HiBREW H10A Review: 58mm PID Espresso for under $300?

Подписаться 78 тыс.

Просмотров 18 тыс.

50% 1

In this video, we look at the HiBREW H10A, a machine designed and made in China, with 58mm portafilter, included manometer for pressure, and settable PID via display. It also includes a nice milk canister for milk frothing, and a decent 58mm tamper. It does not include a 3-way solenoid, or an easily adjustable OPV.
By the way, I did several more temperature measurement trials after the video. It seems to do a bit better with the temperature stability as the portafilter warms up. Nonetheless, it does tend to heat up a fair amount towards the end of the extraction. In the end, I think your mileage may vary with this, and other PID machines, but pre-heating the portafilter will help.
-- Products used/recommended in this video --
(these are affiliate links that help fund videos like this, at no extra cost to you)
► HiBREW H10A:
🇺🇸 amzn.to/3QBdmmm
🇩🇪 amzn.to/3JQCQbS
Support the Channel, shop on Amazon! amzn.to/3S0jjte
► My Storefront: www.amazon.com/shop/tomscoffe...
► Delonghi Accessories: kit.co/tomscoffeecorner/delon...
► Gaggia Accessories: kit.co/tomscoffeecorner/gaggi...
► Breville Accessories: kit.co/tomscoffeecorner/sage-...
► Grinder Suggestions: kit.co/tomscoffeecorner/grind...
► The espresso glasses I use: geni.us/MontanaEspressoGlasses
Machine source: provided by HiBREW
Beans used: Lavazza Super Crema geni.us/SuperCrema (affiliate link)
----------------------------
*DISCLOSURE: The above Kit.co and Amazon links lead to Amazon, and since I am an Amazon Associate, I earn from qualifying purchases, at no extra cost to you.
#TomsCoffeeCorner #Espresso #HomeBarista

Хобби

Опубликовано:

13 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 161

@TomsCoffeeCorner Месяц назад

Link for those interested: amzn.to/3QBdmmm (affiliate link) By the way, I did several more temperature measurement trials after the video. It seems to do a bit better with the temperature stability as the portafilter warms up. Nonetheless, it does tend to heat up a fair amount towards the end of the extraction. In the end, I think your mileage may vary with this, and other PID machines, but pre-heating the portafilter will help. Thanks for watching!

@eby6613 Месяц назад

Will you upload the temperature trials? I think of moving from the dedica to this

@bcssylf Месяц назад

@@eby6613 you’ll be happy you did 👍

@lahcenelorf592 Месяц назад

Please hibrew h11 review

@PastorJury Месяц назад

I really appreciate your videos. You work through explanations of each machine and product so that I am rarely left wondering about the details or operation. I like that you also bring up comparisons to machines you have reviewed in the past. Thank you for your videos.

@TomsCoffeeCorner Месяц назад

Thanks for your kind feedback! Tom

@davidwilliamson8569 15 дней назад

Really informative video, thank you for sharing your knowledge. Love the various breakdowns of the conponents and the acknowledgement of initial skepticism then noting that it does a fairly good job. I'm very new to espresso, so this would be my first buy. Thank you!

@Ciencias-yc2ob Месяц назад

Thanks Tom. You até THE best!

@Sekyno Месяц назад

Thank you very much for this video Tom, so happy someone I actually trust made a review finally. This is an absolutely incredible machine for the price, even the insides look solid (I was expecting it to be messy but it's actually pretty neat). I feel like these Chinese companies are kicking the butt of established brands lately. For instance seeing this and comparing it to Gaggia is so wild when you look at the price of both machines. Thanks again!

@gosman949 Месяц назад

but it is China and here in the US we are slowing down with Chinese products.

@oliviainsd2103 Месяц назад

Thanks Tom. I mentioned your videos on my Amazon reviews. Hopefully, you will get more subscribers.

@TomsCoffeeCorner Месяц назад

That's kind of you, thank you!

@2nddragoon Месяц назад

Hello Tom, Great video. I liked your systemic approach to describing the machine step by step. Hibrew has a double boiler machine that seems to be very good value and effective.

