Homemade Trailer Part 3 | Outer Frame, Stake Pockets and Rub Rails DONE! 

Just an FYI, I have no clue why it has put that blur in the video. I used youtube's editor to blur my address at the end of the video but for whatever reason it has put a blur all throughout the video. 🤷‍♂I'll try to fix it but not sure that I can.

I love both channels and look forward to all the videos you post. I always know what I’m doing on a Wednesday evening. All this to say don’t get discouraged Chad. And if the second channel isn’t worth it, those loyal subscribers should understand. It’s not being greedy.

I'M PROUD TO SAY I'M A SUBSCRIBER TO BOTH CHANNELS, CHAD HOPE YOU GIVE YOUR SECOND CHANNEL A LITTLE MORE TIME TO GROW, BUT THAT IS OF COURSE UP TO YOU

I Watch both channels anytime and I even go back and rewatch some of the old videos because they are enjoyable

Chad,thanks for letting your subscribers know about your second channel.I just subscribed. Let's get busy!🫡

I'm an older guy but I love both your channels,I look forward to your videos. Thank you

I look forward to Wednesdays because you post your videos then when everybody else does there’s at the end of the week or on Saturday 😁😁👍👍

Love the trailer, I do like the time lapse. Think it would be cool to have your banjo music on the time lapse, great art!!!👍😎

Hello Chad. When you mentioned the galvanized metal welding, I immediately knew what you were referring to about the illness associated with inhalation of the zinc oxide fumes. And like you also alluded to, I get the craving for dairy products even though I haven’t touched a welder of any kind for around 4 years now. Where I worked out of with the highway department, I was asked to weld a wide range of different galvanized steel products because the traffic division was next door to our equipment building. I have repaired just about everything with galvanized steel coating that you see along your multi lane federally funded highways and interstate highways. Back in the days before our traffic division contracted most of the galvanized traffic stuff out,,The luminary poles had 2 large diameter U-Bolts within the concrete pad that was like 4 bolts sticking upwards. I used to re-weld bolts to replace the broken off pieces of the U-Bolts with bolts that I had cut the hex heads off of. The traffic technicians would provide me with a listing of the different locations that needed the bolts welded back onto the studs sticking up through the concrete pad and I traveled within our 12 county district fixing those things. Oh, The stories that I could tell about the galvanized steel.

I enjoy the time lapses and you do them very effectively. It reminds of Popeye after he eats his spinach! Great video and keep 'em coming.

All that hard work is finally coming together congratulations

Here’s hoping more viewers subscribe to your second channel as well…I truly enjoy both and appreciate your efforts and dedication.

yes, time lapse is great. but we also like hearing you explain things your doing and your little goofs lol. great channel

love the time lapses, and the ingenuity!!

I've watched your other channel from the beginning, and I very much enjoy both of them.

Man that’s going to be some kinda trailer when done. Can’t wait to see the finished product.

This reminds me of my years in the fab shop. My old friend Mac used to say “don’t weld in the morning what you can’t torch apart in afternoon” No truer words were ever spoken. Mistakes will be made. You have done this before.

I enjoy both channels and I totally understand if you let the other go for now if it’s not working for you. As far as the negative Nancy’s go, I’ll tell you like some old timers told me when I was younger. “Don’t sweat the petty stuff and don’t pet the sweaty stuff!” Keep up the great videos brother.

Time lapse is better than the time travel method. We still get to see the work getting done. I do agree with that other guy that your banjo music would be great

Chad I think you are doing great especially when you make a happy boo boo and explain how to fix them ! Because we are all human and make mistakes so we need to know how to fix them ! So Thanks !!! GOD BLESS !!!

To answer your question if we (well, I) enjoy you using time lapse.. honestly I think you do a great job knowing when to start and run a time lapse after you go through what you're going to set out to do, show us a little of what it is, then wash rinse and repeat on the time lapse. It sure is neat to see a couple / few hours work go by in a couple minutes. I think it's awesome!

When there is nothing new on to watch I always rewatch your big farm truck videos.

If someone can present me with a channel I'm interested in and present its content in a way i really enjoy, they can be as greedy as they like, providing they don't try to BS me about it. I watch and enjoy both channels! Best wishes Chad.

This n That Garage and Jennings Motor sports are 2 best on youtube iwill always watch thumbs up :)

Yes, we like that time lapse. Especially if you have already showed us how.

Great vid as always sir, and I love your second channel too. If it's not making you enough money, I get it. You gots to get paid! These projects don't pay for themselves, and groceries don't make it into the fridge for free. You do what's right for you, and I'll keep enjoying whatever you choose to share with us. thumbs up

Man your welding your ass of, some people don't know thats a job! Good job 👏brother.

Breathing the smoke brother, bad stuff! I’ve always heard that about milk! WORKS

You gonna have to cummins swap the w300 so you can pull that new super nice trailer. Great work as always!!

