HOT RACING UPGRADED (32P GEARS) 58t SPUR and 18T PINION for My TRAXXAS SLASH 2WD

Подписаться 20 тыс.

Просмотров 15 тыс.

50% 1

In this video I install the Upgraded Hot Racing 32p Pinion and Spur Gear Conversion (part# STE258) which includes an 18t Pinion and 58t Spur Gear on my Traxxas Slash 2wd
Amazon Affiliate Links -
Hot Racing || STE258 - Pinion and Spur Gear 32p Upgrade for Traxxas Slash 2wd / Bandit 2wd / Rustler 2wd and Stampede 2wd - 18t Pinion and 58t Spur Gear -
amzn.to/3GucY2O
1/10 Traxxas Slash - Blue and Black Baja Bug Body -
amzn.to/3lSRxzd
1/10 Traxxas Slash - Orange and Black Baja Bug Body -
amzn.to/3NcSL40
1/10 Traxxas Slash - Green and Black Baja Bug Body -
amzn.to/38XEwBp
1/10 Traxxas Slash - American Flag Themed Baja Bug Body -
amzn.to/3PIMoaq
1/10 Traxxas Slash - Unpainted Baja Bug Body -
amzn.to/3PRYr5c
1/10 Traxxas Slash - Hot Pink and Black Baja Bug Body -
amzn.to/38vbucd

Авто/Мото

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 96

@alcesspectre 2 года назад

You're right, the cover does fit! I think the 32p gears I used were off a Traxxas Jato or something. No cover for me. Hasn't been an issue beside the occasional pebble stuck in the spur and a lot more dust getting to the bearing behind it.

@RCKnockout 2 года назад

I gotcha…..yeah I didn’t have any problems so I was wondering if you were using some different gears

@chrisjohnson4733 2 года назад

Love the 2wd platform. So many different options.

@RCKnockout 2 года назад

For sure!

@monkeytrident 2 месяца назад

Great video keep up the good work.

@RCKnockout 2 месяца назад

Thanks! I appreciate it!

@BrianW2979 2 года назад

I use those pinions with the double grub screws to make a center spool for my rustler 4x4. I put a grub pin in and it goes right through the hole in the shaft.

@RCKnockout 2 года назад

Nice! I’m sure it works well

@yorkrojas1452 Месяц назад

Thanks a Million!!

@RCKnockout Месяц назад

You’re welcome!

@hotracinghelpdesk7243 Год назад

Another great vid. I just subscribed and look forward to seeing more HR content ;)

@RCKnockout Год назад

Appreciate it!

@ammoniawilder4451 5 месяцев назад

Do y’all make the black front shock tower for 2wd Traxxas still??

@callsignmohas5190 10 месяцев назад

To prevent a lot of buyers remorse it would be really cool if you made a video mainly targeted at first time, 2 Wheel Dr. cheap/buyers and make a video of absolute must have upgrades. I’m sure you have had a lot of trial and error on what aftermarket parts and upgrades have worked great and what ones have been a complete waste of money. It might help a lot of folks out such as myself lol.

@RCKnockout 10 месяцев назад

That’s a good idea…I might have to do that 👍😉

@callsignmohas5190 10 месяцев назад

@@RCKnockout thank you in advance 😆

@thelurker9472 Год назад

Yep, just verified. The 272r transmission has no issues with cover going back on. Thank you. I did run into a slight issue. If you are running a hobbywing maxx10 combo, motor is a 550 size, there is little to no room for adjust gear mesh. Luckily I got it on and mesh is just right, but I'd suggest getting the 56 or 54 tooth spur from hot racing if running the hobbywing max10 combo.

@RCKnockout Год назад

Glad you found it helpful! Yeah I actually ended up gearing mine down…but if you had to…you could use a dremel and make the motor mount slot wider so you could push the motor further from the spur gear and get the mesh set right..

@thelurker9472 Год назад

@@RCKnockout the motor can is as far back as the case will allow. It's why I also ordered a 54t spur and a 15 and 17 pinion, just for options.

@RCKnockout Год назад

@@thelurker9472 oh ok I gotcha…yeah 15 or 16 might be the sweet spot

@michaelthibault557 6 месяцев назад

are these gears though ? i bought a 50 tooth for a 2200kv setup

@edwardnichols4961 2 года назад

Know some like to keep the slash with stock size wheels/tires. I put on Traxxas Talons EXT 2.8 on mine when i run 3s, great improvement on stability. Should try it sometime since yours is built up. May like it. May make a great video too.

@RCKnockout 2 года назад

I have run 2.8 tires before….they were paddle tires though…..didn’t really like the look tbh

@paulclancy2404 2 года назад

😎

@Johnnyeatsitall 2 года назад

Need some help please! I have everything done to my 2wd slash, but it keeps overheating due to the spur gear and pinion gear I’m running! What’s the best setup that doesn’t produce much heat in your slash? It’s 100 degrees today in Memphis Tennessee which isn’t helping much either 😔

@RCKnockout 2 года назад

I haven’t exactly figured that out……I can tell you this gearing is too high for bashing in heat….I had a lot of limp mode issues

@gamercat7004 Год назад

I'm thinking about switching to this but will it affect acceleration and speed? Will it make the motor hot for bashing and speed runs?

@RCKnockout Год назад

Yeah it’ll definitely change the top speed and it’ll probably make the machine run a bit hotter too

@Hbmonkey9 Год назад

I got the 60T/18T hot racing spur and pinion, but I cant get it to fit on my 2wd slash even though it says it should fit. Do you have a video showing the install on the stock transmission? Do I need to dermal out the sway?

