Тёмный

Hertz Stage 2 Speaker / Amp Upgrade on Harley Davidson Streetglide Before & After with SPL Readings 

Volunteer Audio
Подписаться 24 тыс.
Просмотров 55 тыс.
50% 1

In this video we show you how to install our Hertz Stage 2 audio kit. We'll show you how to flash your radio and install your amplifier and speakers
For Shark Nose
volunteeraudio...
For Batwing
volunteeraudio...
Contact us @
1-844-30AUDIO
Sales@volaudio.com
www.VOLUNTEERAUDIO.com

Авто/Мото

Опубликовано:

 

3 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 153   
@markhd2023
@markhd2023 Год назад
If anyone is on the fence on buying one of their audio packages, don't hesitate, they ROCK! I installed the Stage 2 system (Hertz Speakers and Precision Power 800W amp) and installed it myself on my 2022 Street Glide Special, sound is loud, crisp and clear I am really impressed! Truly plug n play, super easy install, took all of 3 minutes to flash the radio, thanks Volunteer Audio!!!
@volunteeraudio
@volunteeraudio Год назад
Thank you Mark!
@Unjustified_Bot
@Unjustified_Bot 7 месяцев назад
How’s it sound at 70mph?
@rjashworth85
@rjashworth85 2 года назад
Anybody in an around the knoxville area stop by and see Jay, I came from asheville for Jay's service and he did an amazing job. Thanks for the video bike looks good on screen
@volunteeraudio
@volunteeraudio 2 года назад
Thank you so much!
@rjashworth85
@rjashworth85 9 месяцев назад
Just bought rear speaker new radio for you guys to install next month. Jay will be audio guy for life. Great company
@rjashworth85
@rjashworth85 2 года назад
Best decision I made , great customer service. Jay is the reason I will be back to get the lids done. Hertz best in the market so far
@volunteeraudio
@volunteeraudio 2 года назад
Thank you
@nickduplessis3385
@nickduplessis3385 2 года назад
bought this kit install myself after watching. you staff was great help.. thanks
@geraldleatherwood5982
@geraldleatherwood5982 2 года назад
Brought my 16 Roadglide special to Jay and he installed this setup in my lowers in addition to the ground zero yellow baskets in the fairing. Great job and sound. Clear and clean at 80 mph. Plenty of power.
@MrPhipsi74
@MrPhipsi74 2 года назад
Outstanding video! I'm an engineer and I've also done a bunch of car audio installs and done both Boom and Rokker installs on previous bikes. I've been wanting to upgrade my 2020 Road Glide Special and have been looking at better options. The HD Rockford Stage 2 has a built in DSP, but when I found out I had to give up saddlebag space, and cut a giant hole in my saddlebag for a ONE amp install, I eliminated it. RF doesn't have their newer non HD branded kit in stock, so I started looking elsewhere and came upon this video. Extremely clear instructions and I love how you pre-wire the amp with all the connectors. You're solving the exact problem I want to solve (can't hear the stereo when riding). I don't care about the non-riding sound as much, I don't compete. I called your shop and asked some questions, and the tech (female, I didn't get her name) was very helpful. She also told me that the programing tool is no longer single use, but IS locked to the bike. That's a lot better option because I might make changes in the future, so I'll likely keep it. I DID ask a question she couldn't answer, but I'll find out soon. I have a WHIM installed. I suspect that even after this flash, I will still have to have a bluetooth headset turned on to get Apple Car Play to work because the WHIM is now looking for the headset. I'll let you know. It would be nice if that weren't true, because I rarely need the comms when I ride.I just ordered this kit for my bike.
@volunteeraudio
@volunteeraudio 2 года назад
Thank you sir, I appreciate the feedback and your correct I have not attempted to turn on CarPlay with an existing whim to know the results
@MrPhipsi74
@MrPhipsi74 2 года назад
@@volunteeraudio I just did this... it works! Normally the WHIM requires a headset to be present and on. Now it works with or without a headset!
@volunteeraudio
@volunteeraudio 2 года назад
@@MrPhipsi74 great news!
