Milwaukee Tool M12 FUEL 1/4" Right Angle Die Grinder Review (2485-22) Mechanics/Metal Fab Must-Have

Подписаться 219 тыс.

Просмотров 320 тыс.

50% 1

3M Roloc 2" Disc Pad Assembly: amzn.to/2OFzBIE
3M Roloc Bristle Disc Grade - 120: amzn.to/2OInb2P
3M 01397 Green Corps Roloc Green Disc: amzn.to/2B2N3hR
Milwaukee Tool has been working on industry-specific tools for some time. Mechanics and Metal Fabricators get a great tool with the new Milwaukee M12 FUEL 1/4" Right Angle Die Grinder. To my knowledge, this is the first cordless right angle die grinder. There have been M12 sanders and polishers that can be fitted with 3M Roloc pads, but never one with the versatility of a die grinder.
Milwaukee Tool always wants to properly compete with the tools that Mechanics are using, so they worked to provide more power than cordless models. Many technicians will tell us that air is free in the shop and they have little benefit in buying battery-powered tools. In this case, users get more power in a size professional service mechanics demand. Milwaukee Tool rates this right angle die grinder at up to 0.3 HP and tells us most pneumatic die grinders this would compare to are .25 HP.
Another benefit to going battery power is the ability to use the 4-Mode RPM control and variable speed trigger to know what the max RPM will be. This allows for a larger range of attachments that might have lower RPM ratings., and the mobility to fit in the tightest spaces.
This is a FUEL tool so it features the Milwaukee POWERSTATE Brushless Motor and
REDLINK PLUS Intelligence hardware and software to keep the tool safe and at its peak performance.
Specifications
Milwaukee M12 FUEL 1/4" Right Angle Die Grinder Kit (2485-22)
RPM: 0 - 24,500
4 Mode RPM Control
Power Output: 0.3 HP
Collet Size: 1/4"
Length: 4.5”
Weight w/ battery: 1.7 lbs
5-year tool warranty, 2-year battery warranty
Includes Milwaukee Tool M12 FUEL 1/4” Right Angle Die Grinder, (2) M12 CP2.0
Battery Packs, M12 Charger, (2) Wrenches, and Contractor Bag.
This tool is also available as bare tool (2485-20)
#MilwaukeeTool #NothingButHeavyDuty #Mechanics

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 306

@312luisr Год назад

I chuck this up ru-vid.comUgkxmwiwyX3ADeryrwvcsiwLeKxme6QNQmGL with some carbide bits and use it almost exclusively for grinding out bad welds.It's quite large in size, but having the handle located right near the tip gives you a lot of control.I'm mostly impressed with how remarkably quiet it is. That alone is enough of a reason to switch from the air-powered alternatives.Tip: It's easy to get a carbide bit to walk/chatter and then break. You can reduce your chances of that happening if you are firm and steady with your material removal. It helps to grab it with a second hand right at the BLACK handle near the bit.

@nicksrandomviews1296 2 года назад

I love using this tool when I do brake jobs it really makes cleaning up the corroded surfaces quick and easy. Good video man.

@Kiaa5679 5 лет назад

Damm. A few years back I decided to go with the Bosch 12 volt line. Should have gone with Milwaukee. They are constantly coming out with great new tools!!!!!!!!!!

@WorkshopAddict 5 лет назад

Bosch seems to be happy with the tools they have out and content adding nothing. I do not know why.

@paulw9732 5 лет назад

Roger JK it’s not too late too switch over or too start a new platform and run both.

@joeframer9642 5 лет назад

Roger JK I have both, Bosch has tools M12 doesn’t. The Bosch 12v planer and router are awesome, the jigsaw is 10x better then the M12. But M12 has better automotive tools.

@theJonnymac 5 лет назад

just get whatever tools you want. don’t let them mentally check you into a battery line. Batteries have to be replaced periodically anyway.

