Тёмный

HDZero Shark Byte Runcam Nano HD with M12 Lens Mod - TX5R.1 25mW, DVR iFlight Nazgul XL5V5 FPV Drone 

EatYourVeg FPV
Подписаться 333
Просмотров 876
50% 1

Here's a completely unedited and ungraded DVR upload from the Shark Byte system on my iFight Nazgul XL5V5. I rendered it in 4k on Resolve to try to minimise RU-vid's compression...
I was using the TX5R.1 VTX at 25mW output, with a TBS Triumph Pro u.Fl antenna on the quad and two VAS Mad Mushroom omnis on the goggle module. The camera is a Runcam Nano HD with a Caddx Ratel M12 lens mod. I don't think I have the focus quite nailed, although it goes without saying that the goggle view is massively better than this crappy DVR recording.
I recorded in .MOV format, and imported that into DaVinci Resolve 17. You can see at the beginning there's some issues with dropped frames which other users have also found. I'm sure the next firmware update will address that.
I'm MASSIVELY impressed with HDZero and Shark Byte, and love flying it. I have so much more confidence and ability to see things than I did with analog, and my analog setup was about as good as you could realistically get. The new HDZero Runcam Micro HD will be another step forward and then of course, a more powerful VTX will bring the system on further.
I've not been flying crazy long, and this is also only my thrid flight back after not being able to fly for 3.5 months. It's really just a long pack of me trying to get back into it, chasing a mate a bit, and an opportunity to upload some Shark Byte footage.
Thanks for watching and happy flying whatever you have!

Опубликовано:

 

22 авг 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
@ironlionfpv
@ironlionfpv 2 года назад
I need to see it tomorrow when it's fully processed but i can tell it needs a bit more focus. Did you paint the m12 housing? Could be a little IR leaking through, not sure. Also set sharpness to 70 and maybe a bit more saturation. Nice park to fly 👌🏻 What goggles do you have?
@eatyourvegfpv
@eatyourvegfpv 2 года назад
Yes I agree that I should refocus too. I didn't paint the M12 housing, I used black TPU and tested light penetration and couldn't see any but it won't hurt to paint it anyway so I'll doing that. Thanks for the settings tips. I use HDO2's. What about you?
@ironlionfpv
@ironlionfpv 2 года назад
@@eatyourvegfpv you cant see IR light 😉 i recommend painting it matt black. I have sky04x, a bit similar to the hdo2. Both great goggles 👌🏻
@eatyourvegfpv
@eatyourvegfpv 2 года назад
@@ironlionfpv Haha! You're very right! I didn't twig... I'm such a dick! I'll get right on that! 👍👍👍
@reevolution_fpv
@reevolution_fpv 2 года назад
Looks even better than when I tried it! Is that only at 25mw too?
@eatyourvegfpv
@eatyourvegfpv 2 года назад
Thanks mate, it's getting there! Yes, this was 25mW.
@mikesmith9181
@mikesmith9181 2 года назад
Is there anywhere the 3d printed housing can be purchased. I would like to try the mod but don't have a 3d printer.
@eatyourvegfpv
@eatyourvegfpv 2 года назад
Which country are you in?
@mikesmith9181
@mikesmith9181 2 года назад
I"m in the U.S.
@Spideystrat
@Spideystrat 2 года назад
I'm getting poor range on mine with a new UX II RHCP antenna. Unsure why.. I did lift the signal pad on the board so soldered to underside instead. Clear image, latest firmware... Head scratcher ... Just 20 feet on 200 mw before unflyable breakup.. VTX problem or is SB very picky about antennas I wonder ....
@eatyourvegfpv
@eatyourvegfpv 2 года назад
Are you sure you're not in pit mode? Only 20ft sounds like it may be.
@Spideystrat
@Spideystrat 2 года назад
@@eatyourvegfpv Set that to OFF I think. It must be something like that ! On the right track I think, has to be something to do with power levels ...
@eatyourvegfpv
@eatyourvegfpv 2 года назад
@@Spideystrat Also make 100% sure that the VTX table in BetaFlight (if that's what you're using) is set up correctly.
@Spideystrat
@Spideystrat 2 года назад
@@eatyourvegfpv Do you mean the UART and 2 cli commands to enter ? Ive configured the uarts yes
@eatyourvegfpv
@eatyourvegfpv 2 года назад
@@Spideystrat No, that's to get Canvas Mode working. There's a Video Transmitter tab in BetaFlight that needs to have the VTX table information filled in correctly. Have you followed the manual which tells you how to do that?
Далее
Did I just KILL a HDZero Freestyle 1W VTX?!
10:48
Просмотров 2,5 тыс.
CyberBrawl - The Last Sacrifice
01:35
Просмотров 1,3 млн
HDZERO GOGGLES unboxing and first impressions - Part One
1:03:02
Cooling Towers - HDZero @ 200mW
4:03
Просмотров 175
HDZERO Nano90 Lens Comparison
1:12
Просмотров 925
Wing DVR + MT12 motion controller on Betaflight
3:53
Просмотров 2,7 тыс.