@nafarmboy
@nafarmboy Год назад
Good video, perfect tutorial, it has convinced me I can do this install, but IMHO the best part of the video is your shirt. :)
@volunteeraudio
@volunteeraudio Год назад
Thank you!
@MikeF-g8q
@MikeF-g8q Год назад
I really like how 32:16 the Hertz Stage 2 system sounds so much better than the Boom 4 speaker system, it’s almost night and day difference. Can’t wait to hear it when I add lower speakers to it !
@volunteeraudio
@volunteeraudio Год назад
Thank you for watching!
@mikesen2320
@mikesen2320 2 года назад
Ok...I figured it out at 2am in the morning. The factory leads to the pods were actually pink. I accidently connected these to the wire harness that ran back to the Boom connector. So I then disconnected the two sides and ran both pink sets of speaker wire to the correct leads. Basically I was running the speaking pods to a circuit that was disconnected. Also I ran the ran incoming speaker leads to the incorrect terminals. Anyway. Were good now. It's sounds great! You are the MAN....ONLY THING THAT SUXS IS IM STARTING TO GET THE CHASING THE DRAGON FEEL WHERE ILL NEVER BE SATIFIED. ALREADY STARTING TO THINK ABOUT THE SOUNDSTEAM HEADunit and how much the EQ ON that unit will put me one step ahead of the pack...
@volunteeraudio
@volunteeraudio 2 года назад
Did you watch our video on how to remove the boom harnessing?
@mikesen2320
@mikesen2320 2 года назад
@@volunteeraudio yes. However, I found it AFTER I fixed my issue..lol....just my luck!!Anyway, thank you so much dude. Once again, you ARE THE MAN!
@michaeledmond2724
@michaeledmond2724 Год назад
The customer's bike is really nice. I really like the tail lights, turn signals, and bag covers. I'm wondering if the owner would mind us seeing a list of the items on the bike.
@volunteeraudio
@volunteeraudio Год назад
This has been quite some time ago, I do not have a list of those parts, thank you for watching!
@rjashworth85
@rjashworth85 9 месяцев назад
Ciro latitude tail lights a ciro turn signal light all sequential. My bike fyi
@rjashworth85
@rjashworth85 9 месяцев назад
Much more on the bike though
@davidwatkins6687
@davidwatkins6687 Год назад
So awesome video!! I love how your work bench and wall with tool holders is set up. Do you have a video on that? Could you? Love the organization
@volunteeraudio
@volunteeraudio Год назад
The wall organizer is from a company called Omni wall
@dexterscott7531
@dexterscott7531 2 года назад
Great information video
@glidingisriding5523
@glidingisriding5523 2 года назад
Awesome video I really do love the quality sound of Hertz and your video picked that up no problem. How much is it to rent your flasher?
@volunteeraudio
@volunteeraudio 2 года назад
Call 1-844-30AUDIO to get the details on renting the flash tool
@extremebaggers7817
@extremebaggers7817 Год назад
Why would the Soundz flash not be sufficient?? To much bass ? It just flattens the EQ curve and allows additional amplifiers. Great info on the CarPlay
@volunteeraudio
@volunteeraudio Год назад
The soundz flash is the 8 speaker 2 amp boom flash, we prefer the level of attenuation of the gt or gts radio that we get from the 6 speaker 2 amp flash as most amplifiers handle the input level better and you do not clip the amp input
@chuckmarshall4481
@chuckmarshall4481 Год назад
Jay, this is the system I want on my 2020 street glide. How long would it take you to do it and how much? I’m in Virginia but would bring the bike to you, of corse.
@volunteeraudio
@volunteeraudio Год назад
Give us a call tomorrow at 1-844-30AUDIO to discuss options and pricing
@JoseVazquez-gj8oy
@JoseVazquez-gj8oy 2 года назад
Great videos! Thank you Jay! Can you please help us on why you flash the radio before and not after the installation of aftermarket amps and speakers? Is this because there is no dsp to pair up? If that’s the case then what if the client wants a dsp installed or if the amp has a built in dsp?