@firebladex8586 4 года назад

@@joeframer9642 Bosch makes the best jigsaws in general IMO

@shawnbowman687 3 года назад

Just ordered mine and a 3/8 m12 ratchet. Milwaukee is on their game with the power tools. My m18 high torque 1/2 impact will put the newest snap on guns to shame and has put a new Matco 1/2 pneumatic to shame also. Thing blows my mind. The mid torque 3/8 is a beast also .

@nickwit21 5 лет назад

Truly amazing to have a cordless die grinder for sharpening, metal prep or anything else with the roloc discs. So many options! I've been waiting for this for months

@NotABot88 10 месяцев назад

You still have it?

@620JK 5 лет назад

Damn, Milwaukee is killing the power tool market. I have a ton of dewalt cordless tools but not because I’m particular to one brand over another, it just ended up that way. The problem is once your in deep with batteries and tools, switching over to another brand is EXPENSIVE. One day when I have $2500 to drop, I’m switching toMilwaukee

@WorkshopAddict 5 лет назад

Keep your eye out for these. This changes a Dewalt battery to Makita. amzn.to/35IuWfi

@dropped_sk8 2 года назад

Real review, it cuts out all the time and heats up for real jobs, air is so much better for this application, it's good for around the house but keep it away from the shop.

@ShawnMc749 4 года назад

That is a nice tool, but a big price tag for such. I would love the mobility of not being tied to an air line since I already have a good selection of m12 tooling. $369.99 (CAD) for tool only puts it out of reach for most hobby users unfortunately, when a good IR right angle air can be had for $99.

@michaeljohnston243 4 года назад

ShawnMc749 they are 170 here in the states at Home Depot, take a road trip!

@FERNANDODELAROSA1 5 лет назад

Milwuakee fan here but not a fan of the dim led they carry on the tools

@JakeNaughtFromStateFarm 2 года назад

Found a badass deal on this, but I’m debating on getting it. $179 for the grinder, 2.0 battery, 4.0 battery, and charger, and bag. Hell of a deal, just debating on if I’ll use it enough. I do have straight and angle pneumatic grinders, but this could be very useful.

@KenyonPayne 5 лет назад

Definitely sold on this, can already see me using this for cleaning gasket surfaces and prepping aluminum for welding

@MrManuel1329 4 года назад

This will be great when getting rid of wheel weight adhesive residue inside wheels definitely going to pick one up for that purpose.

@Kanesgarage 4 года назад

Just bought this the other day, it is absolutely incredible! In my opinion it is one of the best tools they have ever made for M12.

@DR.ELEKTRIK 4 года назад

What about the brushless ratchet?

@017garage9 5 лет назад

Im going to go get one of these on my next paycheck

@jetsetjoey 3 года назад

Dear DeWalt: WHERE is OUR DeWalt Cordless Right Angle Die Grinder & our Cordless Soldering Iron?!? I am sooo close to selling my THOUSANDS of $$$ of DeWalt cordless tools & going with Milwaukee because you are LAGGING...

@jeffreydeutsch7336 4 года назад

My concern is the ability for a 2" roloc to get all the way into a corner. A pneumatic has the motor in the body and a right angle gear drive that puts the chuck at the front edge of the tool.. This one gets rid of that by putting the motor in the head. It saves power and cost but the head apears to be as big as a 2" roloc. I have been cleaning up the drawers of a tool cabinet. Will this tool put a 2" roloc flat against the inside of the drawer sides and back, like an air tool? I could go to a 3" roloc. That fat head concerns me as a 100% replacement for an air grinder. I have been waiting a long time and this is currently the only one out there, except for a very expensive corded German model.. My question is whether the chuck center is less than 1" from the front of the tool? Thank you very much for checking.

@jeremyhanna3852 5 лет назад

Surprised there is no shaft lock button

@mediocreman2 3 года назад

These are total junk, unfortunately. Why? Because they overheat after about 3 minutes of light use. Check out the real reviews. Everything else is perfect about it. I'm returning mine today. I was removing some paper gasket at the lowest speed, not pushing at all in 60 degree weather, and not covering vents. So sad milwaukee doesn't test their equipment. The straight grinder and the 3" cutoff tool have the same problem.

