Honda Crankshaft Bolt Removal - 100% Guaranteed!

Подписаться 16 тыс.

Просмотров 140 тыс.

50% 1

Honda Crankshaft Bolt Removal - 100% Guaranteed! - Many different methods with the last one being a guarantee! See links for tools below!
(I didn't have a strong impact or an air-driven impact, but this video is aimed at people with somewhat basic tools)
Thick-walled Socket (Recommended!):
Thick walled 19mm socket (off-brand) (Used in the video!): amzn.to/2QlEFC7
Lisle 77080 19 mm Harmonic Balancer Socket for Honda: amzn.to/2Uei0Jj
Breaker bar:
GreatNeck BB18 1/2 Drive 18 Inch Breaker Bar (Used in the video!): amzn.to/2TUo9v6
Tools:
Standard Propane Fuel Cylinder - Pack of 3: amzn.to/2wb3Yju
Metric Wrench Set 8mm - 22mm: amzn.to/2xQn3ot
Socket Set 123pc Metric and Imperial - Good Quality: amzn.to/2NhqhL9
Impacts:
AIR - AIRCAT 1150 "Killer Torque" 1/2-Inch (1,295 Feet-pounds (ft-lb) of loosening torque and Max. Torque 900 ft-lbs): amzn.to/2IQTCYJ
BATTERY - Milwaukee 2767-20 M18 Fuel High Torque 1/2-Inch (1,000 ft-lbs of fastening torque and 1400 ft-lbs of nut-busting torque.): amzn.to/33k3wf0
WATCH THE OTHER VIDEOS ON MY CHANNEL!!! I REPLACE: TIE RODS, LOWER BALL JOINTS, CV AXLES, SWAY BAR LINKS AND MORE!!!
SUBSCRIBE FOR MORE!
The car in the video is a Saturn Vue 3.5L AWD 2007. However, the procedures shown in the video will apply to most vehicles and applications.
ACURA MDX 2003-2013
ACURA RDX 2013-2016
ACURA RL 2005-2012
ACURA TL 2004-2008
HONDA ACCORD 2005-2012
HONDA ACCORD CROSSTOUR 2011
HONDA CROSSTOUR 2012-2014
HONDA ODYSSEY 2005-2010
HONDA PILOT 2005-2015
HONDA RIDGELINE 2006-2014
SATURN VUE 2004-2007
and more!
Video Title: Honda Crankshaft Bolt Removal - 100% Guaranteed!
Video File Created Date: Saturday, March 7, 2020 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using RU-vid Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your RU-vid videos offline... Then upload!
-- ginkosolutions.com/youtube-bul...
-- GinkoSolutions.com
Video Tags:
honda, crankshaft, bolt, honda crankshaft bolt removal, honda crankshaft bolt, honda crank shaft bolt, harmonic balancer socket, harmonic balancer bolt, lisle 77080, 19mm socket, honda 19mm socket, crankshaft bolt, crankshaft bolt removal, remove a crankshaft bolt, crankshaft bolt stuck, crankshaft bolt removal tool, crankshaft bolt won't come off, crankshaft bolt removal direction, honda crankshaft, honda crankshaft pulley bolt removal, honda crankshaft pulley bolt

Авто/Мото

Опубликовано:

15 мар 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 135

@TutorialGenius 4 года назад

Like and subscribe for more! All parts, tools and more information in the video description. If this video helped you, please support the channel by clicking "Thanks"! We also have memberships to our channel with great perks! ru-vid.com/show-UC0HkS2-1Tk1ULQJj3uGbjdwjoin Thanks for watching!

@fisherjunior6903 3 года назад

Pro tip: you can watch movies at kaldrostream. I've been using it for watching a lot of movies during the lockdown.