@volunteeraudio
@volunteeraudio 2 года назад
We flash the radio to correct a bad factory eq curve, to turn on rear speaker output, to attenuate the radio signal to a useable input voltage and to keep the radios eq consistent when ignition is on and while engine is running, after flashing a dsp is not needed
@JoseVazquez-gj8oy
@JoseVazquez-gj8oy 2 года назад
Thank you for the great information. Would it be best to flash the radio before or after installing the 4 aftermarket speakers and 1 amp with gts radio on 2022 RG limited? I have the all components ready for the installation but I do not have the radio flashed yet. Could I install the system myself and then have the radio flashed at a later time?
@TonyDL
@TonyDL 11 месяцев назад
Really informative video here Jay, thanx! You mention that using your T-harness and the 6 speaker 2 amp flash, the amp will see an acceptable input of around 5 volts. You also mention that some installers "just use the speaker wires and a line output converter" and get less than 1volt input to the amp. Wouldn't tapping the speaker wires WITHOUT the LOC get you the same 5v input for the amp? So my question is... While your T-harness makes it very convenient and simple, can't you also just tap the speaker wires and get the same output/sound?
@volunteeraudio
@volunteeraudio 11 месяцев назад
We are using high level/speaker level signal, out t harness receives all 8 speaker wires into the amp and connects all 8 output wires to stock speaker wiring with one easy connection, you could tap all of these wires but would need to know color codes and polarity. Our connection is much more secure than “tapping” wires
@TonyDL
@TonyDL 11 месяцев назад
I was thinking of getting your Stinger Wiring Kit as a low cost solution for my 2 speaker amp install to avoid tapping wires. Any downside to this compared to the t-harness? If so, do you offer the harness as a separate item?
@volunteeraudio
@volunteeraudio 11 месяцев назад
@@TonyDL yes, you have to make all the connections and we can not preset an amplifier that we have not wired before shipping, our plug n play cost is full wiring and expertly set using oscilloscopes
@Bobbyssportsphotography
@Bobbyssportsphotography 2 года назад
Great video but be nice you zoom in to see what your doing
@mikesen2320
@mikesen2320 2 года назад
Also I noticed that the hertz Amp seemed to get really hot and strange since no sound is coming out....the radio was flashed according to the given instructions also....I dunno dude..kinda lost here. .
@superduty131
@superduty131 2 года назад
Great video. Thanks. Will that AMP handle an 8 speaker setup? 2 @ -upper fairing. 2@ Lower fairing. 2 @ Tourpac. And 2 @ Saddle bags ??? Thanks.
@volunteeraudio
@volunteeraudio 2 года назад
Yes it will, it will do 2ohm stereo so we use it in this exact scenario quite often
@emersongraves5869
@emersongraves5869 2 года назад
Great diy info. Can you refer any installer in Columbia SC ?
@freddychico3621
@freddychico3621 7 месяцев назад
what is the cost of just upgrading the current speakers in a road glide limited and amp?
@volunteeraudio
@volunteeraudio 7 месяцев назад
Here is a great option, but we have many options and you call us to discuss the differences and pricing at 1-844-30AUDIO volunteeraudio.com/product/hertz-sx165neo-sv165neo-6-5-4-speaker-tour-pack-pkg-plug-play-amplifier-with-amp-plate-for-2014-2022-harley-davidson-factory-radio
@freddychico3621
@freddychico3621 7 месяцев назад
@@volunteeraudio thanks
@MK-us7bq
@MK-us7bq 2 года назад
Did I miss where it said how much the rental was for the flash tool ?
@volunteeraudio
@volunteeraudio 2 года назад
The rental tools are at www.volunteeraudio.com, pricing and details are there
@MrPhipsi74
@MrPhipsi74 2 года назад
So, I just installed this package on my 2020 Road Glide Special which had no amp and Boom speakers (I think stage 1 speakers). The good news. I already have a WHIM, but still used the programmer to "turn on WHIM". Now my Apple Car Play works without a headset turned on!! Awesome! So you can answer that question to anyone who asks. My comms still works too. Now the bad new... there's very little bass response. It's loud, but there are no lows.... and I totally get that bass sucks power, and that cutting the bass allows a lot higher SPL, and bass likely can't be heard much at 70mph, but it sounds like it's cut off at 300Hz like a telephone!! Where do you set the high pass filter, even at 115Hz, I think I should be getting more bass. Suggestions?
