Hellcat F6F-5 1/48 | The Inner Nerd

Подписаться 88 тыс.

Просмотров 184 тыс.

50% 1

Eduard Grumman Hellcat F6F-5 in 1/48 scale by The Inner Nerd
Time lapse video of the full build, painting and weathering of the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit as shown by The Inner Nerd
Drop me a tip!
ko-fi.com/thei...
Tamiya 1/48 Vought Corsair F4U-1D Painting - • Tamiya Corsair F4U-1D ...
References;
www.airwar.ru/other/draw
www.cybermodel...
www.net-maquet...
www.grubbyfinge...
Dust in the Pacific?!?! 😱
images.app.goo...
images.app.goo...
images.app.goo...
The first part of this video shows the use of Photo Etched parts and scratch building techniques on the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit to detail hydraulic pipes and electrical cables professionally and cheaply around both the cockpit and wheel bays. Locitite 406 CA superglue is used in this process combined with CA superglue accelerator/activator to join the two dissimilar materials. Also used are details from Eduard Brassin which are additional parts to the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit box
The second part shows the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit surface preparation techniques such as filling panel gaps and seams with Deluxe Materials Perfect Plastic Putty modelling filler/putty and sanding them smooth to get a seamless join between parts using a range of sand papers from 800, 1200, 2000, and 3000p dpi grit papers. Also Black Basing techniques are included in this section using Mr Hobby "Mr Surfacer 1000, 1200 & 1500 Finishing Surfacer" thinned with Mr Hobby Self Levelling Thinner 400 to prime the surface ready for painting, sprayed through an airbrush using Harder & Steenbeck Evolution Silverline Solo Needle/Nozzle: 0.15mm with Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar).
The third part of the video demonstrates the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit using the BLACK-BASING technique to achieve a pre-weathered look and surface texture replicating that of an aged and worn aircraft. Harder & Steenbeck Evolution Silverline is used with Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar). Also included in this section on the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit is the Engine Exhaust painting using Alclad 2 Lacquers (Airframe Aluminium, Aluminium, Steel, Jet Exhaust, Copper & Pale Burnt Metal) and Tamiya clear paints to create a burnt metal effect. 3 layers of Mr Color GX100 Superclear III thinned with Mr Hobby Self Levelling Thinner 400 seal the decals in. This can be decanted and sprayed through an airbrush such as the Harder & Steenbeck Evolution Silverline Solo.
Decals for the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit follow painting with the aid of Mr Hobby Mr Mark Setter & Softer products. These products allow the decal to form to the shapes of the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit panel lines and surface which you can see in the video.
Next is the weathering of the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit. This is started using Abteilung 502 & Winsor & Newton oil paints thinned with white spirit to a wash consistency. Then used as a panel line wash the oil is applied across the Eduard Grumman Hellcat F6F-5 in 1/48 scale model kit to achieve a dirty, grimey & worn look. Further weathering including unthinned Abteilung 502 Oil Paints to create streaking and water marks, along with AK Interactive weathering Pigments (Gun Metal, Russian Earth, Europe Earth, Medium Rust and Pigment Fixer, Worn Effects, Dark Streaking Grime Rainmark Effects) concludes weathering.
Items Used
Airbrush: Harder & Steenbeck Evolution Silverline Solo Needle/Nozzle: 0.15mm Compressor: Badger 1100 with Anti-Pulsation Tank Working Pressure 22psi (1.51bar) Paint: Mr Hobby Mr Surfacer 1000, Mr Hobby Mr Surfacer 1200 & Mr Hobby Mr Finishing Surfacer 1500 thinned with cellulose lacquer thinner Tamiya Acrylics thinned with Tamiya X-20A Thinner Mr Hobby Aqueous Abteilung 502 Oils - Black / Industrial Earth / Olive Green Winsor & Newton Oils - Yellow Ochre / Raw Umber / Burnt Sienna / White AK Interactive Pigments - Gun Metal, Europe Earth, Russian Earth, Medium Rust, Pigment Fixer Vallejo Masking Fluid Winsor & Newton UV Cut Matte Enamel Varnish Brushes: Pure Sable Brush - Various Sizes Glue: Tamiya Extra Thin Cement Tamiya Poly Cement Revell Contacta Professional Loctite 406 CA Superglue Sanding: 3M 600p / 800p / 1200p / 2000p / 3000p sheets & sponges Tamiya Polishing Compounds (Course, Fine & Finish)

Опубликовано:

26 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 341

@stephenullman4534 11 месяцев назад

Such a beautiful job of this magnificent aircraft. The paint is spot on. I'm 70 years old and my uncle flew these birds off the carrier Wasp. He had pictures of him and his buddies on the deck with the birds in the background. You've done an excellent rendition of this bird. Thank you.

