HikVision NVR Setup Including Hik-Connect NEW

Подписаться 5 тыс.

Просмотров 332 тыс.

50% 1

In this video I'll be showing you how to setup your HikVision NVR from start to finish including how to get it working on your mobile device using the Hik-Connect app
Any donations are welcome via my paypal donation link:
paypal.me/HikG...
#HikVision #CCTV #NVR #bearwatchcctvltd #bearwatchcctv #bear watch cctv
#How To Setup A HikVision NVR
#How To Setup A HikVision DVR
cctv camera installation, hikvision cctv camera connect to mobile, ip camera installation and configuration, hik connect mobile setup

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 455

@Usama_Said 11 месяцев назад

I've been a victim to the so called professionals in this business, for a long time; they've invaded my privacy and wallet, and they've made sure to get me calling them every now and then (with a charge) for some tiny flaw which they invented it by having access to my NVR, without my knowledge. They are criminals down here, so can you just imagine the much appreciation I hold to you releasing this 8 K clarity video? you've just freed me from a never ending stealing my money and privacy. Many thanks HIK GURU

@HikVisionGuru 11 месяцев назад

That’s awful to hear! I’m so glad we could help you. Let us know if we can help with anything else

@dazp6002 Год назад

Thanks for the video, problem now sorted, I must have watched 30 that were useless until I found yours 👍

@NeoPreload 2 года назад

Thanks for the vid very useful. I'll be asking the odd question if that's okay as my NVR has just been fitted and a big learning curve.

@beniamgebremariam8224 5 месяцев назад

Hi! Hik Guru.Thank you for taking the time to share this Video. I've one question. Is it a must to have a router and internet connection to get a remote view from other location ?

@HikVisionGuru 5 месяцев назад

Yes you will need some form of internet connection, Hik do a range of NVRs with a SIM card slot for built in 4g connection if you don’t want a separate router

@beniamgebremariam8224 5 месяцев назад

@@HikVisionGuru Thanks bro. I've one more Q. should I be on the same network to gain remote access from other devices?

@mewsicmaker22 2 года назад

The most comprehensive DIY instructions on the Internet. Brilliant

@HikVisionGuru 2 года назад

Entered! Thank you for the kind words Alan!

@mewsicmaker22 2 года назад

@@HikVisionGuru I am considering getting the hick vision colour view PTZ ,along with a couple of domes ,can you recommend an appropriate 4 channel NVR, and switcher

@HikVisionGuru 2 года назад

@@mewsicmaker22 Hi Alan, which ColourVu ptz are you looking at? Just wanted to make sure that you’re aware it does not have an optical zoom, just a digital zoom. You would require a DS-7604NI-K1/4P Will all of your camera cables be terminating in the NVR? If so you will not need a switch, as the NVR has built in POE.

@peppi7777 2 года назад

Indeed ,best video and explaination on the web. 3 days of searching for info and found this. He is the best for sure. Had a headache trying to find an answer or how to set up.

@vw.addict1013 2 года назад

I have struggled to find many videos online or been shown how to fish cavity walls on the job until now, thanks to you I am confident on how to do this after watching your video. Also being a junior fire and security engineer I have found programming quite technical especially adding cameras from a switch but with this channel all I have to do is scroll through during work and I can easily find what I need to do with an easy step by step video clip in order to get the job done. I can’t thank you enough for creating this account and making my life so much easier when I need it the most. Callum

@HikVisionGuru 2 года назад

Entered! Thank you for the wonderful comments Callum!

@chriszhou6261 2 года назад

thanks for sharing! great video!

@whitneyl123 2 года назад

Hi Hik Guru. This is an awesome video. Very easy to understand and actually does contain everything needed to set up the NVR. Great tips as well. I really appreciate all your support. I’m so glad I found your channel!!

@HikVisionGuru 2 года назад

Entered! Thanks for the kind words Whitney it’s means a lot

@edgarsanchez995 Год назад

The BEST video. Thanks for everything my friend

@GavinM47 2 года назад

Hi Guru, thanks for the videos, I'm in the process of setting up a new system, x5 cameras with a 4k POE NVR (DS - 7608NI-12/8P), do I need a seperate POE switch to power the NVR & cameras or will the NVR power the cameras directly?

@HikVisionGuru 2 года назад

Good morning, the NVRs on board POE will power all of your cameras, all you’ll have is a normal power adapter to plug into your NVR into a mains wall socket. So no need for a separate switch.

@GavinM47 2 года назад

@@HikVisionGuru Morning, Thanks for responding, one more question..I'm using cat 6 cable with 'Ideal cat6 feed through plugs', I've noticed they are extremely tight when plugging into the back of the NVR, they seem too big ! Do you use a particular brand of cat 6 feed through plugs for your installs?

@HikVisionGuru 2 года назад

@@GavinM47 hmm strange, are they crimped nice and tight with no excess cable hanging out? We always use these with no issues: ITBEBE 100 Sets RJ45 Cat6 Cat6a Pass Through connectors www.amazon.co.uk/dp/B0839DMK75/ref=cm_sw_r_cp_api_glt_fabc_0Z0QKH4YJ1HEGTR42213

@GavinM47 2 года назад

@@HikVisionGuru Yes, they are all made off perfectly, the actual plastic case seems a tad too big for the Hik Nvr sockets, I'll try the above plugs instead, thanks again.

@GavinM47 2 года назад

@@HikVisionGuru Hi, Just an update, remade all the plugs using your recommended plugs, they all worked first time, the ideal plugs have been binned! On closer inspection the ideal plugs allowed the individual cables to jump lanes when pulling the plug tight just before crimping, definitely not 'ideal!'

@simonbrown9629 2 года назад

Awesome video …thank you it’s really useful and has helped out heaps. I was having trouble activating cameras but noticed they appear on the nvr anyway…is the activation automatic? Also while the cameras appear on the nvr and via Hik-Connect they don’t seem to appear when I login via a laptop?

@HikVisionGuru 2 года назад

Hi Simon, by default the camera activation is automatic, assuming the cameras have never been used previously and the NVR ports are set to plug and play. Via the laptop, are you using the web interface or software like ivms4200? If you’re using the web interface try going to configuration on there, then local, then make sure that “auto start live view” is enabled and click save. Then click on live view at the top and see if they load. Let me know if you get an error code in the bottom right corner.