Need a couple of roof turbines on the roof my friend to pull the smoke out! Saves your cooling, those turbines are meant to pull the heat out and they’ll draw the smoke out too!

I have heat and AC in my small shop and hated having to open the big doors to vent. So I got a couple of these AC Infinity CLOUDLINE A4, Quiet 4” Inline Duct Fan with Speed Controller and hooked those up with some 4" diameter Ultra Flex Clear Vue heavy duty PVC hose to dryer vents with return flaps so they are closed when not in uses. Then I just position more hose to the intake side and have the open end of the hose by were I'm doing what ever is creating the smoke or dust. Doing that keeps the air pretty clean but doesn't remove to much heat or AC.

Yeah, we like time lapse. 😊

Excellent video Chad didn't realize how much work it takes to build a trailer we enjoyed every minute Larry and Sandy

Also some nozzle dip for the mig keeps the nozzle from clogging up with buckshot! It keeps the buckshot from accumulating in the nozzle and you won’t have to beat on the nozzle! lol 🤣😂🤣

Always enjoy the channel.and also always watch the second channel.

Yep I like the time lapse

Hey hey y'all! Runnin' a little late to the party but, hey, at least I'm here! Pray that everyone is doing well and staying safe and hydrated in this heat that's pretty much everywhere right now. Remember to squish that "like" button and share this video to your social media accounts to help Mr Chad to keep bringing us this awesome content that we meet here each week to enjoy! Til next week, much love and God bless! ~ Scott 💙🙏🏼 I love the second channel so y'all get over there and support this man who gives so much of himself to keep us entertained! It's a small fee and heck.... you ain't even gotta watch it! Just to let it play in the background! And 💯 yes on supporting local small businesses! 💙👊🏼

Great job on trailer looks real professional

The trailer is looking as pretty as a Norman Rockwell painting!

it is cool thanks you Dylan

Man Ifeel for you dude,we'd go great as buddys this is how my projects usually ends up ,measured 5 times and still screw it up😊😊

Excellent video Chad :) also take time fill up 2 channels I heard and little time too! Like how trailer turned and yes wicked wood price are too also my oldest brother told me like! Also glad Air Conditioning works better now for you Chad and help much more!

Please keep the second channel. I like the content because it’s different stuff

That trailer is looking great. When you do good work, I hope those tires don't rub. But I'm sure you have thought of that.😅

good job keep up the work

I like the second channel , it was cool seeing the mini spilt put in ,

I only seen one ad during this video. See you on the next one. 😎🤣😀🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸😀🤣😎

I thoroughly enjoy watching this country boy with his backyard butchery doing his thing in every video! Chad, you make this ole country boy from Connecticut have a happy smile on my face and a chuckle now and then! Don't stop whatever you do as it seems natural to most of us.

Mr Chad, I'm on both channels, but you do what you need to do, I'll watch it, that you can guarantee, nice job on the trailer sir, really impressed with that, keep up the great work my friend. 🇬🇧

I am subscribed to both of your channels Chad and I watch every single one of your videos religiously. Just letting you know, keep up the good work!

Hi Mr. Chad, I'm subscribed to both of your channels, we took a hit from Hurricane Beryl, our internet has been down since the 7th just came back yesterday, so please hang in there keep doing what you do best, i truly enjoy your content.

I like when you time lapse the repetitive stuff, as long as we don't miss out on some MLS comedy or chinesium laughs.

She’s lookin really good. Be dragging junk home before you know it!

That is going to be one heavy trailer to pull and stop. Can’t wait to see you pull it.

The only thing I know is you need to 3/32 cutoff blade and not a 1/8 blade, I’ve noticed with my cutoff saw it takes a lot longer to cut through material with a 1/8 blade! The 3/32 cuts through a lot better! Only opinion I have brother! I don’t waste anything, I take the old cutoff blades and put the center hole adapter on my angle grinder and use the rest of the blade as a cutoff blade on the hand grinder! Works well too! Saves on cutoff wheels for my angle grinder! 👌🏻👍🏻👍🏻 But when you put them on the hand grinder, they’re almost 6”! 🤷🏼😁

Trailer looks great! I'm subscribed to and watch both channels

Great video as usual! I love your backwoods approach to complex projects. Keep digging, and let the negatives roll off your back. I'm one of your 8000 subscribers on the second channel and I hope the content continues. Keep up the great work brother!

Yeah the time lapse is cool. Shows alot of progress.

Yes time lapse is great. Worry about those fumes you are inhaling. Need to becareful. Great video

I like timelapse scenes, so artistic, you have talent to edit those.

I like the time lapse, and I watch both channels. There is a lot of interesting variety on the 2nd channel. But you have to do what works for you. I wish you great success!