@deaconmaurice8626 3 года назад

@Fisher Junior Definitely, I have been watching on kaldrostream for since december myself =)

@stevanrose7439 11 месяцев назад

When using an electric or air impact if you hold the socket while trying to remove a bolt or nut it will help in removal. Holding it won’t let the socket flop back and forth it only allows it to deliver the impact to the bolt. I had a guy trying to remove nuts from a skidsteer wheel with an electric impact and he couldn’t get them to move and I showed him how to hold the socket and they all came off.

@elijahrecord7285 Год назад

Thanks for video. I used to do this and forgot but your content was nice and fresh.

@aaronwiernasz3859 9 месяцев назад

Hey I want to really thank you! After three broken sockets and a broken 1/2-in extension I tried your bump method and it worked flawlessly. This was a lifesaver, I'm very grateful to you for posting this, thanks again.

@TutorialGenius 9 месяцев назад

Glad it helped!! :)

@bradenmorey6527 8 месяцев назад

How many miles were on your engine when doing this?

@s34nvideos 8 месяцев назад

If i remember rightly, perhaps 225K@@bradenmorey6527

@dafukenpig 2 года назад

Thank you! Liked, subscribed, commented. You saved my day! I knew right away when you said you were going cowboy style, this was the video for me

@TutorialGenius 2 года назад

Thanks for watching! Glad it helped!

@johnny4713ify Год назад

Cowboy method didn't work for me. The bolt was so tight it actually raised the car each time I bumped it. Tried everything then I finally borrowed a 1inch Semi air impact from the mechanic shop. When it let loose it sounded like a gun going off. The most insane fastener I've ever dealt with😂

@guser813 Год назад

Nothing worked until I watched your video. Once I tried your cowboy message, it worked immediately it was a huge lifesaver. Thank you.

@TutorialGenius Год назад

Great to hear!!! 🔥🔥

@tattoosteveneo 9 месяцев назад

Well then. I think I know what I’m going to start with!! Not even gonna try the other methods. I’m going straight for the crank method. Thanks for this video!

@TutorialGenius 9 месяцев назад

haha great to hear!! Good luck! :)

@bkupkee 2 года назад

Working in the garage with no lift, setup was similar to yours and tap the ignition was the only way to go, bolt was off in a minute rather than an hour. The only thing I did different was lodge the power bar 'on top' of the subframe, to the right. Lifesaver video for us backyard mechanics!! Well done.. Now, off to get a Harmonic Balancer Socket so I can torque the bloody thing back on!! Thanks so much!!

@dethmetl Год назад

Thanks for this awesome video. It saved me so much time. But took us 5 hours to try it...lol

@TutorialGenius Год назад

Glad it worked out in the end!! Thanks for sharing!

@mattedwards8424 Год назад

WOW!! Saved me a ton cowboy it up. Thank you

@TutorialGenius Год назад

Glad it helped!

@TheJester667 2 года назад

My bolt is in with the force of Thor's impact hammer. Tried a crappy air impact with that giant socket, long breaker bar with the harmonic balancer socket holding it still ( I actually broke part of the harmonic balancer and a big chunk off that socket while putting all my force into it ) and have tried the engine bump at least 6 times in different ways, bastard hasn't broke loose. Bought a DeWalt impact with 1,200 lbs of breakaway torque. Waiting on new harmonic balancer to show up before I go at it. Appreciate your videos, did my valve timing job based on one you did and about to do the timing belt and water pump as well. Really glad I found your videos on the same vehicle I got!

@s34nvideos 2 года назад

Just checking: you're turning it the correct way, right?

@TheJester667 2 года назад

@@s34nvideos Wouldn't that be embarrassing. Yeah it's going the right way, engine bump only goes the one way 😂 I've soaked it in PB blaster for days too, all that accomplished was it splashing all over the engine when I decided to just drive it the next day.

@s34nvideos 2 года назад

@@TheJester667 oh yeh, good point! Do you have the thick walled socket?

@TheJester667 2 года назад

@@s34nvideos Yep that's what I used with the crappy air socket and the breaker bar. New harmonic balancer supposed to show up today so I'll give the new Dewalt a go with that big socket tomorrow.