@TomsCoffeeCorner Месяц назад

Thanks much for your feedback! Tom

@thomasrobinson4401 Месяц назад

Great video, Tom. I have had the H10a since February 2023. It's still going stong. I turn the water knob to release the pressure from the group head. It's a good budget machine. Half the price of the Bambino plus.

@marcoagostoni8827 Месяц назад

i have just paid $330 for the bambino plus refurbished. I think this one is $300 on amazon?

@gosman949 Месяц назад

@@marcoagostoni8827 but the Bambina is a 52 mm portafilter. Less bang for your buck!

@thomasrobinson4401 Месяц назад

@marcoagostoni8827 I paid £239 on Ali express.

@Phil_OG Месяц назад

@@marcoagostoni8827 Yes but there was a 50€ discount in europe

@stephenw1799 Месяц назад

I like having a back up machine and this fits the bill for me, 188 euro from geekbuying. Thanks for the video!

@jefferysaddoris 6 дней назад

Just ordered one of these after watching your video (along with one by Lance Hedrick). Looks like a solid machine for my basic needs. As I told Lance, I'm coming from a Via Venezia which I had for 19 years (The thermofuse and the pump need to be replaced). Still, for $239, the H10A looks like a steal for what you're getting.

@TomJones-tx7pb Месяц назад

Nice review. I especially liked the overview of the internals that show a logical clean layout that is easy to maintain. Some high end machines from Italy have abysmally complex internal physical layouts compared to this machine.

@TomsCoffeeCorner Месяц назад

Thank you for your feedback! Yes, it’s only four screws to remove the lid and you are inside. That’s convenient. The layout is pretty open as well. Cheers!

@paulmusescu4414 Месяц назад

Great video as always, Tom! I love watching your videos as it is so calming yet informative. I was wondering, what coffee do you like or prefer generally speaking? Nowadays, in coffee-related videos, lighter specialty coffees are almost always emphasized and personally I dislike acidity even in the slightest bit. Seeing you using the Lavazza was refreshing.

@TomsCoffeeCorner Месяц назад

Honestly, I prefer something a little on the darker side of medium. I don’t like it too dark, and too light so far hasn’t been my thing either.

@paulmusescu4414 Месяц назад

@@TomsCoffeeCorner Thank you very much!

@guycxz Месяц назад

about the OPV adjustment(19:35 ) coffee_wave went over the process of removing and adjusting the OPV in his review at around 12:00-14:00 minutes. The video is in Russian but the auto-translated captions did a decent job. The process seems like a pain, but not super difficult. You may be able to do it in without taking it apart with a correctly shaped tool(maybe cut a strip from a metal ruler and bend it to shape). I'm not entirely sure from the video(around 12:20) but it seems like there is an additional cover at the bottom of the top part of the machine that can be removed to access it more easily.

@TomsCoffeeCorner Месяц назад

Thank you for that tip, I will have to check out that video soon. Cheers!

@ilanguinguis4180 21 день назад

Hi Tom, thanks for the great detailed review (as always!). I recently saw your review of the MiiCoffee Apex, although I know is in a different price point, would you say is worth the extra money? Which one would you recommend more! Appreciate your work as it helps tons of us to learn and be more knowledgeable about the products. Thanks!

@lwyr9152 22 дня назад

I am considering between H10A and ECP35.31, but H10A is using a 3-ear portafilter, I am afraid of its compatibility. Therefore, I may go for Delonghi. Thank you for your videos.

@Asad-Ullah. Месяц назад

De'Longhi ECP series, are the best ever

@philindeblanc Месяц назад

FYI, if your grinders' bellows cap fits over your funnel you can just place the cap over it and shake vs the needles. Takes one tool and a faster step. Works great for me, but my cap is larger I think.

@kitcraft9516 Месяц назад

This is an interesting one for sure. Not going to make my list but it is neat for sure. As an aside, I saw an ECP 3220(no idea how that differs from the 3420) for $49 and an EC380 for $69 at Gabes yesterday. What a steal for somebody. Thank you for the video as always! I still have the Apex on my mind at this point though, lol.

