Hidden PC Setting DOUBLES Performance & FPS!! Warzone 3 & Modern Warfare 3 Advanced Settings!! REAL 

This is by FAR the biggest FPS increase I've ever gotten from one setting. I'll test it again on Wednesday when Warzone switches over and I'll update HERE. I some advanced PC videos planned for the New Warzone, remember to Subscribe to get the Notification!!

YOO THIS ACTUALLY WORKED..most videos dont ever help but this one does. Now i have to hope my fps doesnt go back to trash after a day or 2

Dude, this legit made my game run so much better! - Gotta be honjest, When I saw 7mins long I was like, this is going to be some BS... But I was pleasantly surprised. Well Done!

Thanks man That helped !!

you are the first person which gives us REAL and QUICK information, not like the 99% others which are extend their bullshit quality videos to 10 minutes thank you!

Thank you for the knowledge it was very helpful 🤙

Hey bro that’s for the video ! It was straight to the point and thanks for explaining how to add files etc

Dude this is amazing! Thanks for this video! :)

Thanks for your effort Dude, great job👍🏻

holy shit for once this actually works, usually it never works... I'm now at 400 FPS. Thank you, earned a sub.

thank you great video

first video watched on this guy and i tested everything he showed… i like this guy

You earned my sub.

Holy crap amazing video!!! went from 120 avg on warzone to about 160. Def worth!

Looking forward to the footstep audio. Thanks for this video though. I’m running a 3090 and this helped a lot. Thanks bro

You’re earning another sub.

i use 0 or -1 for thread count to fix my desync and speed up my gameplay my graphics card can handle most of the game sbmm doesnt seem to have any effect on my gameplay now i use islc on windows for better system latency and iu setup a minidump for applications on windows the acdvanced system properties also disabled useless and unused devices in device manager nice video dude

do I need to set the notepad file to read only or should I leave it as is?

is it possible to turn shadows off instead of just low?

good video..illl test later....ill sub now...:)

I have a 3090 and an I10900k and it actually gave me less fps on warzone. I was at anywhere from 150-200 and now I’m at 130-180 if that

Almost all new games are forced windowed mode even if it says in game "full screen exclusive". DX12 games are all technically in a windowed mode so "optimizations for windowed games" should always be enabled!

Fast and on Point, ver nice!

Im trying the 2.0 and it feels better, but what about if I have a rtx4090 + 64 gb of ram and an intel i9 ? Can I add more than 2.0?

Although I was already getting good frames in WZ 180ish now I’m getting 200+ FPS. Thanks a million man and this does truly work.

hey man i cant figure out why i cant open the cst file ive tried notepad, notepad ++ n several other things

Render worker count I always set -2 of cores and for amd I set it to the amount of cores.

if you turn on HAGS you have to turn off nvidia reflex in game?

fidelity cas also reduces fps use image scaling at native

Imagine FIRST telling us to put the VRAM in the option to 90... and then changing the notepad config file... not the other way around xD

The file config gave me 30 fps boost . Thank you legend 👍🏽👍🏽

muito bom, mas e quanto a latencia e imput lag.. como fica? pois aumentar os valores dos threads... pela teoria causaria mais latencia, ja que existe um processo a mais para controlar os 16... seria interessante um afterburn com os valores , ver um antes e depois seria maneiro

what operator u using in the vidoe

How it didn’t change fps? I see that the vram got scale up but not any change by the fps

What about VirtualTexturingMemoryMode? Large or Extra Large? Does this matter when raising VRAM to 2.0 for optimal results?

Cant find GPU Scheduling. Windows 10. how do i find it?

i have 3060 ti, how much increase? thanks a lot

Increasing the video memory scale doesn't do anything unless you have settings maxed out and need the vram to hold all the textures, etc. This setting will definitely give you better results for a maxed out benchmark though

Hello the video is amazing man fps has gone right up I am running i7 with NVIDIA 4060 multiplayer and zombies run amazing but warzone my texture takes like a full minute to load in do you know what this could be down to ?

it's weird, my CPU has around 3880 threads. what do i do know since it only allows up to 16?

