detailed "How To" on these Hatsan magazines. I just purchased a NovaStar with this type magazine, however the instruction manual is for the Nova which uses the old style magazines. I wound up finding out the BullMaster uses the same magazine so I downloaded that manual and to say the least it was totally confusing loading all the pellets in skirt first. One comment on Pyramid Air's website said load the first pellet skirt first then turn it over and load all the rest head first. Not that simple, there's more to it than that as you showed. Thank you very much for your video, I accidentally stumbled across it searching how to load these magazines. Your explanation is outstanding and I appreciate the detail you went into. Thanks again!

Hey Brother I got my flash pup 22 synthetic yesterday I like it I'm glad you showed me how to load it I've been doing guns all my life I think I could have figured it out pretty quick he he thinking about putting my Redfield illuminator I've had it forever 56 millimeter front lens it's in my dear gun I haven't used it in 20 years just set in the safe with all my other junk rest of my stuff for the rifle is coming in the mail this week let's hope but when I get it shut up I'll be ready to shoot it check it all out first and then shoot it for a while and then turn it down then we'll tune it up have a good day shooting sir bang bang Bang hey shoot as some more videos he he he

Nice instructions! 👍

Thanks I have been loading one at a time couldn’t figure it out now it’s easy thanks

THANK YOU SO MUCH BROTHER , I WOULD HAVE TORE MY MAGS UP IF YOU HADNT POSTED THIS ! ESPECIALLY SINCE I JUST GOT MY FIRST PCP YESTERDAY ! HATSON VECTIS , I HEAR YOU CAN DO MORE MODS WITH THE THE FLASH AND PEOPLE CLAIM THERE VERY CLOSE TO BEING THE SAME THING. IM HOPING FOR A LONGER BARREL LATER ON . AND WONDERING IF THE FLASH AND VECTIS HAVE THE SAME BARREL MEASUREMENTS. BARRELS ARE TO EXPENSIVE TO PRDER AND IT NOT WORK

Liking the videos man recently bought me a flash pup supposed to be delivered tomorrow thanks for all the info very excited to get my first bullpup my first pcp gun was the Benjamin Discovery I love the power and accuracy of pcp

Good educational video. I need help like this when I loaded my mags for my Flash Pup. ScottinPa.

Thanks for the video as always man,easy to follow and understand.didnt even bother trying to follow manual,its junk.. But got my first 2 magazines loaded :) got a shim made from credit card,cut to fit like a glove with the hole for screw perfect ect,painted black and when all together,looks great. Plan on going tomarrow morning possibly,bringing some .25 jsb hades and h&N grizzlys pellets. Realy like both and hoping it likes one of them lol..also got some crow mags,barracuda hunter extremes,and some jsb King heavys...thanks again for all the help getting me up and running,couldn't have done it without you man!

Thanks! Good heads up😀

I just got a hatsan hydra my first pcp and dealing with a clip and I couldn't feel the spring it just stayed where you turn it . I had to get a phillps screwdriver and loosen the center screw till I felt the spring and it turn when it was wound . When the center screw is to tight when the clear side is up and you turn it counter clock wise and let it go it stays put and doesn't spring back clock wise . So if you turn the clear piece counter clock wise when its facing up and nothing happens when you let it go the center screw is to tight .None of what he said will work if the center screw is to tight . I got 2 mag's with the gun and both were to tight and did not spring back . Once I watched this video and you said there was a spring in there and you had to told it I know something wasn't right and started unscrewing the center screw till it sprung back . So just add that as something to check if your new to this like I am .

Thanks this was helpful to me

Hey thanks I'm not one for reading directions right what I needed to see

My God thank you. Hatsan's instructions are terrible. I am a first time air rifle guy and had trouble being able to charge the Invader going off their instructions and then couldn't figure out how to load the damn magazine. I wish these things were more like real steel on magazines. Pretty simple to look at and figure out.lool

Thank you you very much i really thought i broke my mag thanks for the help

Thanks for the explanation I did get my magazines loaded but did not understand that there was a spring internal to the magazine I thought that there was a mechanism in the gun to index the holder but makes sense that the use of a spring is easier. What is the small oring for?

thnxs a lot , it made it clear for me .