@TheJester667 2 года назад

@@s34nvideos Update for ya, the Dewalt did not do it lol. Had to take it to a shop, mechanic tried everything he had as well then ended up having to use an acetylene torch on the bolt to get it to break loose. That's how stuck it was! No wonder I broke tools and now I don't feel so bad that I couldn't get it done. Now it's all half way apart so I will be able to do my water pump/timing belt job and pop the new harmonic balancer on that I bought to replace the one I beat up.

@sithieu9009 6 месяцев назад

Learning new stuff from this

@nls707 Год назад

I did this method and used a ratchet strap to tie onto the control arm so the breaker bar would not move on a 2016 accord v6 and it worked!

@TutorialGenius Год назад

Glad it worked out!

@Wideglide66 4 месяца назад

Did the trick for me! Thanks for the vid.

@TutorialGenius 4 месяца назад

Good to hear!

@MyLifeThai371 Год назад

I just broke the crankshaft pulley bolt loose on my 2008 Honda Fit! I used a "3:1 Torque Multiplier ($257 new on Amazon)" and the crank pulley holding tool ($13). I ran a bunch of 1/2" extensions out from the multiplier and rested them on a jack stand and used a breaker bar with a 4 ft. cheater pipe on it and it broke loose. Even though the torque multiplier is rated for 1100 ft/lbs, I still had to put out on that cheater pipe. My 450 ft/lb. electric impact with the special crankshaft 19mm socket from Honda was not enough to break it loose.

@cowthedestroyer Год назад

Done that when i didnt feel like removing the rad on my truck to get my 3/4 impact in there. Works like a charm and is the single fastest thing you can really do honestly

@TutorialGenius Год назад

🔥🔥🔥

@ennellyvonswortts4223 10 месяцев назад

I can't get ANY socket to sit firmly enough on the bolt head to do the cowboy method. XD

@thomaskreutzer 2 года назад

cowboy method didn't even work, 20 years of changing timing belts and never struggling like this

@abbashaider8668 Год назад

Did you get it off?

@thomaskreutzer Год назад

@@abbashaider8668 nope

@ditiromotene2582 11 месяцев назад

Ever work on a honda

@attackofthesingletrack 11 месяцев назад

@@ditiromotene2582 many times over

@riskfreesolutionsforbusiness 3 месяца назад

if you put car in gear foot on break is that good enough or do you have to lock flywheel too to avoid damage internally to the engine.

@troy78552 Год назад

Thanks for the video , I have a important question ? How do you troubleshoot a crankshaft pulley that is not aligned with all pulleys on a 2014 Honda Civic ex 1.8

@romeosabaldan58 3 года назад

Helpful, useful thanks

@TutorialGenius 3 года назад

Thanks for watching! Please like and subscribe if useful. Thanks!

@katolight Год назад

On my 2014 Accord V6, I tried everything you did, I purchased the largest Makita 1/2”, the pulley holder tool and still no luck. I seen where adding heat to it helps. I used my industrial heat Gun and heated the bolt to 300°. It came loose with the big socket and the Makita XWT08Z 18V LXT®... I think heat on the bolt is necessary.

@Ebklifestyle 2 года назад

Where did yu get those silver jack stands from & how much ?

@timothyjohnsonjr8975 Год назад

God bless you bro helps alot

@josundwa 5 месяцев назад

Thank you very much!

@TutorialGenius 5 месяцев назад

You're welcome!

@wtdash 5 месяцев назад

And don't forget the woodruff key (half‑moon key) that will fall out when the pulley is FINALLY removed. It's in that slot on the crank shaft snout (where the bolt screws in).

@cristiandeocampo6279 2 года назад

Thanks man it's work.

@leob3595 2 года назад

would like to ask if a push start button car would b able to pull off this trick; mine's a '14 accord . for my case i had to send it to the local mech and they had to use a truck impact gun to get it off. sadly enuf, thy used the same heavy duty truck impact gun to put it back, now im having a hard time removing it to replace the seal and water pump...

