HEPA VAC - Milwaukee 0940-20 M18 FUEL Compact Vacuum Review 

This is just pain to use. It does not have enough room in the container for a bigger dust, it does not have a hepa filter big enough for smaller dust (like cement dust). It is 4 pieces to clean. It will require cleaning every 2-3 minutes of jobsite work. The opening for the canister is at the bottom! So if you put it on something you could probably get it open. Hose is small and cheap. Why do you need 2 similar floor attachments? And all those flows for 200 bare tool?!

Great review man! This vacuum is going to be perfect for my RV and my truck. And it's hella cheaper than a Dyson! (and most other cordless vacs that are semi-decent). :-)

Not for me, great video dough

The front edge needs to be beveled and maybe higher

I want it to use on carpet jobs. The narrow crow stapler is my favorite tool

They just need a bigger canister and it would be perfect

trash lol come on milwaukee!!

You can dump the container without removing it.

Good video and review.

The Vaccum is too short and you have to be hunch/bend over. Back hurts!

This tool is garbage.. used it once and now the red light flashes saying it’s clogged.. this is after sweeping up with a dustpan and using the vac to clean what’s left… I e been trying to fix it for the past hour or so

A couple of eye screws handle screwed into a piece of wood alien taped to top needs longer or two flex hoses

Put a handle on top with attachment points for shoulder strap needs longer flex hose and extention tube to vacuum out upper cabinets

Good for rvs

Why don't any of you reviewers test this on actual carpet? What a joke. I don't trust you.

I agree. It will barely pick up drywall dust. Actually it doesn’t without getting clogged after a few passes. I love Milwaukee but I swear this is the worst tool I’ve ever bought. I spend more time trying to get it unclogged than anything

A great way to introduce the wife to the Milwaukee tool family.

I lost the cyclone cover where can I buy

It will not work in most "home" environments. It ONLY works on concrete, wood, flat commercial/hotel carpet. It does not work on a "normal" household carpet. It sucks down, and the light turns red and won't move.

Why no bag or box? Don't get me wrong, I love the vac but it's a REAL pain not having something to store this and all of these accessories in my service van

Get some socks please.

My wife will love this vac❤️

I think as a shop Vac for large swarf and wood shavings I think you’re asking a lot it looks crap I would rather have a Henry i.e. pneumatic to do what you’re trying to do as someone else has was commented I think you should try it on a carpet no one is going to use that as a shop vac

CFM??

Do you know how much power in term of kpa? Thanks

I know these are mainly aimed at industrial use ect, but would these run well in the home ?

Dyson: we are king Milwaukee: hold my creativity as I beat you with the advantage of a third of a price and interchangeable batteries.

Maybe a decent vac but the attachments are not made for a construction site

Compared to the other vacuums they make is it a good deal?

A vacuum review without using it on carpet? I have short carpet in my shop office that I would use it for.

This thing is horrible…for a shop you need a shopvac.

No one ever uses a vacuum on low BTW

had to return it and get the makita....Milwaukee vacuum gets clogged up too often and not for tall people

Idk if you’ve tested the Craftsman but if you have. How do they compare? I bought the craftsman for my gf and she loves it but would love one for my garage and it being Milwaukee makes me want to buy it 😅

Some advice everyone, remove the particle separator or it will get clogged pretty often and annoy u. U will not lose suction. It doesn't have the most suction to begin with, but it's a very versatile vacuum.

are you all crazy 200 bucks for the vac maybe 100 you can get a shark or dyson that does a better job, wow milwaukee if it did wet and dry maybe but just dry not a chance in hell

Is the plastic deberé separator supposed to spin . My vacuum keeps having the red light go on and I’m just sucking up dust

Comes with 5ah battery now for 199. I'm buying it

This is perfect for service in the field. Buying one now-Locksmith

Vacuum designed poorly. Too short, doesn't work on carpet other than flat commercial carpet. I have 20+ milwaukee 12v and 20v tools... and I love most of them....this one is one of the worst by far.

This is great for cleaning ur car

Does it work on carpet?

Great review brother , I've been on the fence with this vacuum however after watching your video I think I'll give it a shot...... after all....clean up is part of the job too !!! Do you know if this motor takes advantage of the high output batteries , perhaps giving it some more power. Here's a little tip that I thought everyone knew about but apparently that's not the case. On my vacs , Any attachments that touch the ground I glue very strong magnets that come close to touching the floor...about the same height as the attachment.....that's helps a lot when small pieces of metal that are too heavy to be picked up by the vacuum...and where it really help is with small clipping of corner bead that love to get stuck in the hose. Take it or leave it.....it works for me. Sorry for the long winded post. P.S. Don't skimp out on the magnets....buy good strong ones and you won't regret it.

If it would suck Labrador hair out of cloth car seats, I'd buy it.

I love my Milwaukee tools but I’d have to skip this $200 oversized Dustbuster. Maybe if they sold it for 50 dollars.....

For the price it's great very competitive to a Dyson vacuum if use in a semi commercial setting say vacuuming stairwells are haul ways in a small condo or apartment complex with the M18 battery line there's options

Great video!

weisting time and waisting money , just return

Love all of your reviews man, keep up the good work!

Seems awfully pricey for a glorified dust buster. No thanks