Travis shows how to adjust the power and tune the Hatsan Hercules Bully to get more shots and a flatter more consistent shot string. Another Airgun Essential from Airgun Depot! Hatsan Hercules Bully: www.airgundepot.com/hatsan-he...
Please make a video with a Hatsan Hercules (2 X 500cc) Two videos, one of how to acess the hammer spring and another video of how to acess the air outlet valve (where it hits the hammer) i have the Hatsan Hercules 1.000cc, and would like to know how to acess these two zones, Thanks!
Hello, shots per fille at optimal velocity can be increased by the power adjustment (reduction in power) as you practically demonstrated in this video? Regards,
It is definitely a loud gun. We don't know of any aftermarket solutions to quiet it down, so your best bet is to drop the power down. If you drop the power down very much you'll probably have to fill to a lower pressure also to get an even shot string.
Get a adapter and a true ldc/silencer. Factory shrouds suck 😉 Not nearly enough length and volume to act as intended. I make my own , and up to .25 i use 1.5" carbon tube at about 10" long. For really high power .25's that need to be quiet or .30 cal and up i use 2" diameter.
Hello, I have a question. If I have a weapon like Hatsan Hercules Bully can I change the size of the pellets with a smaller caliber only by replacing the pellets and the warehouse? I mean not to change parts of the weapon such as the pellet pusher, but only the pellet store. I would like to buy a weapon like this but I don't know much about compressed air guns, and I want to find out. Please answer me .
Any recommendations as to the absolute best pellet in the 45 caliber Bully? Looking for the best combination of knockdown power and range. Is .454 the best size?
Mine is the worst airgun in the world. 45 cal horrible accuracy horrible guality horrible horrible horrible horrible trigger. With 280 grains at 10 yard's you cant hit elephant. Dont give money for trash my friend.
@@navaxoalaska3749I've had a lot of problems out of mine. Mainly the breech seal. It keeps blowing out. Accuracy is ok but mine was set full throttle and it obviously doesn't like it. I have an AEA challenger pro in .357 and have shot around 300 rounds thru. It's absolute butter. Very accurate gun. Hopefully I can tune this Hercules bully.45 and get it to be trouble free.
why not just burn a pretty little hole through the stock giving you access to the adjustment screw so that you dont have to keep taking the stock off to adjust it🤔