Honda Pressure Washer: [Honda GCV 160] [No Pressure, Low Pressure] Power Washer Repair (2019)

Подписаться 7 тыс.

Просмотров 418 тыс.

50% 1

Honda Pressure Washer unloader valve. Homelite pressure washer No Pressure Low Doesn't have Pressure Problem Honda GCV160 2700 PSI. In this video I address a common problem. Pressure washer no pressure. This is usually due to a stuck unloader valve.
If you need this part, you can find it here. rover.ebay.com/rover/1/711-53...
Subscribe to my channel ru-vid.com...
If you find that your Honda Pressure washer has no pressure or that your pressure washer has no pressure. You may want to check the unloader valve. One of the most common problems reported is that their power washer no pressure. Or that their power washer low pressure.
Watch this video to learn the process for addressing the pressure washer no pressure problem. You sill find it easy to fix the problem of no pressure by watching this video. The pressure washer in this video is a homelite pressure washer with a honda gcv 160 engine and a vertical axial pump. If you are experiencing low pressure on your pressure washer then it could be an issue with the inlet.
If your pump doesn't have pressure check the hose for kinks and make sure to get all of the air out of the hose and pressure washer.
Remove the unloader valve on your honda pressure washer and check to see that the small pin on the end of it moves freely. On the homelite pressure washer in the video the unloader valve is located directly beneath the pump outlet.
00:00 I hope to earn your subscription today
00:10 Honda Pressure Washer GCV 160
00:31 Honda Pressure Washer Unloader Valve
01:31 Honda Pressure Washer No Pressure Fix
03:00 Honda Pressure Washer Repaired
#smallenginenation
#HondaPressureWasher
#HondaGCV160

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 323

@bw538 4 месяца назад

Thanks!

@DIYAllied 4 месяца назад

OMG. Thank you so much.

@DerekEvans-zx7el 2 месяца назад

Took 5 minutes and worked right away. Saved me the hassle of trying to replace the whole pump. So simple! Thanks for posting.

@DIYAllied 2 месяца назад

Thanks for watching.

@briandemers7262 5 лет назад

Thanks, perfect. Left it in the garage for the winter. After watching other videos, thought the pump was toast. This fix worked, first shot, fired right up full pressure.

@DIYAllied 5 лет назад

Glad it helped you. Cheers.

@ZebulonsPi 5 лет назад

DUDE!!! I was literally online researching pump replacements for this model of pressure washer, as I had left it out in the New England winter in my shed without "treatment". Figured I had blown the pump but good. Saw your video and figured "what the hell, I cant screw it up and more than it already is..." and BAM, full pressure! Thank you SO much!!

@DIYAllied 5 лет назад

Wow. That's great! Thanks for commenting. It's always great to hear that I've helped someone out. Thanks Jason.

@1divemaster1 Год назад

I searched the internet and finally found you. You were a great help w your explanation.

@DIYAllied Год назад

Thank you. I'm glad to have helped.

@hassanedjibrilla75 5 месяцев назад

Thanks a lot, saved me 💰💰 and a trip to the repair shop , and headache, took me only 3 minutes to fix my Ryobi pressure washer with honda engine after watching this video, the only video on RU-vid that helped me in my situation. Thanks again

@DIYAllied 5 месяцев назад

Thank you so much. I am happy to have helped.

@jefftodd8341 2 года назад

Thank you so very much!! My neighbor actually just gave me this washer and I just did your fix and it works GREAT now!! What a day, free 3 year old pressure washer (he only used it twice!!) and a free fix!!

@DIYAllied 2 года назад

Thats great. Thank you for commenting.

@anthonytriolo3643 Год назад

A little grease or oil so you do not damage the o’ring🎉🎉🎉🎉🎉🎉🎉

@Billperry7 5 лет назад

Excellent first check when pressure is gone. Got it done in 10 minutes. Works great. Thanks for the tip.

@DIYAllied 5 лет назад

You are welcome.