@TutorialGenius 2 года назад

They should NEVER put that back on with an impact, it's over-torqued for sure, very silly! It could end up doing more damage in the long run. Depends on the car, but a remote start will probably work in all cases ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FOfxPDBf8ug.html

@MrBana232 Год назад

You just saved me. Cowboy up!

@TutorialGenius Год назад

🔥🔥🔥

@paintballalienindy09 Год назад

Cowboy method for the win can’t believe that worked, my Milwaukee ain’t got sh(t on that starter lol

@poke_hoard422 Год назад

Now that's my kind of easy and no broken knuckles

@madhusudantyagi7699 2 года назад

Just to be sure about how much of a "bump" is needed; turning the key part you showed in the video - was that enough to bump it enough and loosen the bolt? Thanks

@BoogieDownProduction Год назад

I would highly recommend disabling the car when doing this method. Dont want it to start

@davidnjennieprice 4 месяца назад

Although I didn't use this method, I successfully removed mine using: 1. The heavy triple-walled 19mm socket, 2. Kroil Penetrating Oil sprayed twice a day over 3 days, 3. Heated the bolt area with a electric heat gun, 4. Removed with a Harbor Freight EarthQuake 1000 ft-lb Air Impact Wrench. I first tried with an electric Impact which was not up to the task.

@TutorialGenius 4 месяца назад

Thanks for the update! wow what an ordeal! Hope it helps others!

@nimbapilot6925 2 года назад

Hey. Thanks for this video. Will this technique work for a 2007 odyssey?

@TutorialGenius 2 года назад

The principles will work with any bolt out there. Your Odyssey most probably has a J35 engine, so does mine.

@Monkeybizness707 8 месяцев назад

Unfortunately with the RL, the ignition will not let you bump the key since it automatically turns over until the car starts...I got the junkyard part off an Odyssey J35 while I'm waiting on the new pulley to arrive...would have been $452 for one at AutoZone, online price is $60 brand new...I went with a lightweight for $130...funny part is that AutoZone calls it a harmonic balancer despite the fact that it has none of the features of an actual harmonic balancer, which they stopped using outside of Ford and Chevy v8s anyways.

@angelisone 3 года назад

Since some vehicles steering wheel are on the opposite side like Australia, England and Indonesia. You would place the ratchet wrench (breaker bar) on top to brace it on rather than on the bottom. ATG suggests to do the ATG's complete timing belt kits: 1. Timing Belt 2. Tensioner 3. Water Pump with gasket 4. Pulleys 5. Rollers 6. All belts 7. Camshaft Seals 8. Crankshaft Seal (front) 9. Rear Main Engine Seal (good luck getting to this one) 10. Oil Pump's O-ring (good luck on getting this out, also) 11. Valve Cover Gaskets 12. Spark Plug Gaskets 13. Valve Cover Bolt Gaskets 14.Check all Motor Mounts. Pray that the back motor mount is good 15. Thermostat with gasket 16. Top & Bottom Coolant Hoses 17. Change all coolant hose clamps to screw type. 18. In and output hoses from firewall 19. Check ATG (auto timing groves on three placed @ Spark Plug #1) 20. Then hand crank the Crankshaft's Bolt clockwise (USA) and check ATG minimum of 4 times

@TutorialGenius 3 года назад

haha! I'm sure they do! Put a timing kit on and call it a day.

@ochaarul786 3 года назад

No you can't. You will tighten it, the pulley spins counterclockwise.

@jeremythagreat Год назад

@@ochaarul786 if you tighten it enough it will be loose...

@reuben.holmes.9690 8 месяцев назад

And replace engine

@vanmasterflash7153 11 месяцев назад

Thanks

@TutorialGenius 11 месяцев назад

Welcome! :)

@G5Hohn Год назад

The heavy socket actually has almost no effect on flexing. It's the weight alone that is doing the work.

