HobbyWing GOV Calibration (FreddyCanFly) 

Every time I have issues with my helis..... its FreddyCanFly to the rescue.... cheers Freddy!! 5 Star from me. 👍

Another Awesome and Informative video Freddy! Thanks for sharing your knowledge, passion and expertise with us! 🚁😍👍🚁

The best explanation yet, thank you

Awesome Video. You got me over the finish line. I am using the Platinum 60A V4 and the LCD Professional Program Box (G2). Just in case some of your viewers have the newer LCD Programmer, I want to share some notes. The newer programmer has four buttons also. They are labeled differently and operate a little differently: ITEM, VALUE+, VALUE-, and OK(R/P). The lettering is all blue on the newer programmer. Before calibration, the additional information lacks the line about Max RPM. After the calibration, the line is there. To get to the extra information, you simply cycle through the entire list of options by pressing the ITEM button repeatedly. After the last item, you will see the option to reset to "defaults." Each ITEM after reset to "defaults" is another piece of extra information, including Max RPM. Using the "Heli StoGov" setting, I had run the throttle up to varying speeds, yet the data for Max RPM never did show up. Somehow the ESC knows the Governor is being calibrated by the 15 Second run time at 50%. Again, Freddy, thank you so very much for posting this video. I would never have understood which mode to use or that I needed to calibrate that mode. The documentation provided from Hobbywing simply lacks enough information.

Great video love them very much...They are so good

Great Video - you helped me out so much to get this sorted out ! Thanks !~

Great vid. Just got the platinum v5 for my newly build RAW 580. The manual doesn't mention it at all.

AWESOME! thanks so much for the detailed video! im setting up my goblin 570 with the 120A HW. I understand everything in this vid except on the part of where I set my throttle curve after doing the 15 sec run up. Do u have to set my idle up 1 to 70% or can I use any value in the throttle curve for idle up 1 to get the desired head speed I want. Same with normal.

hi freddy, may i know if we can simply remove all the blades and run the esc cal ? is there any different ?

Hi Freddy are you still satisfied with this ESC? Does it stay cool?

Thanks for the video. I’m building my 1st rc heli with a Futaba, Hobbywing and a Ikon hd. I’ve done every step carefully and noticed the tail rudder servo moves left sending my heli spinning to the right. I immediately cut throttle. What seems to be the issue? Is it in my Futaba settings? My auto level works correctly but my tail rudder is everywhere. Thanks.

It's been a while young man since your last video. Doing very well with the Realflight 9 sim. Got flight orientation down and nose in, flips are no problem either. Still having a little trouble with tail during inverted. Love my Blade 230s V2. Onto the 360 cfx next. Nice video.

Did you ever make the auto rotation bail out vid for this esc we need your help on this👍

Thanks for sharing.

Freddy dumb question which wires go from this esc to reciever orange brown etc or the red white

Hey Freddy, I Wonder if you can help me. I have a 550 that I've just converted to FBL and installed an 80 AMP Hobbywing ESC. I've set the high and low throttle points. I run a Kbar and Spektrum AR6210. I don't have a place to plug the governor lead in. I have the ESC in Store but when I release throttle hold it starts spooling. It does not "respect" the no power until above 40%. I've done the 50% spool-up, disconnected and done. On the restart, in Normal mode, flat line 50% the throttle advances beyond 50 % and the heli will lift off. Any reduction in collective/power results in autorotation. If I click into Idleup 1, currently set at 60% the head speed decays, similar in Idleup 2. I have a video you could see if it would help.

Hi, I'm new to using ESC, can you help? My setup is fbl brain 2(heli gyro) and hobbywing 60a regulator. In step 2 "ESC/Radio throttle Calibration" says "ensure the corresponding throttle amounts to the maximum throttle endpoint and the minimum throttle endpoint on your transmitter are respectively 100% and 0%". In the process of setting up the gyroscope, it was necessary to increase the costs of all channels in the equipment in order to have 0% and 100% in the gyroscope menu, as a result, the costs of my radio are -127 and +127. How do I calibrate the end points of the throttle, through the gyroscope (brain 2), as far as I understand, it sends the throttle channel signal to esc. Or should I take a separate receiver, create a new model in the transmitter where the costs will be -100 +100?

great video. So how many rpms are you actually having at N, 1,2? 108*1000 is 108,000rpm which cant be logically right. if its 10,800 that has to divided by gear ratio to acheive a believable rpm.

I`m thinking about getting back into this, I have not been flying for well over 15 years. I used to fly 60 RC Helicopters, which radio do you recommend to go with the Realflight 9 sim ? --thank you

Thank you Freddy

Great video. Did you ever do a video for the “bail out?”

I just get a free trex450L but have no idea how to make it work, i get the helicopter plus a spektrum DX7 I plug batery on helicopter couple of bips but the reciver show no lights on what i can do??

Hey Freddy, have you tried the new fc6250hx fbl unit from spektrum? I recently built a kraken 700 and logo 700 and im using the 6250hx in both of them. They fly nice but only issue I have is tuning the PID settings. Think one day you'll get one of these units and do a detailed setup and tuning guide like you did with beastx? 🙂

I did the calibration in Gov store mode and couldn't get the throttle to work in Idle up 1 and 2 - why should switching from Normal to idle up 1 or two change anything and completely stops the motor. Normal mode at 65% throttle straight line works fine but at Idle up 1 at 75% straight line or Idle up 2 at 90% straight line motor is dead. The Bavarian Demon 3SX FBL just bypasses the throttle signal - can't figure this one out.

Hi Freddy can i set up the gov without main blades on ? Thanks

Great Freddy, you are really good I always follow you. I need some help. I state that on my helicopter I use egodrift 4525HT/550KV motor - HW 200V4 regulator - VBar vlink. unfortunately I have spool up problems and I can't start the engine regularly 0/600 rpm in 16 seconds then very fast up to 1650 rpm idle1, this is really bad but I wouldn't want to give up the VBar steering. this by setting HW external steering, if I use fixed wing HW 0/400 turns in one second and the helicopter suddenly turns 180 degrees. That's no good!!! Can you help me? Thanks for your attention

thanks :)

So full throttle would be 2000rpm?

I have the same esc, what would cause it to shut power to the motor. I was just hovering and testing out my new heli build, XL Powe 550, and within 1 minute of flying I had to auto rotate. Battery is new and was fully charged.

Freddy, can you do this with the blades off?

Would have been nice to see it fly after the cal.

So weird I just got my v4 platinum and it mentions nothing about this in the manual, What am I missing? I'm pretty sure I understand completely without instructions thanks to you dude. You're the best!

Thanks Fred, I don’t think that you can use 100% because the Gov needs 20% headroom to maintain the proper RPM

🇮🇩👍🏻Great

Do yourself a favor a ditch the spektrum and go vbar and vcontrol. Is that tron 5.5? If it is get rid of that before people rip you a new one

1st Like. lol 👍

Never seen such a complicated ESC to calibrate ... 2 days and still can't get enough RPM to the head, thrown this piece of crap to garbage and using my old ESC.

I do not understand the raving about this video, and many others. For a user who would like to know 'how do I set up xxx rpm on my Hobbywing ESC governor' this is useless. Not one video shows it. I will not buy Hobbywing.