@luismiguelmartineza.4568 Год назад

Good day. I just installed a DVR, a couple of Hik vision cameras and an interphone on my home. I was wondering if there's a way to set up an alexa eco show (the one with the diplay) to either display the cameras and/or to be able to answer the interphone. Thanks in advance for your help.

@HikVisionGuru Год назад

Hi Luis, HikVision/Hik-Connect is not directly supported by the echo show, however I believe there are some ways around it by using RTSP, although we don’t have experience using these echo devices I’m afraid.

@tonychilcott2254 2 года назад

Hi Great video. One question - why change 'prefered' DNS setting to Google ?

@HikVisionGuru 2 года назад

Thanks Tony, at the time of making this video these dns settings were always the go to settings for cctv dvrs/nvrs. However now, the best option is auto dns.

@brianken9289 10 месяцев назад

Very clear , Great video

@abidhussain7702 3 месяца назад

Hi i have a question. I connected nvr to 1 port of my company network witch. Now to use another network series to avoid using all camera same IP series how to configure ip addressing in nvr

@HikVisionGuru 3 месяца назад

I would suggest this video here, let me know if you still get stuck How To Add A HikVision IP Camera To NVR Using SADP Tool NEW ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tUnH7O0OCUY.html

@ryanmason491 7 месяцев назад

Great vid! Does this NVR support/have acusense? It's hard to find online - specs say Smart Detection and human/vehicle ID but not sure if that's different from Acusense. Many Thanks

@HikVisionGuru 7 месяцев назад

The NVR used for this video didn’t have AcuSense. The new AcuSense 4 channel NVR product code is DS-7604NXI-K1/4P

@ryanmason491 7 месяцев назад

@HikVisionGuru Ah okay 👍 but if the camera has Acusense you can still use the features like you have in this vid?

@HikVisionGuru 7 месяцев назад

Yes correct 👍

@topbeav7201 3 года назад

Thanks so much I couldn't setup my app without your help

@andyperversi589 2 года назад

Hi Guru. If I don't have a router near my Hik is there a way to connect to the Internet? My camera IP addresses are shown but no picture coming through. Regards, Andy

@callumbaker3957 2 года назад

How do i configure from my laptop? I have a laptop

@HikVisionGuru 2 года назад

Hi Callum, is your NVR/dvr connected to the internet, if so, do you know the nvrs ipv4 address? If not, you can download HikVision’s SADP software and that will be able to tell you. You then want to type in the ipv4 address into internet explorer and from there you can login and start configuring.

@pMultani 3 месяца назад

Feedback: you go through things quickly.Kindly slow down. i installed acusense cameras and with 8 ch 7600 Series NVR. everthing is fine. But i dont get notifications on my phone. Also.I want to see alerts on my phone. My cameras has got lights, alarm and speaker. i dont want neighbours listening alarm and sound. which VCA mode i should be using By camera or NVR.. Apologies for hassle.

@HikVisionGuru 3 месяца назад

I would setup intrusion detection on the NVR, and set detection method to human/vehicle. Make sure intrusion is enabled with the tick box, draw your zone, go to linkage action and make sure “notify surveillance centre” is ticked, this will send notifications to hikconnect. You can set the speaker and strobe lights on independent schedules. You’ll find this under basic event, go to light output settings and audible speaker output settings.

@pMultani 2 месяца назад

⁠@@HikVisionGuru Thanks for advice but i sorted the issue. All working fine.

@pMultani 5 дней назад

Apologies for hassle. All working fine. I am using app for the last many months. I forgot how do we login using initial screeb. How do we relogin using intial black screen we used for set up.

@HikVisionGuru 5 дней назад

⁠is this on hikconnect or on the NVR itself? If it’s on the NVR it should just be a case of right click on screen and left click on menu and it’ll ask for login

@pMultani 5 дней назад

⁠on NVR

@davidb1412 2 месяца назад

Thank you for the video. May I ask, if you use a second drive what format should the drive be in? Ntfs, fat32 or what? Also, if I clone an existing drive in the NVR to a larger drive. Will it just accept it seamlessly?

@jamiekenleyuk 2 года назад

Thanks for videos, very helpful for myself about to launch a security firm. Thats why id like to win a prise aha... can be added towards my startup costs witch are mounting quick!

@HikVisionGuru 2 года назад

Entered! Thank you for the kind words Jamie, all the best with the new business.

@metinkaragoz8047 Год назад

Videoda eksik var mı bilmiyorum, çünkü hiç bilmiyordum, teşekkürler

@1mustafasahbaz 2 года назад

ds7604ni-k1/4p haikon adaptör wolt and watt??

@johnbedford2089 2 месяца назад

Great video and very comprehensive.

@brittenv1000 Год назад

Hi. If I've already had the system up and running is there a way of going back to the start sequence so I can follow your video? Or a factory reset? Trying to view online. Cheers

@HikVisionGuru Год назад

Hello! You can find all the settings in the menus of the dvr/NVR. However, If you wanted the startup wizard like in the video, go to configuration, tick the box “enable wizard”, then reboot the system, when it reboots you will have the wizard. Hope this helps

@brittenv1000 Год назад

@@HikVisionGuru thanks will give that a try tomorrow. 👍

@pauljobes244 Год назад

Bloody marvelous

@007frenske Год назад

Hi ! Great video! Can I also connect DAHUA camera's on the same NVR from Hikvision ?