@volunteeraudio
@volunteeraudio 2 года назад
Hpf is set @ 85hz, what are you listening to? Are you sure your polarity is correct, if one is reversed from the other you have no mid bass, for sure these speakers won’t play very low by design and 6x9’s play much lower (65hz)
@MrPhipsi74
@MrPhipsi74 2 года назад
@@volunteeraudio I'll double check the polarity... I was listening to some 80's Hair Metal.
@volunteeraudio
@volunteeraudio 2 года назад
@@MrPhipsi74 that music has no bass🤣
@MrPhipsi74
@MrPhipsi74 2 года назад
@@volunteeraudio The polarity is fine (black to neg on both sides)... I flipped thru a few other sources... The best way I can describe these is they seem like midranges and tweeters with NO woofer at all... there's no "guts" to it. It sounds very detailed and crisp... I like bright speakers (my home speakers are all Klipsch), but I wish these had more low end. I don't know what freq the HD bass slider is adjusting, but it doesn't change much on these. I'll have to give it a road test to see how I like them on the road... maybe this weekend. I don't want to do speaker lids because they take up too much saddlebag room (I swapped out my Boom lids back to non-speakers on my previous bike). I ride cross country a fair amount.
@volunteeraudio
@volunteeraudio 2 года назад
@@MrPhipsi74 call us at 1-844-30AUDIO, if you primarily listen to 80’s rock or classic rock I have a different speaker for you, 6x9’s help too but I’ll get you took care of
@joekirchner2315
@joekirchner2315 9 месяцев назад
What’s the best Hertz speaker upgrade for my 2023 CVO street glide?
@volunteeraudio
@volunteeraudio 9 месяцев назад
Give us a call and we will be happy to go over options and pricing with you
@mosheramsour1558
@mosheramsour1558 2 года назад
Is there a reason you recommend the boom flash? It goes against what every top installer in the country recommends.
@volunteeraudio
@volunteeraudio 2 года назад
They are all factory boom flashes, there are no soundz flash, Rockford flash, kicker flash ect…. They rename factory flashes
@2savage4today
@2savage4today 2 года назад
The 690’s can handle 300w each. Why only a 600w amp in the 4 speaker kits?
@volunteeraudio
@volunteeraudio 2 года назад
We offer 3 seperate amps, the sx690neo are 130 max rms and still sound great on the Hmp4d, with the hmp4d the system is very reliable and louder than the wind or engine at 100mph, the precision power amp is 100 watt rms and the bigger hertz amp is 160watt rms
@KenOjala-kb5qh
@KenOjala-kb5qh Год назад
Do you have military discount
@volunteeraudio
@volunteeraudio Год назад
We are not offering a military discount in April but hertz amps and speakers are on sale and 10 percent of the total purchase will be donated to the mount pisgah bible printing ministry
@neano62
@neano62 2 года назад
600 watt amp… ok if you’ve got saddlebag lid speakers , four speaker set up , what is ur db increase? Another 14? and what is the db increase with a six speaker set up? With all six channels used is there another 28 to 30 db?
@volunteeraudio
@volunteeraudio 2 года назад
Doubling power or number of speakers usually increases 3db, you get a much larger increase going from stock to more efficient louder aftermarket speakers but once you get so loud it takes a lot to gain more db, you will think it sounds much louder, I say close to twice as loud for every 3db at that point
@johnmaxon3676
@johnmaxon3676 2 года назад
I have a Rockford fosgate amp and speakers how much louder is the Hertz amp in speaker
@volunteeraudio
@volunteeraudio 2 года назад
It is much clearer while being loud, clarity being key, the hertz speakers are 4-5db louder
@rascal22331
@rascal22331 2 года назад
Do you offer similar services for Indian Motorcycles?