@RKIVIDS 5 лет назад

THANK YOU! THANK YOU! THANK YOU! I was about ready to head to home depot to buy another one even though I've only used this pressure washer less than 5 times over the past years. It worked!

@DIYAllied 5 лет назад

Awesome.

@khalilsulaiman8451 5 лет назад

You are amazing sir!!! Just did this and it was sticking just a bit. We are back to full power!!!!

@DIYAllied 5 лет назад

You are welcome. Thanks for watching and commenting.

@TheFatPeguinBand 3 года назад

I scored a free pressure washer that had only been used a few times and had a stuck pressure Unloader! Thanks a lot brother!

@DIYAllied 3 года назад

That's awesome. Glad I could help. Thank you for commenting.

@peopler2stupid165 5 лет назад

GREAT VIDEO.. Thanks for taking the time to share your knowledge.. 🤓 From experience with other pressure washer Unloader Valves (UV), I have found that some can get extremely tight in the pump head.. After you remove the Staple / Clip, start the pressure washer and cycle the wand trigger a few times and the pressure will pop the UV right out.. It will pop out and fly 2-3 feet, aim it away from people and property you don’t want damaged.. I place a 5 gallon bucket on the side to catch them.) A pair of vise grips and a small slide hammer works on the really tight ones.. (Chlorinated or hard water is the enemy of a UV, they get stuck from mineral buildup as they dry out!!) ALWAYS check the O-Rings for cracks and then lube the UV with a SILICONE grease.. (Swimming pool type silicone O-Ring lube) Do NOT use petroleum based grease, it swells the O-Rings and makes more work for you if you need to clean the UV again in the future.. Also, when properly lubed the UV will slide right into the pump head without hammering on it and risking damage to the threads.. A light tap with a soft hammer or screwdriver handle works.. To simplify getting the staple fastener back in, grind / file the tips on the legs to a 45 degree angle and the wedge shape will slide in 200% easier than the original blunt end.. (Beveled side toward pump on install!!)

@DIYAllied 5 лет назад

Thanks for the tips. I really appreciate your comment. Good stuff sir.

@glock-hm3ro 4 года назад

I have a basically NEW / one year old unit that sat; now that UV is STUCK/corroded in place; I soaked it with AeroKroil Penetrating Oil tonight and will recheck it tomorrow using your tips to use unit pressure to help force valve out. That's slick; thanks a MILLION

@DIYAllied 4 года назад

You are welcome. Thanks for the comment.

@Mc88Flyy 3 года назад

My UV wasn't stuck and looks fine but i'm not getting any pressure. Do you think the UV internals could be bad?

@kitchenenterprise3787 Год назад

😎🔥🔥🔥✌🏾💪🏾💪🏾🎯🎯😁

@zorro2707 4 года назад

You just saved me the price of a new pump. Thank you so much!!!

@DIYAllied 4 года назад

You are welcome.

@devinmccloud 2 месяца назад

If you get no pressure and it sprays a stream of water without the pump engaging, check the filter first. It is located on the water intake. Mine was 1/2 inch deep plugged with calcium.

@chuckmc5437 Год назад

Add me to the list. I had no pressure at all. I came in to do a quick search before I pulled the pump off and found your video. I didn't realize I had left the water on so when I pulled the pin and started to use the screwdriver to help pull it out, it came flying out with the water pressure. Like yours, the pin had free movement when I picked it 30' away. I put it back in and all is well. Appreciate you sharing this information.

@Manof777 5 лет назад

Thanks, I took the part out cleaned and oiled it and worked the pin in and out several times and it begin working again after three years

@DIYAllied 5 лет назад

Awesome. Glad I could help

@brandonnicol2422 5 лет назад

Thank you so much !! Ours was stuck but wasn’t ruined pulled it put it back in and now there’s pressure !!

@DIYAllied 5 лет назад

You are welcome. Thanks for watching.

@studtulloss45 4 года назад

This fixed mine! Black max pressure washer with same Honda engine. Took the valve out, pushed it in to unfreeze it, and put it back in. Full pressure!

@DIYAllied 4 года назад

Awesome. Glad to hear it.