I like the time lapse when the work is redundant

Looks great Chad, thanks for sharing my friend! Kirk from Louisiana sending prayers and positive vibes for you and your family! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼✌🏻✌🏻💯💯💯

I enjoy both channels Chad, I like the odds and ends videos just as much as anything else!👌🏻👍🏻👍🏻

The trailer is a thing of rare beauty

I like the time-lapse and watch both channels trailer is looking fantastic

I’m subscribed to both and watch typically as soon as it’s released

Gonna be a good hauling trailer. I've watched extry since it started. Love both channels. I like the fast forwards on repetitive things. Hope you get more subs on extry so you can keep it going.

Yes I'd like to time lamps I watch your videos all the time ❤

I'm a loyal follower on both channels. I enjoy content on both of them.

That trailer is looking fantastic. Keep up the great work.

Hi Chad, 30 years ago over here in the UK I worked in a shop where we did plenty of galvanised steel welding and the management supplied fresh milk, many times felt rough from the fumes. Take care mate and great channels, keep it coming 👍

The trailer is really taking shape , you have a whole lot invested and I'm sure that it will pay for itself in the near future . Keep on with the project , I love the things you do , I'm a This N That fan for sure . Stuart in Canada ..

man i like the 2cd channel as good as the primary

I like both of your channels. And are a subscriber to both of them and I buy things like your hats. Love it all.

I love all your videos and watch them all keep up the great work

Time-lapse would be good! 👌👍! Keep it up! Great content! Thanks for sharing!

I just joined the second channel last week, but that was because i didn't realize it existed.

I really enjoy all your content. I actually learn stuff. Also, I have noticed your channel keeps growing. Congrats.

Worn out welding gloves only shows that your work hard

I’ve been doing some dirt dobber welding Chad, on a tire rim that was rusted on a bead seal area! Got it welded and ground to a smooth seal edge now and waiting for my paint to dry so I can put a new tire on tomorrow! I know, small potatoes! lol 🤣😂🤣

Second channel is great also keep it up .

I ahve watched all of your video's on both channels. I watch them the day they come out and sometimes I watch ones I like again and again.

Sorry to here that I watch whatever you post I love your content ,keep on the path that's working for you .

I follow both channels. With a big thumbs 👍 up from South Carolina

the trailer is looking good Chad I hope the second channel picks up I enjoy all of your videos

I could watch myself in time lapse via security camera but that will make me think about how much work I do in a day That was a clever way to angle cut the ramp section

Have you thought about an exhaust fan on the gable end of your shop? Up at the gable it should pull the smoke out and not cause an issue with losing cool air.

It's funny you said that at the end about the pressure treated and the price at the big box store. I've found I can get wood at the mom and pop store (there are very few of those left around me, but there are a few still doing business with all the big builders) for about HALF what they charge at the blue or orange place.. yeah, that's where they get you.. it seems like the prices went up around 5 years ago and at the box stores they NEVER WENT BACK DOWN. Everywhere else it's just about back to normal (other than the inflation we're dealing with)

i watch both channels cause i like you. don't change you. i'll keep watch'in both.

Hey Mr Chad. Really enjoying your trailer build, I welded for a company years ago, but never had to weld vertically. Your vertical welds look Great. That takes many years of practice to do that. I know you probably have been welding for years and years. I also am subscribed to both your channels. enjoy them both!!

Time lapse has its place and I think you use it well.😀

gonna be a heck of a nice trailer! doing a great job. time-lapse continue. t&t extra is enjoyable

I watch both of your channels and love them both !!! You do a fantastic job . I'm getting ready to turn a old 5th wheel camp trailer into a flat bed and I'm learning all kinds of things from your build, thanks for the ideas.

Ok everyone, press the like button first then watch the video

Chad at trailers coming together fine Dandy I like it I wish I could do all that but I'm too old to start I'm busy on my house all the time so I'm doing just good keep it up at my age if I love watching yours your second Channel I watch it sometimes I forget it that you have that channel but usually if it pops up I know it's there and I've been so busy working on the house 73 years old I can't get much done so it cuts down my watching shows on RU-vid and Facebook if you have it on any other channels I don't know about those that I will be watching as much as I can right now I'm busy putting floor down in my bathroom all new Hardwoods it's hard on the knees so I know about your needs it's definitely an ouch I'm going to get busy and do something till next time I'll be watching thank you for all your content in the trailer looks good

Hey man good to see you !! I couldn’t see your video until this morning.. Trailer is looking Great ! Steel along with Everything is Very Expensive 🙀🙀🙀🙀

I have enjoyed both of your channels and definitely hope to see you keep adding videos to each. Good luck my friend!!

First thing I do is hit the like button cuz I know it’s gonna be good if it’s on this channel. 👍🏻

Love both of your channels, you do whatever you need to. On a different note I have watched your latest video twice and haven't seen a single add