Honda Oil Filter 15400-PLM-A02 vs. Sakura Oil Filter C-1821 Oil Filter Cut Open Comparison

Подписаться 22 тыс.

Просмотров 7 тыс.

50% 1

Oil Filter Inspection.
Today we'll compare a Honda oil filter to a Sakura oil filter that a viewer sent me from Australia. Are these oil filters any good? Would you use them? Let's open them up and see what's inside!
Honda oil filter 15400-PLM-A02: www.amazon.com/Genuine-Honda-...
Welcome!
► Want to become part of a Great Story? Please consider donating to this Great Organization. Thank You and God Bless! www.shrinershospitalsforchild...
► Hope you like the video, Please don't forget to Like,👍 Subscribe, and Hit the Bell 🔔 to See Future Videos. Thanks for Watching 👀, and Keep on Wrenching 🔧. Take Care!
► Subscribe: / whipcitywrencher
► Follow on Facebook: Whipcitywren...
► Music: www.bensound.com/
►Disclaimer: This video is for entertainment purposes only. Any information and content contained in this video are for entertainment purposes only. I ( WhipCityWrencher) shall not be liable for any injury, damage, loss, or even death to any person or property resulting from watching this video. Duplicating anything in this video is doing so at your own risk.
Fram,
auto repair,
12-volt battery,
starter,
alternator,
radiator,
air condition,
tires,
wheels,
brakes,
rotors,
grille,
headlights,
blinkers,
hood,
Bondo,
fiberglass,
odometer,
mpg,
engine,
motor,
transmission,
transfer case,
oil,
fuel,
gas,
Chevy,
ford,
Chrysler,
truck,
car,
vehicle,
spark plug,
sensor,
antifreeze,
wipers,
bumper,
oil filter,
fuel filter,
welding,
welder,
tools,
tool,
harbor freight,
Walmart,
AutoZone,
advance auto parts,
rock auto,
Nissan,
Saturn,
Ford,
gear oil,
rear differential,
front differential,

Авто/Мото

Опубликовано:

7 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 114

@save16thave 10 месяцев назад

The foreign made filters can be better made because they can afford to be. The American factories have to pay American workers a decent wage so unfortunately they have to cut costs somewhere to compete with the foreign companies low prices. It's hard to compete with slave wages and child labor. Sure the foreign filters are cheap and look nice but you have to consider the human cost of deporting all our manufacturing over seas.

@arontesfay2520 10 месяцев назад

Maybe. I've seen several Made in USA filters that are better than imported filters and cheaper. But of course you also have the likes of these Honda filters that are also made here in the US but frankly terrible value for money.

@18_rabbit 9 месяцев назад

while u are alluding to some actual facts, that is not the case with most foreign made filters. There's no slave wages in places like China, S.Korea and even the cheaper countries ,and very rarely child labor. So those motifs and tropes are useless in trying to make your point which does have validity if u mean that we just cannot do it for reasonable money. But that also means that we american buyers are so imperceptive that we'll buy the inferior domestic product? Not the folks/buyers who know a bit about such things, that's for sure. But yeah, in past few yrs, many some reviewers and commenters have indeed mentioned that a lot of the M&H brands including Purolator have gone downhill, and perhaps even Wix, though i kinda doubt it for them. So, indeed, troubled times due to inflation mainly.

@PapiDoesIt 10 месяцев назад

We are a 4 Honda family and thanks to your videos we no longer use Honda filters. The fiber end caps were the deal breaker, but seeing that metal shard on the threads sealed the deal. My son and I went to Walmart and bought two cases of the SuperTech filters for the Hondas, since your videos show them to be pretty good filters with real metal end caps like nature intended.

@daewooparts 10 месяцев назад

Should try to get the actual Japanese built Honda filters, those are decent quality filters

@Mr.Thermistor7228 7 месяцев назад

For Honda go with denso filter# 150-2006.. very well made filter, metal end caps, thick can, great threads, he actually did a video on his channel just recently. It has replaced the a02 for me completely

@donwyoming1936 5 месяцев назад

The Japanese filters are currently made exactly the same as the US filters. Fiber board end caps and all. @@daewooparts

@johnmano1439 3 месяца назад

Personally, I prefer Mahle or Mann-Filter on my Hondas.

@Resistculturaldecline 20 дней назад

The end cap material is irrelevant

@WhipCityWrencher 10 месяцев назад

► Thanks For Watching! I try and make an oil filter inspection video every Friday on this RU-vid Channel, Thank You! 👍

@randie450 6 месяцев назад

I think the microscope pictures tell you everything that's important here. It would be Honda for me.