@shaneaucoin5557 3 года назад

Worked like a charm. Was a good end to a bad day. Was about to chunk it! Fixed it in 5 minutes.

@DIYAllied 3 года назад

Glad to hear your day ended better.

@josefarias9611 Год назад

After watching way to many videos to find a fix for my pressure waser not having pressure i found your video thank you

@DIYAllied Год назад

Thank you.

@seanp474 4 года назад

Fixed my dad's power washer. Thanks for the video.

@DIYAllied 4 года назад

You are welcome. I'm glad it helped you and your dad out.

@nickbenson5465 2 года назад

Oh my goodness! You just saved me getting a new power washer! Did what you showed and that was exactly the problem!

@DIYAllied 2 года назад

Awesome. Thanks for commenting.

@ronald5708 3 года назад

Thanks. Worked like a charm; although, it was a pain getting it back in.

@DIYAllied 3 года назад

You are welcome.

@Rickatspeedoflight 4 года назад

Thank you. My pressure is brand new. Never used. No pressure. Go figure. Your fix worked!

@DIYAllied 4 года назад

You're welcome

@tc2837 5 лет назад

My Honda Pressure washer had low pressure and the valve was stuck. Thanks to you my wife thinks I am a genius. AWESOME!

@DIYAllied 5 лет назад

That's awesome.

@kennybibbs720 3 года назад

Thanks! This worked on mine, I was about ready to pony up for a new one!

@DIYAllied 3 года назад

No problem. Thanks for commenting

@elliottcarey6961 4 года назад

just fixed my power washer thanks to your video!

@DIYAllied 4 года назад

I'm glad to hear that.

@Pete4875 2 года назад

WOW!!!!! THANK A MILLION! I took the valve out and it was fine but in the hole there was a ball bearing I took a punch and very gently kept tapping it and it came loose and now my machine works great!

@DIYAllied 2 года назад

Thats awesome. I'm glad to have helped. Thanks for commenting.

@matthewcooper8217 2 года назад

I think I might have scored something inside where ball bearing is at and now it just keeps building pressure..ugh! Fixed the problem only to create another one FML

@DIYAllied 2 года назад

@@matthewcooper8217 you may have accidentally tightened the nut down to far. The tighter that spring the more pressure it builds

@matthewcooper8217 2 года назад

I did not touch the nut..so I can loosen it some?

@Pete4875 2 года назад

@@matthewcooper8217 I always find that with something mechanical it's best to figure out how it works first before you try to fix it. I would take mine apart and try to figure it out but I'm out of town for quite a while. I doubt you scored something. Take it back apart and make sure the ball is free to move. If you could take it out that's even better. There's probably just some build up that needs to be cleaned.

@philliphall5198 Год назад

Thank you for information and advice I store mine with RV antifreeze to keep it from rusting and lube orings

@DIYAllied Год назад

Thank you for commenting.

@georgehrubec8542 5 лет назад

Thank you. Thank you. That was my issue. You saved me $ and time getting it repaired. Again. Thanks!!!

@DIYAllied 5 лет назад

No problem. Thanks for watching.

@luiscarrillo261 3 года назад

@@DIYAllied what is the mame of that part

@JosephNicolosi1 6 лет назад

Thank you! this fixed mine, it was stuck in.

@DIYAllied 6 лет назад

Joseph Nicolosi You are welcome. I'm glad it helped.

@jeffg4284 4 года назад

Outstanding! Mine was stuck just like you said. Thanks!

@DIYAllied 4 года назад

Thank you and you are welcome

@BlackHillsDave 2 года назад

Thank you so much for making this video! Fix works GREAT!

@DIYAllied 2 года назад

Thank you.

@slightlyasian 3 года назад

Sometimes it takes a whole day finding videos and watching them to fix a problem. I got lucky and got this dude on my 2nd video. WD40 all up inside there

@DIYAllied 3 года назад

Thank you for commenting.