@RCKnockout Год назад

You might have to dremel to make it work I’m not sure….I run the 18/58 fine but that is also with the Drag Slash Trans

@No.Soy.Chan. Год назад

If you are running into the same problem I am (the spur and pinion teeth are not close), it's because we need an adapter that we don't have on a stock 2wd, RPM sells a gearbox housing with it.

@joseywilds3133 2 года назад

Good job stay safe 👍🏽

@RCKnockout 2 года назад

Thanks bro!

@thelurker9472 Год назад

So the 272r transmission. Did the transmission gear cover go right back with no issues? Just got a hobby wing setup with a 5mm shaft so I need to go 32 pitch

@RCKnockout Год назад

Yeah it went right on…the Drag Slash transmission cover is slightly different from the regular 272 cover though…I think it’s just different the way it mounts up

@thelurker9472 Год назад

@@RCKnockout good to know. Got my hr 32 pitch gear conversion ordered.

@RCKnockout Год назад

@@thelurker9472 nice man! It should go together pretty easily 😉👍

@Acornejo02 Год назад

Would you say I should get this gears even though I'm still running the brushed stock motor in my Slash 2wd ?? Honestly I just want it but idk why lol 😅

@RCKnockout Год назад

No I wouldn’t recommend it with the brushed system

@gavinc.9785 Год назад

Yeah I got hoplex gears on Amazon. 32p 54t spur and 15t pinion. I have a bigger pinion that I might try because the slipper slutch spins when I take off and has slowish acceleration. It takes off but I can hear the brushed 2wd motor

@gavinc.9785 Год назад

@@RCKnockout should I just get the brushless system right now? I got a used truck from 5 years ago and it worked great until I swapped gears. But I want it to do about 45mph. Do I need a brushless 3s system?

@RCKnockout Год назад

@@gavinc.9785 yeah you’ll need brushless power to go that fast

@joshuapacman 2 года назад

Yo something I noticed place washers under your motor mount screw’s and and have it snug fit might help

@RCKnockout 2 года назад

Maybe…..it is on a metal mount though…..the previous trans was plastic which I think was more susceptible to sliding

@joshuapacman 2 года назад

@@RCKnockout I say this so that the screw’s have more suffice area and a wider sense of tension especially since it’s metal.

@RCKnockout 2 года назад

@@joshuapacman that makes sense….maybe I should do that then

@chuckpg31 Год назад

I put on split washers for motor mount screws And never need those gear adapters they sell. Keeps the screw from Backing out and shifting the motor which strips the gears

@christiansrcs7789 2 года назад

now your talking!!!!! a very good upgrade in my book!!! you might wanna put some washers on the screws that are holding the motor in just from the cameras view it looks like they might slip possibly..

@RCKnockout 2 года назад

Yeah for sure…..I’ve been running it that way for awhile…..haven’t had any issues

@christiansrcs7789 2 года назад

@@RCKnockout good!

@jimmymorris8032 5 месяцев назад

hi what biggest size pinion u can use with this spur gear ? cheers

@RCKnockout 5 месяцев назад

The motor is slid nearly all the way with the 18t…..so you wouldn’t fit a much bigger pinion than that

@jimmymorris8032 5 месяцев назад

ok i see in the photo looks tight. what sort of gearing u think for speed runs? i want run it on 4s @@RCKnockout

@RCKnockout 5 месяцев назад

@@jimmymorris8032 I don’t know…never done speed runs with mine…it all will depend on your power system too

@officialaveryking2001 Год назад

How has the 32 pitch metal to metal gears work for you any issues?

@RCKnockout Год назад

It works well…the esc and motor ran hotter after switching to the 32p gears though

@officialaveryking2001 Год назад

@@RCKnockout check the ratio of what it is now and what it was before might be over the limit

@RCKnockout Год назад

@@officialaveryking2001 yeah it was definitely over-geared for the stock vxl system

@NikkiNexo777 2 года назад

What weight diff oil are you running in the diff?

@RCKnockout 2 года назад

Whatever is stock in a drag slash

@keaginm2791 2 года назад

@@RCKnockout i believe stock is 500k

@RCKnockout 2 года назад

@@keaginm2791 thanks for letting me know!

@michaelthibault557 5 месяцев назад

how are these gears holding up ??

@RCKnockout 5 месяцев назад

They’re holding up well!

@johngantner9314 2 года назад

No worries we have a cat. Hair gets every were

@RCKnockout 2 года назад

I know, right lol

@trentondivins3541 Год назад

I bought all the parts but didn’t realize I can’t run these upgrades on the stock transmission and Ik you said yours is the 272 drag slash transmission but there are so many options on Amazon can you lead me in the correct direction?

@RCKnockout Год назад

Even with the stock trans it should mount up….what kind of issue are you running into?

@trentondivins3541 Год назад

When I mounted up the gears they were hitting the plastic on the back and wasn’t touching the rotor thing (idk what it’s called exactly)

@RCKnockout Год назад

@@trentondivins3541 the spur gear was touching the transmission?

@trentondivins3541 Год назад

@@RCKnockout no the bigger gear was touching the back side of the transmission the plastic part

@RCKnockout Год назад

@@trentondivins3541 yeah it shouldn’t be doing that…it should be a direct fit with the stock transmission