@TheInnerNerd 11 месяцев назад

Thank you and what a great insight! Thanks for watching :)

@nackdibby7960 4 года назад

The only thing I find more brilliant than your weathering techniques is the fact you took the time to share it with the rest of us! Excellent build and great tutorial!

@Snoozie09 4 года назад

I've never even thought of using a scouring pad for stippling. And love how you made the anti-slip pads with Mr Surfacer. Genius! So much gold in this, thank you --

@grandpaweber2097 4 года назад

I am very glad I stumbled upon this great video because I have the same model and can use it as a guide. The WWII Grumman birds will always have a special place in my heart, not only because they were war-winning aircraft but because my Nana helped build them during the War. You all know they preferred small-statured folks because they fit in the airframes better, that's where Nana came in; she installed wiring harnesses.

@flymachine 4 года назад

You are a master of your craft, I am an aviation artist and I actually watch your vids to see detailing and finish for my portraits, that's how good you are

@TheInnerNerd 4 года назад

Thank you so much! That's so cool! Thank you for watching and I'm pleased that they are helping you in a unique way. Could you share a link to your work? I'd like to see it :)

@wonderbreadmodelsandhistor1566 2 года назад

A little late perhaps but i love this format with the classical music in the background. Its the next most relaxing thing to building. I really enjoyed this video!

@TheInnerNerd 2 года назад

Thank you. I try to keep the videos a little calmer than I used to for what is hopefully a more relaxing experience lol. Thanks for watching, more like this to come! :)

@nealginn7845 4 года назад

Great job. I would know those tail stripes anywhere. That plane sortied off my father’s ship during WW2. He probably touched it. As a matter of fact he had pictures of that plane from the war. Hard not to get misty seeing it. Great job. Thanks

@alanmooney3466 3 года назад

Cool! My uncle flew a Hellcat! I think he was on the Essex, but I'm not sure.

@alanmooney3466 3 года назад

I think I'm wrong about the name of the carrier..

@nealginn7845 3 года назад

@@alanmooney3466 yes the Essex was CV-9 the first of the class, My dad was on the USS Randolph, CV-15. He was a plank holder of the ship. He never got it though. Wonderful memories.

@Wingnut53 3 года назад

@@alanmooney3466 My grandfather was a Hellcat pilot on the Essex. Didn't expect to see a comment like this watching this video.

@stevegenest2994 3 года назад

@@nealginn7845 #)

@danielblythe5337 3 года назад

In watching this again, I am amazed at color sanding of decal clear coat, a subject not mentioned on other videos. Brilliant idea, and I love the use of lighter panel line shading. A most realistic and outstanding finish, weathering and rivet/stressed skin effect. This plane should be an award winner. All cool man everyone ,everything involved here!

@TheInnerNerd 3 года назад

Thank you. Yes you don't see much flatting of the decals in other videos - especially not aircraft models anyway. I think it helps unify the surface texture better than leaving the decals raised as we always strive to get that painted on look. Having examined a lot of models and methods vs the real life subject and reference images, you find most modellers darken the panel lines, when it should actually be lighter. Taking into account the enviroment the real subject would have been kept in, it would be more likely the panel filled with dust when based in a dry climate vs one that had been operated in a moist and colder one. Thank you and thanks for watching :)

@danielblythe5337 3 года назад

I recently built Tamiya 1/48 Spitfire Mk 5b, and used the 25 year old decals. The Badger liquid Decal Film really works, and kept the Decals together. In decaling it, I noticed alot of film and jagged edges. I thought, I wonder if acrylic clear coat can be color sanded. For the removal of decal clear film edges, and for the sake of not having more clear coat than necessary, and paint smoothness, this seems doable thanks to this informative video. I will experiment first on a scrap project

@gijoeimmortal1868 4 года назад

Beautiful job! I must say this was my Father's favorite aircraft. He was a Navy man and used to talk about this and others. As he was a novice modeler and got me into modeling when I was a wee lad. My first aircraft build was the Revell Stuka back in the early 70s. I enjoy your channel and have learned alot. New subscriber.