@slightlyasian 3 года назад

@lowprofile2412 3 года назад

Thank you so much. This happened to me a couple of years ago but I’ll be dammed if I could remember what it took to fix it AGAIN. Works every time 👍

@DIYAllied 3 года назад

I'm glad to have helped. Thanks for commenting.

@lowprofile2412 3 года назад

@@DIYAllied Hey no problem. You’ve got a great channel, keep up the good work

@DIYAllied 3 года назад

I really appriciate that. Thanks.

@patrickjoyce2276 6 лет назад

Thanks for an informative video. I got my Homelite pressure washer back online with some penetrating oil and your video.

@DIYAllied 6 лет назад

That's awesome. I'm glad to hear that.

@richardfabrizio8998 5 лет назад

Great angle to view repair. Awesome thanks. I just subscribed

@DIYAllied 5 лет назад

Thank you. I'm glad it helped. Thanks for subscribing.

@catskillyeti2405 2 года назад

Thank you!! Go old RU-vid coming through in the clutch again thank you sir!!!

@DIYAllied 2 года назад

Right on. Thanks for the comment.

@stephenlaw7018 3 года назад

Thanks for this! Your video keeps giving!

@DIYAllied 3 года назад

Thank you. Have a great day.

@Ifp154 2 года назад

Just what I needed. Thanks!

@DIYAllied 2 года назад

No problem.

@Frock1999 4 года назад

Thanks. That fixed my Honda 190.

@DIYAllied 4 года назад

No problem.

@randallhorn8285 Год назад

This did the trick for me. Thnx. I had a real difficult time getting the pressure valve out even when using the idea a fellow had for taking the horseshoe pin out and exercising the wand a few times. A buddy up the street, who is a known handy man, came up with an idea that worked well. We pulled off the spring, washer and nut. Then we put a few washers over the threaded pin that were pretty big and fit nicely over the pressure valve housing. Then we found a nut that had the same thread pattern but was fairly large and started to cinch it down on top of the big washer. The effect was the same as pulling back on the valve. It didn't come out easily, but it finally gave up. Cleaned the valve and the housing area, reassembled the system and she ran great.

@DIYAllied Год назад

Thats awesome. Thanks for the tip on getting that valve out.

@Ebaybow Год назад

This pressure valve removal is a bear! Instead, use a 1/2" box wrench and another box wrench for leverage under the larger nut. No washers or spare parts are needed. 3 hammer taps later and the unloaded pin is out!

@sonny323 Год назад

@@DIYAlliedwhere can I get the ball bearing that goes in front of the unloader valve. I did all this before & forgot to put the pin back to hold the unloader valve in place. After I started the engine the ball bearing & unloader valve flew away & still can't find the bearing nowhere Please help.

@DIYAllied Год назад

@@sonny323 Thats part of what is called a chemical/soep injector. You can buy them on eBay i believe.

@sonny323 Год назад

@@DIYAllied how do I go about ordering the right part. I saw so many

@lonniethomas4343 3 года назад

You don't know how much I appreciate this. This fixed me right up and I'm back in business. Thanks a million.

@DIYAllied 3 года назад

You are very welcome. Thank you for the positive feedback.

@brianhughes4818 3 года назад

Fixed me up too. I was thinking it might end up being a expensive repair!!! Thanks a bunch my friend.

@DIYAllied 3 года назад

@@brianhughes4818 No problem sir. Im glad to have helped.

@raystarky3896 Месяц назад

Great video! very helpful hint. never knew about the pressure valve.

@Rick-O-Shay60 3 года назад

Thanks bud, Thought I was going to have to buy a pump.

@DIYAllied 3 года назад

No problem. Glad you got things worked out.

@scorsesefan91 8 месяцев назад

Thanks man! Saved me parts and time twice now.

@DIYAllied 8 месяцев назад

That's awesome. I'm glad to hear that. Thanks for commenting.

@JaneDoe-vv6xl 2 месяца назад

Thank you! This was exactly what I needed! Much appreciated.

@DIYAllied 2 месяца назад

Thank-you for watching.

@jason.lackey 3 года назад

Ding Ding Ding!!! We have a solution to my problem. Many thanks!!