@HikVisionGuru Год назад

Thanks! Yes you can connect Dahuas

@007frenske Год назад

@@HikVisionGuru Thanks! I did so, reset the camera's, but I don't see them on the NVR :-( Were can I look ? Thanks

@HikVisionGuru Год назад

Depending on your nvrs firmware version, you’ll want to head to the ip camera screen where you can edit/add ip cameras. You may need to change the protocol from HikVision to onvif

@TheMmata 3 года назад

Hi I've start to work as a security installer a year ago and working with hikvision cctv almost every day can you tell me how do you setup resolutions frames etc for the cameras...many thanks for help

@HikVisionGuru 3 года назад

Good morning. If you are on the nvr/dvr's web interface page, you can find these settings under "configuration" "video/audio". If you are using the nvr/dvr's local interface (using a screen) you would go to "menu" "camera" (small icon at the top of screen on latest firmware), then "video parameters" and you'll find the settings in there again. On older firmware you'd go to "menu" "recording" "parameters". If you'd prefer me to make a full video on this explaining the different settings just let me know. Kind regards

@TheMmata 3 года назад

@@HikVisionGuru hi thanks for reply 😊 When you catch time if you can post video about that subject....you deserve more subscribers and video views...explain me more than senior engineers in one year

@HikVisionGuru 3 года назад

@@TheMmata no worries I appreciate it, I’ll get onto the video as soon as possible

@estebanjosh7415 2 года назад

Pleame I'm from Ghana and I know how to install cctv camera but I don't know how I will establish my works please can someone help me out

@lav5958 8 месяцев назад

Hi our HikVision box seems to have stopped working completely - no lights coming from box - have tried everything to get it working again but nothing! Can we buy a replacement box as our one is old without replacing the x3 cameras that we have? I have no clue what to do next! Model: DS-7204HQHI-F1/N/A 01 Any help would be much appreciated please

@HikVisionGuru 8 месяцев назад

Hi! Have you tried a new power supply at all? If not, have you opened the dvr up and unplugged the hard drive there is 2 cables, if you unplug them and then try booting the system up, if still nothing happens then you know it’s the box that’s at fault. You can reuse the hard drive. What megapixel cameras have you got plugged in at the moment? I assume 1080P (2MP) based on the dvr’s model number. If you wanted a new DVR you can keep the exact cameras and connections etc, the new model number is IDS-7204HUHI-M1/FA(C) If you are in the uk we can supply these for next day delivery. It would then be a simple case of removing your old DVR taking the hard drive out, putting it in the new DVR, plugging the cameras in and setup the system on the screen.

@lav5958 8 месяцев назад

@@HikVisionGuru hey That was an amazingly quick response WOW! Thanks! I haven’t opened it up will give that a go at the weekend and see what happens. We have 1080p cameras as you say. What sort of cost for new DVR if I need one?

@HikVisionGuru 8 месяцев назад

@lav5958 make sure everything is unplugged and powered off before you open it, there is always risk in regards to health and safety etc, and you accept full responsibility and we aren’t liable for any injury or damage caused as a result of following my guidance. (Sorry we have to cover ourselves nowadays!) But yeah you’ll be fine, you can look at our hard drive fitting video might be some use to you to see what screws and cables to undo etc. There is actually another product code we still stock that’s a bit cheaper and does the same job, IDS-7204HQHI-K1/2S(C) coming in at £86

@lav5958 8 месяцев назад

@@HikVisionGuru ok will take a look and follow your H&S advice. Let you know how it goes - thanks so much 👍

@vjstorey3350 5 месяцев назад

Chris helped me so much. People like you are so hard to find, but grateful for having found you. Thanks for everything you did!

@HikVisionGuru 5 месяцев назад

No worries it was a pleasure, glad I could help 👍🏼

@sirvayr Год назад

I have a Hikvision 16 channel NVR. Yesterday it started beeping 3 long beeps and 2 short beeps. I rarely log in directly to the NVR. Usually through web browser. When I logged in directly, I see that the menu is now NVR 4.0 and a totally different look. Used to look like the menu that you show in video. right-click with the mouse no longer brings up the menu. Also, now cameras are now some cameras not being picked up. Seems that somehow, motion detection has been turned on on all cameras with entire view blocked out for motion and some IP configurations for the cameras have changed requiring reprogramming. Does Hikvision automatically change the NVR menu? Very annoying.

@FighterPilot1945 10 месяцев назад

Could be the hard drive is full reason for annoying beeping,I had this, HD is not wiping and resetting,check on HDD menu see if it's full if so re initianished reset.

@ZahidMalik-mt2ei 4 месяца назад

Hi - your videos have great content and extremely helpful. Can you please do a tutorial on the DS-7608NI-M2/8P model. I am a little stuck when it comes to configuring - i.e. I have two 4tb hard drives in the NVR, however, only one is displayed. Also, the verification code is not showing when I am following network set up. Your expert assistance would be most welcome. Thanks

@HikVisionGuru 4 месяца назад

If there is only 1 hard drive showing on the list of available hard drives, make sure the second one is properly connected. If not it could be faulty drive. As for verification code, it will be on the platform access screen, it maybe hidden with asterisks’, in which case you’ll need to click on the eye symbol to reveal it. If you’re unsure send me a picture of the screen to info@bearwatchcctv.com Regards Chris

@DkalL_Mc 3 месяца назад

Thanks great video. Very helpful. As I'm IT guy I get calls about absolutely everything. In-laws have had visitors and they have completely messed up and apparently no video signal is showing at all. I'll be using the information in this video to go fix that tomorrow! So thanks. But just wondering if there maybe something they have done to the device that may have caused a no video scenario that you haven't covered in this video? And if so what could cause such a situation?

@HikVisionGuru 3 месяца назад

Nice to hear! Do you know if it’s showing no video or no link? Just trying to establish if it’s an IP or analogue system. On ip systems it shows no link, on analogue shows no video. If it’s IP I’d make sure all cameras cables are plugged into the NVR correctly, I’d then go into the camera settings on the NVR and make sure they’re set to plug and play (unless the cameras have all been setup in static mode). Also make sure you’ve got flashing lights on the poe ports. If it’s an analogue system, I’d make sure the power cable is definitely plugged into the cameras and is operational.

@nadeemuk 9 месяцев назад

Trying to connect ReoLink LAN powered ONVIF camera - cannot get this to work with HIKVISION NVR? Any suggestion

@HikVisionGuru 9 месяцев назад

Have you set the camera to onvif via the NVR ipc adding

@louiswhitman 2 года назад

Thank you so much for this video, made setup incredibly easy!

@DavePowellWeddingPhotography Год назад

Brilliant video. Thank you. Got an NVR arriving tomorrow so this helped massively. 👏 👏

@martytess 8 месяцев назад

How about a video how to setup Hikvision iVMS-4200 remote vieewing? I know there are different procedures for different rounters but at least what ports to forward etc...