@bulldogblvd 5 лет назад

Just got mine, works awesome, best part, its whisper quiet.

@veelink6345 2 года назад

I'm getting upset with milwaukee and I dont know why I'm not seeing more complaints... there tools are cutting out power way to early I dont know if it is a battery cut out or the tools themselves but my drill cuts out on anything over 1/2" cant use a paddle bit or a hole saw to drill through a 2x4 without resetting the trigger 3 or 4 times do to it cutting out I assume from some kind of protection circuit then both my right angle and strait die grinders cut out even before touching my tool to the material im trying to use it on it makes the tools worthless. My dewalt I can push through a 2x4 with a 2 1/2" hole saw or paddle bits no problem. yes milwaukee will last longer probably because they are limited and turn off as soon as the tool needs to put out any torque. total pos now and lost me and every contractor I've demostrated this to. They make good looking but worthless junk these days

@viperstrike3827 5 лет назад

at school these are the only air stuff we have left we call it the wing wing

@semidemiurge 5 лет назад

hard to believe that this thing has the battery power to run more than 10 or 15 min of use before needing to exchange the battery for another.

@WorkshopAddict 5 лет назад

It will do all of that and much more on the 2.0. Add a 6.0 and it will go forever.

@welcome2myworld1.o89 4 года назад

Soo.... if I need to use only 4,000arpms... you’re telling me it’s going to be dangerous and hard to keep under 4K?

@stephenwgreen78 4 года назад

On the low setting just use 1/2 throttle (like you would on an air one). I just try not to buy low rpm stuff so I don't get stabbed by a million tiny wires😁👍

@jakegingrich7214 5 лет назад

Just can't wait until they get battery power down to the compactness of air tools.

@ftlaud911 5 лет назад

Looks like a great tool. Love the m12 line. So far ratchets and stubby are my favorites. I may add this and the 3inch cutter soon. Was also thinking about the telecoping light as well. Only problem is I have more m18 batteries than m12.

@tboyblack3548 5 лет назад

Hey Bryan I stopped by for another look at the grinder and I can honestly say this would definitely make my job easier and more productive in the mechanic shop I would love to get away from the corded drill for cleaning mating surfaces from what I see Milwaukee hit it out of the park with that die grinder thanks for you time and a chance to win it have a blessed day #workshopaddic

@sickandtiredofcomplaining6574 4 года назад

Never mind 2 wrenches why not a arbor lock button ? Or keyless chuck?

@jeffreydeutsch7336 3 года назад

The one concern I have as a replacement for pneumatic die grinder is the size of the motor head. It appears to stick out further than a 2 inch roloc. For a burr or stone the discrepancy is even more extreme. A pneumatic has the air motor in the handle and uses a rt. angle or 120 degree gear drive to turn the collet. That makes the head very small and it will get into places that this one will not. For example, I am sanding rust from the inside of some tool cabinet drawers that I am restoring. To do the inside of the drawer sides, I would have to use a 3 roloc. With a 2 inch the tool would hit the draw bottom before the disc. I am sure there must be other situations where the big bulky head will prevent it from replacing an air grinder.

@andystoolbox 3 года назад

As a welder this tool is handy, a must have for metal working. Like all Milwaukee stuff it is expensive I would have added that as a draw back in the vid. Thnx.

@Dexter_Solid 5 лет назад

just got mine, seems to really pull down my CP 3.0 right away, like a couple minutes and im down to 2 or even 1 bar on the battery lights, even managed to overheat it with a 2" flap wheel, wasnt going crazy hard or anything, the tool itself heated up too, I think it might be defective.

@WorkshopAddict 5 лет назад

that is not our experience. how hard are you pushing?

@Dexter_Solid 5 лет назад

@@WorkshopAddict Not really all that hard, just taking surface rust off a sub-frame for welding prep, I am used to .5 hp pneumatic die grinders, but this thing seems to stall if I blow on it. I'm going to return it, and try a new one.

@motoXjake 5 лет назад

this is all ive read on facebook comments for these so far as well.