@volunteeraudio
@volunteeraudio 2 года назад
We do if brought to us for installation
@mariotrujillo4695
@mariotrujillo4695 Год назад
I want to add lid speakers to my 2014 cvo ultra but want to k ow if I absolutely have to add a amp? I have the tour pack but I made it quick release and want more sound when its off. How can I contact you
@volunteeraudio
@volunteeraudio Год назад
Call 1-844-30AUDIO
@scottmagyar
@scottmagyar Год назад
Awesome Video Sir, question i have 2013 street glide with boom audio stage one with boom amp , i am looking to upgrade to your sound steam package two speaker amp kit with 2 speakers which am do you recommend that will fit on stock bracket and fit the best and sound best the Hertz amp or your smaller precision amp package and which speakers 5.5 or 6.5 , before i buy , thks again
@volunteeraudio
@volunteeraudio Год назад
I would suggest 6.5” and the hertz amplifier
@scottmagyar
@scottmagyar Год назад
@@volunteeraudio so the Hertz amp will not be to big for bracket, and can i use stock amp wiring that in fairing to connect Hertz without taking tank off thks again.
@volunteeraudio
@volunteeraudio Год назад
@@scottmagyar no, the amp will fit, but you will need to run larger power and ground wire from battery
@mikesen2320
@mikesen2320 2 года назад
Heh brotha...I ordered a hertz amplifiar and ppi speaker kit. I connected everything like you did. I have a 2017 street glide with the boom audio. When I turned on the system, the Amp and everything works, BUT THERES NO SOUND..ALSO, I NOTICED that my kit didn't come with a long black wire or the tfitting you used to splice into the cigarette lighter wires. The previous boom Amp has a bundle of wires and a connector that now have nothing to connect too. I traced the speaker wires from the pod to this connector which is hanging free and has nothing to connect too on the hertz amp...WHAT do you think the ISSUE is?
@volunteeraudio
@volunteeraudio 2 года назад
Call our tech support @ 1-844-30AUDIO
@keithwempe3606
@keithwempe3606 2 года назад
Is there a flash you can do for a 2013 Harley stock radio? What do you recommend to improve 2013 sound?
@volunteeraudio
@volunteeraudio 2 года назад
If you are using the stock radio a flash will help the EQ, we normally replace the radio with the AQUATIC AV radio
@greenscapelawncare354
@greenscapelawncare354 2 года назад
👍👍
@brianburkland5868
@brianburkland5868 2 года назад
Did you say in this video that I could rent the flash tool? I have a 2018 ultra limited.
@volunteeraudio
@volunteeraudio 2 года назад
volunteeraudio.com/product/kicker-trhdp
@volunteeraudio
@volunteeraudio 2 года назад
Details are in this link, you buy it and then return it for a partial refund
@dentonracquetball7665
@dentonracquetball7665 2 года назад
What is the cost of entire set of package
@volunteeraudio
@volunteeraudio 2 года назад
Please call 1-844-30AUDIO for a quote
@williamjones6062
@williamjones6062 2 года назад
2019 Road Glide Ultra how much for the 6 speaker kit
@volunteeraudio
@volunteeraudio 2 года назад
There are some variables to pricing it, please call 1-844-30AUDIO for a quote
@wedgin316
@wedgin316 2 года назад
Can I get your contact info so I can order this kit?
@volunteeraudio
@volunteeraudio 2 года назад
You can call 1-844-30AUDIO tomorrow or buy it from our website. volunteeraudio.com/product/sx165neo-hmp4d-2-speaker-factory-replacement-w-amp-for-14-21-harley-davidson
@Tom-jw1pe
@Tom-jw1pe 2 года назад
Can you ship overnight?
@volunteeraudio
@volunteeraudio 2 года назад
We can but it won’t ship till tomorrow now, just select the express option on the website when you check out
@c.r.standards1204
@c.r.standards1204 2 года назад
What if you already have a boom audio 2 with 2 amps and front and rear speakers, on a 2016 ,would it still need flashed?
@volunteeraudio
@volunteeraudio 2 года назад
Yes it would still need flashed
@volunteeraudio
@volunteeraudio 2 года назад
If it’s not a cvo you need to remove the boom harness as well, we have videos on the process
@jamesluster8473
@jamesluster8473 2 года назад
What radio flash do I need if I install this in a 2015 streetglide special with gt nav?