@HikVisionGuru 8 месяцев назад

That is one video I certainly do need to make! Thanks for the feedback

@tdhpst Год назад

Hi, my connection status is offline (0xe0000105). Is there something you could suggest I do please?

@HikVisionGuru Год назад

Is your device connected to your network via a cable or something else? On the basic network page what is your ipv4 address? Should be something like 192.168.0.0

@dangross6134 2 года назад

So does it matter where the nvr is located in the network or do the cameras have to be plugged into the nvr.

@HikVisionGuru 2 года назад

Hi Dan, the cameras do not have to be plugged directly into the nvr. They can be anywhere on the network, you would just need a POE injector or a POE switch etc. if you need information on how to add a camera from your network onto your NVR we have a video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tUnH7O0OCUY.html

@dangross6134 2 года назад

Thanks very good info..

@dangross6134 2 года назад

Got my nvr hooked up and everything is working,the nvr is online and the hik connect is enabled,but I'm not getting any notifications on my hikconnect app.any suggestions.

@richiecapuccino9853 Год назад

Having trouble setting up the Hik-connect app. On platform access I don't have a choice for Hik-connect, I have "Guarding Vision" or "ISUP". Any suggestions? it seems to prevent the complete setup of the Hik-connect app. Thanks

@HikVisionGuru Год назад

Hi Richie, if you use guarding vision that should do the trick

@richiecapuccino9853 Год назад

@@HikVisionGuru Thanks but i was confused because that was my only choice and I couldn't get the feed on the app. Turned out after trying different things I had to "unbind" it. Then it worked.

@ThaiMyStyle 3 года назад

Hi, is it possible to remove the record red sign from the live view on the monitor or is it not possible? Thank Icecy :)

@HikVisionGuru 3 года назад

Hi! I’m afraid there isn’t a way to do this at the moment, although I find lots of people do find it annoying and in the way. The only way to do it would be to disable recording. I’ll contact HikVision and see what they say if they can implement a setting in a future update :)

@ThaiMyStyle 3 года назад

@@HikVisionGuru Great Thanks, I don't really mind it but it caused Screen burn on my LG OLED TV and a big cost to replace the screen. Thanks so much for taking the time to reply and please let me know if they do update this. Maybe if they know it's causing Screen burn they may do something. Thanks again Icecy x

@SkeletonTYT_ 5 месяцев назад

Hi! I'm trying to find out how to disable the orange thingy in the top right corner of the screen. I can't seem to get the answer to it.

@HikVisionGuru 5 месяцев назад

Hey! Are you referring to the red square that is in each corner of each camera? If so that’s a recording status symbol meaning that camera is recording. If it’s something else you’re referring to, please send me a picture @ hikguru.yt@gmail.com

@eyetechsecurities Год назад

If we use only Acusense camera, Target detection will enable? If we use normal camera, it won't?

@HikVisionGuru Год назад

Correct, or you can use an AcuSense dvr/NVR instead of AcuSense camera.

@GarotoDeSoftware 19 дней назад

Hi Hik Guru, could you tell me what are the storage options?

@HikVisionGuru 19 дней назад

Hi Garoto, what dvr/nvr model number are you looking at? Different devices have different storage capacities. Usually via an internal surveillance grade hard drive, although there are cloud options for backup purposes

@jmason5013 5 месяцев назад

OK Mr guru im back and have some questions about a couple of problems im having So i linked up one camera to the nvr indoors and then added the app to my phone and got the whole thing working nicely with sound and 2 way audio once that was all working nicely i then bolted it all to the outside of the house and added a further 2 cameras to ports 2 and 3 all 3 cameras work on the nvr and are connected to my phone BUT the first camera i set up indoors works fine with audio of whats going on outside coming to my phone.........but the 2 cameras i added on ports 2 and 3 dont have any audio to the phone i can get 2 way audio on all 3 cameras but i cant hear whats going on outside on cameras 2 and 3 and funnily enough they also dont seem to want to put the spot light on full brightness either ive tried turning audio on at the nvr and desktop screen and ive also turned on the audio button on my phone but no joy would adding those 2 further cameras after getting the first one running be anything to do with it as it is those 2 further cameras that are playing up..??

@HikVisionGuru 5 месяцев назад

Under the recording parameters is the video type set to “video & audio” and not just “video”?

@jmason5013 5 месяцев назад

@@HikVisionGuru OK guru ive had a look and found the parameters page and you were correct.....i didnt have it set as video/audio......thanks for your help and expertise also one thing i noticed just incase anyone is reading this is the audio wont come through on your phone unless you have the video set to HD.........If its just on basic you dont get any audio you da man Hik guru

@TheStar1818 Год назад

Hi, my status (registration status) seems to be offline so i cant connect and i cant connect via the app either

@HikVisionGuru Год назад

Is your dvr/NVR definitely connected to your internet router via a cable? What shows up on the basic network settings page on your device, what is the ipv4 address?

@ahmadniknam9151 6 месяцев назад

Great video , thanks, how do you record this video tutorial, do you use any software to recod monitor screen from

@HikVisionGuru 6 месяцев назад

We use a hdmi capture card that plugs into the monitor which also plugs to the pc

@ashleusM 7 месяцев назад

Thanks very much for this detailed video guide! Super helpful. I'm looking at getting 3 x 8MP (4k) Smart Hybrid Colorvu & IR Acusense IP cameras (DS-2CD2387G2H-LIU). What NVR would you recommend? Not sure whether M-series is needed, or if I-series would suffice? Thanks Hik Guru

@HikVisionGuru 7 месяцев назад

Hello! Yes for x3 8MP you would want the M series DS-7608NI-M2/8P, this has enough decoding resources for your 8MP cameras. The K series or the 4ch NVRs don’t have enough resource. The M and I series are the same price

@ashleusM 7 месяцев назад

@@HikVisionGuru thanks very much! Thats good to know… I wasn’t sure whether the extra expense was needed. But good thing I checked. Thanks!

@ashleusM 5 месяцев назад

@@HikVisionGuru Is there 'portrait' mode capabilities on either this camera or NVR? For example, rotating the camera 90 degrees to give maximum coverage down a narrow path along the side of a house. Many thanks!