@user-me8pt8tv5z Месяц назад

be careful, I bought an apex and it turned out to be defective, it showed error e1

@kitcraft9516 Месяц назад

@@user-me8pt8tv5z Oh, thanks for the heads up. That is unfortunate for sure. Hopefully customer service took care of you! I hope that is a fairly isolated incident. I know people who have gotten bad Ascaso machines too, which was also a contender.

@paetgmeiner3620 Месяц назад

Great review. Thanks! I saw that the OPV can be adjusted. If you open it there is a small spring inside and with a screwdriver - left turn decrease preassure. A quater turn is around 1-2 bars. Scaling on Gauge - 10bars between red and green and 5 bars between white and green. 14 bars are to full range It would be interessting if lowering pressure will affect temperature accuracy But be carefull if you open the OPV There is a small red sealing ring which has be set properly HiBREW has another interessting model H10B

@TomsCoffeeCorner Месяц назад

Thanks for that tip!

@SumraKarmus Месяц назад

Классный видос,спасибо :),как раз думаю купить ее...

@riteshramtohul6746 Месяц назад

Thanks for the review. Been using this machine since december, never tried the cold brew 😅 Need to try that

@Sekyno Месяц назад

How do you like it so far?

@riteshramtohul6746 Месяц назад

@@Sekyno works fine. But the temperature is slightly unstable (Just remember to flush a little bit of water just before pulling a shot) and also, the lack of a solenoid valve. I also wish it had flow control, but for the price it's very good. Best to keep money and spend on a good grinder and good coffee instead.

@pedestrian6862 Месяц назад

@@riteshramtohul6746 I truly shocked with that price range it give us bar meter and temp control

@Leviathan83 Месяц назад

Thank you for this review! When you compared it with the dedica, it sounded like you were referring to the new model, so I’m wondering if the comparison to the older models would be the same when it comes to espresso quality/price?

@TomsCoffeeCorner Месяц назад

The espresso I think will be similar, but the H10A has the advantage that you can really raise the temp, which makes it capable for lighter roasts.

@caio1998caio Месяц назад

Could you make a review of the Kitchen Aid 58mm espresso machine? Seems like a good competitor on value for money as well

@TomsCoffeeCorner Месяц назад

Boy, I don’t know. Those things get such terrible reviews on Amazon. It makes me afraid to spend the money on one.

@UnchilenoConAmor 7 дней назад

Tengo entendido que esa cafetera Hibrew es una excelente máquina, de hecho es de las más vendidas y más fiables del mercado modo AliExpress!! ☕✨💚Amor por el buen café! 🙏❤️

@RakanWD Месяц назад

EXCELLENT

@TheLeanPocketMuncher Месяц назад

Hi, Tom. If you had to pick one, would you choose this for $225 or the Dedica Maestro Plus for $350 if you were trying to get the most value for your money? Do you think the Dedica adds enough be worth the extra money?

@DoreK Месяц назад

Hey! H10A Plus is coming soon :) With 3-way solenoid valve (I asked Hibrew directly). They should start production in June. Unfortunately I don't know the price, but the new model should probably be a nice (and complete) upgrade. I hope you will get it and test it :D

@dejedejsson 17 дней назад

You actually have more possibilities without 3 way, you can make blooming shot as long as you want for example.

@JohnPauloSalamat 8 дней назад

@@dejedejsson I saw lance hendrick doing just that in his review video :)

@Tristan_the_ultimate Месяц назад

Been seeing this product since last year and the price is really attractive for all the features it promises. Altho I understand it wouldnt be temp stable. Thanka for the awesome review! May I also ask sir Tom, can you actually pressure profile while pulling a shot by opening the steam knob?

@TomsCoffeeCorner Месяц назад

Yes, you can affect the pressure. Maybe I'll do a follow up short video on that.

@javierguevarra3595 Месяц назад

to get a better brewing temperature i think you have to do kind of "pre-heat" the grouphead some seconds before...

