Honda PCX 150 CBS Brake Fluid Change | Mitch's Scooter Stuff

Подписаться 108 тыс.

Просмотров 46 тыс.

50% 1

CBS = Combined Brake System. In this video I am going to show you how to change CBS's brake fluid on up to 2017 Honda PCX 150 scooter. Subscribe and help me break 100K subscribers! bit.ly/MitchsScooterStuffSub
*** Tools I used in this video:
Ratchet 1/4 drive - amzn.to/2xcJEu1
8mm socket 1/4 drive - amzn.to/2xMhsBl
Phillips #2 screwdriver - amzn.to/2fgdZDL
8mm wrench - amzn.to/2HCiC48
Brake fluid DOT 4 - amzn.to/2GEIHzH
Syringe 100cc with tube - amzn.to/2G951U2
3/16” clear tubing - amzn.to/2FrdLST
Plastic pry tool - amzn.to/3aQrSSz
Towel
Shop Mitch's Scooter Stuff Logo Merchandise
HERE: bit.ly/MSSteespring
and HERE: bit.ly/MSSspreadshop
Want more free Scooter Tip / Tutorial videos - Help support this channel!
Paypal donation: bit.ly/PayPalMitchsScooterStuff
** Help translate my videos to your language HERE **
bit.ly/ADDYOURLANGUAGE
** Shop all the scooter tools and gear I use HERE **
bit.ly/MitchsScooterStuffSHOP
Follow Mitch's Scooter Stuff:
Website - bit.ly/Scooteronly
Instagram - bit.ly/2fB8gay
Facebook - bit.ly/2gEsYpt
My other RU-vid channel - bit.ly/2g4i5d5
Filmed by Mitch Bergsma
Edited on Final Cut Pro X on Mac
Scooter Intro edit by Erik Lauritzen
Check out his websites: bit.ly/2gQe8d4
#MitchsScooterStuffHondaPCX150 #MitchsScooterStuff #MicBergsma
Like the music? Check out this great library for RU-vid videos here:
bit.ly/MICTUNES (try it for FREE!)
******************************************************
IMPORTANT
Please only use and share this embed code of the original video.
Third party downloads and distribution is not permitted.
If you are interested in buying footage or for booking information please contact: hire.micbergsma@gmail.com
******************************************************
SCOOTER TUTORIAL VIDEO PLAYLISTS:
Genuine Buddy 125 - bit.ly/2g4h19b
Honda Elite 50 - bit.ly/2g4hMPr
Honda Elite 80 - bit.ly/Elite80
Honda Elite 250 - bit.ly/2fK0uGg
Honda PCX 150 2013-2017 - bit.ly/MitchPCX150
Honda Reflex 250 - bit.ly/2DV4C7i
Honda Ruckus 50 - bit.ly/2u8pNhP
Piaggio Fly 150 2013+ - bit.ly/2gHSXJ5
Piaggio Fly 150 (pre 2013) - bit.ly/2fB7mdS
Piaggio MP3 - bit.ly/2ggSLRf
Suzuki Burgman 400 2007-2016 - bit.ly/2gHMP3D
Suzuki Burgman 400 2003-2006 - bit.ly/2gHTSsR
Suzuki Burgman 650 - bit.ly/2gvEsIX
Vespa LX 50/150 - bit.ly/VespaLXscooter
Vespa GTS / GTV 250 / 300 - bit.ly/VespaGTSscooter
Yamaha Zuma 50 2002-2011 - bit.ly/2gIazoY
Yamaha Vino 125 - bit.ly/2fJXFoU
Yamaha Zuma 125 - bit.ly/Zuma125cc
******************************************************
About Mitch's Scooter Stuff:
This channel is all about scooters! Tutorials, How to, DIY Maintenance, Reviews, Mods, Vlogs, Just for Fun, and more!
Honda PCX CBS Brake Fluid Change | Mitch's Scooter Stuff
• Honda PCX 150 CBS Brak...
Mitch's Scooter Stuff
/ mitchsscooterstuff

Авто/Мото

Опубликовано:

30 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 69

@MitchsScooterStuff 3 года назад

*** Tools I used in this video: Ratchet 1/4 drive - amzn.to/2xcJEu1 8mm socket 1/4 drive - amzn.to/2xMhsBl Phillips #2 screwdriver - amzn.to/2fgdZDL 8mm wrench - amzn.to/2HCiC48 Brake fluid DOT 4 - amzn.to/2GEIHzH Syringe 100cc with tube - amzn.to/2G951U2 3/16” clear tubing - amzn.to/2FrdLST Plastic pry tool - amzn.to/3aQrSSz Towel

@georgekountouris8059 2 года назад

Thank you for your great videos Mitch. All of them are so great. You can help every motorcycle owner knowing their vehicle better and deal with emergency situation. Simple maintenance and repair of certain parts of the motorcycle can save lifes and money. I am an owner of Honda Pcx 125 of 2017 and I am very satisfied with it. Totally a value of money. I am very glad to see you have a pcx in your squad. I anticipate for more pcx video. I am also very relieved to know that if something goes bad on my pcx I have reliable Mitch for help. Continue this nice job. Wish you the best. Greetings from Greece.

@bengthammarberg4603 3 года назад

I really like your very informative SILENT videos. I wish more people should follow your example instead of making their mouth do the work. Please, continue this easy to follow videos👍

@MitchsScooterStuff 3 года назад

I appreciate that!

@marwan_ibrahim1995 2 года назад

Great job, I hope to post more videos on the PCX scooter

@OCANALDOMARKITO 3 года назад

as always fantastic tutorial thanks for helping me GOD BLESS YOU

@MitchsScooterStuff 3 года назад

My pleasure 😊

@Conelite00 3 года назад

Very Cool. Learn something new everyday. I forget these bikes have such a weird Braking system.

@MitchsScooterStuff 3 года назад

😄👍🏼👍🏼

@staninjapan07 3 месяца назад

Thank you. About to do a full brake overhaul, and that means accessing this reservoir to change fluid at the least - may have to adjust the combi-front-rear mechanism too, and perhaps change the CBS master cylinder. Seems you may have skipped a couple of the "proper" or "official" steps in getting the panels off, but clearly you did so without issues. I think the official way includes removal of the instrument panel, but I think I will do it this way first.

@zeque1 2 года назад

muy bien todas tus explicaciones

@allskoolguru 2 года назад

oh jeez mine is super way due for changing 2015 - 2022! lol thanks for the video. just wondering how many ml is needed for the CBS oil change?

@mcm2418 2 года назад

You're the man Mitch 🤙🏽

@agustinenrich1069 Год назад

Your videos are really helpful, I got a PCX 125 model 2011 and the storage under the seat stop working and it's stuck, has someone had the same problem anytime? Any idea if it's an electrical problem or its just a mechanical switch?

@ervankurniawan4932 Год назад

Nice job

@remembergodisalwayswithyou6862 3 года назад

We need more people with you in the world nice job bro love you from Morocco God bless you ❤

@MitchsScooterStuff 3 года назад

🙏🏼🙏🏼

@remembergodisalwayswithyou6862 3 года назад

@@MitchsScooterStuff you're very welcome I hope you have a amazing day

@user-uw5qf2le5v 9 месяцев назад

Good jab!❤

@okanpelit Год назад

Thank you for making the video of the CBS brake fluid change. This is the video i was looking for for a long time. I will also change the cbs oil for mine pcx. I have a little youtube channel. I repair my own pcx and shoot videos as an amateur in TurkiyeI followed your channel to learn more. I would appreciate it if you would take a look at the videos I shot and support me.

@marrellivieira9961 10 месяцев назад

Thanks alot

@handlebarmonkeymotoadventu4664 2 года назад

At first I was like "why is he pumping the rear brake to bleed the front?" but then I was like "ohhhh, Combined Braking System". Another good video.