@volunteeraudio
@volunteeraudio 2 года назад
Boom stage 1 6 speaker 2 amp flash
@richnash7762
@richnash7762 Год назад
Do you have to flash a 2009 CVO ultra also ?
@volunteeraudio
@volunteeraudio Год назад
We recommend replacing the stereo on the 2009 but if adding an amp to the stock radio you do not have to flash it
@richnash7762
@richnash7762 Год назад
@@volunteeraudio replacing Stock with a Sony Marine Head unit with 2 better speakers and maybe a small 200 watt amp might put saddle bag cut in 6 by 9 in at later time would 200 amp work for this 4 speakers set up No tour pack speakers or lowers wanted Bike looks like street Glide now not a ultra CVO
@rubenpineiro6704
@rubenpineiro6704 2 года назад
With this kit, is it possible to add the sound stream reserve HDU14 and it still be pug and play?
@volunteeraudio
@volunteeraudio 2 года назад
It is , we also offer this kit with the Soundstream harness built in to the amp harness
@volunteeraudio
@volunteeraudio 2 года назад
Gains would need to be set for the Soundstream radio and we have these changes documented
@funhumanusa
@funhumanusa 2 года назад
Hi. 2021 FLHTK, I would like to add speakers to the lower pods and swap out the fairing and tour pack speakers. Would you recommend the sx 165 neo's all around, and what amp? Do you guys make a wiring harness and/or a kit for that setup? Dsp needed? Thanks
@volunteeraudio
@volunteeraudio 2 года назад
You would need these parts from our website volunteeraudio.com/product/sx165neo-4-speaker-pkg-hmp4d-amp-for-14-21-harley-with-stock-tour-pack volunteeraudio.com/product/hertz-sx165neo-speakers-metra-lower-fairing-speaker-pods-for-harley-davidson volunteeraudio.com/product/volunteer-audio-trhdp-2021
@volunteeraudio
@volunteeraudio 2 года назад
I sent 3 links, the 4 speaker kit, the lower add on for twin cooled lowers and the flash tool to flash your radio. This is everything needed. I have included a link at the end of this message for matching grills that are optional for the lowers. Call 1-844-30AUDIO with any questions volunteeraudio.com/product/hertz-mpg165-3
@fmxfreaker6631
@fmxfreaker6631 2 года назад
where is the link to the flash tool?
@volunteeraudio
@volunteeraudio 2 года назад
volunteeraudio.com/product/kicker-trhdp
@volunteeraudio
@volunteeraudio 2 года назад
You pay $319.95 then when returned within 14 days we will refund $175 after 14 days we start deducting $10 off for each day. This link is for 2014-2020 models
@Ride.on.709
@Ride.on.709 2 года назад
The website currently says nothing is available?? 2018 SG , looking at stage 2 kit
@volunteeraudio
@volunteeraudio 2 года назад
I just clicked the link in the description of this video, 10 available , how did you look for it?
@volunteeraudio
@volunteeraudio 2 года назад
volunteeraudio.com/product/hertz-stage-2-sx165neo-motorcycle-speakers-with-hertz-600w-hmp4d-hd-plug-play-amplifier-for-2014-2022-harley-davidson-factory-radios
@Ride.on.709
@Ride.on.709 2 года назад
@@volunteeraudio can't post a screenshot but : motorcycle-audio kit-2008-batwing....then says none available.
@volunteeraudio
@volunteeraudio 2 года назад
@@Ride.on.709 2008? We have not built the 1998-2013 packages yet
@Ride.on.709
@Ride.on.709 2 года назад
@@volunteeraudio well shit lol That makes sense then.
@ronaldlocurto7337
@ronaldlocurto7337 Год назад
Jay are there any installers up in the Buffalo NY area? 51:30
@volunteeraudio
@volunteeraudio Год назад
I do not have any
@513bamboo
@513bamboo Год назад
How much is that amp?