@cajunweatherman8974 10 месяцев назад

The Honda filter is just the 4 dollar Fram orange can of death painted blue and labled Genuine Honda. Personally I use the Purolator Boss and Pennzoil ultra platinum in my 2018 Civic that my daughter drives. The Honda Dealerships are using cheap oil and cheap filters as part of planned obscelesance in my opinion. Do yourself a favor and change the oil and filter yourself. Otherwise you may end up with foreign metal debris in your engine as Pete did a great job of pointing out.

@WhipCityWrencher 10 месяцев назад

Thanks, cajun👍

@theodorgiosan2570 10 месяцев назад

I used to special order Sakura filters for my old JDM Nissan Gloria with the RD28 diesel engine. Was cheaper than paying $38 each for the Carquest filters that fit the CD17 in the diesel Sentras we got in the US, which is interchangeable with the RD28 filter. That was a combination filter with a full flow and bypass in the same can. Sold that car to my friend and was eventually totalled in a crash. He replaced it with a 1982 Oldsmobile Toronado 5.7 diesel. Which is still hard to find the large filters for (PH25/PG33), but not as hard as that RD28. He was originally planning on swapping a 5.7 into the Gloria due to the engine being on its last legs but then someone crashed into him and the car was done. So he just got a car with that engine already in it, and it's quite a bit nicer of a car.

@elmofrazier3481 9 месяцев назад

I'm glad you do the microscope pictures

@WhipCityWrencher 9 месяцев назад

Thanks! I'm glad you like them👍

@boskiles2369 10 месяцев назад

Happy Friday great info 👍

@ginog5037 7 месяцев назад

Thanks Pete, I now throughly check all my filters before installing them...

@WhipCityWrencher 7 месяцев назад

You're Welcome

@freedomliberty7611 10 месяцев назад

Great job Pete

@jensenwilliam5434 10 месяцев назад

Thank you for your videos!!!

@WhipCityWrencher 10 месяцев назад

You are so welcome!

@ED-ti5tc 10 месяцев назад

You done got my curiosity up on that honda filter. Ive been using that filter on my mom's honda civic since new. 2002. Also i only buy from honda dealer. I have on i haven't used yet and it has 4 threads and a different bypass valve in bottom. Ill check end caps on it. Great video. Have a good weekend.

@WhipCityWrencher 10 месяцев назад

Thanks, and have a good weekend also👍

@JenniferatHome 10 месяцев назад

This was great! I’ve never seen anyone disassemble an oil filter. Pretty cool that you measured the thickness as well! Who would have thought about the differences! 😁👏👏👏 Great video, great comparisons!

@WhipCityWrencher 10 месяцев назад

Thank You👍 Glad you liked the video😊

@GT-mn3bx 10 месяцев назад

@@WhipCityWrencherI have a filter for you you haven't done.. Where do I send?

@WhipCityWrencher 10 месяцев назад

@@GT-mn3bx Send me an email and let me know what you have to, Poker4me007@gmail.com

@GT-mn3bx 10 месяцев назад

@@WhipCityWrencherJust emailed you about the Wix.

@daewooparts 10 месяцев назад

That USA Honda filter is just a Honeywell/FRAM design built filter ,should try one of the actual Japanese Honda filters ! The Sakura is a Indonesia built OE Japanese design filter used by several domestic Japanese companies, I probably pick the Sakura over a orange can of death FRAM just painted blue 😁,those thread shavings are a sure death or severe damage if unfiltered & they are on the end to end up back in the crankcase

@SimpleTastyFood2024 10 месяцев назад

Good caught with the threads Pete! Good sharing as usual. 👍 Have a good weekend! Merri :)

@WhipCityWrencher 10 месяцев назад

Thanks, Merri👍 Have a Good Weekend also😊

@softwaresignals 5 дней назад

Fiber end caps don't fall apart in use. Looks like they would! All the ones over the years I've seen cut open, not a one was apart. So they are actually good.