@TutorialGenius Год назад

I respectfully disagree. I would like a source for your claim though, im happy to debate anytime

@G5Hohn Год назад

@@TutorialGenius The source to look at is the patent for the IR power sockets. Have you seen the IR power sockets? They have the same wall thickness as the regular sockets. Only the have essentially a large flywheel added. Because it's the mass (more specifically, moment of inertia) and not the stiffness. Read for yourself: patentimages.storage.googleapis.com/7f/39/3a/4ddae6d130f54b/US9463557.pdf

@TheWopper78 Год назад

Who knows what damage that can cause BUT IT WORKED! Nice work

@TutorialGenius Год назад

Great! I hope you will subscribe to me soon!

@justingrabowski8142 8 месяцев назад

We’ve been busting crank bolts like that forever. Doesn’t cause any damage.

@marlonbaltazar1680 Год назад

Undo all high tension plug before cranking itshould nit start the engine 👍😊

@TutorialGenius 10 месяцев назад

It won't, but for a tiny bump, I doubt it would have the chance to try and think about starting

@dewetwalter 2 месяца назад

dumb question...if you use an impact on the bolt does the pulley not just turn CCW? Or am I misunderstanding how an impact works?

@TutorialGenius 2 месяца назад

If you use an impact on the bolt, spark plugs in, drive belt is on, the pulley probably isn't really gonna move at all to be honest because it's high torque. If it's a really high powered impact, it'll remove the bolt If the impact is underpowered, the internal hammer will spin freely and the bolt won't be removed. It'll just make a noise like in the video If you google something like 'How an impact wrench works' there should be a good article! It's interesting!

@kyllemanuzon672 4 года назад

Where is your pulley located, at the right side or at the left side, i mean we have also a honda city, the pulley was wiggleing side to side, the side of the pulley is in the left when you are the driver side, im in the Philippines sorry for my bad english

@TutorialGenius 4 года назад

In the US: on the passenger/near side/right side of the car/engine.

@kyllemanuzon672 4 года назад

Aww, so your trick will not work on our car, because our pulley located at the left side, when you crank it, it will tighten, thank you for answering my question!! Godbless

@TutorialGenius 4 года назад

@@kyllemanuzon672 yes it will! Just put it on top of the control arm lol, not underneath! :)

@kyllemanuzon672 4 года назад

No i mean if i crank my engine then the spin of the engine will counterclockwise so how can i put the tools to untighten them, teach me how

@TutorialGenius 4 года назад

@@kyllemanuzon672 passenger side: If it spins clockwise, put wrench UNDER control arm If it spins anti-clockwise, put wrench ON TOP of control arm driver side: If it spins clockwise, put wrench ON TOP of control arm If it spins anti-clockwise, put wrench UNDER control arm lol :)

@petrkrska Год назад

It is a very old and easy think but some people Always must make a new ideas and forgot an old school rules...

@TutorialGenius Год назад

100%!

@smaloneytuba85 2 месяца назад

I have an electronic push to start on mine. I don’t think I can get it on and off fast enough without causing damage.

@hildavieira9463 2 месяца назад

Just unplug the spark plugs wires, the engine won't start.

@johng.3740 Год назад

I too ran into the "infamous" super-hyper-tight crankshaft bolt on an Acura integra, never did get it off. Has anyone tried a Torque multipler? There are torque multipliers on the market that can output 4275 ft lbs.....truckers use them all the time to take off stuck lugnuts on tires, with little effort. Look up torque multipliers on RU-vid and you'll find them boys remove high torque, over tightened, rusted up, stuck lugnuts with minimal effort.

@johng.3740 Год назад

Update.....I bought and used a torque multiplier to remove the crankshaft bolt from a 2001 Ford Taurus.....it was easy.....much much easier than using a breaker bar, just a couple of rotations of the torque multiplier and the crankshaft bolt was loose.