@YTenginearmanoj 2 года назад

I am conaet len cable tenda router and hik vision hvr and dhcp eneble but not warking online how to seting my hvr online

@HikVisionGuru 2 года назад

Are you trying to get it working on the Hik-Connect app?

@ZephaniahKen-n8v 21 день назад

Lee Carol Walker Kenneth Rodriguez Karen

@raviananad1395 Месяц назад

If I have to change my router, Will I have to set up everything all over again

@HikVisionGuru Месяц назад

Assuming you setup your device following this video, you won’t have to alter any settings. As long as dhcp is on on the dvr/NVR and you are using platform access to connect to hikconnect then you’ll have no issue

@lindamatthews6941 Год назад

Can you showe how to change setting back to colour . Don't know why it changed

@HikVisionGuru Год назад

Hi Linda, do you mean a colourvu camera back to colour or?

@marloa1957 9 месяцев назад

Can I connect 2pcs hikvision nvr into 1 monitor?

@HikVisionGuru 9 месяцев назад

If the monitor has 2 different inputs then yes

@gogglebox09 Год назад

Excellent video - I was following it to complete the registration and had nearly finished when must have clicked on something and the screen went black. In order to complete the registration I tried to sign in again but it was asking for a password but did not accept any that I had set up. I got a message saying that a verification code would be sent to my e mail address which I had set up and it would arrive in the next 5 minutes - it didn't arrive. Is there any way I can start the registration process again as I can only get the screen showing my cameras but I cant do anything else. Any info would be appreciated.

@HikVisionGuru Год назад

Did you check your junk mail at all? Did you set an unlock pattern on the device at all or just a password?

@FighterPilot1945 10 месяцев назад

Great videos thanks. Question.?.How do you view your CCTV cameras on your Android phone from outside your home eg if your up town or away from home?.

@HikVisionGuru 10 месяцев назад

Our video should be able to guide you through ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8LiiVAV4K40.htmlsi=0c4E0BksNax-N3hk

@michaelgf7524 Год назад

Hi Guru, I try to connect with Synology NAS; how does this work?

@johnnygreen7368 3 года назад

Can I make the trigger zone not notify me when I come in the zone or even when my car is there

@HikVisionGuru 3 года назад

Hi Johnny, do you mean set an exception for you and your car specifically so it only triggers at other people and not yourself?

@sidim2802 2 года назад

I have 4 mp dome cameras hooked on a Hikvision nvr, I can’t hear no sounds from the kitchen dome camera and I think it has a built in mic , any ideas 💡on what could be the problem ?

@HikVisionGuru 2 года назад

Hi Sidi. Have you got the full product code of the camera and we’ll be able to check if it has a built in microphone. Normally you have to enable the video and audio stream in the parameter settings, which by default is video only.

@hidayanoor9160 2 года назад

Hi, my HDD has stopped recording. Would I have to change the hard drive for it to start recording again or is there any other solution? I have tried a few things and it starts recording again but as soon as I turn the tv off it stops

@HikVisionGuru 2 года назад

It’s your recorder making a beeping sound at all? Was it working ok before? It could be a few things, either the recording schedule is not set, maybe off or set on motion schedule? Or your hard drive is faulty. If you go to the storage page on the recorder you should see your hard drive listed, if it’s not listed it’s not recognising any hard drives. Let me know if this helps or you need more information

@weareonlynumber Год назад

Hi, Does anyone know what will be the RTMP address with user authentication? On RU-vid, only a key is required. I need to connect to a server that requires authentication Currently I did it like this: rtmp://my_server_/name_session/login&password/live_key But it doesn't work properly, it connects but no video stream Any idea for that?

@jmason5013 3 месяца назад

hello again hik guru......i have a new annoying problem if you could help..?? ive unplugged everything and moved my hardrive box and screen to the loft and when i turn it back on my phone is now not finding it i thought i might have to rescan the QR code but didnt want to do it yet incase there is a simple thing im missing..?? phone is just saying "device offline please check its network connection".....grrrrrr

@HikVisionGuru 3 месяца назад

Hey! Have you got an internet connection to the loft, either via a hard wired cable to your dvr/NVR or using powerline adapters?

@jmason5013 3 месяца назад

@@HikVisionGuru yes mate....its wired exactly the same as it was before i moved it to the loft.....hardwired into the modem downstairs

@jmason5013 3 месяца назад

@@HikVisionGuru its actually working as it did before in the loft with the cameras up on the main screen......but my phone is saying it cant connect and is offline.....its been like it for a few days now

@HikVisionGuru 3 месяца назад

@jmason5013 using the screen go to system, network settings, send a picture of that screen to me at info@bearwatchcctv.com Also then go to advanced network settings, platform access, make sure it is enabled and check the status if it says offline/online

@jmason5013 3 месяца назад

@@HikVisionGuru OK just sent you an email with pictures of the screen....it is saying "offline" and doesnt seem to want to give me any joy after hitting the "fix" button

@templaruddin 2 года назад

Hello. My office is currently using the 4port and its full. they want to add another 2 cameras. can i just plug in a switch to one of the port and adding the cameras there?

@HikVisionGuru 2 года назад

Hi there! Yes you can do, if not buy a bigger switch and plug them all into that.

@futset8531 Год назад

😀Super useful video. Thanks a lot. Save me a lot of time. Thanks a a lot for this great video with every step very well explained.

@peterkapusta1630 Год назад

Hi Guru. Thx for the video. Very nice. However did not fix my problem :( I did all steps as in your video but, on my Hik-connect app, I can not access the live or recordings when I am OUT of my network. E.g. when I am on the same local intranet like the CCTV, on Wifi with my mobile. All is working. But when I left home and I am out of my home wifi. So I am connect via my mobile phone data service. I CAN NOT ACCESS ANY LIVE VIEW or RECORDING. I can not connect to NVR at all :( The same it is when I am connect to my fried Wifi, out of my home address. I was always thinking that HIKVISIOn is giving me service to use that function without the need to order PRIVATE IP address from my ISP. But now I have doubt. Can you answer that please?