@1MakMan1 2 года назад

Your skill, attention and care honor the engineers, pilots and support crew of this historic aircraft.

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@lesmatthews2231 4 года назад

Absolutely stunning job

@lewistaylor1965 3 года назад

Watched this build a couple times now...Lots of info on weathering over dark based aircraft which will be of benefit making my HK 1/48 Lanc...Big thanks for the vid...From Chesterfield, UK

@TheInnerNerd 3 года назад

Thank you and I'm pleased to hear that the video is useful for other models too. Dark schemes are a little tricky to weather compared to the usual greens and greys since a lot of the dirt is dark too. Hope the Lanc goes well! Thanks for watching, Cheshire, UK :)

@chuankityap6160 3 года назад

Loved your videos!! So far you're the most detailed modeller compared with other modellers.

@TheInnerNerd 3 года назад

Thank you so much! I try to put as much thought into my models as I can and try to get more complex with each build. Thanks again and thank you for watching :)

@BennyCFD 4 года назад

One of your most Nerd-A-Licious builds today. I like the idea of fishing line for the antenna. Absolutely brilliant.

@Doglover123-b8d 3 года назад

brother you motivate me to keep building.

@TheInnerNerd 3 года назад

That's great! I hope I can continue to motivate you with building your own models!

@daf827 2 года назад

Wow, the manual skills of a neurosurgeon and the vision of an artist. Brilliant build of one of my favorite WW2 warbirds. I built the Monogram version as a lad.

@TheInnerNerd 2 года назад

Thank you and thanks for watching. This kit is down as one of my favourites WW2 subjects :)

@SprueFascinationChannel 4 года назад

Lovely workflow, enjoyed it.

@danielblythe5337 3 года назад

I just checked the spelling, ( if I remember correctly, may have been named after a person) Frise type hinge. On ailerons having a nose portion just ahead of of hinge axis, and a lower surface in line with lower surface. On your elevator, if in neutral close that gap as per kit part. And or put the individual hinges into those two on each side rectangular recesses in the elevators. The inner and outer cool man, cool! Great build!

@TheInnerNerd 3 года назад

Okay thanks for the info. Thank you for watching :)

@musicmate70 4 года назад

I am blown away by the detail & the care put into these model builds simply superb

@al8955 4 года назад

Greetings from Spain! Awesome build, so much to learn from it... These videos are a great help to cope with these strange times. Very inspiring :-)

@chuankityap6160 2 года назад

Amazing skills and details. Absolutely stunning!

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@kevinhedrich6026 4 года назад

Love the description of work. Much more helpful than just video and text. Beautiful job!!

@craigcampbell242 Год назад

This is the best Hellcat build on RU-vid

@TheInnerNerd Год назад

Thank you and thanks for watching :)

@davidjahn4280 8 месяцев назад

stunning, just bought the latest version of this kit. Cant wait!

@TheInnerNerd 7 месяцев назад

Thank you and thanks for watching:)

@andrewlabat9963 2 года назад

Fantastic model of the most successful fighter of WW2..

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@nadiedeinteres1285 4 года назад

That looks AMAZING, if you put it in a base that looks like an aircraft carrier runway or something like that it would be a museum piece

@MrKrc2002 3 года назад

Very nice work

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@Tribecasoothsayer 2 года назад

Eduard makes such excellent kits and of course legendary add-ons for greater detail. Praise to the Czech people! And these videos are always equally excellent. 👍

@TheInnerNerd 2 года назад

Yes they are great kits - never had a bad one and this was one of the best! Thank you and thanks for watching :)

@MegaDave1962 3 года назад

Very nice video love the weather techniques throughout 🏆👍

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@Christospap Год назад

Absolutely beautiful build!