@RoninGunn Год назад

Cowboy method failed, snapped a half inch breaker bar though. Definitely worth trying though.

@TutorialGenius Год назад

What brand/material was that breaker bar?

@meanmachine6574 Год назад

Not all heroes wear capes

@TutorialGenius Год назад

Glad it was helpful! :)

@joseraya8998 3 месяца назад

Can the cowboy method work without the serpentine belt on?🤔

@TutorialGenius 3 месяца назад

Am I being trolled here? lol

@joseraya8998 3 месяца назад

@@TutorialGenius no sorry , sounded like common sense never tried it . BUT I did try it! And no luck:( Thank you ! 🙏🏼

@hoodgang6345 3 года назад

Do this work on a 03 Honda Accord ex?

@pcsbuffalo 3 года назад

Yes, I did it on my 2003 accord back in 2008.

@LeagueofLegendsPreRelease Год назад

06 Acura TL? Bump start it off?

@TutorialGenius Год назад

Sorry, what is the question?

@alexdyess5143 Год назад

Why is this not the top video? This could have save me days and an air compressor

@TutorialGenius Год назад

Glad it helped! :)

@Anthony11qq Год назад

Thanks good idea but I'll have too cowboy up the nerve to try it but l may soon be desperate 🤣

@TutorialGenius Год назад

It'll be fine!

@derrickroberts93 2 года назад

Saturn cars have Honda engines?

@TutorialGenius 2 года назад

A limited run did, yeah

@smithy2 2 года назад

Out trying to remove the pulley bolt at the moment, what if bumping the engine didnt work?

@TutorialGenius 2 года назад

If bumping didnt work, then check out the other comments here. Somebody even resorted to a acetylene torch!

@richardmatthew09 3 месяца назад

that is a Saturn 0:14 Honda? is that a J-swapped saturn?

@TutorialGenius 3 месяца назад

I think I don't understand your question, but everything is stock on here. Saturn with J35 engine, yep

@mornebecker3464 24 дня назад

Have a d17 engine Tried almost evrything bumped the key abt 10 or 15 times. The fucker still isnt loose

@chrishousingsolutions5875 2 года назад

I didn’t know GM / Saturn used Honda motors ?

@TutorialGenius 2 года назад

Most people don't! It was short lived, but those engines are workhorses!

@luciom3434 3 года назад

What about with a start button how would I bump it

@gtdodgeviper 3 года назад

I guess the only way would be to loosen up the negative battery terminal. Have someone push the start button and you remove the battery terminal very quickly so that it stops trying to start. If you damage something don’t blame me. I just use a longer breaker bar to remove mine. I put my feet on the brake caliper to push myself and the pull the bar. Took several tries but I did it.

@michaelrobledo 2 года назад

@@gtdodgeviper Another way would be to remove the wire going to the starter and use another wire or probe to jump it from the battery. Connect one end to the battery then touch the starter terminal briefly.

@TobyIAH Год назад

Wish I found this video 5 hours ago!

@nmarkose 11 месяцев назад

Now try that with the engine off the vehicle 😂😂😂

@TutorialGenius 11 месяцев назад

No problem! Give me 200 bucks for a good impact and it'll be right off!

@juansanchez9343 4 месяца назад

Don't mess with the 19mm crank bolt, just go to a pawn shop get an electric 1/2 impact gun and buy a 19mm impact socket, you will thank your investment.

@TutorialGenius 4 месяца назад

Tell me you didn't watch the video, without saying: you didn't watch the video

@mg8718 4 месяца назад

Your impact gun is worthless

@TutorialGenius 4 месяца назад

It's not mine, but thank you! :) It's part of the build-up process to the cowboy method :) But imagine if it worked haha!

@user-hy3hx9dq8e 3 месяца назад

Do you need that specific socket to do the cowboy method

@TutorialGenius 3 месяца назад

I would.... I bet something thinner would just crack the socket and it might fly off and crack something. But if you're willing to give it a try, you might get lucky!