@user-me8pt8tv5z Месяц назад

the group head is made of plastic

@abdulaziz_me Месяц назад

Please do a video of the h7a pro . It's a dual boiler machine, and it's really cheap in comparison to the breville dual boiler machine .

@joaopedrosilva6909 Месяц назад

How do you compare it to the ECP 35.31? Mine just started leaking water... Maybe switch the gasket?

@adonayespinosamontano3940 Месяц назад

Could you test some grinder from hibrew? Thanks!

@pkmc4499 Месяц назад

Great videos. Been watching some of your other videos too. I am wondering between the 3 entry level 3 machines, Delongi EC885, Breville Banbino and this HiBrew H10A, which one gives you a better quality espresso (better for me is more balance). Also, have you measure the pressure on all 3 machines, are they 9 bars rather than 15 bars as they advertised? Thank you.

@TomsCoffeeCorner Месяц назад

Of those 3 so far I'd say the H10A. But I cannot measure the pressure of the H10A or Bambino. The good thing is, you can feather the pressure on the H10A and Dedica via steam knob. Cheers!

@pirkes1 7 дней назад

Great review, Thank you for the thoroughness. Do you have any plans to also make a review to the new Hibrew H7A? I have a really big dilemma between the two machines..

@TomsCoffeeCorner 7 дней назад

I don't plan to review that - it's a white label machine btw. The Kaffeemacher reviewed it though. Hopefully this will help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uEHgooI7xKI.html

@pirkes1 4 дня назад

Thank you for your reply. The machine in the lonk you sent is the H7 which is the older version of Hibrew.

@user-me8pt8tv5z Месяц назад

it has a pre-wetting mode and can be configured, it would be nice if you talked about it

@TomsCoffeeCorner Месяц назад

You mean the pre-infusion? I did mention it when I showed the settings. Cheers!

@pedestrian6862 Месяц назад

Will you try again with bottomless portafilter,sir😁?

@joker927 11 дней назад

Impressive machine. I'm curious if this is better, worse, same as flair 58.

@TomsCoffeeCorner 10 дней назад

Haven't tried the 58 yet. I mean with the Flair you get flow control since you're the pump. So I bet the potential is higher on the Flair. But it cannot do milk, so...

@clementpalisses5675 Месяц назад

Would you recommend this machine over the ecp 35.31 in advanced mode as you presented in your other video ? What are the differences in your point of view ?

@PresidentTio Месяц назад

I have the ecp 35.31, and just bought the Hiibrew. I bought it because it really gives value for the money and you can change many variables. New ims basket and a pucksceen + a bottomless portafilter would make the difference for sure 👍🏽

@adhamgaber462 Месяц назад

should i upgrade to this machine from the gastroback piccolo?

@caps9694 Месяц назад

@TomsCoffeeCorner Hi Tom!! I'm trying to choose which entry level (200-250€) machine I'm gonna buy to entry the "espresso at home" world... which machine do you recommend between this HiBrew H10A,Gaggia Espresso and DeLonghi Dedica (with the mods/tips you suggested in a previous video)? (I'd like to buy also a df54 grinder to combine it with the machine)

@TomsCoffeeCorner Месяц назад

Hi there! I would avoid the Gaggia. The H10A is more capable than the Dedica. But the Dedica has been my trusted workhorse the last five years, so there’s that. I would probably recommend the H10A in this case.

@jeanletourneau9642 Месяц назад

Did you find the pressure gauge useful? They announce a crazy high pressure of 19 bars. Any thoughts? THANKS for honest review. I have an early Breville Duo-Temp (800ESX) that is leaking and cannot be serviced anymore, the diffuser is not available anymore. Companies have variable support depending on models. The Duo-Temp is now a mature machine and bugs were iron out. Shopping for a new model, this is my price range.

@TomsCoffeeCorner Месяц назад

Yes, I really like having a pressure gauge. With it, you can also slightly open the steam wand during the extraction to lower the pressure, and see how your adjustment is affecting the pressure.