@bendude6748 2 года назад

Just got one of these, I love it. It’s sooo nice not having that ear piercing noise from an air powered die grinder and no more dragging the air line around. It’s absolutely brilliant for grinding welds in tight areas. I’d like to buy the straight one too but I’m not made of money so that will have to wait lol..

@pentiummmx2294 2 года назад

my hearing is damaged from hearing air die grinders a lot when i was at my last job.

@TheTacticalFarmer 5 лет назад

Now we need a straight m12 die grinder

@WorkshopAddict 5 лет назад

With variable speed!

@tommater2724 5 лет назад

It’s coming out they show the straight one on the book that comes with the angle grinder straight will be out very soon

@henrybrooks321 4 года назад

It exists already

@tonytully4943 4 года назад

Thanks so much for sharing this and putting it to the test. Especially beyond what it should be used for. I've been waiting a long time for one of these to come out

@LawF250 4 года назад

I have one and I don't like the fact that if it boggs down at all it shuts off and you have release the handle and restart everytime, unlike air tools.

@ChrisJohnson-rn2ls 4 года назад

LawF250 Agreed.

@10OZDuster 4 года назад

all cordless tools that I know that bogs down need the user to let go or release the switch or turn off to restart.

@ChrisJohnson-rn2ls 4 года назад

The problem is that it doesn’t seem to take a whole lot to big it down. You have to be careful how much pressure you use. Other than that I like it. It does seem to burn through batteries quickly.

@ericcampbell2360 3 года назад

I want one for resealing pans and covers

@AndrewBrowner 5 лет назад

this thing will run carbide burrs with some patience? would save me from stringing together 3 110v compressor to run the pneumatic one continuous

@WorkshopAddict 5 лет назад

It will run carbide without issue, jut a bit different to hold on to.

@king49334 4 года назад

Prices too much.

@lifeisgood070 4 года назад

the real question is.... can I sharpen my lawn mower blade with it. Still can't find a decent way to do my blades

@WorkshopAddict 4 года назад

You can, but with a smaller tool like this it is harder to hold the angle. I would recommend a 4.5" grinder with a flap disk on it.

@Dr_Xyzt 4 года назад

Use a Tormek. :) Just kidding. But that would be sweet!

@josh33025 4 года назад

I use a dedicated 1/4 wheel on grinder. It has a nice flat angle on the disk since I only use that wheel for blades.

@handy__andyy4026 5 лет назад

A clamp on or screw in handle would make it better I think

@oby-1607 5 лет назад

Oh God, another Milwaukee tool I gotta buy. Thanks for the review.

@Levidanielz 3 года назад

Thanks for the review, looks a lot bigger than my mini chicago pnumatic 90 air grinders. Cool tool though.

@hermancm 5 лет назад

I’ll keep my 2-stage compressor and CP right angle grinder. It’s a little noisy but I’ll never have to replace batteries on it and it cost me a third of what this tool costs.

@rockerpat1085 5 лет назад

Absolutely!!! I've been using the same air tool's for 20 years!!! Keep Rocking it out!!!

@jeffhooper3447 3 года назад

I maybe should have watched this video before buying but thank you for uploading!

@Fzoo1429 4 года назад

Why does it stop when using it? I used mine first time today and it kept shutting off all I was trying to do was wire brush clean aluminum

@crbake 5 лет назад

Thx Brian going to pick one up when they come to the store.

@MustPassTruck 3 года назад

Cutting the Cord and the Air Line. Until the batteries all die.

@glenndavis2762 4 года назад

too spendy for what you actually get

@mudpuppy318 Год назад

Bought one, it cannot compare to air for power, it kept cutting out. Returned it same day. I’ll stick with air die grinders for now.

@jeffgenchi5863 5 лет назад

I have been writing Milwaukee for years to make this. So looking forward to get it

@WorkshopAddict 5 лет назад

Glad they listened!