But using 90 percent gpu makes sense though. wouldnt setting this to 100 percent make it unstable?

I don't have either of the options at 1:57, I'm on an AMD rx 6700 xt, is there any way to get these settings to show up?

I own a 5900x with 3080ti and 32gb of ram..Did everything but nothing changed ...Resizable is on also...

i cannot find the options, in my windows explorer... ive went through my file directories and still came up short?... any advice @kick rocks gaming channel

Where do you find the threads

im on a 7900xt and changing render from 8 cores to 16 threads decreased performance by like 30 percent and causes a cpu bottleneck. along with the 2.00000 thing

Another thing to try is turning the resize bar option in the config under Graphics to “false”, only if you’re on Intel, at least for now. It dramatically helps your 1% lows. Resize bar is supposed to help performance but it doesn’t currently on Intel machines. Your average fps will drop but your lows should jump way up. Mine went from 280 avg/130 1% low to 250 avg/180 1% low ✌️❤️

This was perfect until yesterday after Nvidia dropped a new update smh now I went from 160FPS to 100FPS and stutter

Why do my frames start dropping the second I start shooting?

option.4.cod23 where is steam version dude? i need it

i have an i7-11700k and a 3080, i sepnt so much on the pc to play warzone at 144fps stable, but i cant get to those fps :c

what skin are you wearing in this video?

game mode ON gives less performance, maybe it will help with low end systems, I'm on 7800x3d 4090

where folder in steam file?

So you have a video like this for cold war

2:14 1920x1088 Render resolution?xD

What I don't understand is (correct me if I'm wrong) but changing the VRAM usage has absolutely zero effect on gaining fps especially when you're not even anywhere close to the max vram target. This has to be just a glitch and has no actual meaning behind it.

I hope the performance in the new Warzone is better then what we got last year!

your temps even got lower too damn

Tried this did nothing

Just a quick comment. I have two 'option.4.cod23' files. The edit is done in the 'options.4.cod23.cst' file. As to the thread count, I have a 24 thread CPU, with 12 cores and my setting in the file is 1 less than the core count for optimum performance from the game, so in my case '11'. Thank you for your time and efforts to share this with us all. Much appreciated. p.s. The '2.000000' gave me approximately 50 FPS increase overall on AMD 7900 XT, but I was seeing frame counts upto 243 after the edit. Thanks once again.

dude i have problem 100% gpu suge in loby and in the game its 70-80%

Yea 3080 here made mine dip 20 FPS

i treid all of this, the windows settings to set the game to high performance resulted in a direct x error, every time I booted, my pc has a "let windows decide" option which it had it set to high performance anyway, which allows me to boot no problems. The config change made my results overall and GPU and CPU worse, so I tried a variation of fractions from 2.0 down 1.8 down 1.6 down 1.4 down down down until I was at 0.9 again and that was the best performance I got... I am running a 24 thread i9 HX-13900HX and a Mobile RTX 4080 which is a 12GB card. The BEST boost I got was from the onboard bios where I had the GPU overclock turned on BUT I looked into the settings and I was only boosted150MHZ with 200MHZ being available and clock speed was at 200MHZ boost where 400MHZ was available. I tried all of the settings you mentioned, with and with out these bios settings, nothing here improved my frame rate and nothing resolved the jitter which I see if due to packet burst in the first place. Being hard wired in, on a Gigabit line which I am getting 950ish MB download and 40ish MB upload speeds, I just dont get why I am having these issues... Sadly thought, as a report back, as you asked in the video, none of these settings helped FPS improvement AT ALL for me...

my game stutters hard after playing about 2 games of warzone idk what to do

i did everything but it was still the same can someone help me?

While I’m sure this helped you it does absolutely nothing for a Amd 5900/6800xt build w 64gigs of ram running 1440. Actually introduced some stuttering.

