Тёмный

Honda Civic EM2 Coupe | HID Bi-xenon Projector Retrofit (blackout) DIY installation 

Retrofitlab.com
Подписаться 53 тыс.
Просмотров 815 тыс.
50% 1

Honda Civic EM2 Coupe Bi-xenon projector retrofit installation video. Projectors used are the Mini D2S 3.0's. These fit directly in the H4 halogen headlight housings.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
retrofitlab.com/products/hond...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:05 Heat the headlight to soften the sealant
0:28 Remove the bulb cap and place the projector in the fitting
0:40 If necessary adjust the rubber ring to make the projector's beam high enough
1:25 Place the shroud to see if any cutting is necessary
1:40 Cut the shroud with a dremel
2:09 Sand the shroud to make it ready for painting if necessary
2:15 Clean it before painting
2:35 Like the shroud, Scotch brite is used for sanding lightly before painting the reflector
2:50 First paint it with a layer of plastic primer
3:10 Remove orange insert if wanted
3:40 Paint black after plastic primer has dried up
4:00 Mount the insert back in the lens
4:20 Mount the projector
4:38 Place the shroud on the projector
4:50 Make sure the projector nut is tightened
5:00 Clean the lens from fingerprints
5:12 Place the lens back on the housing, heat the headlight again and press the lens back on.
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
/ europeanheadlightcommu...
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: / retrofitlab
Messenger: www.m.me/Retrofitlab/
Instagram: / retrofitlab.com_official
Our website: www.retrofitlab.com/
#Honda #Civic #HondaCivicEM2 #Model #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.

Авто/Мото

Опубликовано:

 

24 авг 2014

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 236   
@etakishinji7266
@etakishinji7266 5 лет назад
One of the best videos yet. No background annoying music. Just the sound of work and progress. Pls do more videos. *Subscribed
@Retrofitlab
@Retrofitlab 5 лет назад
Thanks :-) (and sorry, sometimes we do use background music :-))
@Rone8Eleven
@Rone8Eleven 4 года назад
​@Retrofitlab.com I wanted to thank because I learned so much from your videos. A few months ago I did a Morimoto d2s 5.0 retrofit on my 2017 Honda Civic Si and it came out amazing. Baking the headlights in a box was very helpful to me. :)
@Retrofitlab
@Retrofitlab 4 года назад
Good to hear :-)
@Sk8f8619
@Sk8f8619 8 лет назад
Very good detailed video! Subscribed for forsure now!
@vioxxx25
@vioxxx25 9 лет назад
Omg!!! Nice work!!
@TheCarista
@TheCarista 7 лет назад
What about the wireing? Can you show us that/explain?
@tomaslozano6486
@tomaslozano6486 Год назад
nice work
@Retrofitlab
@Retrofitlab Год назад
Thank you 🙏
@crisr4667
@crisr4667 7 лет назад
good to know i got these same projectors and my housing is the same size as that civics good thing i have a dremel too to make it fit😂 now i just need to make a box like the one you made
@maynardduldulao38
@maynardduldulao38 Год назад
What wss the size ofyour projector
@kalei43
@kalei43 4 года назад
Mind blown on your set up to bake them in, I’m definitely going to have to try that
@Retrofitlab
@Retrofitlab 4 года назад
Not the prettiest but if it works it works :-). We also made a video of how to make one yourself ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r7D8dex_Sqg.html
@kalei43
@kalei43 4 года назад
Retrofitlab.com thanks for the link that’s awesome.
@Retrofitlab
@Retrofitlab 4 года назад
@@kalei43 Good luck and be careful :-)
@LamborghiniReven1000
@LamborghiniReven1000 7 лет назад
What kit would you suggest for a 90's VW Corrado VR6?
@daskapil
@daskapil 8 лет назад
very detailed, Love it, I was just looking for this only. Thanks Brother
@sameterdogan2748
@sameterdogan2748 6 лет назад
Gerçekten 10 numara işçilik tebrikler
@dudenli
@dudenli 5 лет назад
i am planing my nissan rogue 2018 model. have you done any what size should fit? thank you
@fredtorresp
@fredtorresp 8 лет назад
Hi there thanks for the video I'm very interested, I read in the comments that it comes with a h4 adapter so it's plug and play but what about the ballast?