@jeanletourneau9642 Месяц назад

@@TomsCoffeeCorner Thanks to take the time answering.

@lahcenelorf592 Месяц назад

Please hibrew h11 review

@ZaRaven Месяц назад

I just bought the Gaggia Espresso (2023 made in Italy), I did not knew that this one existed, maybe I would have liked this (more settings and control, non -pressurized basket etc). Altough, I just tossed a pretty similar China made after 2 years of use because something burned inside and machine died, so idk about these China made anymore.

@oliviainsd2103 Месяц назад

It is reasonably priced though it may be a good backup machine

@TomsCoffeeCorner Месяц назад

I will be curious to see how the longevity of the GED is. It is also a very cheap machine. Cheers!

@2rich2Mr День назад

Hello, what is the thermal block made out of? Aluminum?

@antonioj358 25 дней назад

Thanks for your video. I just received the HiBrew H10A and I would like to buy a new tamper, calibrated to 30 pounds and self-leveling. I have seen the MHW-3 Bomber tamper, but it is advertised as 58.35 mm. Could you please confirm the actual basket size? It seems that the tamper that comes with the HiBrew is 58 mm and doesn't fit the basket completely, so maybe 58.35 mm is okay.

@marcovalente6255 Месяц назад

Whats is the better, HIBREW H5 or Delonghi 3420? Regards.

@abedallahjoulany4459 Месяц назад

Thanks for the review, Can you do a review for the h10b version??

@oliviainsd2103 Месяц назад

Wow, I would be interested in the 10B review too. Maybe they can send you one.

@TomsCoffeeCorner Месяц назад

It actually looks very similar to this machine, but just with a 51 mm PF. I’m guessing the results will be similar.

@abedallahjoulany4459 Месяц назад

@@TomsCoffeeCorner there is another machine , the h7A it comes with a dual boiler, 58 mm PF and a built in grinder, very similar to the breville

@Luka-ns3hf Месяц назад

can you reviw the electrolux explor 6 pleasee?

@Phil_OG Месяц назад

How do you fit your temperature probe between the portafilter and the gasket without leaks? I always wanted to measure the temperature of my machine that why but it leaks so much the the reading are influenced.

@TomsCoffeeCorner Месяц назад

I formed the wire around the lip of the port filter, and gently insert it into the brew group. I try to make sure that the temperature probe sits on top of the middle of the coffee puck. On some machines, it does still leak. With this one, it didn’t.

@Phil_OG Месяц назад

@@TomsCoffeeCorner Thanks for the reply! Have you tried to measure the temperature of the bambino with success? When I try it it always leaks a lot which influences the results

@alexandermuralles4644 16 дней назад

Hey Tom, I’m currently running a Dehlongi Stilosa with all upgraded accessories, and I was using a Baratza Encore ESP but it just broke on me. I saw the H10a machine + G5 grinder bundle just dropped to $399 usd on Amazon! Wondering how you’d compare the H10a to the stilosa as far as shot/drink quality and user experience. Is it worth the upgrade? Also, do you intend to do a video on the Hibrew G5 grinder?? Thank you!

@TomsCoffeeCorner 15 дней назад

Well, the H10A has an adjustable PID which is nice, so you can alter the temp to the bean you're using. But honestly I prefer boiler machines for my med to med-dark roasted beans. Don't know if the PID makes that much difference for me in that case. It is important for lighter roast beans though. As for the G5, I may review that sometime in the future. I'm sure it's a fine grinder - probably like the D40+ or ESP, is what I am guessing. Cheers!

@mushi6577 Месяц назад

Is this better than the ecp 35.31 if i only use for espresso, no steaming milk at all

@TomsCoffeeCorner Месяц назад

Well, I still prefer boiler machines, if I’m being honest. That being said, this machine will do better for you, if you want to dabble in medium and light roasts, since you have more control over the temperature.

@Rithrade Месяц назад

How would this compare to the Bambino Plus? Is there other models to consider in this budget range?

