Hobao Hyper 7 TQ2 28 How to break in the Nitro engine 

It's essential part of my sponsorship to provide these tutorials on the buggies sent for review :) I've done tonnes of other tutorials mate

This is a awesome tutorial in exactly not what to do to break in a nitro engine.

hi i am currently doing my break kin for this car but when i leave it for a couple of minutes it suddenly revs really high and then stall

Quick question I have a hyper 7 I was looking it up to see how the engine sounds because I don’t have no fuel I noticed all the ones I’m seeing are mach one engine mine has a Orion??

what kind of glow plug shuld i use for best performance for my virus 2.0 bigblock in summer and what kind of glow plug should i use for it in the winter for easy starting and performance?

shut the engine off just before the fuel runs out, never let the engine run dry, NEVER... once you have shut the engine off, be sure to put the piston at BDC (bottom of the engine), this allows for contraction of the sleeve properly, and prolongs engine life.. this is a good practice to do everytime you shut the engine off through out its whole life.. Hope this helped

Thanks mate. more coming

Yeah I got the acme barbarian nxl pro version from nitrotek I think the pullstart was not assembled correctly in the factory as it broke on second tank break in I was only pulling it out maybe half way but fast!! I've actualy just ordered an electric starter maybe that will be better??? But my friend says this pull start is an easy fix???

holiday is almost over mate, so I can start sorting out my mailbox!

Hey man my pullstart just broke well the pull cord just came out no snap or break just came out do you have any tips on how to fix them??

haha well the holiday ending won't stop me :D if anything, I get more time when the holidays are over hehe

I thought there was supposed to be a little blue streak of smoke on accel, looks a tad lean.

Hey man I was wondering if you have to use a particular percentage of nitro fuel for different cars. Can I also use 25% nitro for my shockwave nitro RC buggy?

where did you get that glow starter as i want to get one that runs from one of my batterys

25% fuel is recommended for ,21 size engines and higher.. with a medium to cold glow plug.. you can use 25% on smaller engines by adding a shim in the head to slightly lower the compression to allow for the higher bang of higher percent fuel.. Hope this helped

FTX carnage NT #VS# HPI bullet ST 3.0 wich is better ??

Did the video miss out the second tank?

hey i have a hpi firestorm and the idle screw has come out and when i try to screw it back in it just comes out again what should i do???

so how have you connected it to your battery's

Hi buddy. I bought this hyper ss and came with the easy pull started which is a piece of junk. I was breaking it in and the pull didn't wind back so I took it out to fix it but I noticed it wouldn't work again it is bad design. anyway what you recommend to replaced with. I been having a hard time to find something here in the usa. will you help me to with some leads to buy one please.

Hi what glow plug is used for these engines I saw that there are normal glow and are slightly larger glow .. How is calling?

What do i do if i press full throtal and the car slows down

Is this method suitable for the .21 3 port version?

Thanks :)

HPI bullet st 3.0, Thundertiger tomahawk st or hyper 7??

Would love To know where you got that glow plug igniter from Or how you made it

when you get a rtr rc car does that mean it comes with a glow plug in the motor

could be running too rich.. If you have adjusted the needles, id recommend setting them back to stock and try again,,.

Hello. I bought this car today.I started it but in 3-4 min. the engine started to run by its own so i stoped the engine... What should I do/???????? youn you please reply me ASAP?

very very very good video:)

You like made 100 videos of how to break in a nitro engine and how to tune a engine you should do more how to's.

wondering how long it takes him to strip the piston liner..

Nice vid dude

is it durable? fast?

It's a ProLux easy glow supply. Search online

Where do you get your fuel from

So do I, it's in the "First start tutorial" video

Go for Drill start :) much less hassle

Bellissimo video bravi

My mum :) she is now a pro camera-woman :D

I'd go 20% :) J

Actually 25% would be better.. Bigger brand, Higher performance over 20% and slightly cooler running temps compared to 20% fuel.. And i wouldnt touch tornado fuel, it had a tendancy to rust your engine internals a while back. Optifuel is a good fuel, great oils used, Optifuel race 25% is brilliant, a little smokey so dont follow exhaust smoke when tuning, but its fantastic fuel

nice :D

I'd say HPI Bullet :)

get a pro one they work beautifully and it is because you are pulling way too far on what it needs to be it is just a short burst

your a good kid

Don't you like electric? :D

Replace the pull start :) n stop pulling it too far out.

he does its part of his other video

who always videotapes

You skipped straight from tank 1 to tank 3

No smoke! There's no way that's rich! It should not be able to rev that highly either!

Replace the carb

1000 video

Yes i agree u would never touch the throttle like that on first 2 seconds of running been into rc hobby for 20 years and thats a no no thats why u never take advice from a 16 year old lol.

this guy has lost subs damm. didnt know he lost so many

he has wun just likee

Fuel 25% is to much I think is better with 16%

That a waste

Thanks mate, more coming