@MitchsScooterStuff 2 года назад

😆 yeah it’s little weird design , thank you

@joelsloper530 9 месяцев назад

Mine was not bleeding and I had a thought if the brake is adjusted right and tight you cannot bleed Shure enough I slacked the back cable all the way out and guess what it started to bleed just thought I'd mention it if others have the same issue

@Kryton002 2 года назад

Hi, which model year is the pcx on video? Because im going to replace breaking fluid and im owner of PCX 2016. Is the same process? Thank a lot.

@natarajaniyer2443 10 месяцев назад

Mitch - can you show how to clean the "Crankcase Breather" on a PCX ?

@ankimthai821 Год назад

Is it important to change or add brake oil to the cbs system? Mine is empty but brake normally i asked because on 2018 model I don't know how to remove the body frame.

@JoseABPhoto 3 года назад

Thank you very much!! ;)

@MitchsScooterStuff 3 года назад

You're welcome!

@maxmigdal7829 2 года назад

What kind of differences would there be for a PCX with ABS breaking? That is the model I have and can't seem to find any videos on that specifically. Thanks!

@MitchsScooterStuff 2 года назад

Hey, I don’t think you have to do anything about ABS… it’s just a wire going down near the axle… can do normal brake fluid change like in this video with ABS

@joelsloper530 9 месяцев назад

Is this like a link brake ?

@barneykennett9282 3 года назад

Nice...👍.

@MitchsScooterStuff 3 года назад

Thanks for the visit

@josephianmananita3972 2 года назад

saan kaya mkkaka bili nang vombi brake pump nang pcx boss? ilala ko sa honda click sana.

@staninjapan07 2 месяца назад

So I did the job like this... and broke three clips on each of the panels. You must have had practice at this shortcut way of removing them. I am leaving mine off... ...Mine is a 100,000 kilometer work-and-back bike, so no worries on that score. But I note that after dismantling both the calliper and front master cylinder and replacing the seals and master cylinder piston, it took one hell of a long time to refill the dry system by hand pumping the brakes levers. And the brakes feel as tough the job is still incomplete. The front brake is too soft / less effective (though smoother) than before. Also, to my disappointment, I now have a rear brake lever that stops, abruptly, half what through its travel, with a contact noise... it sounds as though one component near the combi brake assembly hits another component, abruptly stopping the lever. I am not suggesting that's due to following this video. It's a heads-up for other DIY maintenance riders. Perhaps a vacuum-bleed will give a better result... another 3,000 yen (30-40 dollars).

@RussellHogan 3 года назад

Hi Mitch. Do you think 37,000 miles on a 2014 Honda Forza is too much? I saw one for sale.

@MitchsScooterStuff 3 года назад

Not that bad... just check to make sure the seller have maintenance records... I have burgman 400 with 60,000 miles on it with no problems on keep up with maintenance. Forza is awesome!

@RussellHogan 3 года назад

@@MitchsScooterStuff Awesome! Thank you for your feedback. :-)

@raresd8916 2 года назад

I can make this at a honds pcx 125?

@ncwarrior62 3 года назад

Another great Video Mitch ! I hope you are enjoying Island life. How are the waves there? Caught any good swell? Have you ever thought about making some local hot spot surf videos? I watch Ben Gravey a lot ! On you tube! Check him out pretty decent guy!

@MitchsScooterStuff 3 года назад

Thank you! Yes I do, currently in California filming / working on my 1967 VW bus restoration I post restoration series on my other channel MicBergsma 😄🤙🏼 waves in Maui is good, i do sup surfing mostly, haven’t surfed for a long time so I like stand up one better haha... yes good waves on south, west and north depends on swells, I wanted to make a video about hot spots but I just respect locals, they would hate me if I do that 😬 that’s small world about Ben gravy! I know him personally, we hung out back in 2017 in Florida 😄

@ncwarrior62 3 года назад

Awesome Mitch! I am handicapped I live on Southern Outerbanks of North Carolina ! Surfing was big part of my life I ride swell behind my boats longboards. I am buying a new SUP this summer an inflatable type for easy transport! Thinking of putting electric motor to help with the strong tides and currents here! The inlets get very rough here I am not strong enough to paddle against the winds and tide. My neck has been broken 3 times my thoracic vertebrae all of them broken in 2014 car wreck. And lumbar discs bulging. Plus being on Hemodialysis 3 x a week 5 hours at a time. I will check your other channel out. My first car was a 64 beetle with a 65 engine I drove the wheels off of it for years. I want a VW 60’s work truck! Take Care