@TomsCoffeeCorner Месяц назад

I like this machine better than the Bambino plus all around. That being said, I don’t know how the longevity will stand up compared to the bambino plus. That remains to be seen, of course.

@ohata0 14 дней назад

what are your thoughts on the ecp 3420/3630 vs the h10a? after buying accessories, the price difference would be around $100 cheaper for the ecp series. how do you think both would do for various roasts, light, med, dark, etc. it seems like the h10a would be more versatile w/ the temp control, but maybe the ecp would still be more stable? also, would you use 58mm or 58.5mm tampers/puck screen for the h10a? do you feel like both would be a good choice as a first espresso machine?

@TomsCoffeeCorner 13 дней назад

They're both good, yes. The H10A is better for different roast beans due to being able to influence the temp. But I quite like the ECP, as I tend to prefer the shots from boiler machines. It's hard to go wrong with either, tbh.

@ohata0 13 дней назад

@@TomsCoffeeCorner thanks!

@yousuffizzani6001 Месяц назад

Looks similar to gemilai 3605, the T junction is plastic , may break or leak after a while , they changed it to copper nowadays

@TomsCoffeeCorner Месяц назад

I don't know any of these to have copper, to be honest.

@HasanAl-Saffar Месяц назад

Thanks, Tom! Do u recommend this machine over dedica?

@HasanAl-Saffar Месяц назад

Oh and do u consider an upgrade to this machine for dedica owners?

@TomsCoffeeCorner Месяц назад

I'd say it's more capable out of the box, but I don't know about longevity yet. My Dedica has been with me for 5 years already...

@Haasaaroni Месяц назад

Great video! How much time did it take to switch into steaming mode?

@TomsCoffeeCorner Месяц назад

Good question - I think around 10 seconds.

@micahweekes 3 дня назад

This, or the Delonghi ecp3420?

@cthulpiss 5 дней назад

will bigger basket fit here? say - 18 or 20 grams?

@TomsCoffeeCorner 4 дня назад

Yes, it's a standard 58mm, so lots of baskets will fit, including deeper ones. At least that's my guess. You can also get a bottomless PF, which can fit all depths of course.

@georgepikmin7095 Месяц назад

what cups are those? they look like the perfect size

@TomsCoffeeCorner Месяц назад

I have a link to those cups in the description. :-)

@ronaldkaplansky1938 27 дней назад

Is there a bottomless porta filter that will fit this

@TomsCoffeeCorner 25 дней назад

Yes, they sent me one. But I think you can get one here: www.aliexpress.us/item/3256804126729678

@Lorec03 Месяц назад

A well done demo, Tom. I saw those Hibrew machines somewhere and was really wondering how this cheap thing can pack so many features. I think that this drip tray is the biggest con of this machine. They should've made it slide out frontally like breville machines (and thus make it accommodate bigger cups). Its definitely an interesting beginners option, a bang for your buck if you will. One caveat is its longevity for sure, but hey that price point. Cheers!

@victorsokol7419 10 дней назад

Благодарю за подробную демонстрацию возможностей этой сверхдешëвой кофемашины! Специально пишу по-русски, чтобы Вы знали, что Вас смотрят и в России.

@Proktel Месяц назад

You must try the Greek Freddo espresso !! Check it out

@Proktel Месяц назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1DJvd3cv9vU.htmlsi=0pf8fc8myOza9vPA

@oliviainsd2103 Месяц назад

Hmmm

@marcatkinson5187 Месяц назад

Hi Tom. I wish you would tell us where each machine is made. As a gearhead type, it matters to me.

@TomsCoffeeCorner Месяц назад

I wrote quite a bit in the video description. If you look up there, you will see that I wrote it is designed and made in China.

@marcatkinson5187 Месяц назад

@@TomsCoffeeCorner oh, sorry!. Cool, Tom.. thanks from a newb👍

@peaceful3250 Месяц назад

It looks like a Breville machine. If so I wonder why they changed the name.

@user-me8pt8tv5z Месяц назад

@@peaceful3250it's not Breville, it's a Chinese company

@peaceful3250 Месяц назад

@@user-me8pt8tv5z Thank you.