This only works if you have a high end PC that is being throttled by settings, nothing else. If you think your mid end machine is going to benefit, you're wrong

bro has 50gb of vram 💀

Do you know how to reset to normal the options.3?

apparently you get more fps by making the cpu count 1 less than you actually have. so if you have a 6 core, make it 5. ive seen this info multiple times, so try it out.

My default setting 0.9 had better benchmarks then putting it on 2.0 lol specs: i9-12900K 32GB Ram 4070 Ti

what settings do you suggest for a 3050 ti with a i5-12500?

In theory this should be bad (since the game intends to leave some extra vram and threads for background tasks), but we all know things never make any sense, so if it works, than it works

dude this is the best mf video. ive been searching all over and this did it

i'm using RX 570 8gb, is it okay if i set to 2.0000? or try 1.5 or lower

What settings would you suggest for a 2070 super?

Mine was default 16

Why is your render worker count set to 15 if you have a 12 core cpu, try setting it 1 below that your cpu has = 11

Anyone notice their optics like ghosting in this game as their shooting? Mine does with certain optics at certain times and it’s super annoying. Is this because of a performance issue or is this their way of having visual recoil??

i need help i updated my drivers and i still get packet lost and lag ?

Damn if this doubles mine ima be getting 500+ 🤣

Unfortunately, these tips do not work for Intel i7-11700K and an RTX 3060.

didn't really do anything for me sadly

Excuse my ignorance, but where should the highest bottleneck percentage be? in the gpu or in the cpu?

Did this and got less frames

I have a worst gpu and cpu than u still gettin 280 fps hopefully with this setting i can get 300 🔥

my PC still struggling to make it top even 100 FPS lol. im doomed

currently with a R7 5700x, 3060ti, 16gb RAM, what can i get with this specs? RN playing with an avg of 120fps, can i get more

dontr use efficiency cores they slow down your cpu then it has to speed back up which takes time causing you to get instamelted disable efficiency cores in bios then set your fraction to 12 ytou will get more fps from that too e cores are bad im a windows power user btw hags works better on in mw3 but off in mw2 for anyone wondering why mw3 feels better than mw2 this is it hags makes mw2 feel like slow motion

Need help on mw3 why does it say I have a 6.55GB in vram which I have a total of 24GB installed into my laptop. Could anyone help me ?

Just turn off resizeable bar support in your config cst files, that limits your cpu. Turn that off, turn on dlss and you’ll be over 200 fps

so isit cores or threads ? ive watched about 20 diff videos and you all say somthing different from each other lol

2070 super and it didnt change it by a single fps

if your PC does not have 12 GB of video memory, do not increase it video memory scale over 1

So before I watch your video that you say is not click bait, your saying I will double my performance? I'm running at 250 avg fps in MP currently?

the thread count you talk about im not sure its threads. i have 20 threads but it seems the game has a max at 16. i have 14 cores. so it might be cores ??? and then i have some questions about some other settings in that cod folder "options.4.cod23" there is this Sets which memory mode to use for physical textures. 0:Extra small (11x11, 121 slots), 1:Small (16x16, 256 slots), 2:Medium (23x23, 529 slots), 3:Large (32x32, 1024 slots), 4:Extra large (45x45, 2025 slots). VirtualTexturingMemoryMode:0.1 = "Extra Small" // one of [Extra Small, Small, Medium, Large, Extra Large] everyone sets it to extra small. what is it, and what does it do. cuz i run a great system i513600kf and a brand new tuf 4080 super card. 32gb 6800mt ram. 240hz montior, lian li aio. you get it, but i got alot of problems. like texture loads slow when jumping out of parachute and in they are when i look at the hole map, it all loads up slowly as i come closer and point at the buildings and stuff. let me know if you want too help me find a solution then i can show you what i mean.

Hardware-accelerated GPU scheduling in amd rx 6800 i dont have this option😢

Far better than the other guys!!

I made the config folder read only. Every time I open my game it reverts my FOV, brightness, and certain volumes back to what I set them at when I first played the game. Not default. But I can’t figure out how to stop it from changing them back. Any idea?