Homemade Pontoon Boat Diy Project ( Splav kućne izrade ) 

Hvala druže puno 😊 Živio.

I am glad to hear that. Good luck in the project, let me know when you finish it 😊

The new pontoon is under construction and I'm recording everything as with this model, and my youtube channel is young, I hope to get more subscribers and vipe likes on video clips soon 😁 thank you very much

Thank you. I'm glad I inspired you. If you need any advice, feel free to ask. I will be happy to answer any questions you may have. ✌️

Hvala pogledajte i drugi,prošlogodišnji projekat na mom kanalu.

It is great for fishing. 😊 Thanks Cristina 😁

Thanks😊

Thanks bro. I'm really glad I inspired you, all you have to do is start making it and in a month it's in the water, believe me 😊 If you have any more questions feel free to contact me, I'd love to see your pontoon boat at the end when you make it. All the best Mair Kifić

Thanks man 😊 good luck

Thank you very much. Iron will last longer although it is harder to work with. I wish you good luck in the project 😊

Thanks man :)

@@KeeflaDiy ❤️❤️❤️

Thanks Nikolay 😊

Yes family, friends, neighbors paticipated. Thank you so much man 😊 Its not that heavy. 6 people lift him off the ground 😁

Thank you 😊✌️

Good luck man. If you have some questions be free to text me.

Thanks man 👍😊

Muito obrigado :)

Thanks man. All the best 😊

It is important to start. The rest somehow goes by itself trust me 😁

Thanks a lot. It was worth the effort 🙂

You're welcome 😊

Thank you very much 😊

@@KeeflaDiy What is it's size? I am considering making one, but without roof and on plastic barrels.

@@catalinstroita9734 dimensions is 550x300 cm

You're welcome man. If you have any questions Be free to ask me whatever you want. Good luck in building your own boat 😊

@@KeeflaDiy A question brooo. How much weight can 10 barrels float in water?

@@monibchangma3082 10 and more people without problem.

Thanks man 😊 I will. Have some new projects in my head. Soon I will make one bigger boat just need some materials to come 😁

Once a year it needs to be refreshed, repainted here as well. And it can be made of aluminum but it is much much more expensive.

Thanks mate ✌️

@@KeeflaDiy I'm going to build 1 one pontoon with steel frame, same as your but no 2nd floor and with plastic barrels due to for fishing at sea, will inform you once completed. Nice day man.

@@tinygiant9514 Good luck mate, if you have any questions feel free to contact me.

Thank you very much 😊

Thanks

Thanks 😊

Thanks man 😊 ✌️

@@KeeflaDiy welcome😉👍✌ maybe you must + safefy buoys standy..

Hi Thank you. The boat is in the water all season. In the winter I pull it ashore because the lake freezes.

Metal barrels are better joined by welding and I made a spike at the front. So that the raft sails better. I used plastic for a raft that is fixed to the lake and not intended for sailing. I normally work with metal so I opted for it. If by any chance one is damaged it is easy for me to replace. You can see the factory pontoons are always metal (aluminum or galvanized iron) because of the pointed part forward. I believe that plastic is better, but we do not have a company that deals with welding plastic nearby, and I have no experience myself.

@@KeeflaDiy I found plastic welding very easy after finally getting a good welder. But, there is nothing wrong with using metal barrels. We have metal barrels with 20mil poly liners which have lasted 3-5 years in salt water. As they are free and poly barrels are $40US each, I would use steel in fresh water every time.

Thank you :)

I honestly had no idea 🤣 My plan was to add another one between these two pontoons if it didn't stand stable on the water with two of them. However when I plunged it into the water everything turned out great and there was no need for a third pontoon.

@@KeeflaDiy Glad it worked out so well

Who is chud327 😁

@@KeeflaDiy he's on RU-vid. He is the first homeade pontoon build I've seen . Your buil was really nice..

@@jasonrussell7085 Thanks, I made New bigger one this year, just making a Video and I will upload it soon.

Thanks I use yamaha 4 hp. It goes maybe 10-15 miles per hour. I once put Johnson 20 hp, it went too fast 🤣

@Joe smith My budget wasn't that big, now I'm making a new one, so I thought about such seats.

Thanks 😊

Cinkovali

@@aleksandarkrcmar9996 pozdrav Alexandre. Cijevi su razne, najviše sam koristio profil 4x3 debljina stjenke 2mm. Nisam cinkovao ništa sve je samo ofarbano.

And if seal welded did u put air pressure to it?

The barrels are new so I didn’t fill them with anything. I saw that people usually fill with styrofoam or pur foam, I just welded them to each other and tightened the plugs well.

Yes the most of tubes are 2 mm 4 round vertical tubes are 3mm.

Thanks man 😊 It's 300x550 cm surface. 250cm height without pontoons. Pontoons are 60cm

One more question bro, is that water salty or? I was thinking how long those pontoons gonna last if you’re cruising on salt water!!!