@palwindersingh7268
@palwindersingh7268 7 лет назад
Can u plz tell me how i can connect wired of my light. My light have a three wires ?
@michaelpeters3343
@michaelpeters3343 8 лет назад
Hello, after alot of research I heard I need a projector and to retrofit unless I want to blind everyone, and I dont want that! What size projector would fit a 2003 honda civic ex?
@khaled6100
@khaled6100 10 лет назад
I think i'm in love :)
@khaled6100
@khaled6100 10 лет назад
I'm straight lol . but its a very good look :)
@XplosiveFuZioNHD
@XplosiveFuZioNHD 9 лет назад
Can you retro fit Acura Rsx lights? With S2000 projectors?
@MATRIX-my6md
@MATRIX-my6md 6 лет назад
Can you pease tell how repair bi xenon hid projecter dim and bright cap problem and how to fix that
@HTrntrs
@HTrntrs 6 лет назад
I wanted u to black out the headlight & u actually did 😘😘😘
@adeelshahzad8644
@adeelshahzad8644 4 года назад
Did u find any vdo for black out??
@HTrntrs
@HTrntrs 4 года назад
Adeel Shahzad Bohaut sari hain RU-vid pe
@ronniecason9807
@ronniecason9807 8 лет назад
i have a 97 civic that im looking to retrofit seeing as how i have to get new headlights for it to pass inspection what kit would you recommend for my car and i live in the US thanks in advance
@fatih34balci
@fatih34balci 3 года назад
so nice awesome
@Retrofitlab
@Retrofitlab 2 года назад
Thanks! :-)
@209golightly
@209golightly 7 лет назад
could i but theese and take a part and paint and tint the reflector and led? what did you use to take off the crome and paint
@leemichaelhawkes
@leemichaelhawkes 7 лет назад
Hi there, I take it the projector uses a h1 bulb, which is single filament for headlamp only, so where's the main beam? Or does the projector take a h4 or h7?
@LuisLopezz
@LuisLopezz 9 лет назад
My car have the big holes for the h4 bulbs like this Civic, could I use the Morimoto H1 or only Mini D2S??? HELP!
@zaycowuidmatamoros6016
@zaycowuidmatamoros6016 4 года назад
Me gusta el metodo que usas para calentar el foco exelente todo el trabajo
@Retrofitlab
@Retrofitlab 4 года назад
gracias :)
@juanperla3155
@juanperla3155 9 лет назад
Does the 3.0 will fit on the Em1 headlights?? And what size of bulb fit the 3.0? Thanks.
@davidgirga13
@davidgirga13 7 лет назад
Hi Retrofitlab, random question but what size is that box you use to heat the headlights in? Great work by the way you make it seem to easy.
@joetoscano5106
@joetoscano5106 6 лет назад
Do you guys have shrouds with halo lights? If so which ones?
@carlosalvarez9762
@carlosalvarez9762 8 лет назад
What Black paint do you use on these? @Retrofitlab
@carloshere6909
@carloshere6909 7 лет назад
can you use 2.5. mini set on 1998 civic
@koushick007
@koushick007 8 лет назад
@retrofitlab do you guys have any kit for 2011 scion xd?
@Anjooo.86
@Anjooo.86 8 лет назад
You guys have any for the 2004 civics?
@adriang7242
@adriang7242 8 лет назад
any video of wireing them and how they look on?
@dato8049
@dato8049 6 лет назад
what type of glue is used to seal the lighthouse?
@Awall440
@Awall440 10 лет назад
so where does the solenoid plug into?
@josephtiong5649
@josephtiong5649 6 лет назад
any idea how to dismantle tail light lens??
@antonibanus5591
@antonibanus5591 4 года назад
nice!
@Retrofitlab
@Retrofitlab 4 года назад
Thanks :-)
@netuno96
@netuno96 9 лет назад
what shroud is this ??
@eddienakamura4334
@eddienakamura4334 8 лет назад
what type of projector did you use for this em2 headlight assembly
@user-bz6uf7wr2w
@user-bz6uf7wr2w 4 года назад
This is Koito Q5 projectors. Like mine.