@TheInnerNerd Год назад

Thank you and thanks for watching :)

@tonymgc82 4 года назад

The splatter using the sponges is a superb idea

@TrueBlueYou Год назад

Niiice!-for years I’ve used graphites and ash from fires; as well as, charcoal along with makeup daubers to create wear and tear. You’re a master at the salt damage to this Navy classic!

@TheInnerNerd Год назад

Thank you and thanks for watching :)

@iannicholls7476 4 года назад

Superb, you’ve given me a lot of weathering ideas for the Airfix 1/24 scale kit. I had just decided to go for this very colour scheme in the larger scale and then I noticed this video. Great timing!

@jcwoodman5285 4 года назад

I did the Night Fighter version & it was a truly great, easy & very Satisfying add to my fighter shelf🤗

@TheMckfly 4 года назад

Great work. Great video. Always a pleasure to watch your builds.

@valtolhurst 4 года назад

Stunning work!

@quannguyenthanh8868 4 года назад

Awesome ! Thanks for sharing.

@GregsModels 4 года назад

Great surface finish!

@jeffreyross-zb8cz Месяц назад

Wonderful job my friend, from Detroit 👍

@TheInnerNerd Месяц назад

Thank you and thanks for watching:)

@Juan_Doooh 4 года назад

Very nice build.

@martinjanik9221 3 года назад

Beautiful job mate 👏🏼👏🏼👏🏼

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@darthhokum Год назад

Perfect work 👍

@TheInnerNerd Год назад

Thankyou and thanks for watching :)

@maxescamilla4597 4 года назад

Love the build and techniques you used. I'll be building my Hasagawa 1/32 Hellcat and you gave me some great ideas, cheers!

@simonwaite5815 4 года назад

Thanks for the great tutorial. No nonsense....love it! And your work simply speaks for itself- well done!

@normansmith8184 2 года назад

Stunning, pretty much says it all for fantastic work. Bravo.

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@SCARFACE-gp4fy 3 года назад

Great build got this kit in my stash think this one will next.

@TheInnerNerd 3 года назад

Thank you. This kit is great, one of Eduard's best from my experience. Good luck and thanks for watching :)

@jeremiahwasabullfrog957 4 года назад

The boot print is ingenious! Vid is pleasant to watch and shows very good technics and new stuff I learned. Especially the sanding which I am always afraid of doing.

@MF-og1ct 4 года назад

Love the scouring pad technique, I have always done that kind of mottling manually with the airbrush. The scouring pad is a much faster method. Edit: I highly recomend Ushi rigging or Ez line. It is a very strechy line that you can make rigging easily with. It comes black, so no need to paint it.

@TheInnerNerd 4 года назад

Thank you and yes I have always done it manually but it was taking far too long on my Kitty Hawk SU-22 Fitter that has 4 tone cameo so had to find a faster way! Seen all these popular airbrush stencils that are about £15 a set and thought you know what... £1 later I have one that can be made truly random 😎 And thanks for the tip. I’ve seen that rigging too but since I mainly do jets I’ve not invested in it but may do so

@xrpadoption3293 2 года назад

Wow...great vid. Talent!!

@ModelMinutes 3 года назад

Another amazing build :D

@TheInnerNerd 3 года назад

Thank you and thanks for watching :) This one was one of my favourites!

@MakingPlasticModels 4 года назад

Great build ! I'm a big fan of profi-packs too .

@derekburnett2728 4 года назад

Next one I get I’ll def get the pro. The weekend warrior is okay, but the extra money for the pro is well worth it.

@mikewilliams4438 2 года назад

Great video yet again, I think the old size nine trick is a cool trademark for all similar builds.

@TheInnerNerd 2 года назад

Thank you. And yes, I'll have to break that out again when I come to another model that needs it ;) Thanks for watching :)

@richardstrumsky7172 4 года назад

Dear Sir: You do some fine work! Excellent!

@ScaleMilitaryModels 4 года назад

Amazing job! One of my favorite ww2 aircraft! Keep it up 👍

@thescalemodelcarguychannel8681 4 года назад

That's Frickin Amazing Work!! Great build my friend

@henrypena2547 Год назад

Super Nice build

@TheInnerNerd Год назад

Thank you and thanks for watching:)

@siberianmodeller 4 года назад

Великолепная модель! Magnificent model!