@volunteeraudio
@volunteeraudio Год назад
We offer several different plug n play amp Options, I suggest using the larger maa4.400 or sp4.900, pricing varies depending on type of Harley and what radio it is being wired for, you can view all amp options at volunteeraudio.com/product-category/motorcycles/motorcycle-amplifiers Or call us tomorrow at 1-844-30AUDIO if you need help choosing the correct amplifier for your install
@josephspencer7829
@josephspencer7829 2 года назад
Do you ship to APO’s
@volunteeraudio
@volunteeraudio 2 года назад
Yes
@TonyDL
@TonyDL 11 месяцев назад
If you flash the GTS radio with 6 speakers - 2 amps as suggested, what voltage range can we expect going to the amp? My amp only allows for RCA low level inputs of 0.5 - 6v. Is there another flash recommended for low level inputs? Thank you!
@volunteeraudio
@volunteeraudio 11 месяцев назад
This flash will be around 5-6volts, also your amp can not use common ground rcas or you will short the radio wiring
@TonyDL
@TonyDL 11 месяцев назад
@@volunteeraudio Ahh, good to know! Thank you kindly 👍
@dipanpatel26
@dipanpatel26 2 года назад
Do u do work on Indian motorcycles?
@davidbattersby625
@davidbattersby625 2 года назад
What model of amp is this and is there a UK stockist
@volunteeraudio
@volunteeraudio 2 года назад
This is the hertz Hmp4d but we do build it with a t harness plug n play for Harley, this setup is only available direct from us @ volunteer audio
@davidbattersby625
@davidbattersby625 2 года назад
@@volunteeraudio do you sell the pre made look on it's own
@volunteeraudio
@volunteeraudio 2 года назад
@@davidbattersby625 volunteeraudio.com/product/hertz-600w-amplifier-pre-wired-to-add-and-amp-a-factory-harley-davidson-street-glide-radio
@TheDolkNess
@TheDolkNess 2 года назад
Hey Jay...what freq do you set the 165 Neo's at for the fairing and Tour Pak?
@volunteeraudio
@volunteeraudio 2 года назад
85hz high pass filter
@TheDolkNess
@TheDolkNess 2 года назад
@@volunteeraudio thanks! Wow 85...I was thinking more 120.
@volunteeraudio
@volunteeraudio 2 года назад
@@TheDolkNess the sx165neo says 100hz - 20khz but in our testing, with an unclipped signal they play 85hz - up clean to full volume
@TheDolkNess
@TheDolkNess 2 года назад
@@volunteeraudio good to hear! I'll be setting gains with an oscilloscope. How much wattage are you feeding them?
@volunteeraudio
@volunteeraudio 2 года назад
@@TheDolkNess we use the Hmp4d from hertz 600 watt max 4 channel, about 65w rms clean
@mikesen2320
@mikesen2320 2 года назад
I CANNOT BELIEVE HOW MANY FREAKING BOLTS HARLEYS USE TO INSTALL THE SPEAKER PODS. THESE GUYS HAVE GOOD INTENTIONS BUT JESUS CHRIST! IS IT REALLY NECESSARY TO HAVE 2 DIFFERENT BOLT TYPES AROUND THE POD, THEN HAVE 3 11MM BOLTS on the side!!! My god it's overkill....
@JBLee-p2t
@JBLee-p2t Год назад
I understood it was plug and play, what is this flash business, I am not happy, I am just thougroughly confused
@volunteeraudio
@volunteeraudio Год назад
They are plug n play but you need to flash the stock radio, we go over this in every video and on all of our packages that use the stock radio, please call us at 1-844-30AUDIO and we can better explain, here is a video on radio flashing Step by Step - How to flash your factory radio when adding a new amp to your Harley Davidson ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-fNDTytYDDw0.html
@0togtr811
@0togtr811 2 года назад
Can't see nothing because your camera is 2 miles away.
@volunteeraudio
@volunteeraudio 2 года назад
Watch this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YJmzJzSCizo.html
@volunteeraudio
@volunteeraudio 2 года назад
Our newer videos have some closer angles
Далее
这位大哥以后恐怕都不敢再插队了吧…
00:16
НЕ БУДИТЕ КОТЯТ#cat
00:21
Просмотров 600 тыс.
1998-2013 H-D Street Glide Stage-3 Installation
21:15
Неужели доедут? 🙈
1:00
Просмотров 366 тыс.
Ini solusinya mobil kalian gak ada sensor mundurnya
0:13