Great video, thanks!

Thank you so much! I was wondering what the heck they were talking about per the instructions.

Thank you for that. I just got the Invader in .25 and it didn’t say what type of fill probe to use. The worst manual ever!

Their tukish, living on a budget, working out of a garage. Give them all the credit.

Thank you. It was very helpfull

Thanks for saving my first day with my first Pcp !

Thanks, just got my .25 cal Flashpup, Now I know how to load pellets, instructions were not good, I still do not know how to insert the single shot tray. Nothing in the book about it, I see how it should rest, but it is tight, and I am not forcing a piece of plastic with out instructions!

Nice war room

I did the supposed fix for jamming. the carts I got jam I got one that works half way the other just the 1st round. Looked everywhere for better magazines. There is no fixing that actually works. kills me when I see others on video with simple loading no issues. mine are terrible jams constantly.

I have to admit this morning I went to load a clip and completely forgot how to do it after not shooting my gun for about a week and a half talk about frustrating such a small task but holy cow it was confusing for several several minutes lol

My magazine is stuck in the Receiver I do not want to force it out, any answer will be greatly appreciated.

What if you’re a dummy like me get three pallets stuck in the barrel. Take it to a gun shop they pop them out. Then I proceeded to put that same magazine with three empty pallets in it and try to caulk it and the magazine gets stuck. What then? I watched your video after the fact, I don’t know what to do.

How do I de-gas my Flashpup??

Thanx that was very helpful to me , good video 👍

I have a major problem with my Flashpup and it has become really hard to cock the charging handle. Any help?

Thank you

I bought a flash .22 and just got a 25 cal, question is, my 25 clear part of the magazine feels stiff compared to the .22 magazine, is that normal? I won't be able to get out until a week to make sure it rotates normally. Is the clear cover supposed to spring back on its own if not holding it?

Mine was discovery vt 4.5 - 18 x 44 sfvf 1/10mil. per click push lock turrets in FFP with accessories 30mm rings phonecam adapter flip up covers as to the clarity, it’s just at par with the Athlon Talos 4- 14 x 44 ffp a little bit milky @ full power, there are several models to choose from but the most popular are the VT series, @ Aliexpress.com you can view various models, but is now available @ airgunopticsplus here in N. C.

My problem is not with the magazine it's with the fuel probe I can't get it to hold air

Yup, who ever wrote the instructions should be your first target, all 10 shots. Nothing but misery, now my mag is stuck, bolt won't slide, can't shoot. New rifle today, now have to send it back with stuck mag in it😂

Does Hatsan make a magazine for the MOD 95QE?

How much will you charge to tune my flash wood

How do I put in the mag into the flashpup?! Lol I'm in the woods right now and finaly ready to shoot and can't figure out how to get the mag in!?

Skip allll the way to 4:38

Can i put dovetail mouts cuz all i got is a 1 piece mount and i got The synthetic

What if I don’t feel spring tension and it doesn’t try to spin back when I let it go?

As your flashpup had a Huma regulator installed did it increase the shotcount? as of mine I shoot it with various pellets in chrony the standard deviation was not bad! but the extreme spread was too way high! I would like to add a regulator on it, but I dont’ know how to install it, also I noticed as I tried to adjust the trigger screws only one was functioning while others are too tight,

Hey Bro hope you don't mind but I got a Question for ya. I have the Flashpup also by the way. I load my Magazine and when I push the Bolt Forward it seems like it is hanging up on the Mag and won't load a Pellet in the Chamber. It use to Load easy and it don't have that many Rounds through it a rough estimate would be about 50 Rounds. Is their a way to fix that ?

Only complaint is it's too Short. Love brothers in air

Could you drill out that last hard stop and gain an 11 th shot?

written by someone who wanted to show how smart they are but know common sense!

I enjoy your airgun videos, just my opinion but a mancave needs black n silver as in Raiders!