@DIYAllied 3 года назад

You are very welcome. Thanks for commenting.

@johndornberger8356 2 года назад

Does anyone have a link to where I can buy this part? The eBay link in the video title narrative does not take me to the part for some reason. Thanks folks. And I agree with all of you, great video, saved us all from replacing our pumps or buying a new PW!

@shelleybr63 Год назад

I found them on Amazon

@davidR9410 Год назад

Awesome. This fixed my washer also. Thanks.

@DIYAllied Год назад

No problem. Thanks for commenting.

@DanielSanchez-kg1vd 3 года назад

I have a honda pressure washer with the same engine as the one in your video but I put it in run mode and it turns off whatever you think it is

@cz125zr 3 года назад

Thank you this video just saved me soo much aggravation

@DIYAllied 3 года назад

No problem. Im glad it helped you out. Thanks for commenting

@benstolie 5 лет назад

thanks for the information very helpful.

@DIYAllied 5 лет назад

You are welcome

@forresthoffman489 4 года назад

THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!! working great now such an easy fix!

@DIYAllied 4 года назад

You are welcome.

@anthonymoriglioni1792 4 года назад

All i can say is thanks... i just saved myself hundreds...

@DIYAllied 4 года назад

You are welcome. I'm glad I could help. Thank you for commenting.

@matthewsalvador9783 10 месяцев назад

I enjoyed that you used a hammer to tap the valve in and bottom end of other tool to hammer the pin lol i sun and liked thank you

@DIYAllied 10 месяцев назад

I'm goofy like that.

@dannystillman1254 Год назад

Looked like a great fix and was easy to do. The pressure unloader worked freely so I put it back in and the problem persisted. Removed and checked again, reinstalled and still no pressure. Any other ideas on what could be the cause is appreciated. Used the unit two weeks ago with no problems.

@jamundell Год назад

I went through same thing. Per the advice of a man who repairs machines like these all the time, I replaced the pump. It worked great all last summer. But unfortunately the pump was $80.

@waimeaguyz9074 Год назад

I'm gonna try it. Thanks in advance.

@robkeshav800 4 года назад

Thank you for your very useful video. I was able to rectify this problem in 5 minutes. Can you suggest any product that we can use in the winter to obviate this problem?

@DIYAllied 4 года назад

As far as I understand this problem it is caused by grit or sand that jams the unloader valve. At least that was the cause for me. I have heard that RV antifreeze can prevent the pump from freezing and ultimately cracking the housing when storing it for the winter. I'm glad to hear that you fixed the problem quickly. Thanks for watching and commenting. Best of luck to you.

@johnterranova6257 2 года назад

Excellent info. Worked for me. Thanks

@DIYAllied 2 года назад

Thank you.

@mikekupper6222 4 года назад

Gotta love RU-vid, that did the trick perfectly 👍👍

@DIYAllied 4 года назад

Awesome.

@Brad.W Год назад

I've got a brand-new 3600 psi Honda GX200 pressure washer that is giving me half pressure brand new when pressing the trigger on the gun put an operation I'm only getting 1900 PSI no matter what nozzle I use when i release the trigger the idle head pressure builds to 4200 PSI and then settles at 4000 psi the unloader adjustment cap was missing that is normally on the screw and the screw itself was slightly bent. Store i bought the machine from wouldn't let me return it as soon as they knew I had already put oil and fuel in it to use it. Fortunately Simpson or rather FNA group seems to think i have a faulty unloader valve and it is bypassing even when I press the trigger on the wand causing me to have low operation pressure so they are sending me a new unloader. Hopefully that solves my issue.

@blueandberrydesign 3 года назад

Is there supposed to be a tiny metal ball that goes into the hole before the unloaded valve?

@bw538 4 месяца назад

Thank you, this fix worked great!

@DIYAllied 4 месяца назад

Thanks for watching and commenting. Thank you so much for the "Super". That's my first one.

@efrainpalma8820 Год назад

Cambie todos los sellos pero no tiene presión, puede ser lo que sacastes en el vídeo ??