@@Kionambali7 no it's not salty 😊 I think pontoons should be plasticized or galvanized to last longer in salt water.

Hvala. 😊 Tada kada Sam ga pravio kostao me sav material I tudje usluge oko 1800 KM. Sada sa ovim cijenama bi kostao preko 2500 jer je material poskupio nenormalno, zeljezo duplo skuplje nego prosle godine. Upravo pravim novi, malo veci, potrosio Sam vec oko 2000 a nisam ni blizu 😁 imam samo hrpu zeljeza I burad.

@@KeeflaDiy hvala na odg. tako sam nekako i mislio. Bio bih ti zahvalan kad bi mogao dobiti par savjeta i uputa jer planiram sebi ovako napraviti, ali bas ovakav kao tvoj jer je brutalno dobro . Sretno u daljem radu.

@@adisadis7845 Sve sto te zanima slobodno pitaj potrudit cu se da odgovorim sto detaljnije. Proces izrade imas u videu a za ostale info pisi na mail mairkific3004gmail.com

Hvala druže. Na vodi je savršen. Plovan je nevjerovatno dobro mozda i bolje od standardnih čamaca jer mala je površina koja dodiruje vodu. Vozim ga sa yamahom 3.5 ks. Deset osoba ne osjeti tako je idealno moze i 15-20 ali onda bi se malo trebali rasporediti po cijelom splavu da se nebi puno naginjao ako su svi na jednoj strani.

@@KeeflaDiy Bravo 😀Ja sam u planu da izradim isto takav,dugo sam googlao i trazio ideje i projekte.Ali kad sam video ovaj tvoj odusevio sam se,sve je palo drugo u vodu,samo o tome razmisljam.Nabavio sam burice,sutra idem u kupovinu cevi i nastavljam dalje.Reci mi samo koke si cevi koristio,5*3 mi se cini da su?

@@markomikov3872 da vecinom su 5x3, ima i dosta 4x3 ,ograde su 3x2 a ova 4 stuba za sprat su okrugle fi70 cini mi se .

@@KeeflaDiy Druze,a koke su dimenzije same platforme,bez burica i one zadnje strane gde se kaci motor?

@@markomikov3872 200x400 je sirina i duzina bez ova dva prolaza sa strana i bez zadnjeg dijela za motor.

Hi. I’m not sure I understand because my translator translates my words literally. The joints between the barrels are open so that water can pass between and when the boat is taken out of the water all the water comes out. And if you think in case the water enters the barrels, the barrels can be easily replaced although in water that is not salty barrels last for 10 years before they leak water.

Hi. The barrels are empty inside, people often fill them with styrofoam or pur foam, I had no need because the barrels are new and the water is not salty and I know from the experience of other builders that it will take about 10 years before it leaks. In the coming years, I definitely planned to make real pontoons from 3mm thick sheet metal and replace the barrels to make them look nicer and of better quality.

@@KeeflaDiy I think you did an awesome job , going to take on a similar project . We have a big dam here in South Africa, The Vaaldam. Wil share details as I go on .

@@nicokroucamp7068 thanks, good luck in project 😊

Hvala drug. Dimenzije su 550x300cm

Hvala

Maybe 300-400 kg (construction) 10 barrels.

Yes, samsung need to send me some new phone 🤣

Square tubes 3x4cm and 4x5cm the most.

2mm thick steel

@@KeeflaDiy thanks

100% i ja kažem var stroj je stroj kume moj 😂

I had no need because our law is not regulated enough yet. And the certificate can be done as with choppers, boats and home-made trailers. We have previously registered home-made boats.

Home made, I mean Hand made my english is not great 😂

Bosnia and Herzegovina Thx

@@KeeflaDiy Go Bosnia! Beautiful job, guys!

@@stelviodelbrava6218 Thank you so much :)

300 cm

First I made a shape out of paper, then I drew it on sheet metal. Metal sheet 3mm and welding machine.

@@KeeflaDiy awesome thank you so much

That boat is awesome btw I cant wait to make one for myself. Thanks for the inspiration

Good luck in project 😊 Send some photos when you finish your boat.

🤣🤣 It's OK thx

80% of construction is 4x3 cm

2mm thick steel

550x300 cm Promjenio sam nekoliko penti. Najduže sam koristio yamahu 4ks dva takta. Jezero je mirno tako da nije bilo potrebe za jačim. Splav sam PRODAO U Banja Luku na jezero bočac trenutni vlasnik je kupio pentu 20 KS.

@@KeeflaDiy iskreno jedan od lepših na youtube

@@ckiljin hvala puno 😁 tesko mi je bilo odvojiti se od njega ali hajde nek još neko uziva. U izradi je novi malo veći. Bit će snimak do ljeta.

@@KeeflaDiy reci mi mi jesi li koristio tanki zid cevi?

@@ckiljin uzimao sam u 2 firme jedne su bile 1.8 mm druge 2 mm a ova 4 stuba su okrugle fi 8cm 3mm Stjenka