@Jarco101 3 года назад

I've been looking this kind of tool. And when I searched. Your video comes first. Good job Bryan

@shadowzedge5793 5 лет назад

I can almost bet if this is so similar to your air grinders that you instinctively went to move the air hose once or twice until you remembered it doesn't have one. 🤣🤣🤣

@WorkshopAddict 5 лет назад

I did not, but what I did have to do is watch the vents on the motor where I would just use my full hand to hold the forward section.

@TheDragonDelasangre 3 года назад

I really want one but I can buy a .75 HP air one for half the money of even a USED Milwaukee. I use 3" rol-loks and really hog material away sometimes. I need the power. This doesn't sound like it would do everything for me. Maybe I'll buy one on sale sometime for light tasks.

@mfldmike 3 года назад

TBH this tool absolutely sucks... Nothing wrong with the tool, has PLENTY of power but, the issue is the batteries don't last for shit. I had to cut 12 small tacks, and went through 2 batteries? Give me a break...

@treebossmike8818 5 лет назад

Ordered mine yesterday from Acme Tools along with a Pack Out to put it in supposed to ship on Monday can’t wait. Looks awesome thanks Brian great review as always!

@chrisavalos7172 4 года назад

Which accessory kit did you end up going with? I just bought mine as well

@treebossmike8818 4 года назад

Chris Avalos I have kaizen foam so I have my grinder in the small packout organizer. Accessories I got were the 3M Roloc discs.

@paulw9732 5 лет назад

I can’t wait to get one, I wish you would have mentioned price in the vid however to me I don’t think it matters as soon as I see one in store I will buy it

@LilBerb123 5 лет назад

paul w I got mine for 150 tool only

@TwoAMBlacktop 4 года назад

Looks like something cool. But not the cost of 4 air die grinders cool.

@TwoAMBlacktop 4 года назад

It is a very specialized use item. I use a die grinder nearly every day. The air hose attached to it isn’t really that inconvenient.

@TwoAMBlacktop 4 года назад

Isn’t that what Dremel has been doing for years? You may find it useful and think it’s a good price, but personally, I don’t think it’s a good value for the M12 line. It’s definitely way better value than their torque wrenches.

@kvernesdotten 3 года назад

So I recently got one of these, and love it.... Buuuut I also found out that die grinders really is not a thing in my part of the world. They are basically only used by car painters, making them and all their accessories very hard to find, and very expensive when you do find them. What complicates it even more is "die grinder" doesnt even have a name here, its litteraly referred to as a general grinding device so when you search for it, you get EVERYTHING from angle grinders to belt sanders. But it doesnt end there, since we use metric here i get a 6mm collet instead of a 1/4 inch one. 1/4" is equal to 6,35mm and that difference is enough that US made stuff cannot properly fit in it without wobbling like crazy. Not exactly what I want from a cutoff disk that spins at 25 000 rpm, so then buying off the web kinda goes out the window too. So I guess my 2 options are to either sell it, or buy a 1/4" collet which is $60 with shipping and tax... and pray it fits?

@treebossmike8818 5 лет назад

Ordered mine yesterday from Acme Tools along with a Pack Out to put it in supposed to ship on Monday can’t wait. Looks awesome thanks Brian great review as always!

@WorkshopAddict 5 лет назад

You will love it!

@leelantern805 5 лет назад

I'm really impressed with the m12 line, I recently got the 3/8 fuel ratchet and the 1/4 impact wrench and I find I'm using the 12v stuff more and more over the 18v. After serveral hours with the 1/2 hammer drill installing gutter guards I really appricate the lighter power to weight.

@WorkshopAddict 5 лет назад

I agree. The M12 line rocks and will do a lot of work!

@jwilsonhandmadeknives2760 5 лет назад

agree. there are a lot of times when the 18v tools are just too much and you don’t need all that right now. The 12v stuff is just better suited until you need bone crushing power.

@daddyhermanson9737 4 года назад

Confused about your double ended wrench theory? Why would 2 double ended wrenches be better than 2 singles of the correct sizes you need ? If anything 2 double sided wrenches with different sizes on each end would be more confusing ?

