Тёмный

Honda Shadow Carb PERFORMANCE REBUILD KIT 

TJ BRUTAL CUSTOMS
Подписаться 43 тыс.
Просмотров 54 тыс.
50% 1

Don't wait, Get your kit NOW! - shoptjbc.com/products/complet...
Rebuilding your carburetors can be a daunting task and even more so when you don't have the proper parts. That great barn find that has 200 miles on it has been sitting with carbs full of ancient fossil fuels for 15 years and now she's yours. Why mess around with trying to use corroded parts and old rubber seals when you can easily replace them and eliminate these parts a a source of tuning headaches?!?! With this kit you can rebuild your own carbs to better than new condition! This kit is available for Dual and Single carb VT600 models and VT750 models.
Kit contains -
-Float Bowl Gaskets
-Float seats with filter (dual carb only)
-Float Needles
-ACV Gaskets
-Stainless Bolt Replacement Kit
-D Bit (single carb only)
-A/F Long Handle Mix Screw (single carb only)
-Slide Diaphragms
-Vacuum Plugs
-Performance Jet Kit which includes
-Main Jets
-Pilot Jets
-Needle Shims
You will need to remove the two plastic retainer rings on your stock slide in order to install the new diaphragms. A small set of dykes is all that's needed to clip them off. Install the diaphragm gently from the top of the slide. Be careful they can tear easily if you muscle them too hard or install them from the bottom. This diaphragm will hold itself in place in the channel at the top of your slide. When re-installing your slides, make sure the vent hole at the bottom of the slide is facing the cylinder head side of the carb.
Be very careful when installing these diaphragms, they are fragile and soft and can tear very easily.
Once the old diaphragm is removed, install the new diaphragm from the top of the slide dont attempt to shove the thing up from the bottom of the slide. this will guarantee you tear the slide! Use your fingernail to gently push the inner rib into the channel at the top of the slide. again the key word here is GENTLE!
This kit is intended to work with the Velocity Stacks.
Dual Carb Kit Pictured
shoptjbc.com/
---
Like what you see here? SUBSCRIBE to our channel, then make sure you’re following us everywhere else!
Get all the latest updates on new product releases via our Facebook page: / tjbrutalcustoms
Then follow us on Instagram, for all the off-color shit and exclusive content you LOVE: / tjbrutalcustoms
On the hunt for LEGIT BADASS CUSTOM HONDA SHADOW PARTS?! We’ve got ‘em! Check out our shop: shoptjbc.com/. (While you’re there, SUBSCRIBE to our email list at the bottom of the page.)

Опубликовано:

 

6 апр 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 69   
@jacobsuarez6701
ONCE!!👁👁 I love you tj, every problem I've had you have a video for it. Idk what the world would do without you.
@SurviveTribe
@SurviveTribe 4 года назад
When can we expect one of these for the vt1100c
@chris24542
@chris24542 4 года назад
Please let me know when performance kit for the 1100vt will be avalible, I will buy them on the spot
@samuelcolvin4427
@samuelcolvin4427 21 день назад
What are the needle shims for?
@djtomtrain2015
@djtomtrain2015 Год назад
Never done anything carb related ever. Ive just done a clutch. Is it reall that simple? See so many bikes in buddys garages hat just need carb work or they started and just cant get it runnin now.
@mrgrieves2406
@mrgrieves2406 7 лет назад
is this compatible with the honda vlx600 (steed 400) model? as well as the velocity stacks? thanks tj
@bradenarnold5809
@bradenarnold5809 2 года назад
1986 Honda shadow VT700C. WHY WONT IT WORK ON THE 700???
@samuelcolvin4427
@samuelcolvin4427 День назад
So the kit comes with brass needle shims. When I took the slides apart. There was already one silver needle shim. Do the brass ones replace the silver or get added to it?
@jayman7952
@jayman7952 4 года назад
Wish I could get this, I ordered a Chinese kit on eBay 😕
@davidspeer8458
@davidspeer8458 6 лет назад
How do you install the new slide diaphragm
@alanuzueta3529
@alanuzueta3529 5 лет назад
On your website it gives the option of the mix screw not sure what thats for ?
@tommygun1411
@tommygun1411 Год назад
hey there thx for all of your video's helped me allot , just want to ask , what is the size of the 4 shims for the needle ? grts from Belgium
@jimtrent492
@jimtrent492 5 лет назад
what is the diaphragm for on both sides of the dual carbs on a 03 vt750dc? on one side the throttle linkage actually screws in to it. there is two screws that hold the cap on and under that cap is a diaphragm and a spring (well one side of mine has a spring the other does not)
@serafamadeusz9621
@serafamadeusz9621 4 года назад
Hey man, im about to change head gaskets on a 600, do you recommend skimming the head? And re jetting the carb due to a compression difference?
@ogre3675
@ogre3675 3 года назад
I’m in Florida. What would be the best jet setup for me using a set of shorty pipes and a good intake. Not going velocity stack. Anal about sand or dusting out my motor.
@audi_hungryig9768
@audi_hungryig9768 5 лет назад
Hey how’s it going can I use does long mixing screws for my 94 shadow 1100 thanks bro
@tzampini
@tzampini 6 лет назад
Hi TJ. I have a VT1100C2. Is my carb. similar to the one in the 750? Thanks.
@eastcoastfitness
@eastcoastfitness 4 года назад
Will this kit work with an 83 honda shadow 750?
@Tiff-JusticeForKielyC.S.W.S
@Tiff-JusticeForKielyC.S.W.S 2 года назад
Need to know if you can get jet kit and parts for 96 Honda Shadow classic vt1100c2, We've ordered jet kit & parts that say they are the right fit for 96 vt1100c2, & ended up not.
Далее
Easiest Honda Shadow HARDTAIL Conversion
17:49
Просмотров 11 тыс.
Бмв сгорела , это нормально?
01:01
How to Remove + Install Dual Carbs for Honda Shadow
5:12
2000 Honda Shadow VT1100 - Carb Clean!
20:06
Просмотров 5 тыс.
7 Surprising Honda Shadow Facts
7:49
Просмотров 32 тыс.
Honda Shadow VT1100 Carburetor Rebuild - Part 1 of 2
19:27
Worst Honda Ever Made Part 1
11:28
Просмотров 1 тыс.
Honda Shadow 750 (ep22.) Buyer Beware !!!!
23:01
Просмотров 50 тыс.
Carburetor jetting trick [YOU NEED TO KNOW THIS!]
5:18