@HikVisionGuru Год назад

Hi Peter! Please could you email across or WhatsApp (HikGuru.yt@gmail.com / 07541 889 864) a screenshot of your Hik-Connect app, specifically, if you can press on the 3 dots next to your device, press settings, then screenshot. Also if you can send me a picture of the platform access screen on your dvr/nvr, which is found under network, advanced, platform access. Thank you

@peterkapusta1630 Год назад

@@HikVisionGuru Thx again for your help. Re-adding the NVR to Hik Connect app once again via QR code and not like local IP address worked well. I am now able to connect. Thx again for your help.

@justa1098 Год назад

Hi. I've just received a new router. Any ide how I change my nvr settings for the new network. It was originally setup by the installer. I don't now how to change it

@HikVisionGuru Год назад

Hi Jay! It should just be automatic, is your NVR connected to your new router using an ethernet cable?

@justa1098 Год назад

@HikVisionGuru thanks for the quick reply. No ethernet just wifi

@HikVisionGuru Год назад

@@justa1098 does it use a powerline adapter at all? Or some form of wifi dongle plugged into the NVR, or is it a wifi enabled NVR? Do you know the product code of your NVR?

@justa1098 Год назад

@HikVisionGuru sorted!! I didn't realise it did connect to the router. Looks like it was plugged into the wrong socket on the router. It's working now but as I said thankyou for replying. Very much appreciated

@24nikita 2 года назад

I`m having problems understanding at 9:00 how your camera is on line. There is nowhere in this video where you changed the camera`s name from "IPCamera 01" to "Camera 01". My camera remains "inactive" having followed your video many times.

@HikVisionGuru 2 года назад

Good morning Nikita, just to make sure, your system is definitely an IP based system as opposed to analogue correct? Are your IP cameras plugged directly into your NVR or are they connected to a switch on the network? Is your NVR set to plug and play or manual editing of the ip camera addresses? If they are plug and play they are automatically detected by the NVR and once connected show as camera 01.

@jarraheissa 2 года назад

can I enable H.265+ 10:44 ? you did not talked about it? since my camera and NVR support it

@HikVisionGuru 2 года назад

Hi Jarrah! We don’t normally recommend h265+ as we find it to be rather unstable as many other people have reported. Sometimes you’ll have a laggy playback or the live view will stagger. H264 is the most stable, however uses much more storage space, only use H265 if storage space is an issue as it will massively improve

@just_A7medd Год назад

Can someone tell me whats the program used to connect the nvr

@HikVisionGuru Год назад

Hi Ahmed, which program are you referring to? There is SADP Tool which allows you to activate devices, view ip addresses etc? Or there is ivms4200 pc software for live view playback and configuration, or just internet explorer using the web interface?

@jordangilbert216 2 года назад

Thanks a lot for your videos. Makes my job a lot easier😁

@HikVisionGuru 2 года назад

Entered! Thanks for the kind words Jordan!

@jarraheissa 2 года назад

Hello sir, I'm confused about the NVR I will purchase, can you help me? I already pre-ordered this AcuSense DS-7716NXI - is it ok? I'm looking for something high-end that's why I picked this NVR, do you recommend something or suggest? Thanks

@HikVisionGuru 2 года назад

Good morning Jarrah, how many cameras and what resolution cameras are you intending on using? That NVR is good, is it the iDS- model or just the DS-?

@jarraheissa 2 года назад

@@HikVisionGuru I'm getting the 16 slots, but I will be using 4 or 5 , but I'm whiling for 16 so maybe I add more in the future, and it will be probably 1920x1080 with 8MP still a good resolution yes? Not sure if more MP will be better visibility for long time use, I used 2MP before and after a year it became blurry. And which is better ids or ds? I googled it but couldn't understand my needs

@anesuezra3196 2 года назад

Hi Guru. How do I connect a switch to the NVR and have all the cameras(6) connected to the switch display individually and independently. I have one cable running to the switch at the cottage from the main house. But when the footage comes, either one camera comes up or they interchange on one window.

@HikVisionGuru 2 года назад

Hello! Is your system IP or analogue? If IP, are the cameras plugged directly into your NVR, or do they all go into a network switch?

@douglasgrantham6168 2 года назад

My NVR does not overwrite so the disc fills up quickly especially with 9 cameras can you help

@HikVisionGuru 2 года назад

Hi Douglas, if you go into storage settings/management you will see an option for “overwrite hdd”, make sure this is ticked. Are you running the same firmware as the one in this video? If so I’ll be able to guide you to the menu in question

@topbeav7201 2 года назад

Comment for giveaway, I’d use the camera to fit at my ma’s house she needs one at her door. Also love your content been a supporter since day 1. Love

@HikVisionGuru 2 года назад

Entered! Thanks for the kind words Top!

@rayben5174 2 года назад

dvr system is it the same? i cant connect to the internet how can i fix this problem plz?

@HikVisionGuru 2 года назад

Hi Ray! Yes dvr/nvr, mostly the same configuration. Is your dvr connected to your internet router using an ethernet cable or? I would suggest watching this video of ours here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8LiiVAV4K40.html

@rayben5174 2 года назад

@@HikVisionGuru yes directly to my internet router using an ethernet cable , still not find the solution to fix the problem unfortunately 😞

@HikVisionGuru 2 года назад

@@rayben5174 if you could just compare the settings on the screen of this video at this time (click link to our video here), ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-8LiiVAV4K40.htmlm14s Under network, basic settings/tcp ip, ensure that dhcp is enabled (ticked), make sure that enable obtain dns servers is ticked. Hit apply after doing so. Then from the left menu hit advanced, followed by platform access on the top, make sure Hik-Connect enabled is ticked, hit apply and the status should say online. Get back to me with what your dhcp was set to and if the dns was ticked. This is usually the issue

@beverleyshaw136 Год назад

Need some help how to set up pattern the installers say they cannot help me

@belajar5menit822 Год назад

How do I add the Hik Connect camera to a different network on NVR..thx

@HikVisionGuru Год назад

Hi! What exactly do you mean by different network? You should be able to add any ip camera to the NVR, unless you mean they are at 2 different premises

@belajar5menit822 Год назад

@@HikVisionGuru I mean using wireless not at same Ip segment ...different place, as function ddns..can hik connect do that, bounding to Nvr..Simply is join hik connect between cctv to Hik connect nvr

@chistophermarmeto1434 Год назад

You have idea how to connect ananlog camera to NVR

@HikVisionGuru Год назад

You can connect analogue cameras to a DVR, not NVR. Does this help?