10 дней назад

This machine head unit is metal or plastic + metal?

@TomsCoffeeCorner 10 дней назад

That’s a good question. As far as I can tell, it’s metal with a clear film on it on the outside, and if I remember right, it might have some plastic internal bracing.

@olivertrees Месяц назад

this or the bambino plus?

@TomsCoffeeCorner Месяц назад

This one. At least based on performance alone.

@goonhand88 Месяц назад

Und kann man das gute Stück in DE kaufen?

@TomsCoffeeCorner Месяц назад

Kann man. Da muss man zum Glück auch kein Einführungszoll zahlen. Link: amzn.to/3JQCQbS (Affiliatelink)

@tim_tool_man Месяц назад

I prefer magnetic stainless. I cant stand getting esspresso equipment thats non magnetic.

@ronbalut592 Месяц назад

$300 on Amazon now.

@TomsCoffeeCorner Месяц назад

When I click, it’s $225. But I think it fluctuates in price. Watch out for a coupon, there are also coupons sometimes that you can apply directly on the Amazon products page.

@mohammadsibaei2899 Месяц назад

Is it real that it is 20 bar ??

@TomsCoffeeCorner Месяц назад

I doubt it. Unfortunately, my manometer does not fit on the bottom of this Portafilter’s threads.

@mohammadsibaei2899 Месяц назад

@@TomsCoffeeCorner thanks

@iriniyfandi5402 Месяц назад

If possible, show me in a video how to set the pressure to 9 barIf possible, show me in a video how to set the pressure to 9 bar

@Bicloptic Месяц назад

Affiliate link says it’s $300. Hibrew is trying to pull a fast one on us.

@TomsCoffeeCorner Месяц назад

When I click it says %25 off, so $225. Maybe it depends on your region.

@user-me8pt8tv5z Месяц назад

in Russia hibrew sells this espresso machine for $150 :)

@TomeuBarberCardona Месяц назад

I bought it and after 3 months it failed.

@TomsCoffeeCorner Месяц назад

Oh, that’s too bad! May I ask what happened?

@Sekyno Месяц назад

What happened to it?

@user-me8pt8tv5z Месяц назад

Chinese companies have bad quality, I bought a Turin Legato and it broke after 2 shots...

@jamesacido8363 15 дней назад

@@user-me8pt8tv5z even other brands are manufactured in china so it doesn't matter😂

@rosetzu_nagasawa 17 дней назад

i HATE it when HOT WATER goes through plastic tubings. Give a copper tube any day.

@TomsCoffeeCorner 17 дней назад

Well, you will pretty much need a boiler machine in that case.

@spazman345 12 дней назад

All stainless steel is magnetic...

@Leviathan83 Месяц назад

I think i might have found the same machine but from another brand for 100€ less ASIN B0CDXW4G5N . Anyone ever tried this machine by any chance?

@TomsCoffeeCorner Месяц назад

I cannot find that one when I search for it. Do you have a link?

@Leviathan83 Месяц назад

@@TomsCoffeeCorner I’ve tried sending the link and to another possible clone I’ve found but the message didn’t go through or it’s under moderation, give a reply in case they don’t show up and I’ll try something else.

@TomsCoffeeCorner Месяц назад

@@Leviathan83 Sure thing, just go to my website, and send me a message from there. I’ll take a look.

@pierre-monychan3536 Месяц назад

I'm not sure it's the same hardware inside, for example, there's no mention of the adjustable temperature. Search for "Klarstein 1.8L portafilter". Thank you for this very interesting review, I'm new to your friendly but also techy Coffee Corner and was already interested by this H10A after watching coffee-wave's video, now I 'm convinced it 's the right first semi-automatic for me (bought a refurbished one at 90€ with 1 year warranty on a well known four-letters name online marketplace). Again, thank you for your great work at demystifying espresso making, reminding people that even with modest budget they can produce good result is a rare thing in this peculiar hobby.

@Leviathan83 Месяц назад

@@TomsCoffeeCorner done, got the confirmation email