Unfortunately, no. It is still not supported by the DJI Fly app. DJI Go supports clean HDMI output and I hope that DJI Fly will get the same functionality in time.
@@tuxtard porfavor amigo. Nos puedes mostrar como instalar el DisplayLink en el DJI RC??? Ya he estado googleando y no logro encontrar nada para poder instalar apk en el dji rc. Te lo agradecería mucho amigo. Un saludos
Amigo porfavor audenos para saber como instalar el DisplayLink en el DJI RC porfaaaaa - Friend, please help us to know how to install DisplayLink on the DJI RC pleaseeeee
Hi. I am still trying to find a way to completely remove the patch so I can show all the steps required to unlock the DJI RC. Even when I refresh the firmware or do a factory reset I still end up with partially patched RC that requires less steps to unlock. If I don't find a way I will simulate the missing steps to get the full picture.
Hello good day how are you? When the new video comes out to be able to install and connect everything well step by step. From already thank you very much, greetings!!!
@@CharlesPoolimagine Did you get USB adapter with DisplayLink chip in it? Did you manage to install DisplayLink adapter? Please make sure that you have both the adapter and the driver as mentioned because only the DisplayLink driver and adapters will work with the 32bit SoC that DJI RC has.
I would also like an explanation on loading the driver's please. I have gone through the process of unlocking the RC but I'm nervous about side loading the driver without any instructions. Even if you don't have time in a video, is there a chance you could explain it here in the comment section?
I would also like an explanation on loading the driver's please. I have gone through the process of unlocking the RC but I'm nervous about side loading the driver without any instructions. Even if you don't have time in a video, is there a chance you could explain it here in the comment section?
Hi. You can look for instructions on how to perform patching procedure on DJI RC FCC website and ask the patch developer to assist you if needed. When you successfully unlock your RC I will be able to assist you to setup ADB and install the required driver.
Hello good day how are you ? I have the same DJI RC Control with a MIni 3 Pro, they bought me all the adapters, just like the video shows and it DOES NOT work for me. Can you help me please. I DO NOT Unlock the DJI RC Control. Simply plug in the adapters and cables as the video shows. Do I need to do something else? Thanks Regards
Hi. First you have to unlock the device and install the driver. Without the driver installed the adapter will not work. You need to: 1. Unlock the device and enable ADB on your RC 2. Install the driver APK using ADB 3. Reboot the RC 4. Give screen capture permission to the driver 5. Connect the adapter to the RC
Thanks for answering, I'll see if I can get all those steps. If you make an explanatory video of those steps you are a hero.. I'm afraid of making trouble. A big hug, regards tahnks
Thank you for sharing, this is the only video i saw that the dji rc connected via hdmi, can you teach how to unlock and install driver in dji rc please, thanks you
Hi. I will create a video to show how to unlock and install the driver, but in the meantime you can find this information online. Currently I think the only way to unlock DJI RC with the latest firmware is using payed DJI RC FCC patch which, among other things, enables ADB on DJI RC. You can find this patch here: www.djircfcc.com. Then you can use ADB on your PC/Mac to install driver APK.
Did you notice any impact of the DisplayLink driver installation on performance lost during a flight or during a flight with video transfer to a USB port? And question 2 - whats the resolution of transfered video?
Well RC 1 is generally slow, but I didn't notice any additional performance degradation. I am not sure about the resolution, but I will check and get back to you.
@@tuxtard thx for your answer. I already installed DisplayLink apk from your link on my RC (access from FCC Hack). Now i have a problem to find correct wire, standard cable USBc to HDMi as you said in video is not working. So im looking for correct adapter :/ Maybe u already tested some simplest cables like USBC to USB then USB to HDMI? (without that old DVI etc)
Hi. Currently only DJI RC FCC patch is able to unlock DJI RC with the latest firmware - www.djircfcc.com Even though DJI RC FCC is meant for a different purpose it enables ADB on the DJI RC which you can then use to install driver APK using your PC.
Hello good day how are you? I have all the accessories, but I don't know how to unlock the RC Control and install the driver. Could you please explain step by step how to do it? Thanks Regards
hi! 'm having a bit of trouble when using Inspire 3 RC Plus controller and hacking the firmware linked to the Mavic 3, the HDMI output will have black borders on all four sides.! can you help me?
Hi. I don't have RC Plus so I don't know what could be the cause, but I guess that you are experiencing the HDMI underscan issue. You can try looking for HDMI overscan/underscan settings on your display and see if you can adjust it so that image fits the screen.