@technicalshare6602 2 года назад

Nice 👍 video 😊

@amratgohil3763 2 года назад

I have three cameras but only shows two on TV

@HikVisionGuru 2 года назад

What shows in the 3rd and 4th grid on the screen? Does it show “no link” or “no resource” or “HikVision” or?

@kk97826 Год назад

Thanks . This movie help me a lot. The only problem I have is on app ( iphone 12pro) it opens a camera on basic not on hd . When try to switch to hd 3/4 of picture is green and 1/4 of it perfect clear hd visuality. I have tried to close eye one 3 cameras and left one but It doesn’t work anyway. Any advice?? Appreciate your help

@HikVisionGuru Год назад

Hi Konrad, I’d suggest updating all of your cameras (if IP) and your dvr/nvr firmware. Are you running the recording on H264/+ or H265/+? What bitrate are the cameras set to? If you’re unsure where to find these let me know

@kk97826 Год назад

Resolution on camera - 8mp. I have tried 16384 Kbps. On NVR cameras perfect clear but on app only problem exist when try to switch to hd

@HikVisionGuru Год назад

It is quite a high bitrate especially for x4 8mp cameras. Is it a 4 or 8ch NVR? I’ve seen disabling stream encryption on platform access increases the stream loading but then you’ve got security vulnerabilities.

@kk97826 Год назад

On your movie hd on app came straight away with no problem. That telling me probably somewhere on settings might be problem. I have setup everything on 4k settings in my NVR. Any way thanks for speedy response.

@kk97826 Год назад

4 ch

@loayalbabaful 2 года назад

very nice

@othamsetty Год назад

I got NVR to setup for my existing Uniview cams . I plugged in power card and internet cable to NVR . Instruction says open a browser to activate NVR device but it doesn’t provided the URL to browse and activate it. Could you please provide it.

@HikVisionGuru Год назад

Is it a HikVision NVR?

@othamsetty Год назад

Yes

@HikVisionGuru Год назад

I would recommend either plugging in a screen or monitor into your NVR and activate using a mouse. If you don’t have one, then using your computer I would download “HikVision sadp tool” and from there you can activate your NVR.

@othamsetty Год назад

Once we plug-in minor to NVR then does it show instructions to activate ? Does it show the URL to activate ? Do we need to find out IP address of NVr ?

@HikVisionGuru Год назад

@@othamsetty yes upon first boot up it will give you the activation process of settings username and password amongst all of the other settings, this is the setup wizard. You don’t really need to know the NVR ip address at this stage

@Cimone90 Год назад

Why do all my cameras stay at exception. They never work

@HikVisionGuru Год назад

Hi Peter, are your cameras plugged directly into your NVR?

@Cimone90 Год назад

@Hik Guru yes they are. I originally tried to activate everything through the app using the qr code scanner before doing this setup on the nvr itself. No matter what I did the cameras would not work even after doing the setup directly on the nvr. Then i swapped the cameras for different ones and they worked fine. It seems that whatever I did on the app has made the cameras I originally used unable to activate on the nvr now.

@mattcalvert5197 8 месяцев назад

when viewing playback it only shows all the footage as 24/7 record , I cant see when motion was triggered within the 24/7 footage ?

@HikVisionGuru 8 месяцев назад

Which DVR/NVR have you got? The new NXI version shows continuous and motion at the same time. Or, if you set the recording to motion only and not 24/7 on the recording settings, it will show just the red motion markers. Depends if you want solely motion recording or continuous too

@mattcalvert5197 8 месяцев назад

@@HikVisionGuru thanks for your reply , I have DS-7608NI-K2/8p nvr , I want it to record 24/7 so nothing is missed as sometimes with motion only some things can get missed , but when viewing playback I only see a blue line with no motion triggers highlighted even tho I have intruder detection enabled this is when viewing in the web interface or the nvr it’s self .

@mattcalvert5197 8 месяцев назад

I have version number V4.72.107, build 220914

@HikVisionGuru 8 месяцев назад

You’ll need the NXI NVR rather than the NI You can of course have the motion alerts go to hikconnect where you’ll be able to scroll through the list of detections?

@mattcalvert5197 8 месяцев назад

@@HikVisionGuru ah right so my nvr isn’t capable of doing this with the new firmware , it used to do it with the old red and black firmware? It is currently sending me the intruder alerts to the Hik-Connect app tho , is there no way for me to also see the motion detections within the 24/h playback line ?

@mickerton2551 3 года назад

Hi, I sent you an email hoping you would look over and comment upon my planned install. I'm impressed by your obvious skills, and would like to avoid silly mistakes.My reason for commenting here is to reassure you that I'm genuine. Regards. Michael

@peppi7777 2 года назад

Hello I am trying to understand what is hik-connect? Do I have to enable it? Is it a free service using it or its a payment plan? First time buyer and set up with my new NVR and ptz Poe 4k camera. Much appreciated. I can't seem to find any info beside everyone showing how to set it up. I looking to know what it is and does it involve 3rd party charges. Thank you.

@HikVisionGuru 2 года назад

Hik-Connect is a free of charge HikVision app, which allows you to live view playback receive notification of your HikVision device. No payment plans, all free.

@peppi7777 2 года назад

@@HikVisionGuru thank you for the reply. Much appreciated. Now I can set up my hik-vision NVR with clearity and no " what did I do". Have a great day. And great video contents my friend!!!

@hinarauf9255 7 месяцев назад

I dnt have platform access tab, where would my qr code be so i can connect it to my phone plz help

@HikVisionGuru 7 месяцев назад

On the configuration menu it should say “expert mode” in the bottom left corner, click it, then go to network, advanced, platform access. If you’re still unable to see it, look under your dvr/NVR there will be a label with the serial number written on it, then on hikconnect click on the + button in top right corner, followed by manual adding, then type in this serial number

@hinarauf9255 7 месяцев назад

@@HikVisionGuru omg thank you for replying! I found it. My new problem is that it keeps showing device offline on my phone (hik app) but my internet connection is fine, i cant work out the problem, can you help please?