@WorkshopAddict 4 года назад

Dewalt sends two doubles and I find that it is easier as I never have to switch hands. I guess it is what you get used to. a spindle lock would be the best.

@photondebuger45 Год назад

I have a 1/4 angle die grinder a pneumatic one i like that is very small and the end where it spins and very compact and it sounds like yours is far faster than mine but it says 20k rpm and yeah i wanted it for the roloc discs the bristle ones. I had it somewhere and i couldn't remember where it was but i found it but hey and electric one? I'm interesteeeeeed i like.

@TheDruxlol 4 года назад

anyone have a bit completely stuck in theirs

@joep9219 4 года назад

My eyes day yes but my wallet say noo!😫

@erichood63 3 года назад

I just cut through a 7/8” hardened steel bolt like butter and still have half a charge on 6.0H battery.

@paulw9732 5 лет назад

Did you happen to test it with a 6.0 I only noticed a 2.0 in vid.? I personally on other tools have noticed performances differences in my m12 line other than run time over the 2.0 or even 4.0.

@WorkshopAddict 5 лет назад

It has all the power I would need with the 2.0 but I did use the 6.0 last night on a different task and it seemed a bit more powerful, but it was a different task and you don't need to push these too hard.

@SuperWayneyb 10 месяцев назад

My only gripe about Milwaukee over here in the UK is the parts are so difficult to get and so expensive you end up throwing the tool away

@joeframer9642 5 лет назад

Great channel, solid review 👍, can’t wait to get the two I ordered.

@jhkcustoms6657 4 года назад

This tool has changed my work life

@MrOmerta 4 года назад

Wrks good on head gaskets jobs just like air one to me but better.

@il_calabresi8672 2 года назад

hi gents would a compact 3amp battery be enough to run this tool or go the xc4amp battery size up?

@TheChakita44 3 года назад

does this require any kind of lubrication? grease or oil? or nothing cause its brushless?

@WorkshopAddict 3 года назад

No lube at all.

@damasydia 4 года назад

Anytime I am interested in a new tool your channel has it

@robertmunguia250 3 года назад

Can that take 3in roloc discs?

@WorkshopAddict 3 года назад

Yes, but it is best to use a 6Ah battery for best performance with them.

@j4y24 5 лет назад

Whats the total length from the back to the front of the disc?

@WorkshopAddict 5 лет назад

That will vary based on the disc and how far it is inserted......... Not sure how to answer that.

@dahut3614 5 лет назад

I can't wait for the cordless M12 bead blaster, which is probably the best tool to clean that intake manifold!

@WorkshopAddict 5 лет назад

That intake manifold is junk. Just used for testing this tool.

@TheTrailblazer1974 5 лет назад

Where do you get those attachments for that grinder, I like that rubber brush??

@WorkshopAddict 5 лет назад

Links in the description.

@whatfreedom7 5 лет назад

Just so you know if you haven’t used them they come in different colors that are different roughness. I know they come in white,yellow and green front he ones I’ve used. They last a long time too.

@CaptainCW 2 года назад

What about orange cookies for grinding down brake pad contact points

@paulciprus9582 2 года назад

Got mine Friday…it’s awesome…just made it better…placed a piece of light cardboard between the trigger and safety lever….now it’s much easier to use..no more flipping that stupid safety lever…😀😀😀…paid $ 139.00 plus tax on Ebay….😀

@adventureswithdougie 4 года назад

Awsome information..Just ordered myself one..

@michaelwright1602 Год назад

I found myself rebuilding a Cummins ISX CM-871... I needed a die grinder to remove several gallons of RTV before I in frame it, no gaskets, just RTV... I bought both the straight and angle Milwaukee units. The straight grinder was nice getting in behind the front structure of the motor where the angle die grinder would not work. As of now, I have been using the 3M Roloc Bristle Discs to remove the RTV from the block. I have to say, these die grinders, are the BOMB! Do not put pressure on these like you would with an air grinder, they will shut down, let the tool do the work. I wish I would have bought these years ago. If you find yourself using a die grinder, I would get both if you are doing engine work, or need to get into odd spaces. And if possible, stick with the 3M Roloc heads and tools, the Chinese stuff is hit and miss at best. As far as run time, and lack of a compressor for a proper die grinder, the batteries are inexpensive, I use the Amazon Chinesium knockoffs, you can get a dozen of them for what you would pay for a couple of Milwaukee batteries. Up to 9 volts, no issues. Beats the minute or two I would get with a 20 gallon compressor.