@samgrassi6543 3 года назад

Mitch. Great videos as always. I have a question tho re my 2013 Mp3 500 sport that I'm at a loss with. At low and high speeds moving normally the bike jumps a little then just dies. All electrics are lost and I need to jump start the bike again to get going. This doesn't happen all the time and I can't find the source of the issue. Any help would be grand. Stay safe bud.

@MitchsScooterStuff 3 года назад

Thank you Sam, is the battery new? New spark plugs?

@ramazanbuyukarslan 10 месяцев назад

Hello Sir Honda pcx EURO 5CRANK SIGNAL LEARNING ? How to do it, I would like to shoot a video as an application, please.

@joelsloper530 9 месяцев назад

I thought the left brake was just cable I saw the reservoir and it was bone dry like it was never filled from factory?

@arturslapsa6794 2 года назад

Hi, Mitch! I have a Piaggio fly 125, 2013 year. Everything worked great and one day just doesn't work anymore, can't start. candle spark gives, gasoline arrives, air filter new. I'm desperate for it so suddenly, the battery is new. help please

@juliandiecast 2 года назад

Check valve clearance, if gaps are closed then it wont have compression and thus wont start

@georgerenolds859 3 года назад

what brake levers are those ?

@MitchsScooterStuff 3 года назад

I am not sure, I will ask the owner

@mjoa1 2 года назад

I have the saem ones on my PCX. Search ebay for "adjustable motorcycle brake lever" and you should find multiple sources all selling the same thing, and they fit multiple bikes. Been using mine for about 3 years now with no problems.

@martind349 3 года назад

I brush a little transmission fluid on the connection clasps to make panels pop out more easily the next time around. This courtesy hasn't inspired any of the mechanics who work on my bike to put panel pins in a little container so they can reassemble them correctly when through. I dislike the idea that they can't keep track of small material objects. Perhaps I simply live in a fuckwad part if the country. By the way, you are too wholesome a person for me to post the word fuckwad to your comments section without Yourube intervention. Congratulations.

@charlesseymour1482 Год назад

where

@Sparky-ov1ot 2 года назад

I think even I could manage that, well maybe!

@mjoa1 2 года назад

You can do it! I've been learning tons and doing lots on my bike but I have no experience really. I do have a decent tool kit though becuase every time I need something like this done, if I don't have the tools, I just go buy them as it's usually less than the labour I'd pay for getting it done at the shop... Then I have the tools I need for next time. Just a couple weeks ago I changed my back brake shoes thanks to one of Mitch's tutorials. Never done it before but it wasn't that hard once I got started. Just always go slow and you should be fine. Anyway, I'm about to go buy a couple feet of tubing and some brake fluid so I can also do this for the first time...

@mbpoccuu8232 2 года назад

Ahah it is much more easy just need to take off small plastic part near ignition

@Visionery1 2 года назад

4:32, I would've first sucked the old fluid out, rather than pump it through the system.

@phxrsx Год назад

I suppose you could do that yeah.

@elrinconderoller1560 3 года назад

This are only for PCX up to 2017, from 2018 until now only have brake fluid the front wheel, rear wheel works only whit Iron cable because works whit ABS. Please modify the title of video, thank you by PCX 2019 owner

@Oriolus1 2 года назад

I have pcx 2019 as well

@Rammer_Jammer Год назад

Not all 2019's have ABS...Mine is a 2019 & it has the CBS like this video shows...I just did mine.

@beakittelscherz5419 3 года назад

Hiding ecential service points on a vehicle is never a good design imo. Esp. with this much plastic clips to screw with. Might lookylooky good, but this is enough reason for me NOT to buy this scooter ... . Nice video ,well done&thumps up man ;-)

@MitchsScooterStuff 3 года назад

Yeah I feel ya, the design is crazy! Thank you for stopping by!