@HikVisionGuru 7 месяцев назад

@@hinarauf9255have you got a screen plugged into your device? If so using the mouse go to configuration, network, basic settings, and send me a screenshot of that screen to hikguru.yt@gmail.com and I’ll see if everything is set correftly

@hinarauf9255 7 месяцев назад

@@HikVisionGuru Thank you so much. I will do that now! X

@jakobporterz3211 2 года назад

Do you know what IP address imputing manual entry. In the Hik-connect app? Ip/Domain. I have port forwarding in to my router. It works only in Wi-Fi, but does not work when I’m on cellular. Any suggestions?

@HikVisionGuru 2 года назад

Hi Jakob, you will need to use your routers external IP address and not the internal. You can find your external ip by typing into Google “see my IP”

@jakobporterz3211 2 года назад

@@HikVisionGuru do I take my external IP address and input it on manual up/domain? With port forwarding into my router using the IP address from the external address?

@HikVisionGuru 2 года назад

@@jakobporterz3211 you would input the external address into Hik-Connect ip, you’d need to port forward the address of your NVR, the local ipv4 address.

@priyankapatel4586 5 месяцев назад

how to get the NVR screen ? please assist

@HikVisionGuru 5 месяцев назад

Not 100% sure what screen you mean? Have you plugged a screen into your NVR via hdmi or vga cable?

@wxbcyqr Год назад

What can do if forgot admin password?

@HikVisionGuru Год назад

A password reset will be required, we’ve got a video on this. You may need to contact HikVision, your installer, or us, to do the reset file for you

@a.g-tk9ks Год назад

Another great video, thank you. Would it be possible for a new NVR setup video with the new system settings? Tvm

@HikVisionGuru Год назад

Thanks! Yes certainly can do! What NVR are you using? 4ch and 8ch nvrs have slightly different interfaces on some versions

@a.g-tk9ks Год назад

Awesome. DS-7608NI-M2/8P is the model I am using. Thanks

@stuartmason1577 Год назад

Hello, following your brilliant video I've managed to set up my NVR and Hikvision cameras. Everything works lovely, great resolution day and night and dead easy to retrieve particular events. The one thing I'm having difficulty with, which I thought would be the easy bit, is viewing the live feed via my smart (LG) TV ! The TV is situated at the opposite side of the house to the NVR so was hoping the feed could be achieved via wifi, which is really strong throughout the house. I've looked at a few options but so far not succeeded in getting the feed to the telly, wondered if you could help out please?

@HikVisionGuru Год назад

Hi Stuart that’s great to hear! Best option if feasible is to either run a hdmi or a cat6 cable across with a couple of hdmi over cat6 converters. If running a cable isn’t an option then I’d just use a wireless hdmi transmitter/receiver. It’s a shame you can’t get the app on smart tv’s yet!

@terryfouldsfishing8081 2 года назад

Top guy would love to win that new camera to add to the rear of my property. This channel help me loads over past few month of getting a hikvision set up allways messages back as well. And through email. Cheers mate.

@HikVisionGuru 2 года назад

Entered! Thanks for the lovely comments!

@jmason5013 6 месяцев назад

great video.....im setting up my 7600 series tommorow so no doubt with have a load of teething problems that this tutorial will guid me through........thanks for taking the time to make this video and upload it

@HikVisionGuru 6 месяцев назад

Appreciate the kind words, drop me a comment if you need help with anything

@jmason5013 6 месяцев назад

@@HikVisionGuru after i get stated tommorow i think we are going to be best friends for a couple of days until its working....lol thanks for the offer.....im sure i will be back for some advice

@maevisdarkhorse 7 месяцев назад

Thanks! By watching this video, I have set my CCTV system up myself, & saved £200 - £300 in instillation fees. 😁

@HikVisionGuru 7 месяцев назад

Brilliant that is what we like to hear!

@Philmilliar Год назад

Great video! Question - My NVR is upstairs in a closet in a space that is occupied by tenants. I access the cameras using the Hik-Connect app on my phone or tablet. Id like to set up a separate standalone LCD monitor in the basement using the Hik-Connect app to have the cameras displayed all the time. Is this possible without running any additional wiring down to the basement?

@HikVisionGuru Год назад

Hi Phil! Options are, use a computer and watch the cameras via that, or, use a wireless HDMI transmitter/receiver, depending on how many floors it is the signal should reach, although these are fairly expensive.

@Philmilliar Год назад

Hi Guru, thank you for the prompt reply! Its only 1 floor so, it should reach. I was under the impression to use one of these extenders that I would need to run CAT5 cabling to reach the receiver. Everything in the basement is wireless connection via WiFi. Is that accurate that a hardwired internet connection is needed?

@skuzy 2 года назад

after setting up. did you need a dedicated computer or monitor for this? comparing against a EUFY where you dont need any PC for the set up

@HikVisionGuru 2 года назад

Hi Joe, you don’t need a dedicated pc or monitor although you will need something just for the initial setup. You can use either a tv/monitor or a computer.

@shiotevzadze 2 года назад

can u change user permissions?

@HikVisionGuru 2 года назад

Hello! Yes you certainly can, you can do this under user management, adding users, and setting permissions.

@ravipanchal6575 2 года назад

Hi, Just watched your Appreciation Giveaway video. I’d like to enter as you’ve helped me many times and it is always greatly appreciated. Good luck to everyone that enters 🙂

@HikVisionGuru 2 года назад

Entered! Thanks for the kind words Ravi!

@sajakhtar4941 2 года назад

Hi Guru, I’ve installed 4x camera to my Hikvision NVR. When I view live mode, I notice some of the cameras go fuzzy and are unstable and when I select a particular camera to view, the image is stable. Please advice. Thanks

@HikVisionGuru 2 года назад

Good morning Saj! Is this on a local screen or on Hik-Connect live view?

@sajakhtar4941 2 года назад

It’s on Hik- connect live view from iPhone

@HikVisionGuru 2 года назад

@@sajakhtar4941 if you load one of the cameras, then in the bottom left corner can you see it says “basic” or “hd”, tap on that, and make sure “hd” is selected. This will make sure the camera is in main stream mode, the basic mode is sub stream which is lower quality however May load quicker.