@KawasakiZ-yd5fq
@KawasakiZ-yd5fq 10 лет назад
can you make a video how to connect the harness?
@ramikramikov802
@ramikramikov802 5 лет назад
Классно!!!!!!сделай пожалуйста на Chrysler Pacifica
@brady1465
@brady1465 8 лет назад
does the factory alignment for headlights unit still work when the lights are retrofit with projectors? and if not, how did you align them
@63ch31
@63ch31 5 лет назад
It can be adjusted like before. That's the entire reason for mounting it in the existing reflector.
@caaco2022
@caaco2022 3 года назад
Nice
@Retrofitlab
@Retrofitlab 3 года назад
Thanks :-)!
@oOalvaradoOo
@oOalvaradoOo 8 лет назад
So where can I learn to wire all the high beams stuff?
@0zakaMarek0
@0zakaMarek0 8 лет назад
Nice guide guys, well done. What would you recommend to fit into Honda Civic VIII gen (2007)?
@0zakaMarek0
@0zakaMarek0 8 лет назад
TA!
@954Brad
@954Brad 8 лет назад
what shroud is being used here?
@xtoorgaming3982
@xtoorgaming3982 5 лет назад
savage! no PPE was involved on this build lmao
@fahruddinomar4487
@fahruddinomar4487 7 лет назад
can use to toyota acr30?
@CrimsonHawk09
@CrimsonHawk09 7 лет назад
2 questions. Can you adjust the projectors once installed? Im doing this to a truck in the future and it will be epoxied in unlike your video which is screwed on. Are there little adjusters on the projector itself?
@CrimsonHawk09
@CrimsonHawk09 7 лет назад
+Retrofitlab well its gonna suck having to epoxy the projector right the first time. I have to trim the back a bit since it wont screw like yours. i found the how to nut didn't mention adjustment.
@foxideart292
@foxideart292 8 лет назад
do you guys ship international ?
@slimhonda6352
@slimhonda6352 5 лет назад
is this compatible with l.e.d bulbs? or do you have to fit them as well?
@Retrofitlab
@Retrofitlab 5 лет назад
We don't advise to use LED bulbs in the projector because light output and pattern is usually quite bad. Examples here; www.retrofitlab.com/blog/h1-led-versus-xenon-mini-h1-projector/
@adriang7242
@adriang7242 8 лет назад
i have a em2 do you guys sell the kits?
@omarsaleh4160
@omarsaleh4160 8 лет назад
how much it coast to do it if i bring my car to you i have civic ?
@ianjuarez30
@ianjuarez30 5 лет назад
Hi, what spray can did you use? Thanks!
@Retrofitlab
@Retrofitlab 5 лет назад
Normally a heat resistant paint or even normal paint can be used, but preparation etc is dependant on the the specs by the manufacturer of the paint.
@santhoshkrishna7122
@santhoshkrishna7122 6 лет назад
Ford ikon 1.3 flair how to install
@berkeerdener8795
@berkeerdener8795 7 лет назад
What is the name of your lens?
@FARGA77
@FARGA77 9 лет назад
have you tried this with the original (oem) headlights? it should be the same process right?
@FARGA77
@FARGA77 9 лет назад
Do I have to change the 9006 bulbs to h4?