@ellalamont6943 10 месяцев назад

YaY to Paul! So nice of him! Another great comparison! Thumbs up to You, Cuz! See You at the Jack and Jill tonight! 👍😊

@WhipCityWrencher 10 месяцев назад

👍 to Paul, Yep, see you there, it should be fun😊👍

@ellalamont6943 10 месяцев назад

@@WhipCityWrencher 👍😊

@anggaakihiko8001 5 месяцев назад

Sakura❤

@JenniferatHome 10 месяцев назад

I shared this to a friend with a Honda. 😁👍

@WhipCityWrencher 10 месяцев назад

Thank You😊👍

@jamescaron6465 10 месяцев назад

Great Job Pete. I've learned plenty about filters, thanks to you, though alot of it isn't exactly great. Funny, I run my finger with a little oil over the threads I guess as a habit before I spin it on. That burr probably would have stabbed me in the finger. I have to say that the Sakura filter is beautifully made but they need a better media than the low grade cellulose media they are using. I wouldn't use a Honda filter if you gave it to me and the burred threads just seal that opinion. the foreign filters seem to be much better made in recent years.

@WhipCityWrencher 10 месяцев назад

Thanks, Jim

@kellybennett2900 10 месяцев назад

Nice video Whip. Now that was what I would call a learning lesson. Personally I would go with the Sakura filter over the Honda filter.

@WhipCityWrencher 10 месяцев назад

Thank You👍

@jagmeetsingh7796 Месяц назад

Kellybennett 👋 Hi

@nathanielcasas8923 6 месяцев назад

You should do a video comparing the two different Honda filters that we can get here in the USA 15400-plm-A02 and the 15400-RTA-003 I would be interested to see them under the microscope to see which one might filter better

@ajmedeiros77 10 месяцев назад

Made in Indonesia for the win. Funny, I’ve had Hondas since the 90’s and all went well over 200k some over 300k and all still ram perfect. Many of them I had the oil changed at Honda because they had cheap coupons for the oil change, and washed and vacuumed the car. Likely it was because I always changed the oil early.

@ChuiStrong Месяц назад

The burrs on the Honda threads are definitely the manufacture's fault. That big of a burr would not fly in standard QCs. Someone in charge of OQC missed this completely. You're not the only one to see this on the US made Honda filters.

@faxmen09 10 месяцев назад

I 'prefer' the construction of the Sakura to the A02. Like the metal endcaps and much prefer how the baseplate threads are recessed vs protruding on the Honda. In my experience, the Sakura more installation friendly. Neither filter has efficiency specs, but what's known about the A02, not very efficient. It does use a stamped leaf "spring", and contrary to a previous bogus comment, it does serve the purpose as a "spring". I'm thinking both cellulose media, maybe Honda is a blend at most. I wouldn't pay $10+ for the A02, and seeing no efficiency spec for Sakura, I likely wouldn't use either. I agree the black adbv is nitrile, but if you still have filter, burn test would be neat. Thanks for vid.

@WhipCityWrencher 10 месяцев назад

Thanks faxmen09. I still have the filter, I'll try and do that test soon.

@faxmen09 10 месяцев назад

@@WhipCityWrencher Good deal. Only the Toyota Thai Denso black adbv has tested as silicone. Just curious if there might be another out there. But yeah, thinking it's nitrile.

@timbur2711 10 месяцев назад

Everyone one has the fiber fear when they see those end caps lol

@ChristopherRaskett-ql7qb 8 месяцев назад

Yea, I noticed the burs on the Honda filters. Several of them. I bought 1/2 case from Amazon. I bought one from Walmart, and when trying to put it on. I noticed that it didn’t catch the threads easily right away. I didn’t think to look for a ber on the threads as I never saw that before over 32 years of changing my own oil. Quite disappointing. I’ll know to check now though. I did notice that when I change from Fram filters to OEM filters for my CRV start up rattle significantly decreased. Must have better flow then the Fram extra guard.

@WhipCityWrencher 8 месяцев назад

Thanks for Sharing👍

@Tbjahuwbj 10 месяцев назад

Would not use the 2

@packerman1203 Месяц назад

Have you compared these oem filters to spoon performance filters? All the filters ive gotten from honda dealers have been much cheaper, about 6.75 a piece the last time i got them. The spoon filters are 25$ on their website, id be curious to see if anything is different about them. Might also be worth mentioning that ive never had any thread issues on the filters ive gotten but even on one filter thats not a good sign at all.

@HanksArt 10 месяцев назад

Amazing❤️😂💋keep it up

@WhipCityWrencher 10 месяцев назад

Thanks 😊

@davidsacco4860 10 месяцев назад

That Honda filter looks a lot like a higher grade Fram filter with the fiber end caps. Nice construction on the Sakura filter but I would not use it due to the porous filter media. This Sakura filter looks similar to a "Sure" filter which is also made in Indonesia. Also Sakura is or was a Japanese company that used to make photographic film and paper. It was called SakuraColor film. Not sure if it is the same company. . It might be because it made photgraphic paper so maybe they moved over to making filter paper.