@martinlicea73 4 года назад

thank you my friend

@DIYAllied 4 года назад

No problem

@Elktech_vr Год назад

I have the same engine on my pressure washer but I can’t find where the thing id

@BmwMe-uh9sy 3 года назад

What if the pressure washer sprays all the time even though the handle on the wand is not pressed, I even bought a new wand

@peggyalbers1749 5 лет назад

Thank you so much!! This helped me out so much! Do you know, do I have to continue to remove this piece to keep the pressure? The pressure stayed on for about 2 hours and then it stopped. Thanks!

@DIYAllied 5 лет назад

Usually what causes this problem is grit or sand in the water. Sometimes it gets in when you hook up the hose. Sometimes if you are using well water the pump can draw a small amount of sand from the bottom of well.

@pamelaponte3704 4 года назад

I have this type pressure washer with the spring unloader valve. Thee unloader valve moves and I sprayed it with white lithium grease. I have checked absolutely everything I can think of but I still do not get pressure when I engage the wand. Do those types of unloader valves need adjusting?

@DIYAllied 4 года назад

Make sure to remove all the air from the hose and pump by letting the water run through before you start it. It will not build pressure if there is air in the system. It is possible that if it froze that the valves have broken.

@jose0milan625 5 месяцев назад

Gracias seńor por su tips Fue exactly lo que tenia mi pressure washer at fixed graci⭐️⭐️⭐️⭐️⭐️

@raulgomez5357 3 года назад

Muchas gracias funcionó 👌 muy bien saludos desde México

@DIYAllied 3 года назад

Gracias

@luiscarlosaraiza6498 Год назад

No entiendo ingles como es que lo soluciono

@GriftinGuruhunter 5 лет назад

Thank you so much for posting this video. It really helped me out

@DIYAllied 5 лет назад

You are welcome

@renaldas72 2 года назад

It worked for me. Thanks!

@DIYAllied 2 года назад

You are welcome

@joeb6037 3 года назад

Thanks for the great video.... This is just what I needed to fix my power washer 🙂

@DIYAllied 3 года назад

That's awesome. Glad it helped.

@terrysmith3767 Месяц назад

Ive got water shooting out from the pump, i still get pressure and runs fine but seems to be getting worse. Ill try what you did in video. Is there any other seals or gaskets to look for?

@DIYAllied Месяц назад

Not that I know of. Good luck.

@Burgletrouser Год назад

My pressure washer pressure goes up and down.... sometimes it works for a few minutes, sometimes less. The valve is free and clean. Any ideas?

@Dirtydollars020 4 года назад

Mine still doesn’t work .. wonder the issue

@Sean-Aviation Год назад

mine doesn't run the water through the pump at all (engine off). is that unloader valve the cause?

@uliasolo1868 11 месяцев назад

Thanks for tip. It's work for me.

@DIYAllied 10 месяцев назад

You are welcome

@Trying858 4 года назад

looked good thanks

@DIYAllied 4 года назад

You are welcome

@danielbrien1776 Год назад

Thanks ! I'm going to try that Right Now, because I'm have same problem...

@DIYAllied Год назад

Good luck.

@danielbrien1776 Год назад

I just fixed Problem. You are Right. Machine has high pressure Now!!! Thanks a Million!!

@DIYAllied Год назад

@@danielbrien1776 You are welcome.

@richardwarren1687 4 года назад

Thanks for above. If no pressure after aove where to nex?

@DIYAllied 4 года назад

I'd make sure the intake screen is clean, could possibly be a clogged tip or it could be the wrong tip. The blue tip is the soap tip and has very little pressure.

@M_J_Glide_22 Год назад

do you happen to know that part number. I have the same unit and want to replace it.

@richardsam519 2 года назад

Hi my gc190 has a problem its like beep beep if you pull the trigger i have checked everything but it look alright tho.. any idea why its acting like that? change oil done too

@DIYAllied 2 года назад

I'm not sure on that.

@ThisDaNas Год назад

What should I do if I can’t for the life of me get the black plastic part off?