@GerardoGarcia-rs9bq
@GerardoGarcia-rs9bq 7 лет назад
Can u plz do a vid how to wire them in
@DiogoDC123
@DiogoDC123 7 лет назад
its literally plug and play with the morimoto kit
@abdulrahmansaleh3391
@abdulrahmansaleh3391 7 лет назад
thanks, easy work ... may I know what type of sprays you used (color) coz not all colors give good look. tq
@abdulrahmansaleh3391
@abdulrahmansaleh3391 7 лет назад
great brother, thanks. what about the blub what type can be fixed .. I bought this bulb www.lazada.com.my/2x-led-h49003-headlight-lighting-16000lm-160w-conversion-bulb-beam6000k-ld912 17248395.html?Orderconfirmation&Email&LineItem if that bulb cant then should be this bulb? www.lazada.com.my/80w-cree-led-h8-bulb-angel-eye-halo-light-for-bmw-e90-e92-e82-e60e70-x5-e71-e89-8974544.html?mp=1 sorry I am not sure the links will work or no :)
@victorraulgalleguilloscarq7983
Me gustaría saber cómo haces la conexión para h4, para que quede funcionado cuando se hace el cambio de luz
@Retrofitlab
@Retrofitlab 5 лет назад
The best way is to connect the ballast with this cable: www.retrofitlab.com/en/wires/h4-diode-1.html
@DannyKhoo89
@DannyKhoo89 9 лет назад
You guys are crazy! Spraying without a glove or even taking off your watch? Haha
@DannyKhoo89
@DannyKhoo89 9 лет назад
***** Keep up the good work! Would love to see the headlights on the car
@santossagastegui7167
@santossagastegui7167 5 лет назад
Solo haces modificaciones a autos del 2005 hacia arriba , qué opinas de modificar las luces de autos antiguos y darle otra vista Por ejemplo los Toyota ,Nissan , etc
@Dahveeddude
@Dahveeddude 7 лет назад
I got quoted for a D2S 4.0 , halos, painting the housing and the harness/install done for $800 on a 2007 Honda Ridgeline. Would you say that price is pretty steep or justified? I understand as a business you want to make twice the materials cost but it still seems like a lot.
@CarlitosBXNY
@CarlitosBXNY 6 лет назад
David Cardenas That’s definitely a lot, how much were the parts?
@danhaines
@danhaines 4 года назад
What is the spray you paint the chrome parts with before using black spray paint?
@Retrofitlab
@Retrofitlab 4 года назад
We used a primer first :)
@lujus3854
@lujus3854 5 лет назад
Hello how are you asked if you have done any optics of a Ford Focus mk3 model 2017 and up
@Retrofitlab
@Retrofitlab 5 лет назад
Sorry we did not perform this retrofit yet..
@JoseChavez-xr3jt
@JoseChavez-xr3jt 5 лет назад
What kind of head lights are thoes kinda dark?
@Retrofitlab
@Retrofitlab 5 лет назад
They are sprayed black if that is what you mean :-)
@alexandreandrade7104
@alexandreandrade7104 4 года назад
Muito bom!
@Retrofitlab
@Retrofitlab 4 года назад
Thank you very much :)
@dudenli
@dudenli 5 лет назад
i have nissan rogue headlight has leds around the side. is it ok to heat the lens. does it get damage during heating process?
@Retrofitlabcom
@Retrofitlabcom 5 лет назад
It is ok.. Just don't heat them for too long :)
@dudenli
@dudenli 5 лет назад
thank you
@a121391
@a121391 5 лет назад
esos videos para autistas que no hablan como son mis favoritos, dejan todo a la imaginacion sobretodo para alguien que no sabe nada del tema y quiere aprender
@saitsaatcigil9830
@saitsaatcigil9830 3 года назад
My Friend, How are you? Do we paint the inside of the headlight with heat resistant paint? For example, we will paint it black! How is it normally done? Can you please explain? Thanks
@Retrofitlab
@Retrofitlab 3 года назад
Usually it can be done with normal paint from a spray can. But you can also use heat resistant paint, this usually has a nice flat finish. The pro's also use automotive grade 2k spray spaint.
@javedakhtarup79ansari15
@javedakhtarup79ansari15 4 года назад
Nice wark..
@Retrofitlab
@Retrofitlab 4 года назад
Thanks!
@ianjuarez30
@ianjuarez30 3 года назад
Does the shrouds don’t fit without trimming it?
@Retrofitlab
@Retrofitlab 3 года назад
No they won't. You need to trim them in order to make them fit.
@michaeldeakin5774
@michaeldeakin5774 4 года назад
Hi guys, i have a honda using h4 fitment, what bulbs should i use and how do i wire it up for the hi/low function. Excellent vid btw, love the look.