@anishchand4420 10 месяцев назад

This One was a Close call between OEM Honda Filter that's Made in USA vs Sakura Filter that's Made in Indonesia and sold in Australia. Honda Loyalist try them both if possible. Supercheap Auto usually sells Sakura products and they may mail it to USA, possibly.

@7s29 10 месяцев назад

I use the Sakura on my old Mazda, I'm happy with them. Personally, I'll stick with Sakura.

@dennywires 10 месяцев назад

Shame the Honda filter doesn’t have better Q/C with those poor threads. Other than that I like the Fram design. It’s tried and true. Thanks for sharing Pete.

@WhipCityWrencher 10 месяцев назад

You're Welcome Dennis and Thanks👍

@brianchudzik7829 10 месяцев назад

Honda appears to be Fram? I will certainly change what I am using on my Integra now. Wix or NAPA for the win.

@faxmen09 10 месяцев назад

The Honda A02 shown been Fram made for a long time.

@Haffschlappe Месяц назад

Please test USSR oilfilters

@davidsacco4860 10 месяцев назад

The Honda filter looks a lot like a higher grade Fram filter with the fiber end caps. The construction of the Sakura filter is very good but I would not use it due to the porous filter media. The Sakura filter looks a lot like a "Sure" filter which is also made in Indonesia. I wonder if the Sakura filter is made by the same Japanese company that used to make photographic film and paper. It was called "SakuraColor. Not sure if it is the same company but if it is maybe they make filter media since they made photographic paper.

@JimFixIt74 10 месяцев назад

👍

@PennywiseM3 10 месяцев назад

Can you compare the Denso 150-2006 against the Honda 15400-PLM-A02? They both fit a variety of Honda and Acura vehicles. I am curious to see the Denso quality against Honda's quality. Denso seems to be Toyota's go-to supplier.

@WhipCityWrencher 10 месяцев назад

I'll put it on my to-do list

@aaronatwood9298 10 месяцев назад

Honda looks like a fram. If you were to put the other media in the “Sf” can using the sf hardware, youd have a filter. The burs on the threads is bad qc and worn tooling.

@mikman7219 Месяц назад

Sakura has been tested by Russian enthusiasts. They found that it had low filtering efficiency. Not the worst though but not what you expect from an oil filter. Most aftermarket filters are terrible anyway. Just be careful if you buy a non-OEM filter.

@bigdavedayday1581 10 месяцев назад

Sakura filter wins

@jeffkortsch8276 10 месяцев назад

The Honda filter looks like a Honeywell/Fram product very similar to the Subaru filters made in the US. The Sakura that is made in Indonesia looks like the Tokyo Roki filters made in Indonesia for Subaru including the little cup that the coil spring (my preference) fits into and the four rivets that attach the bypass valve.

@faxmen09 10 месяцев назад

Fram, yes. Honeywell, no. Honeywell sold Fram to Rank Group in 2011. Rank then sold Fram to Trico (now called First Brands) 2019. Amazon and many Honda parts sites still incorrectly identify the Fram as Honeywell more than a decade later.

@daewooparts 10 месяцев назад

@@faxmen09yup.,Honeywell sold it long ago, but everyone at Honda still calls them the Honeywell Honda filters, they tried to avoid using the FRAM brand as being a Honda filter long ago & they say "Honeywell " it just grew on everyone at Honda dealerships

@faxmen09 10 месяцев назад

@@daewooparts Really, the Honda A02 sellers don't have to list any manufacturer at all. ACDelco, made by Champ Labs now part of First Brands doesn't. Ford Motorcraft doesn't. Even the Fram made Subaru OEM doesn't. Other than not updating the listing information, unclear to me why sellers still list Honeywell for A02. At this point, it could be considered false advertising, imo.

@jeffkortsch8276 10 месяцев назад

@@faxmen09 I stand corrected. Still a poorly made filter no matter who owns Fram.

@faxmen09 10 месяцев назад

@@jeffkortsch8276 Over the years I've owned several Hondas, still do. Only run the A02 when I let the dealer do the oil change. That, very rarely over decades. I'm not a fan of fiber endcaps, but more so the ridiculous price the stealerships want for it. Many cars running Frams and seem to do fine. Still, prefer a more substantial looking filter with metal endcaps. If you're willing to spend $13, the new Fram Endurance is a good filter.

@cskiles318 10 месяцев назад

Hey friend

@Bill-tz1fr 5 месяцев назад

The inside of that honda filter sure looks a lot like a orange can fram to me.