@TheHord 3 года назад

I have one new out of the box and no water comes out even with no pressure hose hooked up and engine is off. Pulled this device out and looks fine, plunger works, but no water will come out the port where the gun hooks up to. Hose valve has plenty of city pressure and only 25ft hose.

@TKO-NY 3 года назад

Figure it out?

@TheHord 3 года назад

No, I really don't know what the issue is, new pump that is bad maybe? I'm calling Snapper support tomorrow, just bought it about 40 days ago at menards, so I'll have to take it in somewhere, it's under warranty.

@johnstafford3467 4 года назад

Thank you for your video. When I turned on the house water, the water go to the low pressure side and start shooting out of the soap tank. Pulling the wand trigger doesn't help and only a trickle of water comes out of the wand. I figure it must be to UV so I remove the clip and start prying on the spring. Didn't budge. I sprayed wd40 on it and let it sit. Still stuck. I put some vice grips on i the spring area and tried to rock it. No movement. I tapped on with a hammer and sprayed more wd40 but no luck. It feels solid. Ideas?

@DIYAllied 4 года назад

Thanks for watching a commenting. If you have the same model and pump, that unloader cable should come out. They have a tendency to rust tight if they have been in there a while. I'm not sure why you would have water coming into the soap tank. Kinda sounds like maybe one of the internal valves maybe stuck.

@glock-hm3ro 4 года назад

I have exactly same problem

@lowprofile2412 3 года назад

@@glock-hm3ro hey, great name. I kind of prefer my nine and 45 millimeter over the 40’s but hey to each their own.

@gergemall 4 года назад

Thank you

@DIYAllied 4 года назад

You are welcome.

@MrKatracho1991 3 года назад

Thanks a lot!! It solved the problem

@DIYAllied 3 года назад

You are welcome

@DIYAllied 3 года назад

👍👍

@DavidB7777 4 года назад

I have a Craftsman 580.768350, it's a Honda GCV160 with 4 small chemical containers. It's dripping water underneath through the brass part below the pump, and when it starts it has some pressure for a second, and when i pull the trigger, off goes the pressure. It doesn't have that spring part visible like in your video. Do you have any suggestions Sir?

@DIYAllied 4 года назад

Is it possible that it froze in storage? If so you could have big problems with the pump. Luckily they are easily replaced and fairly inexpensive. Happened to me once years ago, was leaking water in the same place yours is. Turned out the pump housing was cracked.

@BamaJoeBob Год назад

Should there be a screen in the inlet? Or does the little white valve in there take its place.

@DIYAllied Год назад

Pretty sure there should be a screen.

@aysarabbas9731 3 года назад

I appreciate you

@DIYAllied 3 года назад

Thanks

@Unctahdew 2 года назад

My pump lost most of its pressure. It’s making a bit of a new noise. I checked this and seems that it freely moves. Assuming I have a bad pump then?

@DIYAllied 2 года назад

It could be. The first time I had a pump "failure" was due to loose bolts that allowed for play in the junction between the engine and the pump. Ultimately the pump lost most of its pressure because the shaft was slipping in the pump housing. In that case, I had no choice but to buy and new pump. Good luck and thanks for commenting.

@14PANCHOKID 11 месяцев назад

Thanks Brotha I just fix my problem

@DIYAllied 11 месяцев назад

No problem. Thanks for watching and commenting.

@ernestcarraway5395 2 года назад

Thanks

@DIYAllied 2 года назад

No problem. Thanks for commenting

@coolsoundsoftom4090 5 лет назад

Thank You for this video, you made my day! My other hobby is guitar repair. I took the brass end of my fretting hammer (light, mostly rubber plastic hammer) and tapped the valve housing. Came to life on the second try.

@DIYAllied 5 лет назад

Awesome.

@bazaedwards 4 года назад

I'm trying to find out wy when I let the trigger go the petrol engine stops

@DIYAllied 4 года назад

I would check the unloaded valve. If this valve malfunctions the pressure washer can get stuck in pressure building "mode" and can choke out the engine.