@Retrofitlab
@Retrofitlab 4 года назад
We would recommend to use a bi-xenon or b-led projector instead of plug and play xenon or led bulbs.. :) for example the Aharon optimus TR. For the H4 bi-xenon function on a projector we have H4 cables with outputs to the ballasts and projector for hi/low www.retrofitlab.com/en/aharon-optimus-tr-bi-xenon-projectors-1.html
@catalinpetre2425
@catalinpetre2425 10 лет назад
Centering rings are helping with something ? How adjust the projector ? Thanks and sorry for my english !
@catalinpetre2425
@catalinpetre2425 10 лет назад
But for 2.5 inch are necessary ?
@hamzarashid9276
@hamzarashid9276 3 года назад
At what temperature you heated the light and by using what
@Retrofitlab
@Retrofitlab 3 года назад
In general, 2 methods are used, with both methods, be careful and patient. Method 1 is using a regular oven. Preheat the oven at 200 degrees Celsius. When ready, switch off the oven and place the headlight inside. Make sure that the headlight is not touching any metal of the oven by placing a cloth over the grid, for example. Leave the headlight in the oven for 10-15 minutes before opening it. If the headlight kit is not yet soft enough, put the headlight in the oven for a bit more time. Method 2 is suitable for larger headlights that do not fit in a regular oven, or if your lovely wife absolutely does not allow car parts to be baked in her kitchen. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
@alvinrodriguez939
@alvinrodriguez939 4 года назад
What brand of sealant did u used ?thanks.im from philippines😊
@Retrofitlab
@Retrofitlab 4 года назад
Please see this link: www.retrofitlab.com/en/accessories/butyl-rubber-sealant.html
@zodiactrip
@zodiactrip 4 года назад
How you know from which side is the projectors left and right?
@Retrofitlab
@Retrofitlab 4 года назад
The projectors are identical, there is no left or right side :)
@arbergashi5194
@arbergashi5194 8 лет назад
Retrofitlab can you make a video for Fiat Stilo plz
@vicmar858
@vicmar858 6 лет назад
What materials aside from the box do you need to make that box?
@vicmar858
@vicmar858 6 лет назад
Hate to bother you again, I wanna know what cylindrical item did you use where you placed the heat gun? And what items did you use to hold the headlight in place inside the box? I saw previous comments where you’re emailing people about how to make the box can I get those instructions too? Highly appreciated thanks :)
@vicmar858
@vicmar858 6 лет назад
Thanks a lot 👍🏻, love your videos btw.
@Ozuma99
@Ozuma99 5 лет назад
Does the blackening have any effect on the projected light?
@Retrofitlab
@Retrofitlab 5 лет назад
For low and high beam it won't, because the Aharon bi-xenon projector is used and the reflector part isn't used to reflect the light anymore.
@Ozuma99
@Ozuma99 5 лет назад
Thank you for the reply. I thought so but I wasn’t sure. You cleared all my doubts. Thank you.
@xJinzoh
@xJinzoh 4 года назад
Where can I get the rubber ring??
@Retrofitlab
@Retrofitlab 4 года назад
From a retrofit company, like us, www.retrofitlab.com :-) Please contact us to order.
@cameronsmith1149
@cameronsmith1149 4 года назад
please do this on a set of 04-05 civic headlights, i and i’m sure others would be happy to see one
@Retrofitlab
@Retrofitlab 4 года назад
Maybe in the future :-)
@Rone8Eleven
@Rone8Eleven 4 года назад
Its the same exact thing for 04-05
@Retrofitlab
@Retrofitlab 4 года назад
@@Rone8Eleven Nice!
@misha1151
@misha1151 6 лет назад
so you can't use regular halogen H4 bulb with a lens, can you?
@Retrofitlab
@Retrofitlab 5 лет назад
No, the bi-xenon projector can't hold H4 halogen bulbs. The high beam function is handled by the projector instead of the the bulb.
@michaeldeakin5774
@michaeldeakin5774 4 года назад
What bulbs are used?
@furkanerkan119
@furkanerkan119 9 лет назад
Mercek markası nedir?
@262676
@262676 8 лет назад
What brand are the headlights that you used?
@262676
@262676 8 лет назад
+Retrofitlab What about the shroud?
@262676
@262676 8 лет назад
+Retrofitlab thanks. looked like it fit well in the housing. what ballast and bulb combination do you know of for highest light output(oem wise)?