Hello good day how are you ? When the new video comes out on how to unlock and install the apk, in RC Control, we are looking forward to it hahaha :). Regards thanks
Hello, many thanks for the video. But... US$ 69 (in crypto) for the FCC app, plus hacking the controller, plus NO CLEAN HDMI feed... this will only be worth the hassle when it provides a CLEAN HDMI feed. The image I get on the DJI RC screen is very good already. No need to send it to an external screen. Again, thanks for the video.
Yeah, clean HDMI feed is still not supported by the DJI Fly app. I hope that DJI will add that option in time because previous app DJI Go does support clean HDMI. It would be the best if they implement it as an option because I use external screen to fly and I need telemetry.
Hi. If you find a USB-C to DVI adapter that has a DisplayLink chip, it will work. It doesn't matter what interface it has, but it is important that it has a DisplayLink chip inside because only the DisplayLink driver works with this RC.
Hello Tuxtard good day how are you? When the new video comes out to be able to install and connect everything well step by step. From already thank you very much, greetings!!!
@@tuxtard Come on, let me know when you try it, and it works well, we are eagerly awaiting the tutorial. I have all the adapters and I would like to get it working now. Regards
Yes, but DJI RC 2 has HDMI out enabled out of the box, so you just need a regular USB C to HDMI adapter and you don't have to install anything. RC 2 HDMI out is buggy though, so you might need to plug your HDMI adapter multiple times for it to work.
I have a DJI Remote Controller (not Pro, i.e. without external antennas). Do you know if it is possible to install any apk? If so, can you suggest me a link where I can find instructions? At this moment, I receive the message "you don't have installing rights"
@@gschembra unfortunately, there is no way to unlock the latest firmware version. For older versions there is a paid service called DJIRCFCC (www.djircfcc.com), that I am not affiliated with in any way, which is able to unlock the RC so that you can install APKs via USB.
Hi I'm from Bangladesh... I have dji macvic 3 pro..... I want to connect another big monitor with my dji Rc controller. Is that possible? If possible please help me @Tuxtard
Hi. It is possible if that monitor has HDMI port. If so, you can use the same adapter type with DisplayLink chip as shown in the video and unlocked DJI RC controller.
Why not just use an Android tablet with mini/micro HDMI output port, combined with whatever drone controller app that runs on Android? You know, like a tablet that some people use for streaming video to their big screen TV. The physical cable should mean no lag.
Sure, you can user RC - N1 controller with an Android devices that has HDMI output. This video is made just to demonstrate that technically you can have HDMI output on RC2 as well, but DJI decided to lock this device so you can't have it out of the box.
@@tuxtard Thanks. Do you know what the DJI Fly minimum RAM requirement is, roughly? I suspect RAM is the most likely potential issue for using their program on some random Android phone/tablet.
@@tuxtard Have you tried connecting that controller to a nifty little phone USB C connected hub like Anker makes? Then the hub's HDMI outputs to a monitor. But it doesn't work! Some guys who are more skilled at programming that I am have tried to figure it out, tried very hard, but have failed. But a tablet with mini/micro HDMI output seems like a better solution anyway.
Hi. Yes it is, but you will also need a USB-C capture card. You can find many guides online on how to use this capture card, for instance: www.fastcompany.com/90959045/how-to-turn-your-ipad-into-an-hdmi-capable-tv-or-monitor
@@evanevn1878 Only if it has DisplayLink chip inside, but as far as I know, there are no USB-C to HDMI adapters with DisplayLink chips. See how big my adapter is? It's big because it has DisplayLink chip inside that replaces hardware part that DJI RC is missing to produce HDMI signal.
@@evanevn1878 Yes, unfortunately these adapters are more complex and more expensive. Before buying you should first check if you can unlock your DJI RC and gain ability to install drivers. If you are not able to install drivers than you should not waste any money on adapter.
Hi, Would You Please Make A Video On Showing How to Hack That Controller And Also If You Are Possible To Provide That Hack Free Then I will be very thankful to you .
Hi. New firmware version is released. I need to check if it is unlockable first. Also, I didn't make a patch myself so I can't provide it for free, unfortunately.
Hi. It's not, it works. But you need to install DisplayLink driver first and use DisplayLink adapter. You can't install DisplayLink driver and use any other adapter, you have to use DisplayLink driver + DisplayLink adapter.