@jpht1964 4 года назад

Very detailed and skillfully crafted...nice job!

@Iktorn76 4 года назад

Great job.

@omcheeseman 4 года назад

What a beauty!

@matthewrosengren2813 4 года назад

That’s a gorgeous bird, outstanding job. I’ve always liked the Hellcat. It’s right at the top of my favorite fighters list along with, obviously, the Mustang. My other favorites are the Corsair, Thunderbolt and Lightning. Keep up the great work! Cheers from California!😃😎

@TheInnerNerd 4 года назад

Thank you! Yes I like it too and not sure why it's taken me so long to get around to making one 😅I really enjoy making the WW2 fighters now and then as I mainly do the modern jets but they are definately good fun! Thanks for watching!

@matthewrosengren2813 4 года назад

The Inner Nerd Scale Modelling, could you do a bomber next? Maybe a B-17 or B-24

@neilharrison1420 4 года назад

what a outstanding build.

@Евгений-е7щ4о 4 года назад

Отличная работа!!! Как всегда на высоте!

@MrMarcocamp 4 года назад

Very well done!!!!! I love di idea of using the green sponge as brush stencil

@johnmajane3731 4 года назад

Beautiful, I am just starting to learn to use an airbrush, trying to take my modeling up a few notches.

@giorgosgr2 4 года назад

lovely build mate!!!!

@johnashton7261 3 года назад

Wow!! Just Wow!

@TheInnerNerd 3 года назад

Thank you and thanks for watching :)

@KitchenTableModeller 4 года назад

A brilliant build, and really well presented, fantastic 👍👍😁

@petervargas8474 4 года назад

Beautifully done! Great job.

@beat89widmer26 4 года назад

I cant believe i watched the whole video, your work is captivating, very impressive, my hats off to you thanks:))

@TheModelGuy 4 года назад

Daaaaamn! Looks phenomenal! Great work as always

@MrBMBuilder 4 года назад

Lovely work old Chap, most enjoyable to watch!!

@MrDbgmusic 4 года назад

Impresionante trabajo. Enhorabuena. Gracias por compartirlo

@hlcepeda 2 года назад

That's a great looking kit, and a great looking build. The method shown for simulating a stressed skin effect is interesting. I would have thought that the _lowest_ portions for each section (delineated by the rivets, and by inner structures --- ribs/spars/stringers --- beneath the skin) would be _at_ the aforesaid rivets and structure, and not centered within the boundaries of the rivets and inner structure (since the rivets would draw the a/c skin inward). Riveting should pull down the skin along the rivet lines. Therefore, with the unriveted areas being higher, they would "catch" more of the sunlight and appear brighter than the riveted areas (as shown in the b&w pictures). That may explain why stressed skin wasn't noticeable further below the a/c beltline in the photographs; less light there.

@TheInnerNerd 2 года назад

Thank you and yes, this kit was a very nice build - I enjoyed it a lot. You're right and it's what should be expected when looking at other pictures of stressed skin on aircraft like a Lancaster. The bulge of the barrelling is usually in the centre of the panel - the reverse of this. I just copied what I saw and wanted to give it a go on this one. Thanks for watching :)

@hlcepeda 2 года назад

@@TheInnerNerd Bulging notwithstanding, your painting and treatment still results in a very realistic appearance. I haven't whipped up the nerve to do stressed-skin even though I recall reading of a very convincing technique for accomplishing that in an old issue of Finescale Modeler... maybe 30 years ago? I still have most of my issues going back 30 years. I'll go through what I have and, if I still have the article, I'll post a summarization of the technique here, along with the issue date in case back issues are still available.