@carsonallen5233
@carsonallen5233 9 лет назад
How does The shroud stay on?
@carsonallen5233
@carsonallen5233 9 лет назад
And the clips connect to the fixture that is to be mounted correct?
@CristianMihalyi
@CristianMihalyi 8 лет назад
Are these modification legal?
@CristianMihalyi
@CristianMihalyi 8 лет назад
***** Italy, do you know something about it?
@Soysauce337766
@Soysauce337766 7 лет назад
How many watt is your heat gun??
@decepticonleader316
@decepticonleader316 7 лет назад
Retrofitlab I have the same lights in my ES1. thanks for the tutorial. gonna work on this project this week.
@markbanuelos4420
@markbanuelos4420 6 лет назад
Can one just buy these off of a website or something?
@wilson24p
@wilson24p 7 лет назад
how many minutes to heat tha headlight?
@wilson24p
@wilson24p 7 лет назад
thank you for your response, ok i will try that this coming weekend, i have already retrofit ready to install.. 👍👍👍
@phoenixst0ne23
@phoenixst0ne23 6 лет назад
how did you make that box to heat up the headlights..i want to make one
@geo1mz
@geo1mz 10 лет назад
can you guys retrofit gen 1.5 toyota solara Retrofitlab.com
@maher11100011
@maher11100011 6 лет назад
where test????
@adrianorodrigues1399
@adrianorodrigues1399 Год назад
Faz no farol do GM Agile
@Celsolzjr
@Celsolzjr 5 лет назад
What projector used?
@Retrofitlab
@Retrofitlab 5 лет назад
Mini D2S projector: www.retrofitlab.com/en/aharon-mini-d2s-bi-xenon-projectors-30-1.html
@Celsolzjr
@Celsolzjr 5 лет назад
Thank you
@maynardduldulao38
@maynardduldulao38 Год назад
Wat is the size of your projector assembly 2.5 or 3.0
@azkabolang
@azkabolang Год назад
Hi it is 2.5 projector
@maynardduldulao38
@maynardduldulao38 Год назад
Is 3.0 fit in thjs
@oprashanth
@oprashanth 5 лет назад
Where is the performance of the lights on road?
@Retrofitlab
@Retrofitlab 5 лет назад
We do not have a result picture of this, sorry!
@cesarmunoz9777
@cesarmunoz9777 5 лет назад
Very good but ,can you explain about the box and heatgun in some video is very interesting?
@Retrofitlab
@Retrofitlab 5 лет назад
Hi, the box is used an oven to heat the headlight. A large cardboard box is used where hot air is blown through a heatgun. Make sure that the hot air of the heatgun does not blow directly to the headlight, place the headlight on small elevations so that the air can circulate properly through the box. We use a setting of 300 Degrees Celsius for 12-18 minutes / 1st lowest setting, depending on the size of the headlight.
@cesarmunoz9777
@cesarmunoz9777 5 лет назад
@@Retrofitlab ok thanks i need practice this in my headlights, congratulations very nice work,see you in the next video
@TherealWinterpillow
@TherealWinterpillow 5 лет назад
Stick the housing in the oven at like 250 for about 7 minutes will have the same results. Just be sure you put the headlight on a couple 2x4s and make sure it’s in the center of the oven.
@OO7RX7
@OO7RX7 4 года назад
Can you please do a s70 head light convertion
@Retrofitlab
@Retrofitlab 4 года назад
Perhaps in the future :) Please stay tuned to our RU-vid channel!
@davidrojas1528
@davidrojas1528 5 лет назад
excellent video you could do it with the headlights of the toyota yaris 2001 sedan
@Retrofitlab
@Retrofitlab 5 лет назад
Thanks!! :) Maybe later, will keep it in mind!
Далее
ТЫ С ДРУГОМ В ДЕТСТВЕ😂#shorts
01:00
How To: Make Projector Headlights for Your Car
10:46
Просмотров 1,3 млн
HID Projector Retrofit Mounting Methods Explained
9:59
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 4,2 млн
Мальчик стал гонщиком в 5 лет
0:14
Lavage de voiture 😂
0:21
Просмотров 3,1 млн