@WhipCityWrencher 5 месяцев назад

Yep, it's made by First Brand who also makes Fram oil filters.

@scottymoondogjakubin4766 10 месяцев назад

Worst case scenario the honda filter wont even thread and if it cross threads the filter mount on the engine block that would suck cause most are part of the block !

@Jason-gj1pu 2 месяца назад

Hmmm ,fram restamp or japanese pretender champion from Indonesia.?? Well maybe fleetguard or mann.

@dwheeler016 10 месяцев назад

Disappointed in the Honda filter. The metal on the thread and was not caught. Paper endcaps, paper media. I expected better.

@Iowa599 10 месяцев назад

The A02 was introduced it seemed to be lower quality than the A01. A01 = built by Toyo Roki A02 = built by Honeywell But they're both better than FRAM!

@WhipCityWrencher 10 месяцев назад

This Honda oil filter looks like a Fram to me, even uses the same date code deciphering as a Fram oil filter.

@Iowa599 10 месяцев назад

@@WhipCityWrencher the A02, right? Apparently Honeywell is owned by the same group (Trico), but I don't know that Fram filters are the same. As a technician (Honda & independent) I saw Fram filters regularly, and they looked nothing like the A01 or A02, because no P-ring & I believe they were a different size. I never measured them (I had no reason to) but they felt different.

@faxmen09 10 месяцев назад

@@Iowa599 the A02 shown is made by Fram to Honda specs, has been for a long time. Fram hasn't been owned by Honeywell since 2011. Still Fram made though.

@WhipCityWrencher 10 месяцев назад

@@Iowa599 Yes, the A02

@joerahn1121 Месяц назад

Paper end caps want rust when held in a shiping contaner for 5 years

@FMichael1970 8 месяцев назад

Sad to see Honda oem quality has taken a nose dive.

@mutantryeff 10 месяцев назад

!!!

@dfields9511 2 месяца назад

A02 Honda filters are really made by Fram 😢 I hate when they don’t have metal Endcaps

@mikman7219 Месяц назад

Doesn't the fact that they never fail outweigh any personal preferences?

@yunusaprilyadi8828 2 месяца назад

Because both made in same factory

@riceburner4747 10 месяцев назад

I think its quality control, or lack of one, with Honda. I lean toward Sakura, better quality in my opinion. Even though filter itself is lesser of the two.👍

@dogisluvdogluvs8572 10 месяцев назад

Honda charges only 6.63 for filters 12 dollars is price gouging.

@Iowa599 10 месяцев назад

Honda filters have a "P-ring", not an O-ring, & it looks like that Sakura filter is the same.

@WhipCityWrencher 10 месяцев назад

Close enough, call it what you want P'ring, O'ring, gasket, oil seal.

@faxmen09 10 месяцев назад

@@WhipCityWrencher Agreed. It's an o-ring with a little extension to fit under a base plate flange to hold it.

@tariqbhatti6584 10 месяцев назад

Worker’s fault on the Honda threads, it should’ve failed inspection, but I use the Honda Filters they are good filters.

@spankyham9607 8 месяцев назад

The Honda filter looks like clearly a CHAMP made filter. I think, in this case, the Sakura is the better filter.

@WhipCityWrencher 8 месяцев назад

I think it's made by First Brands

@Gary7even 10 месяцев назад

Sakura is a much better-made filter. I personally would not use either of these.

@elcano9l52 2 месяца назад

And what would you use then?

@Jason-gj1pu 2 месяца назад

Fleetguard or mann. @@elcano9l52

@Andrew__Smith 10 месяцев назад

You can wrap your sh@t ( Cheap *FRAM* ) up in all sorts of wrappings (HONDA/SUBARU/ etc) , and that sh@t ain’t gonna be candy. As for the filter from Indonesia - in RU-vid tons of videos like dirty teenagers in some dirty basements, by hand, in dust and dirt make such filters. At the same time, literally run between their legs dirty, homeless dogs. The spectacle is terrible.

@jimcrow8562 10 месяцев назад

In case you're wondering where Sakura filters are really made: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Azkdwjk6vr4.htmlsi=pGEVX-VKO6QSlPhg That looks like a pretty modern factory to me. Those videos of oil filters being handmade by "dirty teenagers in some dirty basement" were actually shot in Pakistani sweatshops that have scant regard for workplace safety and employ child labor. The filters made there are mostly intended for the South Asian, Australasian and African markets.

@WhipCityWrencher 10 месяцев назад

@@jimcrow8562 Thank You great video👍