@hlcepeda 2 года назад

@@TheInnerNerd OKAY, FOUND IT! From the February 1994 issue of _Finescale Modeler,_ page 62. Titled “Producing a stressed-skin look on model aircraft” by Daniel Garsonnin. The technique (reportedly very labor-intensive) requires that the surface being worked on have recessed (or scribed) panel lines. Here’s a very basic step-by-step: *First,* use a No.15 scalpel blade to deepen and (by virtue of the blade’s thickness only) slightly widen the recessed/scribed panel lines. Do not hold the blade in a sideways manner, that is, in a way that would _scrape_ the surface. Eyeball-gauge the number of scalpel passes required based on the scale of the kit being worked on. *Next,* starting with 400-grit sandpaper wrapped around a small piece of foam rubber (and working your way down with finer and finer grit) smooth out each panel line, but not so much that the recessed/scribed panel lines disappear. *Finally,* give the surface a good polish to smooth out the surface even further. That’s it. Per the author, the technique (most noticeable on a metallic-finished surface) would also work on gloss and flat finishes. I should point out that the author’s use of a scalpel was based on his build of an old Hasegawa 1/32 F-86F ( _raised_ panel lines); he had to scribe his own panel lines. I’d say that anyone using this technique should decide whether they need to deepen the panel lines on a kit that came with recessed panel lines, or simply start sanding away as I described. Given the need to avoid complete obliteration of the panel lines, deepening the kit’s recessed panel lines may be required. If I was to work this technique, I’d practice beforehand on a “scrap” kit, or on sheet plastic.

@mikekz4489 4 года назад

Excellent work.

@allgood6760 4 месяца назад

Nice!.. well done mate 👍✈️🇳🇿

@TheInnerNerd 4 месяца назад

Thank you and thanks for watching :)

@panzer-meister 4 года назад

Hi, it's nice work. It's easy to understand painting and step building. Thank you !

@TheGar1968 4 года назад

Excellent tutorial. Lovely build.

@f-4bphantom591 4 года назад

Absolutely beautiful, awesome details you put to your models. Til the next have a good one, you and your family stay safe and healthy and as always take care my friend

@obadiah7771 4 года назад

Awesome! Plain and simple!

@robtompkins1844 4 года назад

Intriguing build, have to buy this kit... had enough of building cars for now. World War II aircraft have grabbed my attention.

@lesthiele4921 4 года назад

A great build, I likec the stressed skin. I look forward to your next build.

@pjs617 4 года назад

Superb model 👍 well made and a great video looking forward to seeing the next project 🙂

@good2us1 4 года назад

Beautiful work! Great job, keep up the good work. 👍

@leroymcgee6803 4 года назад

Excellent work! Makes me want to get one too!

@CharlyBaby77 4 года назад

Great work and great model.

@tizi0728 4 года назад

Brilliant!!

@vincecarrera1482 4 года назад

Salut. Ce que tu fais est toujours au top c'est du grand art comme d'habitude. J'aimerais tellement savoir faire aussi bien... A french subscriber.

@ronaldtartaglia4459 4 года назад

Amazing and very soothing

@ElshanMammadov 4 года назад

Top build and paint job! You can replace gun barrels with injection needle, it will be better.Good luck!

@GordoFlach 4 года назад

Amazing job! Two thumbs up!

@MVeminor7 3 года назад

Nice tail stripes. I love the chromate base. A very nice build and paint job. Thanks for sharing.

@TheInnerNerd 3 года назад

Thank you. I wanted to paint this one up in the order of the real aircraft. I think the Chromate base helped tint the blue slightly over a black base I normally use. Thanks for watching :)

@chrishuffman6734 4 года назад

Stunning build!!

@danieljuggins3439 2 года назад

I'm new to this channel, and although planes aren't top of my likes however I'm mesmerised by your abilities those models look fantastic. Great neration very well detailed 👌

@TheInnerNerd 2 года назад

Hello and welcome. Thank you and thanks for watching, I hope you'll stay :)

@КостянтинЧухліб 2 года назад

very nice

@TheInnerNerd 2 года назад

Thank you and thanks for watching :)

@laRoz67 4 года назад

A beautiful build & great video!

@darson100 4 года назад

Great video and great build

@johnf9484 4 года назад

Love your attempt at the stressed-skin effect, I have not seen this before. I can't help but think it seems a bit overdone on the areas where it is done, and underdone on the rest (please don't take as criticism, I think it's awesome that you undertook the effort in the first place). I wonder if, rather than a scraping approach, it would be possible to use a heat-based approach, applying pressure with a sort of ball-end tamping tool? of course, the heat would have to be controlled very carefully, and would probably result in over-impressions, and strings of styrene being pulled from the surface. Would love to see it tried, tho. Keep up the awesome work!