Honda S2000 - Digital Rear View Mirror

Подписаться 351

Просмотров 1,9 тыс.

50% 1

This is a second gen Gentex full display mirror retrofitted on a S2000. The mirror is from a 2019-2021 Camaro and purchased on ebay.
A new mount was printed (3D models linked below) to work with the tilting mechanism of the mirror and all wires have been replaced and rerouted through the back plate. A duplicate license plate lamp connector was printed and spliced into the OEM loom to accommodate a second lamp. The camera is now center mounted with a license plate lamp on either side.
Mirror Model:
GNTX-1573
Misc Parts:
Honda License plate lamp housing: 34102-S2K-013
Honda License plate lamp lens: 34101-S2K-902
3DXTECH CarbonX Carbon Fiber ABS, 1.75mm, 500G 3D Printing Filament:
www.amazon.com...
DAB Radio GPS Antenna Extension Cable Fakra 600-700 cm:
www.ebay.com/i...
3D printed parts:
www.thingivers...
www.thingivers...
www.thingivers...
Music:
Gushito - Flower Bomb (by Kamil Guszczynski)
www.storyblock...

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@THEGABNER 2 года назад

Excellent work dude! I'm looking at this for my cars.

@aphex4000 2 года назад

Thank you!

@niller8p 2 года назад

Wow, this is impressive. I was thinking of getting a new Gentex “universal” version of this but the camera has to be mounted inside the car against the rear windshield. I’ll have to try and read up on what you did here

@VC-GhostRider 6 месяцев назад

I really want to add it into my 2018 Honda CR-V

@DirtDude117 2 года назад

Awesome man!

@aphex4000 2 года назад

Thank you!

@VC-GhostRider 6 месяцев назад

How you able to buy complete set?. Can you share

@uhkordguy 9 месяцев назад

Any chance you'd be willing to create the 3D printed parts/modify the mirror for me, if supplied?

@uhkordguy 9 месяцев назад

and which rear view camera was used?

@niller8p 2 года назад

Which camera did you use for the mirror? Been searching for coax ones that might work but most seem meant for an OEM housing and not something you want to mount on the car exterior

@aphex4000 Год назад

I don't recall the exact model number, but it's the same camera intended for the Camaro. The camera itself is well sealed and the printed housing provides enough extra protection for exterior use in this situation.

@senrusho 2 года назад

Hey, I just found your post on an s2000 forum. I bought one of these mirrors to do this exact same thing on my Jeep and I'm looking for a pinout for the 5 wires in the harness. Do you have that?

@senrusho 2 года назад

I was also wondering if you could tell me what size ball the s2000 (and by extension, your adapter) has.

@aphex4000 Год назад

@@senrusho I don't have the exact dimension of the ball since there is a teflon sleeve that surrounds it. This adapter is designed to accommodate the size/shape of the sleeve, not the ball itself. Additionally, the metal plate on the back that retains both the ball and sleeve in the adapter are part of the OEM S2000 mirror mount. (pics of both items linked below) The best way to go about modifying this mount is to see what the ball joint of the new recipient vehicle looks like and how it's retained, then design around that. Unfortunately, I understand that's a risky proposition since you could cannibalize and perfectly good OEM mirror only to find that it won't be possible to make this mount work with it. Good luck, and let me know if you have any other questions! Sleeve: photos.app.goo.gl/wQn2tphfvRV8eUT88 Back plate: photos.app.goo.gl/SoXwzEpjcVoCcfyQ9

@aphex4000 Год назад

The only two wires I used on the harness are for power (red) and ground (white+black stripe). The mirror retains its setting even with the power completely disconnected.

@melquiadeslemus8115 Год назад

I was wondering how much did you spent on this ?

@aphex4000 Год назад

All in I would estimate just under $400 for everything for this build. It could be less or more depending on the following: - price of the mirror and camera on the used market (I got very lucky on these) - price of parts for second license plate lamp - tools already owned for the build (especially the 3D printer) - miscellaneous materials like connectors for the license plate lamp, filament, wires, etc

@THEGABNER 2 года назад

You didn't happen to start this adventure with a Reddit post?

@aphex4000 2 года назад

There is a post on Reddit with links to a lot of the build photos to help anyone who wants to give this a try. Someone also responded to my post on S2ki with a very well executed 3D printed solution of their own (for a different digital mirror) at the link below. www.s2ki.com/forums/s2000-electronics-26/frameless-digital-rearview-mirror-oem-mount-1211840/