@BURNETTWEALTHGROUP 2 года назад

I’ve been wanting and needing a die grinder but just couldn’t bring myself to spend the $250 that Milwaukee was charging for it. But now with patience it’s on sale for $149 with a battery. I’m definitely buying that joker today will be at my house tomorrow 8/2/22. Man I can’t wait Thanks a lot for your review you always give great unbiased reviews and I respect your options a lot.

@davidyoung6608 5 лет назад

Great review. Where do you find this chart at 2:47?

@WorkshopAddict 5 лет назад

Good question... I do not remember.

@PeterFeederHQ 4 года назад

I need thisss!!!

@glennbarthelemy2443 4 года назад

That light is totally placed in the wrong spot bad bad call on that one 👎👎

@AntonioClaudioMichael 5 лет назад

Very nice die grinder Milwaukee came out with

@goalie996 5 лет назад

Not just good for mechanics welders out in the field are gonna love this !

@noahnippard9544 5 лет назад

Shawn yeah, but how well will it do with carbide burrs? I really want to know because I want this tool

@goalie996 5 лет назад

@@noahnippard9544 I wanna know that too

@Senkino5o 4 года назад

Most people chuck out the pressed steel wrenches.

@ProbeGT2 2 года назад

2 years later, Dewalt what the F are you waiting for???

@ag034924 5 лет назад

It’s great for a mechanic that does breaks to clean all the parts like behind the rotors and the calipers

@maxwellpeter1598 5 лет назад

Mechanics dont do breaks we wait on parts to do a brake job

@Bos742 5 лет назад

Maxwell Peter agreed, we don’t have time for breaks but will work on brakes all damn day

@fixedit8689 Год назад

I’m a millwright that does some heavy metal fabrication in stainless steel. I used this but to me it’s too slow to do I any real world fabrication. Long run time and torque is needed so it’s back to either pneumatic or electric die grinders. I did find a really good use and it’s to clean weld burns on stainless steel with a wire wheel.

@Nothingtoya 5 лет назад

I just cant imagine the battery lasting long. I really like their 12 volt tools but you always have to have multiple batteries on hand because they die so quickly. Stepping up to the 4.0 batteries are a must .

@MrPhucNguyen 2 года назад

nah 6.0 son

@funfortoys7636 5 лет назад

i'm getting one of those for sure

@reza_dc2 Год назад

I used this tool on my brake caliper and it made an indentation in the metal ..

@JO3haNsum 2 года назад

Nice but too bulky for tight spots😮‍💨

@wesd991 5 лет назад

What's the run time on a 2.0 battery?

@WorkshopAddict 5 лет назад

You could remove the gaskets from 5 intakes on one charge without issue. With light duty work, well over 40 mins. Different if you are pushing it, but die grinders are not meant to be run like that.

@ruffmansavageveteran1345 2 года назад

How does compare to a pneumatic Dotco or Ingersoll-rand with a rotary burr cutting shitty MIG welds?

@WorkshopAddict 2 года назад

These lack the power of the high end pnumatics.

@eddygoodwin7089 4 года назад

my sister was always needing a drill and theres strap on dealer across the road from her so I told her to go buy a impact from the guy. I think her husband shit his pants when she told him it was $400 and I did too. ouch

@aulivn4jc 2 года назад

I have been looking for a corded version of this tool. I can't justify buying a large compressor just for one tool. This battery one is the only other option.

@DIGGER19860 5 лет назад

I bought that die grinder and god damn does that thibg eat batteries like its going out of style. Like on full chooch good luck getting it to last longer than 2 minutes! On a 2.0 battery to!