Headlight switch repair on a 1996 Jeep Grand Cherokee 

Thanks. Your way looks super easy.

Muchas gracias, It worked for me. Thank you, all the way from Mexico

Thanks! Working on a project Jeep with this issue. Watched your video and went to the garage - 30 minutes later and it's fixed.

Thank you so much! I had an issue with my light dimmer not brightening up and this did the trick! Thanks for saving me $129 for a new one.

Thanks man! I could'nt get my hands on a used OR new switch so this helped me ALOT! 🤘

Very easy fix, thanks for the great info and video!

took me 20min. to fix it. Problem solved. So thankfull for this easy solution!

Great clip! I was about to buy the switch, since I have to remove the same items, I'll inspect those connections first. Thank you!!!!

It definitely worked for me!👍🏻 thanks for the great tip.

Excelente video .me ayudó mucho a solucionar el problema de luces de tablero de instrumentos de mi Grand Cherokee. Gracias por compartir tus conocimientos.

Thankyou ! My solder looked fine so expected this totaly not to work .. couldnt believe it i got my dipped beam back and saved 30 quid buying a 20 year old second hand one from ebay

Worked like a charm.

Thank You, great vid! You saved me at least $40!!

Awesome! bad solder in the vic to! causes the "coolant sensor bad" code, If you own a grand cherokee zj get yourself a soldering iron you'll need it

Great video and very helpful, thank you! Doing it now!

Saved me $140 on a new switch. I'd consider myself a amateur solder-er and this worked on the first try

I myself would have done this to ALL of the pins on the board.

my switch was acting up this helped me fix two my original one and one purchased at the junk yard that had the same problem

Nope not the cause of my problem. I have 98 laredo, exact same switch. The dash, radio, console all interior lights and head lights dim up and down randomly. Had the dang switch replaced and still not fixed. The current switch box is here on my desk and all looks fine. I can't find the grounding wire for all this anywhere behind the dash so far. I'm hoping when I do find it there is a weak grounding and I can fix that easily but till then I'm still searching for WHY my dash keeps dimming.

Just gonna buy a new switch, too lazy to do all of this lol but good video bro

Many thanks for this video sir! A question: Can this also be the reason to weak headlights? (i know NOTHING about car electrics) :)

My 97 Larado switch is bad, and it causes my factory alarm to go off flashing my lights, i suspect this could be the issue thanks

Hey, so I have a similar problem, but no flickering whatsoever. I just re soldered all my cracked connections, but I am s still unable to get my lights any brighter than the minimum. Anything I can do besides buy a new one?

nice fix but you should use a little bit of flux to make soldering easier.